Instruction Manual - KOMATSU · PDF file- 1 - KOMTRAX Instruction Manual (For North America...

- 1 -

KOMTRAX

Instruction Manual

(For North America and Southeast Asia, the 1st edition)

Issued on January 31, 2015

Komatsu Industries Corp.

- 2 -

■Contents 1.1. Formation of KOMTRAX ........................................................................................................ 3

1.2. Necessary device and environment ........................................................................................ 4

1.3. Exemption clauses ................................................................................................................... 4

2. Basic Instructions ........................................................................................................................... 5

2.1. Internet connection .................................................................................................................. 5

2.2. Login ......................................................................................................................................... 5

2.3. Logout ....................................................................................................................................... 5

3. Explanation of Screen and Operation ........................................................................................... 6

3.1. Explanation of screen .............................................................................................................. 6

4. Definition of Time and Times on display ...................................................................................... 7

5. Current Production ......................................................................................................................... 8

6. Production History ........................................................................................................................ 10

7. Machine Library ............................................................................................................................ 11

8. Machine Running Status .............................................................................................................. 12

9. Specified Period Running Status ................................................................................................. 13

10. Daily Report 1 (report output: part number control, list type) .............................................. 14

11. Daily Report 2 (report output: part number control, band graph type) ................................ 15

12. Maintenance Inspection Information ...................................................................................... 16

13. Event History............................................................................................................................. 18

14. Modify Machine Information .................................................................................................... 19

15. Other Functions......................................................................................................................... 20

15.1. Search Criteria ................................................................................................................... 20

15.2. Sort ...................................................................................................................................... 20

15.3. CSV Download .................................................................................................................... 20

15.4. Modify user information .................................................................................................... 21

15.5. Change Password ............................................................................................................... 21

16. Operator Administration .......................................................................................................... 22

17. Contents Added with Upgraded Software Version for Machine ............................................ 23

17.1. Current Production ............................................................................................................ 23

17.2. Machine Running Status ................................................................................................... 24

17.3. Specified Period Running Status ...................................................................................... 26

17.4. Daily Report 1 (report output: part number control, list type) ....................................... 27

17.5. Daily Report 2 (report output: part number control, band graph type) ......................... 29

- 3 -

Introduction

The KOMTRAX is a system that operation status of the machine is automatically collected

and can be seen and controlled through Internet.

1.1.1.1.1.1.1.1. Formation of KOMTRAXFormation of KOMTRAXFormation of KOMTRAXFormation of KOMTRAX

The KOMTRAX System consists as shown below:

(1) The KOMTRAX terminal continuously watches and measures conditions of the machine

on which it is incorporated.

(2) The measured data are sent out to the KOMTRAX Server (at Komatsu Computer Center)

via portable and wireless transmission channel every one hour.

(3) The data are accumulated and aggregated on the KOMTRAX Server.

(4) Operation conditions of the machine can be taken out in the form of tables and graphs

through the Internet.

Client's machine

Control panel

KOMTRAX

Terminal

External antenna KOMTRAX

Server

Portable and wireless transmission

Internet

Client's PC

* The PC for WEB browsing and Internet environment have to be prepared by the clients.

KOMATSU

Client's company

- 4 -

1.2.1.2.1.2.1.2. Necessary device and environmentNecessary device and environmentNecessary device and environmentNecessary device and environment

■ PC for Internet connection

It is recommended to browse with the resolution of 1024 × 768 (XGA) or higher.

■ Internet connection channel

Internet Explorer (Version 7.0 or later is recommended.)

Google Chrome (Version 39.0.2171.71 or later is recommended.)

■ Software for PDF files (Adobe Reader etc.)

The Adobe Reader can be downloaded free from the below link.

http://adobe-reader.joydownload.net/

Above articles are requested to prepare by the client.

1.3.1.3.1.3.1.3. EEEExemption clausesxemption clausesxemption clausesxemption clauses

Following items are out of our obligation with this system:

(1) We do not guarantee accuracy of the information provided by us.

(2) The system may be interrupted for maintenance without prior notice.

(3) Obtaining information may be impossible or unstable depending on the location of the

machine since the portable and wireless transmission channel is used.

