insulroof®

Leaders in Thermal & Architectural Building Solutions

Technical Drawings v1 - Current 21/05/2018

insulroof®

2 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Constructioninsulroof®

Contents

Panel Details - INR13-PD01-0 ............................................................. 3

Barge Capping Detail - INR13-BC01-0 ................................................ 4

Barge / Parapet Detail - INR13-BC02-0 ............................................... 5

Head Flashing Detail - INR13-HF01-0 ................................................. 6

Ridge Detail - INR13-RD03-0 .............................................................. 7

Insulate Box Gutter Detail - INR13-RD05-0 ......................................... 8

Roof Expansion Joint - INR13-RJ01-0 ................................................. 9

Insulated Valley Boxed Gutter - INR13-RV01-0 .................................. 10

Eaves Gutter Detail 1 - INR13-WC03-0 ............................................. 11

Eaves Gutter Detail 2 - INR13-WC04-0 ............................................. 12

3

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Constructioninsulroof®

Panel Details - INR13-PD01-0

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

INR13 -

Description

Title

11.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

INSULROOF - ROOFING

NTSPD01

PANEL DETAIL

0

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

insulroof®

4 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Construction

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

insulroof®

Barge Capping Detail - INR13-BC01-0

Industrial Roofing & Cladding

ANGLE BRACKETTO FIX WALL PANEL

COLORBOND CAPPINGFIXED TO WALL PANEL

INSULROOF

CLEAT &STRUCTURALSTEEL

PURLINS

4mm ALUMINIUM RIVETS@300CRS (TYP)

14g TEK SCREWS TO EVERYTHIRD CREST. ADDITIONALFIXINGS MAY BE REQUIRED,REFER ENGINEER FORASSESSMENT.

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

INR13 -

Description

Title

11.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

INSULROOF - ROOFING

NTSBC01

BARGE CAPPING DETAIL

IND.ROOFING & CLADDING 0

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

5

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Constructioninsulroof®

Barge / Parapet Detail - INR13-BC02-0

Industrial Roofing & Cladding

4mm ALUMINIUM RIVETS@300CRS (TYP)

4mm ALUMINIUM RIVETS@300CRS (TYP)

4mm ALUMINIUM RIVETS@300CRS (TYP)

14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEER

FOR ASSESSMENT.

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

INR13 -

Description

Title

11.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

INSULROOF - ROOFING

NTSBC02

BARGE / PARAPET DETAIL

IND.ROOFING & CLADDING 0

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

insulroof®

6 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Construction

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

insulroof®

Head Flashing Detail - INR13-HF01-0

Industrial Roofing & Cladding

PROFILED FILLERSEALED TOP AND

BOTTOM IF REQUIRED

TURN UP ROOF PANSTO FULL CREST HEIGHT

(SPECIAL TOOLAVAILABLE)

FOAM SEAL IFREQUIRED

ROOF HEAD FLASHING

PROFILED FILLERSEALED TOP AND

BOTTOM IF REQUIRED

5° MINIMUM PITCH.

4mm ALUMINIUM RIVETS@300CRS (TYP)

4mm ALUMINIUM RIVETS@300CRS (TYP)

14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEERFOR ASSESSMENT.

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

INR13 -

Description

Title

11.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

INSULROOF - ROOFING

NTS

HF01

HEAD FLASHING DETAIL

IND.ROOFING & CLADDING 0

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

7

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Constructioninsulroof®

Ridge Detail - INR13-RD03-0

Industrial Roofing & Cladding

COLORBOND RIDGECAPPING

ROOF SUPPORTSTRUCTURE.

INSULROOF

CYCLONE WASHER (OPTION FORCYCLONIC REGIONS)

COLORBONDCOVERFLASHING

MINERAL WOOLOR FIBRE INFILL

5° MINIMUM PITCH.

14g TEK SCREWS TO EVERYTHIRD CREST. ADDITIONAL

FIXINGS MAY BE REQUIRED,REFER ENGINEER FOR

ASSESSMENT.

TURN UP PANS TO FULLCREST HEIGHT (SPECIAL

TOOL AVAILABLE)

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

INR13 -

Description

Title

11.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

INSULROOF - ROOFING

NTS

RD03

RIDGE DETAIL

IND.ROOFING & CLADDING 0

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

insulroof®

8 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Construction

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

insulroof®

Insulate Box Gutter Detail - INR13-RD05-0

Industrial Roofing & Cladding

BOX GUTTER(INDEPENDENTLYSUPPORTED)

OVERFLOW SPITTERS/ SPIGOT

6x4mm BUTYLRUBBER

COLORBOND "Z"FLASHING

INSULROOF PANEL "CUT BACKS"CARRIED OUT ON SITE.

50mm INSULATEDPANEL

CONCRETE PARAPETWALL

PARAPET AND COVERFLASHINGS

ROOF SUPPORTSTRUCTURE

5° MINIMUM PITCH.

14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEER

FOR ASSESSMENT.

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

INR13 -

Description

Title

11.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

INSULROOF - ROOFING

NTS

RD05

INSULATED BOX GUTTER DETAIL

IND.ROOFING & CLADDING 0

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

9

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Constructioninsulroof®

Roof Expansion Joint - INR13-RJ01-0

Commercial / Domestic Roofing

INSULROOFTURN UP PAN TO FULLCREST HEIGHT (SPECIALTOOL AVAILABLE)

TURN DOWN PANAPPROX 20° (SPECIALTOOL AVAILABLE)

COLORBONDFLASHING

ROOF SUPPORTSTRUCTURE

MINERAL WOOL INFILL(IF REQUIRED) COLORBOND TRIM

FLASHING (IF REQUIRED)

4mm ALUMINIUM RIVETS@300CRS (TYP)

5° MINIMUM PITCH.

