Instruction Manual

Safety notes 3Risk of Electric Shock 3Risk of Blade injury 3Risk of Projection of High-temp Food 4Avoid scalding by out-flowing vapor or condensed water bubble 4Risk of scalding by hot spare parts 4Risk of injury by splashed food 4Risk of using foreign ingredients or unwarrantable parts 4Possible shift of Thermo Chef Natura 4Damage of hot vapor 4Risk of Other hot resources 4 The Overflow of Food 4

Damage of Bad Ventilation 4

Technical data 5

Brief introduction/ Customer service 6

Your Thermo Chef Natura 7

Accessories 9Blender Bowl 9Measuring Cup 9Basket filter 9Scraper Bar 10Butterfly Bar 11Steamer 11

Instructions before use 12Before you start 12How to insert the blender bowl correctly 13How to remove the blade base 13

CATALOGUE

Safety notes 3Risk of Electric Shock 3Risk of Blade injury 3Risk of Projection of High-temp Food 4Avoid scalding by out-flowing vapor or condensed water bubble 4Risk of scalding by hot spare parts 4Risk of injury by splashed food 4Risk of using foreign ingredients or unwarrantable parts 4Possible shift of Thermo Chef Natura 4Damage of hot vapor 4Risk of Other hot resources 4 The Overflow of Food 4

Damage of Bad Ventilation 4

Technical data 5

Brief introduction/ Customer service 6

Your Thermo Chef Natura 7

Accessories 9Blender Bowl 9Measuring Cup 9Basket filter 9Scraper Bar 10Butterfly Bar 11Steamer 11

Instructions before use 12Before you start 12How to insert the blender bowl correctly 13How to remove the blade base 13

Instruction for use 14Technical parameter 14Start to use 14Explanation of characters in the display 15Button instruction 15Operational instruction for functions 16

Things to remember 21Sleep mode 21Electronic motor protection 21First use and overload 21

Cleaning 22How to clean the blender bowl and the bowl lid 22How to clean blade base 22How to clean steamer 22How to clean the main body 23More information about cleaning 23

Notes for your own recipes 24

Trouble shooting 25

Handy suggestions 26

Measurement guide 27

Warranty 28

New Wave appliance range 29

After sales service 30

CATALOGUE

Thermo Chef Natura can be used in home (or similar places such as hotels or restaurants). Thermo Chef Natura is conforming with the most advanced SAA safety standard. For safety, please read the instruction of use carefully before use, especially the following aspects: Please keep the instruction manual for future reference. • This appliance is not intended for use by persons

(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Appliances are not intended to be operated by means of an external timer or separate remote control system.

• This appliance must not be immersed.• The blender is only to be used with the docking

unit CAUTION: Ensure that the blender is switched off before removing it from the docking unit.

• Switch off the appliance before changing accessories or approaching parts which move when in use.

• If the bowl is overfilled, boiling water may be ejected.

• Do not Immerse during cleaning. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such asa timer, or connected to a circuit that is regularly switched on and off by the utility.

Risk of Electric Shock• Please unplug the application when cleaning• Please do not immerse the main body in the

water or wash it with a great amount of water. To be cleaned with wet cloth and avoid water or other foreign matter getting into the main body.

• Regularly inspect the main body, steamer or other components for damage. The damaged parts will decrease the safety of use. When a faulty part is found, please stop use and contact New Wave Kitchen Appliances customer service department.

• Thermo Chef Natura can only be repaired by the persons appointed by our company. Any inappropriate or unauthorized repair will cause safety risk. The warranty will be void if components from other sources are used.

Risk of Blade injury• Do not touch the edge of the blades. Please

be careful and hold the top part when you reassembly or dismantle the blade.

• Risk of Projection of High-temp Food• The food should not exceed the maximum

capacity of 2.0L.• Pay attention to the capacity mark on the

blender bowl.• Do not open the lid until the food in the bowl

stops rotating, especially during speed 4 or even higher speed.

• Please do not force the lid to open.• When the food in the bowl is of a high-

temperature or boiling, do not use speed 4 or greater.

• Pay attention to high-temperature food when opening bowl lid. Please put measuring cup at the mouth of bowl lid correctly when processing food such as sauce or soup at medium speed (3-6) and high speed (7-10).

• Do not touch the blender bowl when processing hot food of more than 60°C.

• Adopt low speed (1-2) when using steamer in order to avoid the liquid projected out at high speed.

• Please put the food processor on a clean, stable, flat and cool table especially when using steamer.

• Make sure that steamer and blender bowl are connected well when using steamer.

SAFETY NOTES !

3

4

Avoid scalding by outflowed vapor or condensed water bubble• Be aware vapour will outflow through the top

cover or sides.• In operation, remember to not touch any part

of the steamer except the handles.• Do not use the steamer without the cover in

place.• When opening the steamer cover, be careful

not to be scalded by vapour.• When using steaming and boiling setting,

pay attention that vapour will outflow through blender bowl mouth.

• When using the steamer, please keep children away from the appliance.

• Keep checking that the air hole on the cover is unblocked.

Risk of scalding by hot spare parts• Ensure the appliance is put out of children’s

reach and warn children that the unit will become hot and do not touch it.

Risk of injury by splashed food• When using Thermo Chef Natura to grind or

chop frozen food at medium speed (3-6), high speed (7-10) or turbo, press the blender bowl firmly.

Risk of using foreign ingredients or unwarrantable parts• Thermo Chef Natura spare parts provided by

New Wave• Kitchen Appliances can be used for this

appliance.• Do not use components not provided by New

Wave Kitchen Appliances. • The measuring cup is the only part which can

be used to cover the round hole in the top cover. Please do not use cloth or similar things to cover the hole.

• Only the scraper bar with the safe round plate can be used for this unit. Please do not use other articles such

as a soup spoon or spatula for blending, or else they will bump with the blender blade components which will cause danger.

Asset damage• Possible shift of Thermo Chef Natura• Place the unit on a stable, flat table which will not

become hot and ensure it is a safe distance from the edge to avoid falling down. When it is used to knead the dough or cut food, the unit may move due to vibration.