(4) The KOMTRAX WEB screens and software shall be subject to change without prior notice

for improvement.

(5) The contents of this manual shall be subject to change without prior notice. No part of this

manual shall be reproduced.

- 5 -

2.2.2.2. Basic InstructionsBasic InstructionsBasic InstructionsBasic Instructions

2.1.2.1.2.1.2.1. Internet conInternet conInternet conInternet connectionnectionnectionnection

Start the WEB browser and enter the below URL to the address bar.

https://snk-komtrax.komatsu.co.jp/komtrax.KMTR.WEB/

(Enter all letters starting with https://...)

2.2.2.2.2.2.2.2. LoginLoginLoginLogin

By connecting to the address above, the scree as shown below shall be displayed.

Enter user ID and password, and press the "System Starts" button.

(Note that upper-and lowercase letters of user ID and password have to be distinguished.)

By checking the [Record User name and Environment.], entering the user ID and password

can be omitted from the next time.

Use [Language] and [Date format] as they are.

2.3.2.3.2.3.2.3. LogoutLogoutLogoutLogout

The logout screen shall appear by clicking the [Exit] link on the left of any screen. And you shall

be automatically logged out if you don't operate for 30 minutes.

(* You are not logged out automatically on some screens because of automatic screen

refreshment.)

Remarks:

The user ID and initial password shall

be written on a separate sheet. If you

have lost, contact the "Address for

inquiry" described in the section

above.

- 6 -

3.3.3.3. Explanation of Screen and OperationExplanation of Screen and OperationExplanation of Screen and OperationExplanation of Screen and Operation

3.1.3.1.3.1.3.1. Explanation of screenExplanation of screenExplanation of screenExplanation of screen

The typical KOMTRAX screen is divided into the following three areas.

①①①① Information Display area (bottom right of the screen)Information Display area (bottom right of the screen)Information Display area (bottom right of the screen)Information Display area (bottom right of the screen)

Information on various machine statuses shall display. Contents are different depending on

each screen. See explanation of each screen for details.

②②②② Search Criteria area (top right of the screen)Search Criteria area (top right of the screen)Search Criteria area (top right of the screen)Search Criteria area (top right of the screen)

When too much information is displayed in the Information Display area to find objective

information, it can be limited by using here. See "Retrieval of Information" for using this area.

(No Search Criteria area is provided on some screens.)

③③③③ Shortcut Menu aShortcut Menu aShortcut Menu aShortcut Menu area (left of the screen)rea (left of the screen)rea (left of the screen)rea (left of the screen)

Links to an objective screen are located.

Three categories of [Machine Overview], [Machine Monitoring] and [User Administration]

are provided in addition to [Exit].

[Machine Overview]: [Machine Overview]: [Machine Overview]: [Machine Overview]: function of displaying information of all belonging machines. Click

"Machine Library" for moving to the machine list screen.

[Machine Monitoring]: [Machine Monitoring]: [Machine Monitoring]: [Machine Monitoring]: function of displaying information of a particular machine. Enter

Machine Model and Serial Number (omissible) and click the link for the screen you

want to see.

[User Administration][User Administration][User Administration][User Administration]:::: Your password can be changed here.

[Exit][Exit][Exit][Exit]:::: to terminate KOMTRAX to move to the Logout screen.

③③③③③③③③SSSSSSSShhhhhhhhoooooooorrrrrrrrttttttttccccccccuuuuuuuutttttttt

MMMMMMMMeeeeeeeennnnnnnnuuuuuuuu aaaaaaaarrrrrrrreeeeeeeeaaaaaaaa

②②②②②②②② SSSSSSSSeeeeeeeeaaaaaaaarrrrrrrrcccccccchhhhhhhh CCCCCCCCrrrrrrrriiiiiiiitttttttteeeeeeeerrrrrrrriiiiiiiiaaaaaaaa aaaaaaaarrrrrrrreeeeeeeeaaaaaaaa

①①①①①①①①IIIIIIIInnnnnnnnffffffffoooooooorrrrrrrrmmmmmmmmaaaaaaaattttttttiiiiiiiioooooooonnnnnnnn DDDDDDDDiiiiiiiissssssssppppppppllllllllaaaaaaaayyyyyyyy aaaaaaaarrrrrrrreeeeeeeeaaaaaaaa

- 7 -

4.4.4.4. Definition of Time and Times on displayDefinition of Time and Times on displayDefinition of Time and Times on displayDefinition of Time and Times on display

■ Display of time or duration

Power-on Duration: hours during which the control power of the machine is turned ON.

