Voice-Activated Personal Data Recorder/Field Data Recorder (PDA ...
INSTRUCTION MANUAL Sherlock 3.0 Covert USB Voice …...now in Voice Activated mode. The Sherlock 3.0...
Transcript of INSTRUCTION MANUAL Sherlock 3.0 Covert USB Voice …...now in Voice Activated mode. The Sherlock 3.0...
Thank you for purchasing from SafetyBasement.com! We appreciate your business.We made this simple manual to help you enjoy your new product as quickly and easily as possi-ble.Be sure to check the TECH SUPPORT tab on your product page at SafetyBasement.com for the latest available manual.
INSTRUCTION MANUAL
Revised: Jan 7th, 2016
Sherlock 3.0 Covert USB Voice Recorder SB-VX0188
Page 2
PRODUCT MANUAL SHERLOCK RECORDER: VX0166
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
PRODUCT REFERENCE
RECORDOFF
PLAY BACK
Volume down/ NEXT FOLDER
Volume UP/ NEXT FILE
Headphone/USB adapter
Indicator light
Pocket clip
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
Page 3www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
PACKAGE CONTENT
USB Adapter Sherlock 3.0 Recorder
Headphones
Page 4
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
CHARGING: Please fully charge unit before first unse. CHARGE ONLY VIA COM-PUTER USB PORT. DO NOT CHARGE VIA PORT FROM WALL OUTLET. MAY DAMAGE UNIT DUE TO POTENTIAL VARIABILITY OF POWER FROM WALL OUTLET. COMPUTER
NO
YES
CHARGING:
PRODUCT MANUAL SHERLOCK RECORDER: VX0166
Page 5www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
BEFORE FIRST USE - TIME STAMP
PLEASE NOTE: The time stamp has to be set each time you turn device OFF then ON. Begin by connecting USB adapter to Sherlock recording device. Then connect to your computer USB port. See diagram below: recorder.1. Make sure your recorder is in OFF position then PLUG it into your USB port on your
computer. Please connect DIRECTLY to your computers USB port. (not via a hub)2. A window will pop up. Select OPEN FOLDER TO VIEW FILES, OR if a window does not
pop up, go to START menu>COMPUTER, then select the apropriate drivers that corresponds to what you jsut plugged in 9Sherlock)
USB Adapter
Sherlock Voice Recorder
Page 6
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
If you are using WINDOWS operating system, file will usually show up as ‘NO NAME’. In this case the driver shows up as E but it may show up as a different letter on your computer. Click this file and the items on the right will show up.
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
Page 7www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Double click this file.
Double click this file.
Time successfully set. After this point, please close all windows BEFORE you unplug device from com-puter
Page 8
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
PRODUCT MANUAL SHERLOCK RECORDER: VX0166
Page 8www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
VOICE RECORDING
VOICE ACTIVATED MODE
Hold this button down, and while it is still down turn this button to ON position.after turning button to On position, the indicator light will turn on steady for a few seconds. Continue holding ‘-’ button until steady red light turns off. release both. Red light will then blink 3 times and turn off. You are now in Voice Activated mode.
The Sherlock 3.0 voice recorder can be set to record in continuous or voice-activated mode. RECORD in CONTINUOUS MODE: This unit is defaulted to continuous recording. If you prefer it in this mode, then simply turn switch to ON and you are all set. Place it where you need to record.