Avoid damage• Damage of hot vapor: when using the steamer,

pay attention that there is appropriate distance between the appliance and cupboard or book shelf to avoid vapour damage.

• Risk of other hot resources: Please keep the appliance away from other electrical appliances and Induction cooker. Please do not put the set or the supply cord which is already connected with electricity on any hot resources such as electric hot plate, stove or oven.

• The leakage of food: Make sure that the rubber lock ring is placed well when setting up blade base. Failure of installation of rubber lock ring will cause food leakage which may damage the appliance.

• Damage of bad ventilation: Ensure that the vent on both sides of the main body are not blocked by food, this will cause the appliance to malfunction. CAUTION: This unit should be used with a residual current device (safety switch) to lessen the risk of scalding or other injury from hot water that may be ejected if the heating element ruptures. Disregard this marking if your home is fitted with a residual current device (safety switch). CAUTION: Do not operate the unit on an inclined plane. Do not operate the unit unless it’s well filled. Do not move while the unit is switched on.

SAFETY NOTES !

Motor

Heating device

Electronic Scale

Housing

Steamer

Motor power : 550WRotation range: 110 to 8700 rounds per minute

Power consumption: 1000w, over heat protection device.

Range of weighting: 0g to 3000g. resolution rate: 4g

Rated power

dimension and weight � not include steaming pot�

Steaming pot

Material: stainless steel, maxi capacity: 2L, with heating system and temperature sensor

maxi blending power� 550Wmaxi heating power� 1000Wlength of supply cord: 1.2m

Height: 30cmWidth: 28.5cmWeight: 6.3kg

Height: 11.8cmWidth: 38.5cmDepth: 27.5cmWeight: 0.8kg

Customer ServiceIf you experience problems or difficulty, please contact New Wave Kitchen Appliances.

Tel: 03 9553 7211Fax: 03 9553 7233E-mail: info@newwaveka.com.au

TECHNICAL DATA

5

220-240Vac, 50/60Hz

When opening the packing box, take out all the accessories and get to know them according to the components list.

The spare parts are as follows: 1. Main body 2. Steamer cover 3. Steaming mesh 4. Steamer 5. Steaming pot 6. Measuring cup 7. Cup lid 8. Butterfly bar 9. Blade base components10. Blender bowl11. Filter basket12. Scraper13. Scraper bracket14. Scraper handle15. Scraper bar

1

6

7

2

3

4

5

YOUR THERMO CHEF

6

9

10

12

13

14

15

11

YOUR THERMO CHEF

7

Before you start to use Thermo Chef Natura, we would like to introduce the accessories to you in detail:

Blender bowl:There are bowl capacity graduations on one side of the bowl (see picture 1). Each graduation represents 0.5L. The maximum capacity of the bowl is 2.0L.

Measuring cup:The measuring cup can be used in many ways: it can be used as a cover (see picture 2) to prevent the steam from escaping or the food to be mixed or cooked splashing out. At the same time, it can also be used to measure the ingredient. A full measuring cup is 100ml.If you want to add ingredients through the mouth, lift the measuring cup and put ingredients into the bowl

Basket filter:The basket filter of Thermo Chef Natura is made of high qualified stainless steel. Just like the measuring cup, the basket filter is also a multifunctional component:• Filter fruit and vegetable juice. After grinding or

making fruit sauce with Thermo Chef Natura, put the basket filter into the blender bowl to help pour out the juice. Please use the scraper bar to hold the basket filter when pouring the juice. Now the basket filter is used as a sieve.

!Food projection ( Scalding Danger�The quantity of food put into the bowl should not exceed 2.0L, or else the food may overflow or splash out causing danger..

!Food projection � Scalding Danger��� The measuring cup is the only part which can be used to cover the round hole in the top cover. � Please do not use cloth or similar things to cover the hole, or else the food may splash out and cause danger to people.

ACCESSORIES

2

3

1

0.5L

1.0L

1.2L

2.0L

Max capacity

8

NOTICE

NOTICE

• Soft food such as meat or fish balls should be put in the basket filter to stew. Easy to dismantle the basket filter: put the scraper shaft into the notch and press the scraper to the direction of the edge to finish the assembly. Then turn the scraper to the center of the basket filter and it will be easily taken out.

• If you wish to decrease the water in the food, such as tomatoes, then take the measuring cup away and cover with the basket filter instead. The water can be easily removed.

Scraper bar:Scraper bar is another function designed for the Thermo Chef Natura.• The scraper is the only utensil which can be used

to mix or blend in the bowl. The scraper can be put into the bowl through the hole in the cup cover ( see picture 6) and the round safe plate can prevent it from touching the blades. So the scraper can be used during the process of cooking, filtering and blending.

• The scraper bar can also be used to scrape the food in the bowl, and the shape of it just fits into the gap between blade and the bowl wall.

• The scraper bar is designed not to touch the top of the blade.

• Use the basket filter when filtering fruit juice or vegetable juice.

• It is easy to take out the basket filter with the help of the scraper shaft.

!Incidents may arise if anything except the scraper shaft is used for blending.� Please use the scraper shaft attached to blend food.� Do cover and lock the lid before putting in the scraper shaft.� Please do not use soup spoon or other spoons for blending which will touch the rotating blades and cause injury.

4 Pressing direction

5

6

ACCESSORIES

9

NOTICE

ACCESSORIES

Butterfly bar:• Installed on the blade, the butterfly bar can help to

mix fresh milk or egg white. It is also the best utensil to make milk pudding or milk mixture.

• When boiling milk or making pudding or fruit puree, the butterfly bar can prevent the food from binding together and keep the food mixing.

• Have the two sides of the butterfly bar at the same direction as the blades, then centralize the centre hole of the butterfly bar with the screw hole of the blender blade and press it with enough force for good connection. Turn the butterfly bar counter clockwise to make it locked on the blade.