Operation Time: hours during which the machine is operating

Production Duration: hours during which the machine is operating in the production mode.

Idle Time: hours during which the machine is not operating in the production mode.

Set-up Duration: hours during which power is turned ON but not for production (hours during

which the machine is either operating or stopping with power-on but not in the

production mode)

Summed Power-on Hours: total of power-on hours since KOMTRAX was installed

Summed Operation Hours: total of operation hours since KOMTRAX was installed

■ Display of Times

Operation Times

Number of Production Times: number of operation times with selecting the production mode

Summed Operation Times: total of operation times since KOMTRAX was installed

Summed Production Times: total of production times since KOMTRAX was installed

Type of machineType of machineType of machineType of machine DescriptionDescriptionDescriptionDescription PRESS MACHINE Number of stroking PRESS BRAKE Number of pressurizing TWISTER, LEASER PROCESSING MACHINE and FIBER LASER PROCESSING MACHINE

Number of piercing

GATLING PRESS CENTER Number of punching

- 8 -

5.5.5.5. Current ProductionCurrent ProductionCurrent ProductionCurrent Production

Operation statuses and abnormalities of all the machines in the plant are integrated and

displayed. The display can work as an operation bulletin to grasp current status of the machines

in the plant (as below).

■■■■Description of displayed informationDescription of displayed informationDescription of displayed informationDescription of displayed information

Inspection: Information only of the machine(s) checked here is displayed.

<How to use>

① Click to check the box on the left column of the list.

② Click to check the box for "Display machines with check only" in the Search

Criteria area.

③ Press the "Search" button.

* Abnormal: Indication turns ON if an abnormality arises with the machine.

Alarm: red indication; Caution: yellow indication

Maintenance: Indication turns on if parts replacement is required with the machine.

Replace now: red indication; Replace soon: yellow indication

Installation Site: Enter location of the machine. (Any description to your convenience is

allowed.)

Machine Name: machine number, line name etc. (any description to your convenience)

* Order No.: Upgrading your production machine is required to display.

* Product Identification No. Name: Upgrading your production machine is required to display.

* Operator: Upgrading your production machine is required to display.

Running Status: Blue bands are displayed with production hours.

Running Rate: percentage of "production hours" out of power-on hours

Production Duration: hours when the machine produces

* Real-time display: Screens are updated every 5 minutes.

- 9 -

Production Count

Type of machineType of machineType of machineType of machine DescriptionDescriptionDescriptionDescription PRESS MACHINE Number of stroking PRESS BRAKE Number of pressurizing TWISTER LEASER PROCESSING MACHINE FIBER LASER PROCESSING MACHINE

Number of piercing ON


* With selecting the production mode

Power-on Duration: Hours during which the control power of the machine is turned ON.

Software Version: Software version of KOMTRAX terminal shall be displayed.

Country: Country where the machine is operating shall be displayed.

- 10 -

6.6.6.6. Production HistoryProduction HistoryProduction HistoryProduction History

The history of the operation bulletin can be displayed by selecting the date (as shown below).

■ Description of displayed informDescription of displayed informDescription of displayed informDescription of displayed informationationationation

Inspection: Information only of the machine(s) checked here is displayed.

<How to use>

① Put a check by clicking the check box on the left column of the list.

② Check the box for "Display machines with check only" in the Search Criteria

area.


Installation Site: Enter location of the machine. (any description to your convenience)

Machine Name: Serial number, line name etc. (any description to your convenience)

Running Status: Blue bands are displayed with production hours.

Running Rate: percentage of "production hours" out of power-on hours

Production Duration: hours when the machine produces

Production Count:

* with selecting the production mode

Power-on Duration: hours during which the control power of the machine is turned ON

Software Version: Software version of KOMTRAX terminal shall be displayed.

Country: Country where the machine is operating shall be displayed.