RECORD in VOICE ACTIVATED MODE: To record in voice mode, hold the (volume down)- button then turn unit ON. Continue holding the volume down button until the red indicator light turns on, blinks three times and turns off. Release. Your unit is now engaged to work in voice activated mode. Place unit where you need. (Please test feature to ensure it is engaged before deploying) RECORD while PLUGGED IN: Move Power Switch to “ON” position THEN connect USB cable to charge the device, press and hold “ + ” “ – ” together until the Indicator Light goes off, the device will start the recording when charging. MONITOR RECORDING: Move Power Switch to “ON” position (make sure the headphone is not plugged in), press and hold “ + ” “ – ” together until the Indicator Light goes off, then plug in headphone, you can listen to the current recording
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
Page 9www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Encryption can only be achieved AFTER you have made a recording. If you want to password protect/Encrypt your recordings, do the following: To encrypt your recordings: 1. Create a new folder with a different name other than the default name of RECORD.2. Copy the UHJJM.EXE file from the ‘Encryption’ folder and copy it into the new folder you just created. (the example in our case is ‘Encrypted Folder’. See image on next page3. Move all the files you wish to protect into this new folder (from the RECORD folder) 3. Now go to this ecryption folder and double click the UHJJM.EXE application 4. Enter password in space provided. Re-enter password in second text box. 5. Click the RIGHT button to SAVE or left to CANCEL. You MUST remember your password. Forgotten passwords cannot be recovered and all files in the encrypted folder will be lost if you forget password. You must remember your password to UNENCRYPTED an encrypted folder!
VOICE RECORDING ENCRYPTION
CANCELCONFIRM
Page 10
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
VOICE RECORDING ENCRYPTION..con-
Once you encrypt the folder, you will no longer see the files in the folder. You will only see the encryption software. You will need to double click the encryption software, then enter the password then the files will magically appear after entering password.
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
Page 11www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
After encrypting a folder, you can reverse the action. 1. Go the the encryptic folder and double click the encryption software 2. Enter your password then before pressing confirm, check the last radio button
VOICE RECORDING DECRYPTION
Enter password here
Check this button before pressing the confirm button. This will allow you to remove folder from ENCRYPTION state. Please note: In order to delete an encrypted folder, you have to decrypt it first. Cannot be deleted while it is encrypted.
CONFIRM button
Page 12
PRODUCT MANUAL SHERLOCK RECORDER: VX0166
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Optional Accessory:
If you bought the optional mini playback speaker, please read this page. If not proceed to next page.
Ensure there is ‘AAA’ battery
Before plugging in to recorder, do the following: 1. Turn power on speaker to ON 2. Make sure Sherlock recorder is in OFF position 3. Plug in speaker to Sherlock recorder4. Turn Sherlock recorder to ON positon5. Files on your recorder should start plaing back in a few seconds 6. Adjust volume to your comfort level 7. When done TURN OFF VOICE RECORDER BEFORE unplugging speaker. NOTE: While a headphone or speaker is plugged in, The Sherlock voice recorder will not record!
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
Page 13www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524 Page 13
PRODUCT MANUAL SHERLOCK RECORDER: VX0166
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
PLAYING BACK RECORDINGSIMPORTANT: MAKE SURE DEVICE IS IN OFF POSITION PRIOR TO PLUGGING TO YOUR COMPUTER OR PLUGGING IN YOUR HEADPHONES.
There are two ways to play back your recordings:
HEADPHONES (or the optional speaker mentioned on previous page): 1. Make sure voice recorder is in OFF position 2. Plug in included headphones3. Turn switch to PLAY BACK position4. You will hear the mp3 files playing by default. To skip to the RECORD folder, press the ‘-’ button. This will skip to your recordings. The ‘-’ button becomes a ‘Folder Skip’ command when headphones are plugged in. And if you press and hold the same button it decreases volume. 4. You should start hearing the first file play as soon you turn to ON 5. Please note that the files will be played sequentially. You will not be able to skip to a different file or fast forward. This feature is possible if you listen via your computer
RECORDOFF
PLAY BACKHeadphone/USB adapter
Page 14
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
COMPUTER: 1. Make sure device is in OFF position/2. Plug to computer USB port 3. Open pop up folder and then open RECORD folder to view recorded files 4. Double click the file you wish to listen to
Volume down/ NEXT FOLDER
Volume UP/ NEXT FILE
Indicator light
NEXT FOLDER: Press ‘-’ button NEXT FILE: While you are in a given folder, press the ‘+’ button to skip to next file VOLUME UP/DOWN: While listening to a file you can increase or decrease the volume by hold-ing down the ‘+’ or ‘-’ buttons. release when required volume level is achieved.
