Inspection and Testing Services - Bunzl · Inspection and Testing Services Nata Accreditation for...
2
reliable professional achievable Is Your Equipment Certified as Safe? Let us take the worry and stress out of keeping up to date with equipment testing and certifications. At Robertsons, we have been inspecting and servicing lifting and height safety equipment since 1972. We have proven systems and procedures which helps take the responsibility away from our clients and places that on Robertsons as the specialist provider. Our full range of testing services include: • Onsite inspections of lifting and height safety equipment • NATA testing in-house and onsite • Wire rope non-destructive testing • Equipment repairs and service work Each Robertsons branch is equipped with NATA accredited repair and test laboratories certified to ISO 17025 for maintaining lifting and safety equipment. All equipment repaired and tested in our laboratories is issued with a certificate and logged into our electronic Asset Management database (which clients can also access). Why Use Robertsons? • Trained and experienced testing officers • NATA accredited testing and repair laboratories • 24/7call out service available • Technical back-up and support • On-site inspection tags, charts and guides for easy identification • Registers and certificates provided for all work completed • Competitive rates • Access to web based electronic registers BRISBANE STH | BRISBANE NTH | GOLD COAST | TOOWOOMBA | MACKAY | GLADSTONE | SYDNEY | NEWCASTLE | MUSWELLBROOK | MELBOURNE | DANDENONG | PERTH | KALGOORLIE Call 1300 977 577 | lifting.com.au Inspection and Testing Services Our fully trained and experienced testing officers will come to your site to inspect and test equipment where possible. Inspection Charts and Guides are supplied to instantly identify if equipment being used is “in inspection”. Our branches have NATA certified testing facilities to 1,000 tonnes capacity.
Transcript of Inspection and Testing Services - Bunzl · Inspection and Testing Services Nata Accreditation for...
reliable professional achievable
Is Your Equipment Certified as Safe?
Let us take the worry and stress out of keeping up to date with equipment testing and certifications.
At Robertsons, we have been inspecting and servicing lifting and height safety equipment since 1972.
We have proven systems and procedures which helps take the responsibility away from our clients and places that on Robertsons as the specialist provider.
Our full range of testingservices include:
• Onsite inspections of lifting and height safety equipment • NATA testing in-house and onsite • Wire rope non-destructive testing• Equipment repairs and service work
Each Robertsons branch is equipped with NATA accredited repair and test laboratories certified to ISO 17025 for maintaining lifting and safety equipment. All equipment repaired and tested in our laboratories is issued with a certificate and logged into our electronic Asset Management database (which clients can also access).
Why Use Robertsons?
• Trained and experienced testing officers • NATA accredited testing and repair laboratories• 24/7call out service available • Technical back-up and support • On-site inspection tags, charts and guides for easy identification • Registers and certificates provided for all work completed • Competitive rates • Access to web based electronic registers
BRISBANE STH | BRISBANE NTH | GOLD COAST | TOOWOOMBA | MACKAY | GLADSTONE | SYDNEY | NEWCASTLE | MUSWELLBROOK | MELBOURNE | DANDENONG | PERTH | KALGOORLIE
Call 1300 977 577 | lifting.com.au
Inspection andTesting Services
Our fully trained and experienced testing officers will come to your site to inspect and test equipment where possible.
Inspection Charts and Guides are supplied to instantly identifyif equipment being used is “in inspection”.
Our branches have NATA certified testing facilities to 1,000 tonnes capacity.
Customers can access schedules when testing is due, aswell as view test reports and certificates.
Proof load and non-destructive wire rope testing services are available within our branches.
reliable professional achievable
BRISBANE SOUTH 4 Burchill St Loganholme, Qld 4129 P 07 3801 0811 F 07 3209 6325BRISBANE NORTH 5 Johnstone Rd Brendale, Qld 4500 P 07 3881 1445 F 07 3881 2662GOLD COAST 39 Dover Dve Burleigh Heads, Qld 4220 P 07 5535 8277 F 07 5535 8366TOOWOOMBA 345 Taylor St Toowoomba, Qld 4350 P 07 4634 6566 F 07 4634 6533SYDNEY 50 Skarratt St Silverwater, NSW 2128 P 02 9748 3044 F 02 9648 4120NEWCASTLE 33 Firebrick Dve Thornton NSW 2322 P 02 4966 8622 F 02 4966 8611MUSWELLBROOK 49 Thomas Mitchell Dve M’brook NSW P 02 6541 5100 F 02 6543 3233
MACKAY 179 Boundary Rd Paget, Qld 4740 P 07 4952 5520 F 07 4952 5545 GLADSTONE 4 Tranberg St Gladstone, Qld 4680 P 07 4972 6511 F 07 4972 6899MELBOURNE 4/28-30 Little Boundary Rd, Laverton Nth Vic P 03 9315 1520 F 03 9315 1540DANDENONG 28 Swift Way Dandenong South, Vic 3175 P 03 9768 3244 F 03 9768 3422PERTH 16-18 Kewdale Rd Welshpool, WA 6106 P 08 9451 1522 F 08 9451 1533KALGOORLIE 149 Boulder Rd, West Kalgoorlie, WA 6430 P 08 9021 3484 F 08 9021 5491
Call 1300 977 577 | lifting.com.au
Inspection andTesting Services
Nata Accreditation for Added Assurance
Our NATA accreditation ensures our customers that all lifting equipment tested by Robertsons is in accordance with the relevant Australian Standards. Our accreditation covers our in-house and mobile proof load testing machines as well as our wire rope non destructive testing services.
Lifting Equipment Repairs and Service
Our experienced technical officers can service your equipment and where necessary repair items in question. Repairs of chain slings, chain blocks, lever hoists, creeperwinches and plate clamps can be undertaken in most locations. All equipment repaired and tested in our laboratories is also issued with a certificate and logged into our electronic Asset Management Database.
Online Access to LiftingEquipment Register
View inspections and testing due by location.
Print reports, certificates or asset lists from work already completed.
Extract details in Excel spreadsheet format so the data can be sorted or used to complete and record internal inspections.
View and reprint NATA test certificates traceable via a number of ways such as: ID Number, Asset Number, Location or Description.