Steamer:[Accessories List] there are three parts of the steaming pot:• steamer cover (top)• steaming mesh (middle)• steamer (bottom)All the parts are made of high qualified materials.

! Do not start the appliance until the butterfly is fixed

in place. Do not use speed 4 when using butterfly bar. Do not use scraper bar when using butterfly bar. Do not add ingredients into the bowl when the

appliance is working with the butterfly bar, or else the butterfly may be damaged or blocked.

�

���

Please make sure that the steamer lid is covered when putting the steaming pot on. (see picture 8)

The steaming pot of Thermo Chef Natura cannot be used in a microwave oven or other electric appliances.

Only “Cooking” function can be chosen when this accessory is to be used.

!

7

8

9

10

�

�

�

NOTICE

NOTICE

ACCESSORIES

Combination of the steamer:There are two combinations:There is no need to use the cup lid if steamer is used. Install the steamer onto the blender cup according to the way of assembling cup lid.Combination 1Steamer + steaming mesh + steamer lid (Picture 9). This is the best combination way for cooking various food. For example: Vegetables and meat or fish and buns.Combination 2Steamer + steamer lid (picture 10).This is the best combination way to cook large amounts of the same food. For example: vegetables, potatoes or large pieces of meat or sausage.

!

Important notice

10

If the lid isn’t covered well, the vapour may come out which will cause the failure of the cooking process.

11

NOTICE

INSTRUCTIONS BEFORE USE

Before you startAt the early stage of using this unit, there will be a light peculiar smell produced by the motor which is normal. After a period of time, this smell will disappear.• Please put the unit on a clean, stable and flat table.• It is best to put the unit on a fixed place for your

convenience.• Please thoroughly clean the unit according to the

cleaning instructions in the manual before using it.

How to insert the blender bowl correctly?Before using, please put the main body and blender bowl on a flat table. Add appropriate quantities of food and ingredients into the bowl and place the cup cover on the bowl (picture 1).Turn the cup cover clockwise to the place as shown in picture 3. With the handle facing the front (the direction of buttons), put the bowl onto the main body until you hear a sound to show they have been connected well as shown in picture 5, or else the unit cannot be started.

How to remove the blade base?Dismantle the blade base: hold the half top of the blade base from inside with the left hand (it is better to wrap up the blade with cloth or towel to avoid injury), turn the fixing bracket counter clockwise 30°(see picture 6) with the other hand. Take out the blade base out as shown in picture 7.

Risk of scalding by splashed foodDo not open the bowl cover. First take apart the blender bowl from the main body in the reverse procedures and then open the bowl cover.

!

12

NOTICE

INSTRUCTIONS BEFORE USE

Reassemble blade base: The assembly procedure of blade base is just opposite to “dismantling blade base”.

Be careful not to be hurtThe blade is very sharp. Please wrap the blade with Washcloth when dismantling or assembling the blade base.

!

!

7

13

NOTICE

NOTICE

INSTRUCTION FOR USE

Before using the Thermo Chef, please put the appliance safely on the table. Do not put it too close to the edge, and keep it away from the built-in wardrobe or hanging bracket.

Technical parameter 1. Voltage input 220-240V AC 50/60Hz2. Rated power: Motor power 550W Heating plate

1000W3. Work voltage of control panel 5V: 12VDC4. Technical parameter of main electric machine:5. Work voltage 220-240V AC 50/60Hz Max rotate

speed 8700 RPM Min6. Display way LCD display + white backlight7. Heating way Heating by heating tube at the bowl8. bottom, Power 1000W9. Electronic scale max weight 3Kg; resolution

rate:4g10. Environment temperature 0-x50℃

Start to use Put the machine on the table horizontally, or else the machine will not work stably or the electronic scale cannot weigh accurately. Take out the supply cord and connect one terminal to the main body and the other terminal to the outlet. Now let’s learn how to operate the appliance together.Press the switch at the back of the main body to start the unit.

Explanation of characters in the display

Display “ ” meaning: heating function Flicker: adjustable temperature mode

Display “ ” meaning: blending Flicker: rotation speed gear can be set.Not flicker: rotation speed gear is locked.

Display “ ” meaning: picture of electronic scale Display “ ”meaning: picture of cooking Flicker: cooking setting mode Display “ ”meaning: picture of knead doughFlicker: knead dough setting mode Display “ ”meaning: Turbo boost function Display “ ” meaning: timingFlicker: timing setting mode Display “ ”meaning: cover is locked. Display “ ”meaning: cover is unclocked. Display “ ”meaning: temperatureFlicker: heatingNot flicker: keep warming Display “ ”meaning: time: or weight: display Flicker: time setting modeNot flicker: Temperature is unchangeable.

Display “ ”meaning: pause functionThe unit will switch to pause mode and stop.

14

 

INSTRUCTION FOR USE

In scale mode, it shows the weight on the scale plate with “g” as the unit. But if the user set the time, in working mode, the left time will be countdown in the screen in the form of “XX: XX”. If the time is not set up, then the working time cost will be accumulated in the screen in the form of “XX:XX”.

Button instruction “Beep” sound shows the button has activated.The control panel includes the following buttons including:“electronic scale”, “speed adjustment”, “knead dough”,“Turbo boost”, “temperature adjustment”, “cooking”, “Timer”, “+”, “-”, “start”, “stop”. The functions of these buttons will be explained in the following part.

1. button of electronic scale/zero clearing of measuring“ ” • In standby condition, if you press this button,

“ ”will be shown in LCD screen. Now the appliance is in electronic scale mode.

• In electronic scale mode, if you press this button again, then the weight displayed in LCD will be cleared to zero.

• Electronic scale function is not allowed to be used during the working process.

2. Button for blending/ locking speed/ unlocking speed “ ” • In standby condition, if you press this button, then

the appliance come into blending mode.• In blending mode, Press this button when “ ” is

flickering in LCD, then the speed is locked.• In blending mode, Press this button when “ ”

stops flickering in LCD, then the speed is unlocked.3. Button for kneading dough “ ”• In standby condition, if press this button, “ ” will

flicker in LCD screen, now the appliance gets into

• kneading dough function.4. Turbo boost button“ ”• Press in and maintain the pressure, “ ” will

flicker in LCD screen, now the appliance is in Turbo boost mode and rotates and blends at maxi speed.

