Integrated Drill and Blast Process
-
Upload
yulist-fitrianto -
Category
Documents
-
view
72 -
download
7
Transcript of Integrated Drill and Blast Process
-
INTEGRATED DRILL AND BLAST PROCESS
May 2014
Putu Tanty Astari
-
Drill and Blast will take important thing on miningactivities.
Good Drilling and Blasting result will make theexcavating process runs effectively and can be createdby good blasting design.
MineScape has an integrated drill and blast functions toget a good blast design easily.
Drill and Blast module is integrated with Core, Open Cutand Stratmodel modules.
Drill and Blast Concept
-
MineScape Drill and Blast Capabilities
1. Drill and Blast Schedule Setup
2. Drilling Design Pattern
3. Blast Design Charging
4. Tie Up and Animations
5. Topo Updates Blasting
6. Blast Report
7. Drill and Blast Interface
-
1. Drill and Blast Schedule Setup
RL-33
RL-40
RL-40
Drill and Blast concern in short-termplan design.
Weekly and daily plan is usually usedto determine blast plan schedule.
Weekly and daily plan are created inCore and Open Cut modules and
integrated with drill and blast module.
-
Continue
Blast Plan Schedule Preparation for Drilling Pad elv.47
Blasting schedule for elv.40Blasting schedule for elv.33
RL33
RL33
RL33
RL33RL40
RL47RL47
RL47RL47RL40
RL40RL40
RL40
RL40
-
2. Drilling Design Pattern
Staggered Pattern
Parallels Pattern
B1
S1
B2
S2
-
Continue
Final Wall Design Pattern
End Rows
Start Rows
End Rows
-
Continue
Surface Target Sections
Seam Roof areaElevation limit
-
3. Blast Design Charging
Single Deck Charging
Double Deck Charging
-
4. Tie Up and Animations
Corner Cut Tie Up Method
Center Box Cut Tie Up Method
V Cut Tie Up Method
-
Video
-
Video 2
-
5. Topography Updates Blasting
Updates topography from blasting plan scheduling is used as a reference
for the next blasting plan
-
Continue
Excavating Plan
Elv.47
Elv.47
-
Continue
Elv.40
First Blasting
-
Continue
Elv.40
Elv.40
-
Continue
Elv.40
Elv.40
Elv.40
-
Continue
Elv.40
Elv.40
Elv.40
Elv.40
-
Continue
Elv.40
Elv.40
Elv.40
Elv.40
Elv.40
-
Continue
Elv.33
Elv.40
Elv.40
Elv.47
-
Continue
Elv.33
Elv.33
Elv.40
Elv.40
Elv.47
-
6. Blasting Report
Blasting Report Summary Blast Hole Graphic
-
Continue
Charge Table
-
Continue
Cost Report Hole by Hole
-
Cost Report Summary All Hole
Continue
-
7. Drill and Blast Interface
-
Conclusions
MineScape can support drill and blast engineer tocreate a good design.
Drill and Blast module is integrated with Core, OpenCut, and Stratmodel modules and the result of thosemodules can be used in drill and blast directly.
Drill and Blast module covers drilling pattern and alsoblasting design in one software.
Drill and Blast has an interface tool to directly importthe data to another software.