Type of machineType of machineType of machineType of machine DescriptionDescriptionDescriptionDescription PRESS MACHINE Number of stroking PRESS BRAKE Number of pressurizing TWISTER LEASER PROCESSING MACHINE FIBER LASER PROCESSING MACHINE

Number of piercing ON


- 11 -

7.7.7.7. Machine LibraryMachine LibraryMachine LibraryMachine Library The list of your machines that comply with the KOMTRAX is displayed (as shown below).

Check: Information only of the machine(s) checked here is displayed.

Check: Information only of the machine(s) checked here is displayed.

<How to use>

① Put a check by clicking the check box on the left column of the list.

② Click to check the box for "Display machines with check only" in the Search

Criteria area.


* Abnormal: Indication turns on if an abnormality arises with the machine.

Alarm: red indication; Caution: yellow indication

Maintenance: Indication turns on if parts replacement is required with the machine.

Replace now: red indication; Replace soon: yellow indication

Machine Type: name of major grouping of the machine (press, laser etc.)

Machine Model; Model Type: brand and model of the machine

Serial Number: of the machine

Installation Site: location of the machine (any description to your convenience)

Machine Name: machine number, line name etc. (any description to your convenience)

Cumulative Production Duration: total of operation hours since KOMTRAX was installed

Cumulative Production Count: total of operation times since KOMTRAX was installed

Last Communication Time: last time when the machine communicated with the Server

Production Date: of the machine

Maker: name of the machine manufacturer

Country: country where the machine is located

* Real-time display: screen updated every 5 minutes

- 12 -

8.8.8.8. Machine Running StatusMachine Running StatusMachine Running StatusMachine Running Status

Operation status of a specified date for a specified machine can be seen (as shown below).

Since initial display information will be of the day, enter the date and time you want to check into

the "Appoint Period" columns.

■■■■ Description of displayed informationDescription of displayed informationDescription of displayed informationDescription of displayed information

Graph ①: Band graph

Power-on: Green bands show the duration of power-on time.

Production: Blue bands show the duration of production time. (Status that machine is

operating with control power ON and production mode ON)

Abnormal: Red bands show duration of abnormal time.

Graph ②: bar graph and line graph

SPM (strokes/min) (blue column graph): production times per one minute; average of

production counts for 6 minutes

Production Count for the Day (red line graph): total production times of the day

Numerical value ①: percentage of each hours out of power-on hours

Numerical value ②: operation rate and total production count

Running Rate of the Day: percentage of "production hours" out of power-on hours

Production Count for the Day: total production times during appointed period

GGGGGGGGrrrrrrrraaaaaaaapppppppphhhhhhhh ①①①①①①①①

GGGGGGGGrrrrrrrraaaaaaaapppppppphhhhhhhh ②②②②②②②②

NNNNNNNNuuuuuuuummmmmmmmeeeeeeeerrrrrrrriiiiiiiiccccccccaaaaaaaallllllll vvvvvvvvaaaaaaaalllllllluuuuuuuueeeeeeee ①①①①①①①①

NNNNNNNNuuuuuuuummmmmmmmeeeeeeeerrrrrrrriiiiiiiiccccccccaaaaaaaallllllll vvvvvvvvaaaaaaaalllllllluuuuuuuueeeeeeee ②②②②②②②②

- 13 -

9.9.9.9. Specified Period Running StatusSpecified Period Running StatusSpecified Period Running StatusSpecified Period Running Status Operation status in a specified period is displayed in the unit of day. You can know production

status of every day.

■■■■ Description of displayed informationDescription of displayed informationDescription of displayed informationDescription of displayed information

① Period Appointment: Appoint collection period and display time.

② Number of Days of Period: Number of days in the collection period is displayed.

③ Number of Days of Operation: Number of days when the power (to the KOMTRAX) was

turned ON in the collection period is displayed.

④ Production Duration; ⑤ Production Count; ⑥ Power-on Duration

Average calculation: Total value during the operation days is divided by the operation

days.

Total calculation: Total hours or times during the operation days are displayed.

⑦ Date: of the collected days. Days of no power-on are not displayed.

⑧ Running Status: Operation status of each day is displayed in one minute unit. Minutes

when the machine is running are displayed in blue. Abnormal minutes are in red.