• When you stop pressing it, the appliance will stop blending.

5. Button for heating/ locking temperature regulation/ unlocking temperature regulation “ ”• Press this button in stand-by mode, the appliance

gets into heating setting mode.• In heating mode, press this button when “ ” is

flickering, then temperature regulation is locked.• In heating mode, press this button when “ ”

is not flickering, then temperature regulation is unlocked.

6. Cooking “ ”• In standby condition, if you press this button, “ ”

it will flicker in LCD screen, now the appliance gets into cooking mode.

7. Timer “ ”• This button in standby mode, “ ” will flicker

in LCD screen, now the appliance gets into timer mode.

• This button in timer mode, hour setting will be changed to minute setting.

• Confirm the setting time.8. Increase speed/temperature/ time “ ”• In blending mode, the rotation speed will increase

one level each time you press the button.• In heating mode, the heating temperature will

increase one level each time when you press the button.

• In timer mode, time will increase by pressing the button.

• If maintain the pressure, the time will increase quickly.

9. Decrease speed/temperature/ time “ ”• In blending mode, the rotation speed will decrease

one level each time when you press the button.• In heating mode, the heating temperature will

decrease one level each time when you press the button.

• In timer mode, time will decrease by pressing the button. If maintain the pressure, the time will decrease quickly.

15

INSTRUCTION FOR USE

10. start “ ”• In electricity saving mode, if you press this button for

2 seconds, then the appliance is in local time setting mode.

• If you press this button in the setting mode, then the appliance will start.

11. stop “ ”• If you press this button in setting mode, the system

will cancel the setting and return to stand-by mode.• In working mode, the appliance shuts off if this

button is pressed.

Operational instruction for functions Before pressing the start button “ ” to begin the operations (not including electronic scale and local time setting), make sure that the bowl body and bowl lid are connected well, i.e. “ ” will be displayed on the LCD screen. The appliance cannot be turned on with warning sound and “ ” on the LCD. As each function is finished, “End” will be displayed with warning sound.

1. Timer

Note: Timer cannot work without any function is selected in advance and time cannot be set during the process of working. It can be used only with four functions: heating, blending, kneading dough, and steaming.In stand-by mode or setting mode, press timer “ ” which will then flickering on LCD screen with minute blinking. Press “ ”or “ ” to set minute and then press “ ”, the second will flicker. Press “ ”or “ ” to set seconds and then press “ ” to confirm the time you have set. Timer stops flicker.The maxi time for setting is 60 minutes and the display form is “XX:XX” (minute: second).

2. Turn off the appliance

Manual turning offa) During working process, the appliance will stop working immediately and return stand-by mode when pressing stop button “ ”.Automatically shut offa) If the user has set the time, “End” will appear on the LCD screen with warning sound to remind the end of the operation after the time counts down to the end.b) If there is no time set, the appliance will shut off without any operation in 15 minutes for fear that the

user will forget to turn off it and with “End” appearing on the display and warning sound to show the end of the operation.

3. Pause Button

Operational instructions for PAUSE BUTTONWhen unit is in progress:Press button. The unit will switch to pause mode and stop. Information already programmed into unit will not be lost. Pause will flash on screen. The maximum pause time is 15 minutes.Using electronic scales while in pause mode – To use electronic scales while unit is in progress – Press button . The unit will switch over to pause mode and stop. Information already programmed into unit will not be lost. Press the button – the LCD will display the programmed settings and the icon will flash.Press button again and the electronic scale function will stop and previous functions programmed into unit will continue.In BLEND mode: Press button. The unit will switch to pause mode. This allows you to re set speed, time and scale function.In TEMPERATURE mode:Press button. The unit will switch to pause mode. This allows you to re set temperature, time and scale function.In BLEND and TEMPERATURE mode: Press button. The unit will switch to pause mode. Allowing the blend, temperature, time and scales functions to be re set.In COOKING mode:Press button. The unit will switch to pause mode. This allows you to re set time, rotate speed (1-5 gradual speed increase) and scale function.In KNEAD mode:Press button. The unit will switch to pause mode. This allows you to re set time (max 2 minutes) and scale function. Press button and previous functions programmed into unit will continue.

16

 

 

 

 

 

 

 

 

 

 

 

INSTRUCTION FOR USE

Blending + timer + adjusting speedNote: step 1 and step 2 are in no particular order.• Step 1: choose blending function and set up rotation • speed. Refer to: chapter of “blending + adjusting

speed” • Step 2: time setting Note: this step can be chosen or

skipped. Refer to: chapter of “Timer” • Step 3: start the appliance Note: this step can be

chosen or skipped. In setting mode, when “ ” is pressed, the appliance will begin to work at the set speed for the set time, and functional icon “ ” remains on to show the blending mode.

• Step 4: rotation speed can be reset in blending mode.Note: this step can be chosen or skipped.Refer to: the third step in chapter of “blending + adjusting speed”

• Turn off the appliance Refer to: chapter of “turn off the appliance”

Blending + adjusting speed + heating + adjusting temperature + timing(Note: the following step 1 to 3 are in no particular order)• Step 1: choose blending and set rotation speed.

Refer to: step 1 in chapter of “blending + adjust speed”

• Step 2: timer setting Note: this step can be chosen or skipped. Refer to: chapter of “timing ”

• Step 3: choose heating and set up temperatureNote: this step can be chosen or skipped. After pressing heating button “ ”, blending icon “ ” remains light instead of flicker which means the speed is nonadjustable. If heating icon “ ” flickers, the heating temperature can be adjusted by “ ” or “ ”. (There are totally seven temperature levels, including 37°, 50°, 60°, 70°, 80°, 90° and 100°.) The temperature will increase or decrease by one level when “ ” or “ ” is pressed each time. The chosen heating temperature level will flicker in display with default temperature of 37°.

