Version 1.0 Contents

Introduction.......................................................................................................................................................3

What's new in version 8.0.................................................................................................................. 3

Before installing the program......................................................................................................... 4

Installation and activation.........................................................................................................5

Possible problems ............................................................................................................................ 15

--- 2 15 ---

INTRODUCTION

AspenONE Software for engineering calculations and simulations are the basis for designing new processes

or upgrading existing processes to improve their performance. Software AspenONE used to construct

models and decision-making simulation results, providing:

* Consistency of data. AspenONE Software for engineering calculations and simulation help to reduce time

to implement the project and make the design process more convenient due to the integration and the

possibility of sharing data and knowledge between professionals and managers. Reliable simulation tools

provide greater confidence in the correctness of decisions.

* Communication of design, management and business - processes. Due to the open architecture software

products AspenONE significantly expands the scope of the models created for the purpose of engineering

calculations. These models can be used to control the factory settings, optimization, real-time planning and

business decision-making.

* Increased productivity and improved quality of engineering calculations. With the most complete ,

powerful and modern means of modeling and optimization , extensive databases , libraries of modular

operations , the opportunities of economic analysis , software AspenONE for engineering calculations and

simulation can significantly reduce the time to solve engineering problems .

* Improved efficiency of plants and reduce the payback period of the project. Accurate thermodynamic

models allow to design the optimum material, thermal and helper threads, pick up suitable for the process

equipment that helps you make better use of capital and increase profits with minimal additional

investment.

* Business - Forecasting. AspenONE Software for engineering calculations and simulation can accurately

assess the various options for investing in the early stages of project development.

All models in the software products AspenONE based on the knowledge of technological processes, and

combines all previous engineering innovations and advances in information technology, and yield reliable

results, tested in real industrial plants.

What's new in version 8.0

AspenONE V8 complex includes a new version of Aspen HYSYS, solids modeling technology acquired

when SolidSim takeover in 2012 and integrated in Aspen Plus, a new solution Aspen PIMS Platinum, a

new version of the software Aspen Collaborative Demand Manager, as well as innovative functionality in

advanced area of process control , oil and gas , and economic analysis.

The updated AspenONE V8 novice users and staff regularly use the process control system , quickly

examine the functionality of the product , and experienced professionals can take advantage of several new

features . "This is an important factor for working in industry companies, which often lack qualified staff -

believe in AspenTech. - Improvements in AspenONE V8 usability and visualization processes simplify

sharing system, while reducing the duration of the project and increasing productivity. "AspenONE

Engineering (DVD1, AspenONEV8.0DVD1.iso)

The new version of Aspen HYSYS, software for process simulation, process simulation brings additional

useful functionality with improved interface, streamline workflows and interactive analysis tools. Thanks to

a new HYSYS can simplify and accelerate the simulation optimized production processes in the oil and gas

industry - from raw material extraction to refining.

Integration into the simulation environment Aspen Plus technology SolidSim brought together before the

separation process of modeling of solids and liquids. Because of this the first time you can optimize all the

complex processes of oil and gas production, highlighted by AspenTech.

--- 3 15 ---

At the same time, in Aspen Plus and Aspen HYSYS added a new function - "Activation, which allows

technologists to effectively assess the potential for energy savings and reduce costs. Thus, through the

button "Activate" technologists can quickly determine the cost of design changes to reduce power

consumption, reduce juices drafting and saving operating costs in the future.

AspenONE Manufacturing & Supply Chain (DVD2, AspenONEV8.0DVD2.iso)

The new " Adaptive management processes (APC) in AspenONE APC is used to automate many of the

tasks that the traditional approach demanded involvement in staff. Thanks to the functional APC processes

automatically adapt to the new technological conditions. Companies can achieve stable high performance

process control due to the adaptability of systems in claim AspenTech.

Aspen PIMS Platinum - the best new product in the AspenONE Petroleum Supply Chain for production

planning in enterprises refining industry. Enables professionals to work together to create optimal plans.

Tools this module provides an opportunity to visualize and evaluate different scenarios in accordance with

production data to make the right and best solutions for the enterprise.

UI Aspen Collaborative Demand Manager is used to obtain detailed information necessary to satisfy

various customers projected needs. Continuous production enterprises can improve the accuracy of

estimating demand to improve customer service, reduce the amount of excess reserves and provide more

accurate data when making purchasing decisions.

