Installation and Operation Manual for mobile GInfo (mGInfo ... for mGInfo o… · Operation Manual...
Transcript of Installation and Operation Manual for mobile GInfo (mGInfo ... for mGInfo o… · Operation Manual...
-
Installation and Operation Manual for mobile GInfo (mGInfo) on iOS Platform
Version 3.3
Slope Safety Division
Aug 2018
Any feedback and comments on the use of the mGInfo should be provided to GE/ES3, Slope Safety Division
-
Procedures for installing mobile GInfo (mGInfo) app in IOS-based devices
A. REGISTRATION
Only registered IOS-based devices will be allowed to run the mGInfo application. Afterfirst installation (see Section B for details) of the mGInfo, please launch the application and carry out the on-line registration as follows (re-registration is not required when updated version of mGInfo is installed, unless the settings of your mobile device has been changed):
In the Login page, click the 'Registration' icon and input 'CEDD Post' and 'Name' for on-line registration. Anonymous registration will not be entertained. Please then press the 'Submit' button. Registration will normally be activated within one working day.
'Login Page'
Click here for on-line registration
-
B. INSTALLATION
1. For IOS-based devices provided under the Workplace Mobile Services (WMS) by theDepartment, the mGInfo can be installed from the McAfee EMM which should have been pre-installed.
(a) Locate the McAfee EMM and start the program
McAfee EMM
-
(b) Select “Recommended Applications” and then GInfoMap for installation
Remarks: Under normal circumstance, there is no need to uninstall the mGInfo if it has previously been installed. You would try to uninstall the previous mGInfo if problems are encountered, otherwise, please seek technical support from CSU or SS Division.
Click GInfoMap to install the app
Select “Recommended Applications”
-
2. For installing the mGInfo on the IOS-based devices which are not provided under WMS bythe Department,
(a) Download the app from the GInfo portal, then save the file to your computer and connect your device to iTunes (Not supported in version 12.7 or above). http://ginfo.cedd.hksarg/arcgisweb/mobileapps/mobileapps.aspx
(b) Syncing the apps to the IOS-based devices via the iTunes
(ii) Please start the iTunes (you are recommended to update to the latest version ) in your PC, click the icon at the upper left corner of the iTunes, select “File” and then “Add files to Library”, select the files recently downloaded from the GInfo portal.
(c) In your iTunes, go to your device and click the app tab.
(i) Check that the GInfoMap app appears in your list then select the “Install”.(ii) Click sync or “套用”
iTunes 12
http://ginfo.cedd.hksarg/arcgisweb/mobileapps/mobileapps.aspx
-
(d) Configuration of Device Management
(i) Select the “CEDD” developer under the IOS Settings > General > Device Management
(ii) Trust the certificate issued by CEDD Developer.
(e) Turn off “Limit AD Tracking” feature under the IOS Settings > Privacy > Advertising
-
Operation Manual for mobile GInfo (mGInfo) on IOS-based Device The operation is identical for iPhone, iPad mini and iPad
1. Logging in (a) In the 'Login Page', type ‘guest’ as the password and click 'Login' icon to login. (b) In the 'Module Home Page', tap either “GInfoMap”, “Landslip Warning System” or “Enhanced
ILIS” to start the mGInfo. 'Login Page' 'Module Home Page'
Tap to run the App Modules
Remarks: Only some key operations/functions are given in this operation manual. Users are encouraged to explore the full functionalities through practical usage. Any feedback/suggestions/ comments are very welcomed.
-
2. Function keys in GInfoMap module
Use GPS to locate the position of the device To 'Options Page'
Turn on/off layers in the schema
Query Erase selection or graphic layer
Tap here for full extent of map
Tap to expand /close options
To 'Module Home Page'
-
3. Options Page
Tap to select ortho photo, geology map or land lot overlays.
Tap to return to map
Tap to change Base Map Language (Chinese/English)
Tap to select Project Schema
Real Time Image for Granted Users
Tap to select Raingauge overlay
-
4. Options - Overlaps (Ortho Photo, Geological Map and Land Lots) (a) 'Ortho Photo' (b) 'Geological Map'
(c) ' Land Lot'
Tap to return to 'Options Page'
Drag the bar to change the transparency of the overlay
Tap to select Geological Map
Drag the bar to change the transparency of the overlay
Tap to select Land Lot
-
4. Project schema
Tap to select Project Schema
Tap to return to 'Options Page'
-
5. Showing underlying layers in a schema (Default setting only turns the feature layer on)
Tap layer’s name to turn it on/off
-
6. Searching of slopes, street, building, lamp post, lot number and coordinates (English and Chinese is allowed for searching street and building name)
Result:
Tap to query by feature no.
-
7. Selecting feature
Tap and hold until a magnifier appears. The cross indicates the current selection position. Release the tap action and the selection of feature will base on the location of the cross.
-
8. Results of feature selection
Tap to show the feature on map
Tap to show details of the feature
-
9. Landslip Warning System Module
Tap to refresh data
Tap to show other rainstorms-related warnings (e.g. Landslip Warning, Black, Red and Amber Rainstorm Warning, Special announcement on flooding in the Northern New Territories)
-
10. Real-time rainfall
Tap to show the rainfall data in table form
Tap to show the picture in larger format
-
11. Radar and Satellite images
Tap to show the picture in larger format
-
12. Landslip Warning Curve
13. Forecast Rainfall (1-hour and 3-hour forecasts)
-
14. Landslip Warning Status
Consultation, Alert and Landslip Warning Level will appear depending on the rainfall and predicted number of landslides
Check whether cancellation criteria have been met (after issue of Landslip Warning)
Date and time of the rainfall data fetched
Forecast rainfall from HKO
Highest 24 hours rainfall will appear first
Tap to show more details of rainfall level for raingauge locations
-
15. Natural Terrain Landslip Alert
Zonation for computing natural terrain landslide risks
Forecast based on HKO data on every 12 minutes for each zone
Date and time of the rainfall data fetched
-
16. Enhanced ILIS - Summary Page
Tap to show the reported incidents on map
To Search Incident Page
-
17. Enhanced ILIS - Search Incident Page
Filtering criteria
Tap to start searching landslides based on filtering criteria
Filtering result, tap to get details of landslide
-
18. Enhanced ILIS - Map Page
Use GPS to locate the position of the device
Tap here for full extent of map
Tap to identify landslide record
Turn on/off layers in the schema
Query Tap to expand /close options
Erase selection or graphic layer
Raingauge and LandLot Options
Switch Languages
-
19. Identify landslide on map
Tap to get incident details
-
20. Details of selected landslide
Show the selected Incident on map
Tap to view the related documents & photos
Tap to view the inspection details