• Step 4: start the appliance. When the “ ” button is pressed, the appliance starts to work in accordance with the rotation speed, temperature and time which have been set up. Functional icons “ ” and “ ” will appear together on the LCD display to show the condition of blending and heating.

17

4. Blending

Processing beef: each time 200g can be processed and the max continuous operation can continue for 15 minutes. When processing beef, ice or any other stubborn food, do not let the product continuously operate, only use on-off way, operate 30 seconds then rest 30 seconds. Blending + adjusting speed• Step 1: choose blending and set up rotation speed.In

stand-by mode, after pressing blending button, “ ” functional sign will flicker on the LCD. At this time rotation speed level (10 levels in total) can be set by pressing “ ” or “ ”. Each time you press “ ” or “ ”, the rotation speed will increase or decrease one level. The chosen rotation speed will blink on the display. ( the default rotation speed is level one).

• Step 2: start the appliance After “ ” is pressed down, the appliance starts to work according to the settings with “ ” is on to show the appliance is in blending mode.

• Step 3: adjustment of rotation speed in blending mode. Note: this step can be chosen or skipped.In blending mode, you can press blending button to make functional sign “ ” flicker on the LCD and then press “ ” or “ ” to reset the rotation speed.

Note: a) Adjustable rotation speed: flickering “ ” on the LCD means that rotation speed can be adjusted by pressing “ ” or “ ”. If you want to confirm your setting, you can just press “ ” again. Now the speed cannot be adjusted and “ ” remains light.

b) Nonadjustable rotation speed: if the functional icon doesn’t flicker on the display, that means the speed adjustment function is locked and the speed cannot be adjusted. To unlock it, you can press “ ” which will then flicker on the display. Now the speed is adjustable.• Step 4: turn off the appliance Refer to the chapter of

“turn off the appliance”.

INSTRUCTION FOR USE

• Step 5: rotation speed is allowed to be reset in blending mode.Note: this step can be chosen or skipped.Refer to: step 3 in chapter of “blending + adjusting speed”

• Step 6: heating temperature is allowed to be reset in blending mode. Note: this step can be chosen or skipped. Heating temperature can be reset in blending mode. Press heating button“ ” the icon of which will then flicker on the display. Now you can set the temperature level freely with “ ” or “ ”. Note: a) Condition of heating temperature adjustable: the Flickering icon “ ” on LCD screen means the temperature is allowed to be adjusted by “ ” or “ ”. The temperature level can be confirmed by pressing heating button “ ” again with icon “ ” on the display remaining light. Now the heating temperature cannot be adjusted.

• b) Condition of heating temperature nonadjustable: if the icon “ ” on the LCD screen doesn’t flicker, then the temperature adjustment button is locked and cannot be activated. To unlock the button, you should press the heating button “ ”, then the temperature can be reset with “ ” flickering on the LCD display. c) When the bowl body’s temperature exceeds 60℃ with rotation speed over level 5, the appliance will automatically change the speed to level 5 in order to avoid scalding by the splashed food.

• Step 7: turn off the appliance. Refer to: the chapter of “turn off the appliance”

5. Heating:

Heating + adjusting temperature• Step 1: choose heating and set up temperature

After the heating button is pressed in stand-by mode, functional icon “ ” will flicker on the LCD display and the temperature can be set up by “ ” or “ ”. (There are seven temperature levels, including 37° , 50° , 60° , 70° , 80° , 90° and 100℃.) The temperature will increase or decrease by one level when “ ” or “ ” is pressed each time. The chosen heating temperature level will flicker in display with default temperature of 37°.

• Step 2: start the appliance. After the button“ ” is pressed, the appliance starts to work at the set temperature. Functional icon “ ” remains light on LCD screen to show the heating condition of the appliance.

• Step 3: the heating temperature can be reset in heating mode. Note: this step can be chosen or skipped. The heating temperature can be changed in heating mode. Press the heating button “ ” and it will flicker on the LCD display. At this time the temperature can be adjusted freely by “ ” or “ ”.

• Note: a) The condition of adjustable heating temperature: the fact that icon “ ” flickers on the LCD screen means that the temperature is allowed to be changed by “ ” or “ ”. To lock the temperature setting, you can press “ ” which will remains light on LCD screen to show the temperature adjustment is not allowed. b) the condition of nonadjustable heating temperature: if the icon “ ” doesn’t flicker on the screen, then the temperature setting is not allowed. To unlock the temperature setting button, you should press the heating button “ ” and it will flicker on the LCD screen which means the temperature is adjustable.

• Step 4: turn off the appliance Refer to: the chapter of “turn off the appliance”

Heating + timing + adjusting temperature ( Note: step 1 and 2 are in no particular order) • Step 1: choose heating function and set up

temperature: Refer to: step 1 in the chapter of “Heating + adjusting temperature”

• Step 2: timing. Note: this step can be chosen or skipped.Refer to: the chapter of “timing”

• Step 3: start the appliance. After the button “ ” is pressed, the appliance starts to work according to the temperature and the time set in advance. The function icon “ ” remains light on the LCD screen to show the heating condition. The flickering icon “°” means that the temperature of the food hasn’t reached the set temperature and vice versa. The displayed temperature is just for information.

18

INSTRUCTION FOR USE

• Step 4: the temperature can be reset in heating mode. Note: this step can be chosen or skipped.Refer to: step 3 in the chapter of “heating + adjusting temperatre”

• Step 5: turn off the appliance Heating + adjusting temperature + blending + adjusting • rotation speed + timing. ( Note: step 1 to 3 are in no

particular order)• Step 1: choose heating function and set up the

temperature. Refer to: step 1 in the chapter of “ heating + adjusting temperature”

• Step 2: timing. Note: this step can be chosen or skipped. Refer to: the chapter of “timing”

• Step 3: choose blending function and set up rotation speed. Note: this step can be chosen or skipped. After the blending button is pressed down, functional icon “ ” becomes light instead of flickering which means the temperature setting button is locked. With blending icon “ ” flickering on LCD screen, you can adjust the rotation speed freely by “ ”or “ ”. (There are 10 rotation speed levels in total, from 1 to 10). The rotation speed will increase or decrease by one level each time you press “ ”or “ ”. The selected rotation speed will flicker on the display and the default speed is level 1.