⑨ Running Rate: against specified hours of the day

⑩ Production Duration; ⑪ Production Times; ⑫Power-on Duration: Totals of specified

hours and production times during the collected days

⑨⑨⑨⑨⑨⑨⑨⑨ ⑩⑩⑩⑩⑩⑩⑩⑩

⑫⑫⑫⑫⑫⑫⑫⑫

①①①①①①①①CCCCCCCCoooooooolllllllllllllllleeeeeeeeccccccccttttttttiiiiiiiioooooooonnnnnnnn ppppppppeeeeeeeerrrrrrrriiiiiiiioooooooodddddddd aaaaaaaannnnnnnndddddddd ddddddddiiiiiiiissssssssppppppppllllllllaaaaaaaayyyyyyyy ttttttttiiiiiiiimmmmmmmmeeeeeeee

⑪⑪⑪⑪⑪⑪⑪⑪

②②②②②②②② ③③③③③③③③ ④④④④④④④④ ⑤⑤⑤⑤⑤⑤⑤⑤ ⑥⑥⑥⑥⑥⑥⑥⑥

⑦⑦⑦⑦⑦⑦⑦⑦ ⑧⑧⑧⑧⑧⑧⑧⑧

- 14 -

10.10.10.10. Daily Report Daily Report Daily Report Daily Report 1 1 1 1 ((((report report report report outputoutputoutputoutput: : : : partpartpartpart number controlnumber controlnumber controlnumber control, , , , list typelist typelist typelist type))))

Operation status of the appointed machine is output in a report form. A feature is that

memorandums on the job can be input directly from the PC. The output can be stored as a PDF

file, or be printed out (A4 size is recommended).

■ Description of displayed informationDescription of displayed informationDescription of displayed informationDescription of displayed information

① Period Appointment: Enter dates for output.

② Time Appointment: Enter start time and end time for the graph output. (It will be

convenient to enter start time and end time of your working hour.)

③ Update: of the screen

④ Company Name, Department and Name: Enter person in charge for the report. (Omissible)

⑤ Operation Contents: Enter comments per every one hour. (Omissible)

⑥ Remarks: are displayed in the comment column on the bottom of the report. (Omissible)

⑦ PDF Output: Click for displaying the PDF output screen.

⑧ Data Updating: Click for updating the operation data.

* Previous contents for ② Time Appointment and ④ Company Name, Department and Name

are displayed as initial values next time.

②②②②②②②②④④④④④④④④

①①①①①①①①

⑤⑤⑤⑤⑤⑤⑤⑤

③③③③③③③③

⑥⑥⑥⑥⑥⑥⑥⑥

⑦⑦⑦⑦⑦⑦⑦⑦ ⑧⑧⑧⑧⑧⑧⑧⑧

- 15 -

11.11.11.11. Daily ReportDaily ReportDaily ReportDaily Report 2 2 2 2 (report output: part number control, band graph type)(report output: part number control, band graph type)(report output: part number control, band graph type)(report output: part number control, band graph type)

Operation status of the appointed machine is output as a report form. The output can be stored as

a PDF file, or be printed out (A4 size is recommended).


① Period Appointment: Enter dates for output.

② Time Appointment: Enter start time and end time for the graph output. (It will be

convenient to enter start time and end time for the work.)

③ Update: of the screen

④ Company Name, Department and Name: Enter person in charge for the report. (Omissible)

⑤ Bar graph for number of production times: production times per one minute; average of for

6 minutes

⑥ Line graph for total production count: cumulative production count for the day

⑦ Operation rate of the day: percentage of "production hours" out of power-on hours

⑧ Sum of operation count of the day: aggregate production count during appointed period

⑨ Band graph of operation: Power-on hours, production hours and abnormal time are

displayed.

⑩ Remarks: are displayed in the comment column on the bottom of the report. (Omissible)

⑪ PDF Output: Click for displaying the PDF output screen.

⑫ Date Updating: Click for updating the operation data.

* Previous contents for ② Time Appointment and ④ Company Name, Department and Name

are displayed as initial values next time.

