Preparation

1. Requirements of first connect to the network:

The camera and cell phone / tablet must be connected to the same wireless router.

2. APP for cell phone / tablet: "Yes iCam" APP (application).

Connection diagram:

camera Router Cell phone / Tablet

Installing "Yes iCam"

Search "Yes iCam" in the Google Market and Apple Market and download and install it in the cell

phone / tablet.

(Do not be started after the first installation is complete).

Installing the camera

Camera access 6V power supply, wait about 15 seconds, the power light flashes red and green

alternately.

Connect to the network

3.1 Openning the Wi-Fi option in the phone / tablet to find and connect "sbt-ipcam- XX: XX: XX: XX:

XX: XX" (MAC refer to the actual subject).

  Entering the password "12345678."

3.2 Start "Yes iCam", automatically enter “wireless network settings”, click the router that the camera will

be connected to, enter the router password and wait for about 30 seconds (if the camera can access

to the Internet).That power indicator turns green indicates connection completed

3.3 After program loading is completed, the screen automatically jump to the “camera list”, and then

camera will be online.

ResettingAfter Energized 10 seconds, press reset button about ten seconds and then let go, a tone (beep beep)

will be heard, Resetting will be completed until the indicator light flashes red and green alternately.