• Step 4: start the appliance. After the button “ ” is pressed down, the appliance starts to work according to the set rotation speed, temperature and time. Function icons “ ” and “ ” will appear together on the LCD screen to show the heating and blending mode of the appliance.

• Step 5: the heating temperature can be reset in heating mode. Note: this step can be chosen or skipped. Refer to: step 1 in the chapter of “ heating + adjusting temperature”

• Step 6: rotation speed can be reset in heating mode.Note: this step can be chosen or skipped. Rotation speed can be reset in heating mode. Press the blending button “ ” to have function icon “ ” flicker on the LCD screen and then set up the rotation speed freely by pressing “ ” or “ ”.

• Note: a) Condition of adjustable rotation speed: the flickering icon “ ” on the LCD screen means the rotation speed is allowed to be adjusted by pressing “ ” or “ ”. To lock the rotation speed setting function, just press the blending button “ ”again and its icon will remains light on LCD screen to show that the rotation speed cannot be adjusted. b) Condition of nonadjustable rotation speed: if the icon “ ” doesn’t flicker on LCD, that means the rotation speed setting function is locked and inactivated. To activate it, just press the blending button again. Then “ ” will flicker on LCD to show that the speed can be adjusted. c) If the temperature of bowl body exceeds 60℃ with its rotation speed over level 5, the appliance will change the rotation speed to level 5 for fear that the liquid in the bowl will splashed out and cause scald to the people if the speed is over level 5.

• Step 7: turn off the appliance. Refer to: the chapter of “turn off the appliance”

6. Kneading dough:

Making dough: following the instruction, use separate function to make dough. Each time make 200 g four with 120 g water, to operate 2 minutes, rest 1 minute for next cycle. It can only continuously operate for 5 cycles. After it should be cool down for 1 hour before use it again. (Note: step 1 and 2 are in no particular order)• Step 1: choose Kneading dough function. After the

kneading dough button “ ” is pressed down in stand-by mode, the functional icon “ ” will flicker on LCD screen to show the setting of kneading dough.

• Step 2: timing. Note: this step can be chosen or skipped. Refer to: the chapter of “timing”

• Step 3: start the appliance. After pressing down the button “ ”, the appliance/ starts to work according to the settings. Functional icon “ ” remains light on LCD screen to show the appliance is in the condition of kneading dough.

• Step 4: turn off the appliance Refer to: the chapter of “ turn off the appliance”

. . . .

19

INSTRUCTION FOR USE

7. Cooking

(Note: step 1 and 2 are in no particular order)• Step 1: choose cooking. After pressing cooking

button “ ” in stand-by mode, the functional icons “ , ” will flicker on LCD screen. Now the rotation speed ( from 1 to 5) can be chosen by “ ” or “ ”. The chosen rotation speed will flicker on the display. The default rotation speed is level 1.

• Step 2: timing. Note: this step can be chosen or skipped. Refer to: the chapter of “timing” Step 3: start the appliance. After pressing down the button “ ” , the appliance starts to work according to the settings. Functional icon “ ” remains light on LCD screen to show the appliance is in the condition of cooking.

• Step 4: the rotation speed is allowed to be reset in cooking mode. Note: this step can be chosen or skipped. The rotation speed is allowed to be reset in cooking mode. Press the blending button “ ” to make the icon “ ” flicker on LCD screen, then the rotation speed can be set up by “ ” or “ ”.

• Step 5: turn off the applianceRefer to: the chapter of “turn off the appliance”

8. Turbo boost:

• Step 1: In stand-by mode or Turbo boost mode, if you press the Turbo boost button and maintain the pressure, the appliance will get into Turbo boost mode immediately, blending at the highest speed of the blade. The icon “ ” will appear on LCD screen and the working time is accumulated on the screen in the form of “XX:XX”.

• Step 2: Remove the hand pressing on the Turbo boost button “ ” , the appliance will stop blending immediately. The working time is showed on the screen in the form of “XX:XX” (minute: second)

9. Electronic scale: Note: the max load of the weighing plate: 3Kg. Error code of “E4” will appear if the weight exceeds the max weight of the scale. The resolution rate of the scale: 4g. If press this button in weighing mode, then the weight on LCD will clear to zero. Weighing and clearing to zero of the electronic scale• Step 1: In stand-by mode, the functional icon “ ”

turns on and “0000” (unit: g) is displayed on the screen after the electronic scale button “ ” is pressed.

• Step 2: Put the food on the weighing plate, and the food weight “XXXX” (unit: g) will be showed on the screen.

• Step 3: Press the electronic scale button again, and the weight clears to zero with “0000” (unit: g) appears on the screen. you can add other food to the weighing plate whose weight will be showed on the screen.

• Step 4: Repeat step 3 and you can weigh the ingredient each time you add to the scale.

10. Local time setting

Time setting• Step 1: Just after the connection with electricity or no

operation in 30 seconds in stand-by mode, the LCD screen will display the local time.

• Step 2: Press down “ ” for 2 seconds and the local time is to be set. Press the “ ” or “ ” to choose the hour. The time is 24-hour clock.

• Step 3: After the hour is adjusted to be right, press “ ” to enter into minute setting. Adjust the minute by “ ” or “ ”.

• Step 4: If the minute is adjusted to be the right one, then press down the button “ ” to confirm the local time setting and the appliance return to stand-by mode.

20

THINGS TO REMEMBER

Sleep modeIf the power switch of the Thermo Chef Natura is on but without any operation, it will enter into sleep mode in order to save electricity. At this time, the backlight of the LCD display is off with only local time displayed. The power consumption of the Thermo Chef Natura in sleep mode is less than 1W. If you want to restart the appliance, what you need to do is press any button on the control panel. If you do not need to use Thermo Chef Natura for a long time, we suggest you pull out the plug from the outlet.