②②②②②②②②①①①①①①①①

⑤⑤⑤⑤⑤⑤⑤⑤

③③③③③③③③

⑨⑨⑨⑨⑨⑨⑨⑨

⑩⑩⑩⑩⑩⑩⑩⑩

⑪⑪⑪⑪⑪⑪⑪⑪ ⑫⑫⑫⑫⑫⑫⑫⑫

⑥⑥⑥⑥⑥⑥⑥⑥ ⑦⑦⑦⑦⑦⑦⑦⑦

⑧⑧⑧⑧⑧⑧⑧⑧

④④④④④④④④

- 16 -

12.12.12.12. Maintenance Inspection InformationMaintenance Inspection InformationMaintenance Inspection InformationMaintenance Inspection Information

This is the screen for maintenance (inspection and replacement) of your machines. You can

control the next maintenance on hours and times considering the previous date.

Press the corresponding "reset" button after maintenance.


① Maintenance Items: check points on the machine

② Specify Interval: recommended maintenance intervals

③ Current Value: elapsed hours till now

④ Last Maintenance Date: previous date of pressing the reset button

⑤ Remaining Interval: hours or times before the next maintenance

⑥ Reset: Press this button after maintenance.

⑦ History: for displaying resetting history

①①①①①①①① ②②②②②②②② ③③③③③③③③ ④④④④④④④④ ⑤⑤⑤⑤⑤⑤⑤⑤ ⑦⑦⑦⑦⑦⑦⑦⑦⑥⑥⑥⑥⑥⑥⑥⑥

⑩⑩⑩⑩⑩⑩⑩⑩

⑧⑧⑧⑧⑧⑧⑧⑧

⑨⑨⑨⑨⑨⑨⑨⑨

- 17 -

⑧ Reset Time: Enter the date of maintenance. The maintenance information is processed

based on this date.

⑨ User Original Maintenance Item: Items you want to check and control can be added and

changed. You can handle them the same as other maintenance items.

⑩ Machine and Company Information: Location, Company, Person in charge, Telephone

Number, Fax Number and E-mail for the machine are displayed. The location is

linked with the Google map.

Note) Figures in items ②, ③ and ⑤ above with the unit "H" are "residual intervals in hours

and with "times" are "residual intervals in times."

Note) See the maintenance manual of individual machine for concrete maintenance

contents for each item.

- 18 -

13.13.13.13. Event HistoryEvent HistoryEvent HistoryEvent History

Occurred and occurring alarms, warnings and interruptions are displayed.

By appointing the collection period and pressing the "Update" button, the alarms and errors in

the period are displayed as a list.


① Code: See each machine manual for concrete contents.

② Sort: "Warning " or "Alarm" is displayed.

③ Text: The message made with the alarm or error is displayed.

④ Time of Occurrence: The date and time when the error occurred are displayed.

⑤Times of Occurrence during the Period: Number of the same errors occurred in the

collection period is displayed.

⑥ Machine and Company Information: Location, Company, Person in charge, Telephone

Number, Fax Number and E-mail for the machine are displayed. (These items are

registered on the "Modify Machine Information" screen.) The location is linked with

the Google map.

Note)

Obtaining and displaying the Error Code are not possible with some machines.

①①①①①①①① ②②②②②②②② ③③③③③③③③ ④④④④④④④④ ⑤⑤⑤⑤⑤⑤⑤⑤

⑥⑥⑥⑥⑥⑥⑥⑥

- 19 -

14.14.14.14. Modify Machine InformationModify Machine InformationModify Machine InformationModify Machine Information

The name and information of the machine can be set. Use here for your convenience.

■ Modify Machine Information

Enter information and press the "Modify" button.

① Installation Site: Enter location and section of the machine. (Plant name, line name,

section name etc.)

② Machine Name: Enter a common name of the equipment. (Line number, product name etc.)

③ Representative: Enter person in charge for the machine.

④ Telephone Number: of the person in charge

⑤ Fax Number: of the person in charge

⑥ Email: of the person in charge

■ Modify Period/Times of Replacement Date (offset setting)

Replacing intervals of the maintenance parts can be modified. Use here for your convenience.

Enter offset values and press the "Modify" button.

