Installation Steps of NaviCLI

download Installation Steps of NaviCLI

of 14

Transcript of Installation Steps of NaviCLI

  • 8/22/2019 Installation Steps of NaviCLI

    1/14

    1

    Download and Installation of Navisphere CLI

    tool to manage EMC storage devices using

    Dell Management Console.

    Dell Product Group - Enterprise

    Dell Technical White Paper

  • 8/22/2019 Installation Steps of NaviCLI

    2/14

    2

    THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND

    TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY

    KIND.

    Dell, the DELL logo, PowerEdge, PowerVault, and Dell EqualLogicare trademarks of Dell, Inc.; Microsoftis a registered trademark

    of Microsoft Corporation in the United States and/or other countries. EMC, CLARiiON, and UltraFlex are trademarks or registered

    trademarks of EMC Corporation.Altiris is a registered trademark of Symantec Corporation.

    Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or

    their products. Dell disclaims proprietary interest in the marks and names of others.

    2011 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the express written permission of Dell, Inc. is

    strictly forbidden. For more information, contact Dell.

  • 8/22/2019 Installation Steps of NaviCLI

    3/14

    3

    Contents

    1. INTRODUCTION ......................................................................................................................................... 4

    2. TO DOWNLOAD THE NAVICLI INSTALLER (NAVICLI.EXE), .................. .......... .......... ........... ...... 4

    3. AFTER LOG IN GO TO HOME -> SUPPORT -> SOFTWARE DOWNLOADS AND LICENSING -> DOWNLOADS J-O -> NAVISPHERE SERVER SOFTWARE. .......... ........... .......... .......... ........... ...... 5

    4. ON NAVISPHERE SERVER SOFTWARE PAGE CLICK ON SHOW ALL DOCUMENTS (TOP

    RIGHT CORNER). ....................................................................................................................................... 6

    5. DOWNLOAD THE LATEST VERSION OF NAVISPHERE CLI FOR WINDOWS OS. (EX:NAVISPHERE CLI (WINDOWS - ALL SUPPORTED 32 AND 64-BIT VERSIONS) 7.30.11.0.38) ... 7

    6. CLICK ON "RUN" IN THE FILE DOWNLOAD DIALOG IF YOU PLAN TO INSTALL NAVICLION THIS SYSTEM. OTHERWISE YOU CAN SAVE THE FILE AND TRANSFER IT TO THE

    SYSTEM FOR INSTALLATION................................................................................................................ 7

    7. ENSURE THAT YOU HAVE THE APPROPRIATE PRIVILEGES BEFORE CLICKING NEXT. .. 8

    8. ON THE CHOOSE INSTALL FOLDER PAGE, CHOOSE THE LOCATION WHERE YOUWANT TO INSTALL NAVICLI AND CLICK NEXT. ................ ........... .......... .......... ........... .......... ........ 9

    9. ON THE NAVISPHERE CLI OPTIONAL FEATURES PAGE, SELECT THE FOLLOWING

    OPTIONS: ................................................................................................................................................... 10

    10.ON THE SECURITY FILE CREDENTIALS PAGE, YOU CAN OPT TO SAVE THE USERCREDENTIALS TO A SECURE FILE SO YOU DO NOT HAVE TO ENTER THEM EVERY

    TIME YOU USE A NAVICLI COMMAND. ................ .......... ........... .......... ........... .......... .......... ........... .. 11

    11.ON THE CONFIGURE OPTION SETTING PAGE, SELECT LOW (THE CERTIFICATE WILLNOT BE VERIFIED). ................................................................................................................................. 12

    12.ON PRE-INSTALLATION SUMMARY PAGE, CLICK ON INSTALL......... .......... ........... .......... ...... 13

    13.WHEN THE INSTALLATION COMPLETES, CLICK DONE. ........................................................... 14

  • 8/22/2019 Installation Steps of NaviCLI

    4/14

    4

    1. Introduction

    Navisphere

    CLI or NaviCLI is the command line interface to manage data storage systems from

    EMC

    Corporation.

    NOTE: Ensure that you have administrator privileges to the system registry on the system you

    want to install NaviCLI.

    2. To download the NaviCLI installer (NaviCLI.exe),

    Go to EMC web-site:https://powerlink.emc.comExisting users should enter Username and

    Password to login. For new users, click on the "Register Now" button in the right pane to create

    an account and register your EMC storage devices.

    Figure 1: EMC Login page

    https://powerlink.emc.com/https://powerlink.emc.com/https://powerlink.emc.com/https://powerlink.emc.com/
  • 8/22/2019 Installation Steps of NaviCLI

    5/14

    5

    3. After Log In go to Home -> Support -> Software Downloads and Licensing ->

    Downloads J-O -> Navisphere Server Software.

    Figure 2: EMC Home page

    https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/appmanager/km/secureDesktop?_nfpb=true&internalId=0b014066803fb212&rnavid=searchhttps://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/appmanager/km/secureDesktop?_nfpb=true&internalId=0b014066803fb212&rnavid=search
  • 8/22/2019 Installation Steps of NaviCLI

    6/14

    6

    4. On Navisphere Server Software page click on Show All Documents (top right corner).

    Figure 3: Navisphere Server Software page

  • 8/22/2019 Installation Steps of NaviCLI

    7/14

    7

    5. Download the latest version of Navisphere CLI for Windows OS. (Ex: Navisphere CLI

    (Windows - all supported 32 and 64-bit versions) 7.30.11.0.38)

    Figure 4: Navisphere CLI Download page

    6. Click on "Run" in the File download dialog if you plan to install NaviCLI on this

    system. Otherwise you can save the file and transfer it to the system for installation.

    Figure 5: Navisphere CLI Installation Wizard

  • 8/22/2019 Installation Steps of NaviCLI

    8/14

    8

    7. Ensure that you have the appropriate privileges before clicking Next.

    Figure 6: Introduction

  • 8/22/2019 Installation Steps of NaviCLI

    9/14

    9

    8. On the Choose Install Folder page, choose the location where you want to install

    NaviCLI and click Next.

    Figure 7: Choose Install Folder

  • 8/22/2019 Installation Steps of NaviCLI

    10/14

    10

    9. On the Navisphere CLI Optional Features page, select the following options:

    Include Navisphere CLI in Environmental Path and click Next.

    Figure 8: Configure Optional Settings

  • 8/22/2019 Installation Steps of NaviCLI

    11/14

    11

    10.On the Security File Credentials page, you can opt to save the user credentials to a

    secure file so you do not have to enter them every time you use a NaviCLI command.

    Figure 9: Configure Optional Settings (Create Security File)

  • 8/22/2019 Installation Steps of NaviCLI

    12/14

    12

    11.On the Configure Option Setting page, select Low (the certificate will not be verified).

    Figure 10: Configure Optional Settings (Verification Level)

  • 8/22/2019 Installation Steps of NaviCLI

    13/14

    13

    12.On Pre-Installation Summary page, click on Install.

    Figure 11: Pre-Installation Summary

  • 8/22/2019 Installation Steps of NaviCLI

    14/14

    14

    13.When the installation completes, click Done.

    Figure 12: Install Complete