Electronic motor protection:The motor protection program monitors the working condition of the motor and make the motor stop working when something which will cause damage to the appliance is about to take place. Thermo Chef has recipe attached. Generally speaking, if you use it according to the guidance in the recipe, the motor protection program will not start. But if the food to be processed exceeds the quantity required, this protection program will start immediately and make the motor stop working. In this case, error code ”E5” will appear on the display panel and what you need todo is as follows:• Turn of the power switch at the back of the appliance• Take apart the blending bowl and open it to see

whether there is food blocked the blades.• Take away some food from the bowl or add some

liquid.• Put the blending bowl on the appliance again• Turn on the power switch and choose the relevant

speed practically. Restart the FP.• Note: it is better to wait 3 to 5 minutes for the

appliance to cool down before restarting.• If error code (E5)still appears on the screen after

the appliance cooling down, please contact our Customer Service Department.

First use and overloadWhen the appliance is used for the first time or if the motor is overloaded during food preparation, the motor may transmit some abnormal smells. These will be reduced/eliminate, as usage continues.

21

CLEANING

Just like all new appliances or tableware, Thermo Chef Natura should be cleaned thoroughly before use, especially the blade, bowl cover, scraper, blending bowl and basket filter.

How to clean the blender bowl and the bowl lidNow, clean the inside and outside of the bowl with hotwater (not including the blade) (picture 1)Wash the scraper shaft, butterfly bar, basket filter, measuring cup, bowl lid and steamer.If there are stickysubstances which are not easy to clear away on the stainless steel part of the blending bowl, please use stainless steel detergent to help clean it.

Alternatively you can mix 2 tbs of Bi Carb Soda, 2 tsp of lemon juice with one litre of water and allow to soak in the blender jar for a couple of hours. To remove any odour that may occur in the lid it can be soaked in water and vinegar overnight or placed in the freezer overnight.

How to clean blade base:Hold the base bottom and wash it under the water with blade up towards ( picture 2), or clean it with brush or in the Dish Washer.

How to clean steamerClean the steamer, steaming mesh and the cover with warm soapy water or in the dish washer.Clean them with soft cloth and moderate detergent (picture3). Do not use sharp articles or steel brush to avoid scratches.

do not use dish washer to wash the blending bowl or sharp articles to help clean any part so as to avoid damage of the appliance or any safety risks.

!

Please do not wash the blades in the dish washer for a long time, or else the shaft gasket would be damaged.

22

NOTICE

IMPORTANT NOTICE

CLEANING

How to clean the main bodyPlease pull out the plug from the outlet before cleaning.

Clean it with soft cloth and moderate detergent. See picture 4.Use the water carefully so as to prevent theinside of the appliance from moisture.

Other information about cleaningThe color of some plastic articles may fade lightly.If there is dirt on the blade, blade base, measuring cup and the cover, clean them by rotating for several times at speed 5 or 6 with 1L clean water and several drops of detergent.For good ventilation, please do not cover the blending bowl with the measuring cup.

All the parts except the main body and blending bowl can be washed in the dish washer.Some ingredients such as curry and carrot juice may stain the container.

Avoid risk of electric shock Please do pull out the plug from the outlet when you

clean the appliance or put it away for a long time. Do not immerse the Thermo Chef Natura in the water

or wash it with great amount of water. Just clean it with wet cloth and do not let the water or some other substances enter into the main body of the Thermo Chef Natura

!

4

23

�

�

IMPORTANT NOTICE

NOTICE

NOTES FOR YOUR OWN RECIPES

Please refer to the attached recipe book during cooking which will make the cooking simpler and more effective. The order of ingredients Please take the order of ingredients you will use into account when preparing the food according to your recipe. Weighing Before weighing the first ingredient, please press the electronic scale button “ ” on the control panel to have the weight clear to zero (0.000). Note: do not add ingredients over 2L into the blending bowl.

Heating timeThe heating time depends on the following aspects: a. The initial temperature of the ingredients to be processed.b. The quantity, weight and volume of the ingredients.Attention: total volume should not exceed the capacity of the main pot or steamer.c. The thermal conductivity of the ingredients to be processedd. Heating degreee. Blending speedf . The use of accessories (whether the pot mesh/steamer is to be used or not)

24

TROUBLE-SHOOTING

Thermo Chef has a self-diagnostic function, namely when the fault happens, the fault information will be shown. If the fault still cannot be solved by unplugging the plug and connecting it again, Please contact our customer service department and tell us the fault code displayed on the screen.

Fault code and eliminating methods:

Risk of electric shock

Please check regularly the power supply cord, blending bowl and other accessories. Please stop using if any damage is found and contact New Wave Kitchen Appliances customer service centre for repairing.

25

Fault code Code meaning Possible reasons Methods to solve them

Cup or cover not installed

1) Forget to cover the lid�2) The bowl cover or steamer isn’t installed onto the bowl body in place.

Cover the bowl cover, and make sure the bowl cover and body are installed

There is no water or the water hasbeen boiled away in the bowl during heating.

Wait until the bowl temperature falls down to room temperature.Bowl body overheating

Motor overheatingOverloading motor works for a long time because of too much food in the bowl

Wait until the motor temperature falls down to room temperature.

The food on the scale plate is more than 3Kg

Electronic overweight Take away some food from the scale plate

Motor stall or overloadThe motor is blocked because of overload caused by too much food in the bowl

Reduce the food appropriately and unplug the plug and then reconnect it to the power supply

Motor temperature sensor Is open

The temperature sensor of the motor is damaged

Contact the customer service department of our company

No mug/cup temperature sensor Is open

1) there is no cup installed�2) the bowl is not correctly installed which causes poor contact of connecting pole and the machine�1) the temperature sensor of the bowl body is damaged

Install the bowl and make sure thebowl and the machine is installed in place. Unplug the machine and then reconnect it the power supply.