①①①①①①①①②②②②②②②②③③③③③③③③④④④④④④④④⑤⑤⑤⑤⑤⑤⑤⑤⑥⑥⑥⑥⑥⑥⑥⑥

- 20 -

15.15.15.15. Other FunctionsOther FunctionsOther FunctionsOther Functions

15.1.15.1.15.1.15.1. Search CriteriaSearch CriteriaSearch CriteriaSearch Criteria

Information to display can be limited by entering letters to narrow down into the "Search

Criteria" columns and pressing the "Search" button. Only the information to comply with the

entered letters is displayed.

Search Criteria

・Machine Sort and Maker: Select from the pull-down menu.

・Installation Site and Machine Name: Enter a key word in the text box. (partial-match

search)

・Machine Model, Model Type and Serial Number: Enter a key word in the text box.

(complete-match search)

* Wild card (*) search is also possible.

15.2.15.2.15.2.15.2. SortSortSortSort

By clicking the item description, the list is sorted in ascending order with the column of the

item. The list order changes in the order of (ascending → descending → no sorting →

ascending) on each clicking.

15.3.15.3.15.3.15.3. CSV DownloadCSV DownloadCSV DownloadCSV Download

On the screen where [CSV Download] button is provided, the equivalent data with the

displayed data can be downloaded as a CSV text file. Since the dialog box for saving the file shall

be displayed by pressing the [CSV Download] button, save it at your appropriate location.

The saved file can be used with miscellaneous spreadsheet and database programs. (See the

manual of the software for using the file.)

- 21 -

15.4.15.4.15.4.15.4. Modify user Modify user Modify user Modify user informationinformationinformationinformation

Your contact address and daily report in one-screen display can be changed.

If your telephone and fax numbers are changed, please modify them since we use them for

communications with you.

15.5.15.5.15.5.15.5. Change PasswordChange PasswordChange PasswordChange Password

You can change your password.

① Current Password: Input your password before modification.

② New Password: Enter your new password.

③ Confirm Password: Enter the same New Password again.

The password has to be in 6 through 20 characters. Note that upper-and lowercase letters are

distinguished. Changing your password periodically is recommended.

②②②②②②②②①①①①①①①①

③③③③③③③③

- 22 -

16.16.16.16. OperatorOperatorOperatorOperator AdministrationAdministrationAdministrationAdministration

This is the setting screen for combining the "operator code" on the machine with the name

displayed on the WEB. The name is displayed as the operator name on the daily reports.

Note)

Registration and modification are possible, but deletion is not possible.

- 23 -

17.17.17.17. Contents Added with Upgraded Contents Added with Upgraded Contents Added with Upgraded Contents Added with Upgraded Software Software Software Software Version for MachineVersion for MachineVersion for MachineVersion for Machine

17.1.17.1.17.1.17.1. Current ProductionCurrent ProductionCurrent ProductionCurrent Production

Data ①: Order No., Part No. and Operator have been added.

* Order No.: Currently producing Order No. with the machine is displayed.

* Product Identification No. and Name: Currently producing Part No. with the machine is

displayed.

* Operator: Currently working operator with the machine is displayed.

Graph ①: Running statuses are expressed in different colors.

Running Rate: Percentages of "Production” hours, "Idle” hours and "Set-up” hours out of

“Power-on” hours are graphically displayed.

Production hours: blue; Idle hours: yellow; Set-up hours: orange

* Real-time display: * Real-time display: screen updated every 5 minutes

GGGGGGGGrrrrrrrraaaaaaaapppppppphhhhhhhh ①①①①①①①① DDDDDDDDaaaaaaaattttttttaaaaaaaa ①①①①①①①①


- 24 -

17.2.17.2.17.2.17.2. Machine Running StatusMachine Running StatusMachine Running StatusMachine Running Status

Table ①: Production control table per each part number has been added.

It will support your production control by contrasting the production plans with the

production results.

・PRESS MACHINE and PRESS BRAKE


TTTTTTTTaaaaaaaabbbbbbbblllllllleeeeeeee ①①①①①①①①

TTTTTTTTaaaaaaaabbbbbbbblllllllleeeeeeee ②②②②②②②②


New feature

- 25 -

・TWISTER, GATLING PRESS CENTER and LEASER PROCESSING MACHINE

・FIBER LASER PROCESSING MACHINE

Table ②: Consumables control table has been added.

