Instruments for Endoscopic Forehead Lift Procedures · 2 KARL STORZ 96062008 PL-SUR 8 1.2...
Transcript of Instruments for Endoscopic Forehead Lift Procedures · 2 KARL STORZ 96062008 PL-SUR 8 1.2...
P L - S U R 8 1 1 / 2 0 1 7 - E
Instruments for Endoscopic Forehead Lift Procedures
2
© K
AR
L S
TOR
Z 9
6062
008
PL-
SU
R 8
1.2
11/
2017
/EW
Instruments for Endoscopic Forehead Lift Procedures
In recent years, the endoscopic forehead lift technique has proven to be gentle but reliable – in part thanks to continuous advancements in medical instruments.
KARL STORZ contributes to the development of minimally invasive plastic surgery with excellent and versatile instrument sets, and in collaboration with Prof. Hönig, the company has now expanded its product range with a V-tunnel guide.
This new instrument enables precise V-tunnel drilling, which is used for the internal fixation of soft tissue in endoscopic forehead lift procedures. V-tunnel drilling is facilitated since the guide can be fixed in only two positions by slight lifting. First, the support of the instrument is placed on the calvarium, and small spikes on the underside prevent slipping. Then, the drill is inserted into the guide and two holes are drilled. The holes are less than 4 mm deep and are limited by a stop ring on the drill. The two holes create the desired V-tunnel.
Sutures are guided through this V-tunnel and hence can be easily positioned without injuring the cerebrum. The use of pins and screws for anchoring the suspended skin of the forehead in the desired position is therefore eliminated in the forehead lift procedure.
This innovative guide continues in the tradition of KARL STORZ products – by efficiently facilitating procedures.
3
© K
AR
L S
TOR
Z 9
6062
008
PL-
SU
R 8
1.2
11/
2017
/EW
Endoscopic Forehead Lift – HÖNIG Recommended Set
4
© K
AR
L S
TOR
Z 9
6062
008
PL-
SU
R 8
1.2
11/
2017
/EW
HÖNIG Recommended Instrument Set for Endoscopic Forehead Lift Procedures
50230 BA
50200 L
50200 L Optical Retractor, with handle, width of distal end 8 mm, with fixation screw for control of penetration depth of endoscope, with Telescope Sheath 50200 LS, for use with HOPKINS® telescopes diameter 4 mm, length 18 cm
50230 BA HOPKINS® Forward-Oblique Telescope 30°, enlarged view, diameter 4 mm, length 18 cm, autoclavable, fiber optic light transmission incorporated, color code: red
5
© K
AR
L S
TOR
Z 9
6062
008
PL-
SU
R 8
1.2
11/
2017
/EW
50241 OS
50241 OS CLICKLINE Dissector, single action jaws, curved jaws, with 4 locking positions, triangular-shaped, blunt, with straight sheath, width of spatula 12 mm, size 7 mm, length 14 cm,
including: Thumb Handle Metal Outer Sheath Working Insert Dissector
58210 AGA Raspatory, curved, width 9 mm, working length 15 cm
58210 GGA Raspatory, curved, arc-shaped spatula, width 9 mm, working length 15 cm
58210 LGA Raspatory, curved, for lifting and dissecting the orbita rim periosteum, distal end of spatula 90° curved upwards, upper part sharp, width 9 mm, working length 15 cm
58210 AGA
6
© K
AR
L S
TOR
Z 9
6062
008
PL-
SU
R 8
1.2
11/
2017
/EW
50239 GW
50203 DR
50239 GW CLICKLINE Scissors, dismantling, non-rotating, with 4 locking positions, double action jaws, serrated, curved, horizontal opening, curved sheath, size 5 mm, length 18 cm
including: Metal Handle Outer Sheath with Scissors Insert
50203 DR Coagulation Suction Tube, L-shaped, hook curved to right, curved sheath, diameter 5 mm, working length 15 cm
7
© K
AR
L S
TOR
Z 9
6062
008
PL-
SU
R 8
1.2
11/
2017
/EW
50203 BH
50203 BH TAKE-APART® Bipolar Forceps, with connector pin for bipolar coagulation, with irrigation connector, with fine jaws, width 1.5 mm, size 5 mm, length 15 cm
including: Bipolar Ring Handle Outer Sheath TAKE-APART® Forceps Insert
50173 AM
50173 AM Suture Passer, for endoscopic forehead-lifting, size 2.8 mm, length 17 cm
8
© K
AR
L S
TOR
Z 9
6062
008
PL-
SU
R 8
1.2
11/
2017
/EW
50200 DS V-Tunnel Drill System, with handle, with three teeth for secure fixation on the cranium, with rotating drill guide, for use with Drills 50200 DB/DK
including: Drill Guide Handle, with plate Fixation Screw
50200 DK Drill, with penetration stop, diameter 1.3 mm, length 7.5 cm, for use with V-Tunnel Drill System 50200 DS
50200 DB Same, diameter 2.1 mm
50200 DS
9
© K
AR
L S
TOR
Z 9
6062
008
PL-
SU
R 8
1.2
11/
2017
/EW
Notes
10
© K
AR
L S
TOR
Z 9
6062
008
PL-
SU
R 8
1.2
11/
2017
/EW
Notes
11
© K
AR
L S
TOR
Z 9
6062
008
PL-
SU
R 8
1.2
11/
2017
/EW
It is recommended to check the suitability of the product for the intended procedure prior to use.
Notes
9606
2008
PL-
SU
R 8
1.2
11/
2017
/EW
-E
KARL STORZ SE & Co. KG Dr.-Karl-Storz-Straße 34, 78532 Tuttlingen/Germany Postbox 230, 78503 Tuttlingen/Germany Phone: +49 (0)7461 708-0 Fax: +49 (0)7461 708-105 E-Mail: [email protected]
www.karlstorz.com