Installation of RSA/K&C Shallow Mount Bollards · Company Profile RSA Protective Technologies is at...

Installation of RSA/K&C Shallow Mount Bollards

RSA Protective Technologies, LLC. 1573 Mimosa Court Upland, California 91784 (909) 946-0964 FAX: (909) 946-1186 [email protected] www.rsaprotect.com

POC: Rick Adler RSA Protective Technologies, Copyright 2008

1

Site before RSA/K&C Shallow Mount Bollards

RSA Protective Technologies, Copyright 2008

2

TYPICAL INSTALLATION of DS-22, K12


3


4

6.5” Excavation for RSA/K&C

Shallow Mount Bollards


5

Existing pavers to be replaced over concrete pour


6


7

Installation of RSA pads off truck into excavated hole – 52 bollards/day

Non-structural spacer rings for bollard sleeves


8

Sidewalk excavation prepared according to

RSA/K&C specifications

Completed pad (including rebar) lifted off truck


9

Drawn bollard line


10

Exact placement of custom fabricated, numbered pad with numbered custom bollards and integral rebar positioned at pre-specified

excavation site


11

Rough position of bollard pad. If required shim pad into position.


12

Openings in bollard to allow same concrete to fill tubes as

well as excavation.

NOTE: Non-structural spacer ring


13

Same On-Center spacing as multiple

bollards on same pad

Positioning adjacent bollard pads by using factory measured manufactured On-Center spacing between bollards


14

Two pads initially placed


15

Specially configured corner unit. Maintains bollard line from perpendicular streets with integral ADA

wheelchair access ramp at center of corner. RSA Protective Technologies, Copyright 2008

16

Corner unit placed inside excavation RSA Protective Technologies, Copyright 2008

17

Bollard pad delivered by fork lift truck


18

Final alignment of bollards


19

Casting 3,000 psi concrete


20


21

ADA Wheelchair ramp –integral to pad

Corner unit concreted


22

Straight line of concreted

bollards RSA Protective Technologies, Copyright 2008

23


24


25

A

B

Finished Project 246 Installed

Shallow Mount Bollards


26

BC


27

B


28

C

D


29

D

E


30

E

F


31

F


32

F


33

F


34

F

G


35

G


36

G


37

G


38

G


39

H

G


40

H


41

H I


42

H


43

IJ


44

J

K


45

K


46

KA


47

RSA IS THE WORLD'S ONLY CERTIFIED FIXED BOLLARD MANUFACTURER WITH K4, K8 AND K12 SHALLOW MOUNT UNITS What do Embassies, Consulates, The U.S. Department of Defense, The U.S. Department of State, The U.S. Department of Energy, World Peace Organizations, Fortune 50 HQs, Law Enforcement Agencies, Religious Organizations, Airports, Train Stations, and Utilities have in common? For the past four years they have all trusted RSA Protective Technologies, LLC. to custom design and fabricate their Shallow Mount Bollard perimeter security needs.

RSA is the world’s leading inventor and fabricator of U.S. DOS and U.S. DOD shallow mount bollards. Over 10,000 RSA proprietary K4, K8 and K12 shallow mount bollards have been installed worldwide. We are the first choice for Architects, Structural and Civil Engineers, Security Consultants, Landscape Architects, Building Owners, Government Officials and other decision makers responsible for protecting key assets.

We have developed proven custom solutions to accommodate manholes, light standards, fire hydrants, electrical vaults, severe changes in elevation, landscape features and ADA wheelchair access ramps. Our Engineering Partner, Karagozian and Case along with our dedicated manufacturing facilities produces high tolerance bollard pads (with integral rebar attached) along with the excavation plan for the local contractor to prepare the site. Once the area is readied our trucks deliver the product that next morning (or evening if required) with product that has a fabrication tolerance of 1/8” over 20’ length right off the truck and into the prepared space. On average the installers can position 50 bollards in a day! This reduces the traffic control requirements, equipment rental, concrete and downtime at the site. With some solutions requiring only 6 ½” of excavation depth, RSA dramatically reduces the overall cost of the installation. RSA consistently proves to be the best solution for virtually every application - and the ONLY one where site conditions are challenging.

Call or contact us with your site plans and we’ll start working with you on your project immediately.

Rick Adler, President, RSA Protective Technologies

Company Profile

RSA Protective Technologies is at the forefront of the Perimeter Security Industry with customized package solutions for critical facility protection. Currently the U.S. design/manufacturing and installation leader in the Perimeter Security Industry and as a provider of physical barrier solutions of up to a K52 rating, RSA offers the only fixed, shallow foundation anti-ram bollards with up to a K12 rating. The unique design of these bollard pad systems, tested and certified by the US Department of State and US Department of Defense can result in up to 60% cost savings on installation.

RSA provides the highest-rated government tested perimeter security solutions available today-and is the only company on the Department of State List of Certified Anti-Ram Vehicle Barriers that provides a fixed, shallow mount bollard system with a K4, K8 and K12 rating.

RSA/K&C Shallow Mount Bollard Pad™

RSA Protective Technologies has devised a unique modular fixed bollard system for advanced perimeter protection. These flexible, patent pending K4 to K12 Anti-Ram shallow-mount Foundation Bollard Pads provide unmatched ease of installation for anti-ram bollards that can be rapidly deployed to most environments and site conditions.

The patent pending, pre-fabricated units, including rebar, are delivered to the site ready for immediate installation. Unlike standard bollard-type perimeter installations where at least 4 to 5 foot deep trenches, unwieldy forms and laborious concrete pours create site disruptions, the Foundation Pad segments require only a 6 to 14 inch shallow trench and use 75% less concrete, resulting in a cost savings of up to 60%. RSA Protective Technologies has transformed facility force protection requirements into turnkey Perimeter Security Solutions:

• Facility and perimeter security risk assessment, including • Engineering site analyses of conditions, materials and soil type • Seamless architectural design integration and building aesthetics • Design drawings, specifications and cost estimates for materials

and installation • Complete custom manufacturing of units, delivered to the site

ready for instant installation • Installation oversight and inspection


49

Installation of RSA/K&C Shallow Mount Bollards · Company Profile RSA Protective Technologies is at...

Documents

Transcript of Installation of RSA/K&C Shallow Mount Bollards · Company Profile RSA Protective Technologies is at...