・TWISTER

By displaying the utilization rates on replacing, wrong usage can be avoided. And such

machine troubles as an abnormal torch can be judged.

Graph ①: Band graph for idle and set-up hours has been added.

By adding the idle hours and set-up hours, more details of production status can be seen.

Idle: Idle hours are displayed in yellow. (Status that machine is not producing with control

power ON and production mode ON)

Set-up: Set-up hours are displayed in orange. (Status that machine is operating with control

power ON and production mode OFF)

Graph ②: Graph for periodical monitoring has been added.


Visualizing gas and power consumption helps save running costs.

New feature

New feature

- 26 -

17.3.17.3.17.3.17.3. Specified Period Running StatusSpecified Period Running StatusSpecified Period Running StatusSpecified Period Running Status

Numerical value ①: Average/total values for idle time and set-up duration have been added.

Average calculation: Total value during the operation days is divided by the operation days.

Total calculation: Total hours or times during the operation days are displayed.

Graph ①: Running statuses are expressed in different colors.

Running Rate: Percentages of "Production" hours, "Idle" hours and "Set-up" hours out of

"Power-on" hours are graphically displayed.

Production hours: blue; Idle hours: yellow; Set-up hours: orange

NNNNNNNNuuuuuuuummmmmmmmeeeeeeeerrrrrrrriiiiiiiiccccccccaaaaaaaallllllll vvvvvvvvaaaaaaaalllllllluuuuuuuueeeeeeee ①①①①①①①①


- 27 -

17.4.17.4.17.4.17.4. Daily Report 1 (report output: part Daily Report 1 (report output: part Daily Report 1 (report output: part Daily Report 1 (report output: part number controlnumber controlnumber controlnumber control,,,, list type)list type)list type)list type)


By adding the idle hours and set-up hours, more details of production status can be seen.



Set-up: Set-up time is displayed in orange. (Status that machine is operating with control


Graph ②: Gas consumption has been added to the graph for periodical monitoring.


Visualizing gas consumption helps save running costs.


TTTTTTTTaaaaaaaabbbbbbbblllllllleeeeeeee ①①①①①①①①

TTTTTTTTaaaaaaaabbbbbbbblllllllleeeeeeee ②②②②②②②②


GGGGGGGGrrrrrrrraaaaaaaapppppppphhhhhhhh ③③③③③③③③

New feature

- 28 -

Graph ③: Power consumption has been added to the graph for periodical monitoring.


Visualizing power consumption helps save running costs.

Table ①: Production control table per each part number has been added.

It will support you with your production control: You can check the machine, person, part

number, times and hours of production. And you can contrast the production plans and the

production results.

Table ②: Consumables control table has been added.

・TWISTER

By displaying the utilization rates on replacing, wrong usage can be avoided. And such

machine troubles as an abnormal torch can be judged.

See [17.2. Machine Running Status] section for details.

- 29 -

17.5.17.5.17.5.17.5. Daily Report 2 (report output: part number control, band graph type)Daily Report 2 (report output: part number control, band graph type)Daily Report 2 (report output: part number control, band graph type)Daily Report 2 (report output: part number control, band graph type)


By adding the idle hours and set-up hours, more details of production status can be described

on the daily report.



Set-up: Set-up time is displayed in orange. (Status that machine is operating with control


Graph ②: Gas consumption has been added to the graph for periodical monitoring.


Making gas consumption visualize can help save running costs.

Graph ③: Power consumption has been added to the graph for periodical monitoring.



GGGGGGGGrrrrrrrraaaaaaaapppppppphhhhhhhh ④④④④④④④④

GGGGGGGGrrrrrrrraaaaaaaapppppppphhhhhhhh ③③③③③③③③

New feature

- 30 -


Visualizing power consumption helps save running costs.

Graph ④: Band graph of production control per each part number has been added.

Since production hours for each part number are displayed with the band graph, you can see

the machine, person, part number, times and hours at a glance.

Instruction Manual - KOMATSU · PDF file- 1 - KOMTRAX Instruction Manual (For North America...

Documents

Transcript of Instruction Manual - KOMATSU · PDF file- 1 - KOMTRAX Instruction Manual (For North America...