Part #???

Revised ??????

Part # FAST4-197 Revised 11/14/12

FAST™

3400 Democrat Rd.

Memphis, TN 38118

Phone: 901.260.3278

Toll Free: 1.877.334.8355

www.fuelairspark.com

304147 FAST™

EZ-EFI® Cable Bracket Kit

Thank you for choosing FAST

™ products; we are proud to be your manufacturer of choice. Please

read this instruction sheet carefully before beginning installation, and also take a moment to review the

included limited warranty information. Contact us toll free at 1.877.334.8355 or at

www.fuelairspark.com under Tech Help with any questions.

Part Number Part Description Qty

304150BP Base Plate 1

304150BKT1 Slotted Square Throttle Bracket 1

304150BKT2 Closed Square Throttle Bracket 1

304150BKT3 Slotted Circle Throttle Bracket 1 304150BKT4 Closed Circle Throttle Bracket 1

304150TKCB Bracket, Transmission Cable 1

304150THLN Locknut, SS Nylon-Insert Thin Hex, 10-32 4

304150SHCS Screw, SS Socket Head Cap, 10-32, ½" LG 4

304150FW Flat Washer, SS, Size #10 8 304150SPR1 Spring, Outer, Throttle Return 1

304150SPR2 Spring, Inner, Throttle Return 1

304150TRCONN Transmission Connector Kit (Includes throttle stud, two 3/8" nuts, a 3/8" bolt and corrector plate)

1

INSTRUCTIONS

http://www.fuelairspark.com/

Part #???

Revised ??????

Part # FAST4-197 Revised 11/14/12

FAST™

3400 Democrat Rd.

Memphis, TN 38118

Phone: 901.260.3278

Toll Free: 1.877.334.8355

www.fuelairspark.com

1. Place the base plate over the studs with the logo facing up, then replace and tighten the nuts.

700R4 Cut-outs

Throttle Cable Slot

Throttle Cable Brackets Transmission Bracket

Throttle Body

Mounting Holes Spring

Mount

Hole

Transmission Cable Slot

TCI® TV Cable Corrector

Base Plate

Base Plate

Due to variation in OE and aftermarket applications, we cannot say which throttle

bracket will fit your vehicle. Please match the shape of one of these included

brackets with your throttle cable housing.

Part #???

Revised ??????

Part # FAST4-197 Revised 11/14/12

FAST™

3400 Democrat Rd.

Memphis, TN 38118

Phone: 901.260.3278

Toll Free: 1.877.334.8355

www.fuelairspark.com

2. Slip the inner spring through the outer spring and attach the long hook ends through the base plate

spring mount hole first.

3. Rotate the springs downward to attach the loose ends to the throttle lever spring hole as shown. Long hook ends should be routed underneath the base plate.

4. Select the throttle cable bracket for your application, then use washers between the bolt heads and nuts and loosely mount the throttle cable bracket to the base plate. Then insert the throttle cable.

The final steps of the installation depend upon the model of the transmission in the vehicle.

Go to Sheet (a) for GM 700R4, Sheet (b) for Ford AOD and Sheet (c) for other transmissions.

Long Hook Ends Short Hook Ends Outer Spring

Inner Spring

Part #???

Revised ??????

Part # FAST4-197 Revised 11/14/12

FAST™

3400 Democrat Rd.

Memphis, TN 38118

Phone: 901.260.3278

Toll Free: 1.877.334.8355

www.fuelairspark.com

Sheet (a) is for use only with a GM700R4 transmission. 5a. The included corrector plate must be bolted to the throttle lever. Place the plate over the

throttle and transmission cable holes, then fasten the plate using the throttle stud and supplied

bolt as shown. Now clip the throttle cable to the throttle stud. Next, tension the throttle cable

appropriately by sliding the throttle bracket and tightening it down to the base plate.

6a. The base plate has notches dedicated to the 700R4. Slide the transmission bracket so that the

mounting screws fit into both notches and the bracket faces the throttle body. Insert the bolts

and tighten the nuts. Be sure to use the supplied washers under both the bolt heads and nuts.

7a. Place the TV cable housing into the transmission bracket and attach the TV cable end to the

corrector. The cable still needs to be tensioned. Adjust the cable using the OEM procedure if

possible. To do this with a “D” button-type cable, first reset the cable by pressing the button

to slide the cable back into its housing and then releasing the button. Some cables must also

be set to length. If your cable has an adjustable end stop, see note below. Then, with the

transmission end of the cable already installed, cycle the throttle open and closed multiple

times to achieve proper adjustment.