Before installing the program

1. Read this manual from beginning to end, paying attention to points 5, 6 and 9.

2. Check whether the system requirements of the computer on which it is installed.

3. Check the integrity of the distribution program.

4. All programs are available to install and activate an account.

"Administrator" (not to be confused with a user account that has administrator rights). Information on how

to enable / disable the built-in account "Administrator" on the particular operating system, look for the

search on the internet.

5. During the installation, it is desirable to disable antivirus and Internet.

6. On the possible problems and solutions - see page 15.

--- 4 15 ---

Installation and activation

1. From folder Patch 1 run-LicGen.exe (ordinary self-extracting archive, which is packed in a license

generator). Window appears:

Choose the destination folder, click "Extract."

2. After unpacking run licenses generator:

Forward to the successful completion (the process can take a few minutes, this is normal):

The generator can be closed, the license LSERVRC_004_26B5B.lic (numbers will be different) is ready

to install the program and is in the folder C:\AspenONE

--- 5 15 ---

3. After successful generation license mount AspenONEV8.0DVD1.iso install disk image onto a

virtual drive (pre-installed), run setup.exe:

Choose Install AspenONE products.

4. In the next window, accept the license agreement:

And click Next.

--- 6 15 ---

5. If the program requires additional components, the following window will indicate that you want to

install:

Pressing Detailed Report, You can get more information.

Close the window by clicking Exit, and install those components that are needed.

6. Necessary program components can be found in the folder image - 3rd Party Redistributables.

Microsoft .NET Framework 3.5 SP1 and Microsoft .NET Framework 4.0 are self-explanatory for installation as Microsoft Windows Installer 4.5 it is hardly necessary;

Microsoft SQL Express 2008 R2 SP1 all installation options leave default only during installation Database Engine Configuration You have to choose Mixed Mode, enter the password twice (anyone

remember it or write just in case):

--- 7 15 ---

7. Run the installation again (repeat steps 3-4). Once the prerequisites are installed, the following

window appears:

Choose Custom Install.

8. On tab AspenONE Products choose those programs you want to install:

--- 8 15 ---

On tab File Location is better not to change anything:

Click Next.

9. May see the following window:

--- 9 15 ---

ISS services are part of the OS, but disabled by default - you must include them. For Win7-x64, it looks

like - just tick:

10. Run the installation again (repeat steps 3, 4 and 8). Once the prerequisites are installed, the following

window appears, where you must specify the license file:

Click Next.

--- 10 15 ---

11. The following window appears where you must specify the name of the computer (look in the

properties), user name and account password (if no password - need to create):

Click Next.

12. A window appears, showing all selected for installation:

--- 11 15 ---

Click Install Now and wait for the end of the installation:

For reference - the installation of all programs on a virtual DVD1 Win7-x64 with 4 GB of RAM took

about an hour.

Click Finish and reboot by clicking on the next screen Reboot Now (or reboot yourself, if the installer

does not offer a reboot):

--- 12 15 ---

13. From my 2-STRGXI2.zip STRGXI2.dll copy the file in two folders:

a. C:\Program Files (x86)\Common Files\Hyprotech\Shared

b. C:\Program Files (x86)\Common Files\AspenTech Shared (replace file)

14. Copy the generated license file to a folder: C:\Program Files (x86)\Common Files\Hyprotech\Shared

15. Run to test one of the programs, for example, AspenONE. In the window that appears, click Register

Later:

--- 13 15 ---

16. In the program, create a new account, and if the license is the "catch" that will be able to further work

with the program:

If something is done incorrectly, the following message appears:

Then something done wrong and need to look at all points where the error.

--- 14 15 ---

Possible problems When replacing STRGXI2.dll to folder C:\Program Files (x86)\Common Files\AspenTech Shared the

message that the file is in any process.

Solution:

1. To unlock, use Unlocker (program can be found in the folder Unlocker):

2. Now go to the Task Manager and stop the service, which is an executable AOLService270.exe,

- AOLSvc270:

--- 15 15 ---

3. After replacing the file again to run the service.

When replacing STRGXI2.dll to folder C:\Program Files (x86)\Common Files\AspenTech Shared the

message that the file is in use by any process could pop up.

Solution:

1. Try STRGXI2.dll in STRGXI2_v7.3.rar.

2. Just in case (you suddenly delete license or will use a new medicine)- in folder Patch\Backup

archive STRGXI2_original.rar preserved the original STRGXI2.dll, which you will need to copy to the folder

C:\Program Files (x86)\Common Files\AspenTech Shared (about possible problems when copying the file is

written above)

JekaKot, rutracker.org