E0

E2

E3

E4

E5

E6

E7

HANDY SUGGESTIONS

It is important before starting to work with your Thermo Chef Natura to please read the attached instructions to get the most out of your appliance and avoid warranty issues. It is also important to be aware of the safety and management requirements referred to in the Instruction Manual.

The ability to select the time affects the degree of milling, baking, spraying, etc. as needed specifically for each recipe. The cooking time will normally be at a temperature of 100°C (except for milk and cream that can overflow), although the chosen time can be reduced if required when cooking (eg if boiled too). Sometimes, as indicated in some cases, remove the cup to promote evaporation. Another possibility offered with the Thermo Chef Natura is that it can gradually increase speed, based on the temperature, which is very useful for spraying (with blades very dry), grinding (from speed 3), grating or grinding. It also has the function to leave large pieces of food type hard chocolate, cheese, etc. You can also use when an ingredient is jamming the blades if the temperature does not exceed 90°C. The steamer container is quick and simple, but must take into account certain considerations. Whenever you use the steamer it must be done with water or other liquid in the bowl. For 30 minutes cooking the amount of water should be at least ½ litre for every 15 minutes extend cooking time, you should increase the water jug by 250g. There are certain foods that can be done in the steamer or basket.

Whenever you use the basket make sure the ingredients in the bowl are chopped or ground.

26

MEASUREMENT GUIDE

Use as a Guide

You may also find useful the table measurements that we offer below, although it should be noted that the measurement of fluids is usually expressed in grams (g) and not in litres (l) and it would be correct to convert to millilitres (ml). ie 100 grams equals 100ml

These are approximations.

Product Grams MCRice 100g 1 CupSugar 100g 1 CupWheat Flour 60g 1 CupCornmeal 50g 1 CupLiquids 100g 1 CupGrated Cheese 50g 1 Cup

Other common equivalences that can serve as a reference are:

In liquid1 cup (of tea) 150 ml1 cup (of coffee) 100 ml (shot)1 glass of water 200 ml1 glass of wine 100 ml1 Tbsp 15 ml1 cup of brandy 40-50 ml

In other foods1 Tbsp 1 Tablespoon1 tablespoon flour 15 g1 tablespoon sugar 20 g1 tablespoon oil 15 g1 tablespoon rice 20 g1 tablespoon butter 15 g1 tablespoon salt 15 g

In other foods1 tsp 1 teaspoon1 knob of butter 10 g1 onion 100 g1 medium lemon 100 g1 medium apple or 1 pear 100-150 g1 medium potato 150-200 g1 tomato 100 g1 carrot 100 g1 slice of ham 40 g1 slice of cooked ham 40-50 g1 slice of regular bread 20 g1 medium egg 55-60 g

Also good to know…

For the Thermo Chef Natura to operate is necessary for the lid to be closed. When the selected time has passed be careful removing the lid with steam accumulated. Always make sure that speed is 0. Normally the selection process will be time function, temperature and speed, as it is used in all recipes. The spatula will be very useful for removing food and scraping the walls of the bowl during the development process. If food is not on the base of the bowl it will not be cooked properly. If you are going to use the bowl to make a recipe which is cold after a hot recipe you must crush ice in the bowl to cool quickly. Always consider the quantities required as the bowl has limited capacity. The Butterfly is designed for processes that do not require the crushing of food.

27

2 YEAR WARRANTY

Date of Purchase

Name of Retail Outlet

Address of Retail Outlet

Customer Name

Customer Address

Email Address

Please return this copy to New Wave Kitchen Appliances to receive a 2 year limited warranty on your oven or log onto newwaveka.com.au and fill out your warranty on line.

New Wave Kitchen Appliances PO Box 421 Moorabbin BC Moorabbin VIC 3189 Telephone +61 3 9553 7211 Facsimile +61 3 9553 7233

Warranty Conditions

1. Warranty void if unit tampered with 2. Warranty does not cover any broken parts 3. Warranty does not cover postage returned thermo chefs

Please retain a copy of the Warranty and the purchase receipt as proof of purchase. We will guarantee this product against defects caused by faulty workmanship and materials for 24 months domestic use. During this Warranty period New Wave Kitchen Appliances will replace any defective product. However, if the product includes a number of accessories, only the defective part of the accessory will be replaced. New Wave Kitchen Appliances reserves the right to make minor adjustments instead of replacing the product or accessory. Packaging instructions will not be replaced unless faulty.

Subject to your statutory rights as to the merchantable quality of the product or accessory. In the event of a product or accessory being replaced during the Warranty, the Warranty on the replacement will expire at the original date i.e. 2 years from the original purchase date. This Warranty excludes defects caused by the product not being used in accordance with the instructions, accident damage, misuse or being tampered with by unauthorised persons. The replacement Warranty also excludes breakages and consumable items. This Warranty covers only units sold in Australia.

28

NEW WAVE APPLIANCE RANGE

5-in-1 Cucina Multi Cooker

Induction Cook Top

Pizza Makers

Crema Latte - Milk Frother

29

After Sales Service

This appliance is built to the very highest of standards. There are no user-serviceableparts. Follow these steps if the unit fails to operate – 1. Check instructions have been followed correctly2. Check fuse has not blown3. Check the mains supply is functional If the appliance will not operate, return the appliance to place of purchase forinspection. If the appliance is outside the warranty period please return to the Customer Service Department, following the steps below : 1. Pack it carefully (preferably in the original carton) and ensure the unit is clean2. Enclose your name and address on all correspondence3. Give the reason why you are returning it4. Send it to our Customer Service Department at the address below:

Customer Service DepartmentNewwave Kitchen Appliances PO Box 421 Moorabbin BC Moorabbin VIC 3189Phone: 1800 337 211Email: info@newwaveka.com.au newwaveka.com.au

AFTER SALES SERVICE

30

Newwave Kitchen Appliances PO Box 421 Moorabbin BC Moorabbin VIC 3189

Phone: 1800 337 211Email: info@newwaveka.com.au newwaveka.com.au