700R4

Cutouts

Note: Some cables require the cable length to

be set by adjusting the cable end stop. If you

are using this style cable, loosen the set screw

on the cable end stop and slide it until it is

touching the transmission cable clip. Now

tighten the set screw and follow the adjustment

procedure above.

Bolts line up with

700R4 cutouts

Corrector

Face bracket to throttle body.

Part #???

Revised ??????

Part # FAST4-197 Revised 11/14/12

FAST™

3400 Democrat Rd.

Memphis, TN 38118

Phone: 901.260.3278

Toll Free: 1.877.334.8355

www.fuelairspark.com

Sheet (b) is for use only with a Ford AOD transmission.

5b. The included corrector plate must be bolted to the throttle lever. Place the plate over the

throttle and TV cable holes, then fasten the plate using the throttle stud and supplied bolt as

shown. Now clip the throttle cable to the throttle stud. Next, tension the throttle cable

appropriately by sliding the throttle bracket and tightening it down to the base plate.

6b. Loosely fasten the transmission bracket to the underside of the base plate. Then push the cable

housing into the bracket.

7b. Clip the transmission cable to the stud on the corrector. Adjust the cable using the OEM

procedure if possible. Otherwise, adjust the location of the transmission bracket to ensure that

the cable is pulled all the way out at full throttle. While the transmission cable is correctly

adjusted, tighten the transmission bracket mounting bolts. Be sure to use the supplied washers

underneath the bolt heads and nuts. Installation is complete.

Corrector

Transmission Cable

Part #???

Revised ??????

Part # FAST4-197 Revised 11/14/12

FAST™

3400 Democrat Rd.

Memphis, TN 38118

Phone: 901.260.3278

Toll Free: 1.877.334.8355

www.fuelairspark.com

Sheet (c) is for use with any other transmission. 5c. Fasten the throttle cable stud to the pulley and clip the throttle cable to it. Now, tension the

throttle cable appropriately by sliding the throttle bracket and tightening it down to the base

plate.

Skip the remaining steps if your transmission does not use a kickdown or TV cable.

(For example, manual transmissions)

6c. Loosely fasten the transmission bracket to the underside of the base plate. Then push the cable

housing into the bracket.

7c. Clip the cable end to the OE transmission cable stud on the throttle lever and adjust the cable

using the OEM procedure if possible. Otherwise, adjust the location of the transmission

bracket to ensure that the cable is pulled all the way out at full throttle. While the transmission

cable is correctly adjusted, tighten the transmission bracket mounting bolts. Be sure to use the

supplied washers underneath the bolt heads and nuts. Installation is complete.

Part #???

Revised ??????

Part # FAST4-197 Revised 11/14/12

FAST™

3400 Democrat Rd.

Memphis, TN 38118

Phone: 901.260.3278

Toll Free: 1.877.334.8355

www.fuelairspark.com

Limited Warranty

FAST™

LIMITED LIFETIME WARRANTY AND LIMITED WARRANTY

FAST™ warrants that its EZ-EFI™ products are free from defects in material and workmanship for the lifetime

of the product. This Limited Lifetime Warranty shall cover only the original purchaser. All other FAST™ products are covered by a Limited Warranty which covers defects in material and workmanship for a period of

one year from the date of purchase.

FAST’s obligation under this warranty is limited to the repair or replacement of its product. To make a

warranty claim, the part must be returned directly to FAST™ at the address listed below with a valid Return

Merchant Authorization Number (RMA), freight prepaid. Items covered under warranty will be returned to you

freight collect. To obtain an RMA, call 877-334-8355 to report the issue you are experiencing. At that time, FAST™ will attempt to trouble shoot your issue.

It is the responsibility of the installer to ensure that all of the components are correct before installation.

We assume no liability for any errors made in tolerances, component selection or installation.

There is absolutely no warranty on the following:

A. Any parts used in racing applications or subject to excessive wear;

B. Any product used in marine applications, unless that product is listed by FAST™ as a specific marine product;

C. Any product that has been physically altered improperly installed or maintained;

D. Any product used in improper applications, abused, or not used in conjunction with the proper parts.

There are no implied warranties of merchantability or fitness for a particular purpose. There are no warranties which extend beyond the description of the face hereof. FAST™ will not be responsible for

incidental and consequential damages, property damage or personal injury damages. Where required by

law, implied warranties or merchantability and fitness are limited to terms outline above.

This warranty gives you specific legal rights and you may also have other legal rights which vary from state to

state.

Social Media

Stay up-to-date with the latest FAST™ and COMP Performance Group™ company and

product information by following us on any of our social media platforms.