These commands work while headphones are plugged in:
PLAYING BACK RECORDINGS
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
Page 15www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
DELETING RECORDINGS VIA RECORDER:
HOW TO DELETE FILE: when playing a file, press and hold “ + ” “ – ” buttons together to enter Delete Mode, and the Indicator Light will turn purple. Delete Single File: in Delete Mode, press “ + ” or “ – ” button will delete current file, the Indicator Light will turn blue and blink fast.Delete All Files: in Delete Mode, press and hold “ + ” “ – ” buttons together to delete all files, the Indicator Light will turn red and blink fast*Note: to prevent deletion mistake, we highly recommend you to conduct file deletion when con-nected to PC.
DELETING RECORDINGS VIA COMPUTER (Very important for MAC users)
• On PC, highlight the files on your device you wish to remove, then DELETE normally. Now, with the device still plugged in, go to your Recycle Bin and EMPTY it. This will remove ALL files in your Recycle Bin, including files that were NOT on your Jooney Bug. Proceed carefully! These files will be gone forever.
• On Mac, highlight the files on your device you wish to remove, then DELETE normally. THEN, with the device still plugged in, go to your Trash Can on our PC and EMPTY it. This will remove ALL files in your Trash Can including trash files on your device. For some reason, MAC computers create invisible trash files on the device you are deleting from. You will not see the files but over time your memory will be full because the deleted files are still on the device. By deleting your trash files on your computer right after you delete the files from your device will your device be truly rid of the deleted files. Proceed carefully! These files will be gone forever.
UNPLUGGING YOUR DEVICE from your computer
• For best operation of your device, be sure to remove or “eject” it properly from your PC or Mac BEFORE you unplug it from the USB port. This will let your computer properly close its connection to the device.
• On Windows, choose MY COMPUTER. Located your device, shown as a Removable Drive, such as Drive E: or Drive F: RIGHT-CLICK on the drive, and choose EJECT. Wait until Windows says it is safe to remove your device, then unplug.
DELETING RECORDINGSNOTE: We recommend deleting files via your computer. You can use the method shown below however it is easy to unintentionally delete files you did not intend. Please proceed with caution. MAC USERS PLEASE NOTE: Please note carefully how to delete files. Read the entire section!!
Page 16
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
PRODUCT MANUAL SHERLOCK RECORDER: VX0166
Page 16www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Video Format N/AAudio quality 192 kbps
Photo Format N/APhoto Resolution N/A
Memory 8 GB
DEVICE SPECIFICATIONS
PRODUCT MANUAL Jooney Bug Eye : SB-BUG100
Page 17www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524 Page 17
PRODUCT MANUAL SHERLOCK RECORDER: VX0166
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
Your Windows PC or Mac has built-in software that will play most of the files created by devices like yours. However, if you are having problems playing your files, or need more options, please download and try these programs.
This software is free and can be downloaded directly from the links below. You can find support and tutorials for these programs on their respective websites. SafetyBasement can not provide software support for these programs
As with ANY files you download from the internet, be sure to scan them for viruses using your particular virus scanner. While most users report no issues using this software, we can not be responsible for any damage caused by this software. Please proceed carefully. Back up your PC before installing any new software.
VIDEO PLAYBACK - VLC(http://www.videolan.org/vlc/index.html)The VLC Media Player can play almost any video or audio file type. There is a version for Windows and for Mac OS X.
VIDEO EDITING for WINDOWS - MOVIE MAKER 2012(http://windows.microsoft.com/en-US/windows/get-movie-maker-download)Movie Maker is a simple video editing program from Microsoft. Please go to this link, and choose the download for your version of Windows. Please note: Movie Maker is part of the Windows Essentials package.
VIDEO EDITING for MAC OS X - iMOVIE(Visit the Apple Mac App Store for latest version)iMovie is a simple video editing program from Apple. It comes installed with your new Mac. The latest version is also available at the Mac App Store at additional cost.
AUDIO PLAYBACK and EDITING - AUDACITY(http://audacity.sourceforge.net/)Audacity is a popular audio editing program used by amateurs and professionals to edit simple and complex audio projects. You can use Audacity to convert your audio files to another format, such as MP3. There is a version for Windows and Mac OS X.
PHOTOSYour Windows and Mac computers have the ability to do basic editing of photos built in.
SUGGESTED SOFTWARE