14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEER

FOR ASSESSMENT.

14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEERFOR ASSESSMENT.

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

INR13 -

Description

Title

11.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

INSULROOF - ROOFING

NTSRJ01

ROOF EXPANSION JOINT

COMMERCIAL / DOMESTIC ROOFING 0

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

insulroof®

10 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Construction

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

insulroof®

Insulated Valley Boxed Gutter - INR13-RV01-0

Commercial / Domestic Roofing

BOX GUTTER DIMENSIONS AS REQUIRED

BOX GUTTER SUPPORT

TURN DOWN PANAPPROX 20° (SPECIALTOOL AVAILABLE)

ROOF SUPPORTSTRUCTURE

SILICONE SEALANTEACH SIDE

14g TEK SCREWS TO EVERY THIRD CREST.ADDITIONAL FIXINGS MAY BE REQUIRED,

REFER ENGINEER FOR ASSESSMENT.5° MINIMUM PITCH.

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

INR13 -

Description

Title

11.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

INSULROOF - ROOFING

NTSRV01

INSULATED VALLEY BOXED GUTTER

COMMERCIAL / DOMESTIC ROOFING 0

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

11

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Constructioninsulroof®

Eaves Gutter Detail 1 - INR13-WC03-0

Industrial Roofing & Cladding

"Z" FLASHING TO SEALCORE IF REQUIRED.

FASTEN GUTTER BRACKETTHROUGH PANEL WITH BOLT

WASHER AND NUT ASSEMBLY

EAVES GUTTER

ROOF PANEL CUT BACKS CARRIED OUT ON SITE.

ROOF SUPPORTSTRUCTURE

4mmALUMINIUMRIVETS@300CRS(TYP)

5° MINIMUM PITCH. INSULROOF

14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEER

FOR ASSESSMENT.

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

INR13 -

Description

Title

11.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

INSULROOF - ROOFING

NTSWC03

EAVES GUTTER DETAIL 1

IND. ROOFING & CLADDING 0

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

insulroof®

12 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Construction

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

insulroof®

Eaves Gutter Detail 2 - INR13-WC04-0

Industrial Roofing & Cladding

"Z" FLASHING TO SEALCORE IF REQUIRED

EAVES GUTTER

ROOF PANEL CUT BACKS CARRIED OUT ON SITE.

ROOF SUPPORTSTRUCTURE4mm ALUMINIUM

RIVETS @300CRS (TYP)

5° MINIMUM PITCH. INSULROOF

14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEER

FOR ASSESSMENT.

TURN PAN DOWNAPPROX 20° (SPECIAL

TOOL AVAILABLE)

OUTRIGGER FASCIA DETAIL

FASCIA PURLIN

WALL CLADDING

This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.

INR13 -

Description

Title

11.04.2018

Drawing no. Issue

Description InitRevDate

Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099

ABN 44 096 402 934

Scale @A4

DateApplication

INSULROOF - ROOFING

NTS

WC04

EAVES GUTTER DETAIL 2

IND. ROOFING & CLADDING 0

NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.

13

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Constructioninsulroof®

insulroof®

14 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Construction

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

insulroof®

15

Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.

InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018

Standard Constructioninsulroof®

www.bondor.com.au

1300 300 099

BRISBANE/EXPORT 103 Ingram Road Acacia Ridge QLD 4110 Ph: (07) 3323 8500 Fax: (07) 3323 8501

PERTH 17 Gauge Circuit Canning Vale WA 6155 Ph: (08) 9256 0600 Fax: (08) 9256 0620

ADELAIDE 70-72 Rundle Road Salisbury South SA 5106

Ph: (08) 8282 5000 Fax: (08) 8282 5099

MELBOURNE 329A St Albans Road Sunshine VIC 3020 Ph: (03) 8326 8000 Fax: (03) 8326 8099

LAUNCESTON 7 Connector Park Drive Kings Meadows TAS 7249

Ph: (03) 6335 8500 Fax: (03) 6335 8544

SYDNEY 49-53 Newton Road Wetherill Park NSW 2164

Ph: (02) 9609 0888 Fax: (02) 9729 1114

Leaders in Thermal & Architectural Building Solutions

Metecno Pty Limited. ABN 44 096 402 934. The manufacturer reserves the right to change the specification without notice. Bondor®, Equitilt®, BondorPane®, FlameGuard®, MetecnoPanel®, EconoClad®, MetecnoKasset®, InsulWall®, LuxeWall®, DesignerWall®, SolarSpan®, InsulRoof®, MetecnoSpan®, Purline®, Equideck®, InsulLiving®, Metecno are trademarks of Metecno Pty Limited. BlueScope, Colorbond®, Permagard® and colour names are trademarks of BlueScope Steel Limited. Microban® is a registered trade mark of the Microban Products Company. The colours shown in this publication have been reproduced to represent actual product colours as accurately as possible. However, given printing limitations, we recommend checking your chosen colour against an actual sample before placing orders. This advice is of a general nature only. Designers must provide for adequate structural performance and other Building Code requirements. This information is subject to change. Refer to Bondor® website for latest version. Consult Bondor® for your application.

BON0535 Drawing Pack - InsulRoof v1 21/05/2018