INolux 5050 RGB LED 4-Pin With Integrated IC IN-PI554FCHinolux-corp.com/datasheet/SMDLED/Addressable...

5050 RGB LED 4-Pin With Integrated IC

IN-PI554FCH

Official Product IN Part No. IN-PI554FCH Customer Part No. Data Sheet No. Preliminary Product **************** **************** IN-PI554FCH

Specifications are subject to change without notice. Data and drawings herein are copyrighted. July. 31, 2019 Version of 2.4 /19

INolux 5050 RGB LED

4-Pin With Integrated IC IN-PI554FCH


IN-PI554FCH



DISCLAIMER ......................................................................................................................................... 3

PRODUCT SPECIFICATIONS ............................................................................................................. 4

ATTENTION: ELECTROSTATIC DISCHARGE (ESD) PROTECTION ................................................ 4

LABEL SPECIFICATIONS ................................................................................................................... 5

FEATURES .............................................................................................................................................. 6

LED CHARACTERISTICS ........................................................................................................... 7 RECOMMENDED OPERATING RANGES ....................................................................................... 7 SWITCHING CHARACTERISTICS ................................................................................................. 8 PACKAGE OUTLINE DIMENSION & PIN CONFIGURATION .............................................................. 9 PIN DESCRIPTION .................................................................................................................... 9 ABSOLUTE MAXIMUM RATINGS ............................................................................................... 10 FUNCTIONAL DESCRIPTION ..................................................................................................... 10 TIMING WAVEFORMS ............................................................................................................... 11 CONSTANT CURRENT CHARACTERISTIC ................................................................................... 13 TYPICAL APPLICATION CIRCUIT DIAGRAM ................................................................................. 14 LED PERFORMANCE GRAPH .................................................................................................. 15

PRECAUTIONS .................................................................................................................................... 16

REVISION HISTORY .......................................................................................................................... 19


IN-PI554FCH



DISCLAIMER INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design. INOLUX does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY

INOLUX’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of INOLUX or INOLUX CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.


IN-PI554FCH



Product Specifications Specification Material Quantity

Iv Red ：550mcd typ.

Green ：1250mcd typ.

Blue ：300mcd typ.

@12mA/ Ta= 25°C; Tolerance ±10%

λD Red ：624nm typ.

Green ：524nm typ.

Blue ：466nm typ.

@12mA/ Ta= 25° C; Tolerance ± 0.5nm

Vf Red ：1.8-2.2 V

Green ：2.8-3.2 V

Blue ：2.8-3.2 V

@12mA/ Ta= 25°C; Tolerance ± 0.05V

Resin Clear Epoxy Resin

Carrier tape EIA 481-1A specs Conductive black tape

Reel EIA 481-1A specs Conductive black 1000pc/reel

Label IN standard Paper

Packing bag 220x240mm Aluminum laminated bag/ no-zipper One reel per bag

Carton IN standard Paper Non-specified

Others:

Each immediate box consists of 5 reels. The 5 reels may not necessarily have the same lot number or the same bin

combinations of Iv, λD and Vf. Each reel has a label identifying its specification; the immediate box consists of a product

label as well.

ATTENTION: Electrostatic Discharge (ESD) protection

The symbol to the left denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based

chips is necessary even though they are relatively safe in the presence of low static-electric discharge. Parts

built with AlInGaP, GaN, or/and InGaN based chips are STATIC SENSITIVE devices. ESD precaution must

be taken during design and assembly.

If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process.


IN-PI554FCH



Label Specifications

▓ INolux P/N: I N - P I 5 5 4 F C H - X X X X

Product Package Color Customer Code IN:

INolux Corporation

PI55:

5.0 (L) x 5.0 (W) x1.6 (H) mm

4:

4-Pin Version

FCH:

Full Color

XXXX:

Customer Specific Code


IN-PI554FCH



Features 1. 5050 with integrated high quality constant current IC and RGB LED chip.

2. Built-in IC, with high precision of constant current and internal RGB chips spectral processing in advance. 3. Single line data transmission（return to zero code）.

4. Specific Shaping Transmit Technology - number of LED stacked is not restricted.

5. Cascading Enhancement Technology - any 2 LED spacing can be up to 10 meters

6. Data transfer rate of 800 kbp/s at 30 frames per second.

7. RGB output port PWM control can achieve 256 grey level adjustments

9. Upon powering up, IC performs self-inspection then lights connection on the pin B lamp.

10. SA-I Anti-interference patent technology for single line data transmission.

11. Built-in power supply reverse connect protection module, reversed power input will not damage the IC.


IN-PI554FCH



LED Characteristics (Ta=-25oC, unless otherwise specified)

Light color

Wavelength（nm） Light intensity（mcd）

Working current（mA） Working voltage（V）

R 620-625 400-700 12 1.8-2.2

G 520-525 1000-1500 12 2.8-3.2

B 465-470 200-400 12 2.8-3.2

Recommended Operating Ranges (Ta=-25oC, unless otherwise specified)

Parameter Symbol Min. Typ. Max Unit Test conditions

Supply voltage VDD - 5.2 - V -

R/G/B port pressure Vds,max - - 26 V -

DOUT drive capability IDOH - 49 - mA maximum source current

DOUT drive capability IDOL - -50 - mA maximum sink current

High level input voltage VIH 3.4 - V VDD=5.0V

Low level input voltage VIL - - 1.6 V VDD=5.0V

The frequency of PWM FPWM - 1.2 - KHZ -

Static power consumption IDD - 1 - mA -


IN-PI554FCH



Switching Characteristics (Ta=-25oC, unless otherwise specified)

Parameter Symbol Min. Typ. Max Unit Test conditions

The speed of data transmission FDIN - 800 - KHZ

DOUT transmission delay TPLH - - 500 ns

DIN→DOUT TRPHL - - 500 ns

IOUT Rise/Drop Time Tr - 100 - ns

VDS=1.5 IOUT=13mA Tf - 100 - ns


IN-PI554FCH



Package Outline Dimension & Pin Configuration Outline Dim.

Pin Configuration

Soldering terminals may shift in the x, y direction. Unit: mm Tolerance: +/-0.1mm

PIN Description Number Symbol Function Description

1 VSS Ground

2 DIN Display data cascaded input (800k bps)

3 VDD LED and Logic Power Supply

4 DO Display data cascaded output (800k bps)


IN-PI554FCH



Absolute Maximum Ratings (Ta = 25 oC, Vss=0V, unless otherwise specified)

Parameter Symbol Range Unit

Logic supply voltage VDD +3.5～+5.5 V

Logic input voltage VIN VDD+0.5 V

Operating temperature TOPT −45 to +85 °C

Storage temperature TSTG −50 to +150 °C

ESD pressure VESD 4K V

Functional Description The IN-PI554FCH sends signals in return to zero codes with a single-wire communication method.

When the power-on reset is completed, the IN-PI554FCH receives the data from the DIN pin.

When all the 24 bits of data have been received, IC no longer receive data, the DOUT port starts to forward the data to

the next chip as its input data. The DOUT pin is held LOW before the data forwarding. The three PWM output ports,

OUTR, OUTG and OUTB, drive Duty ratio output in a 0.6-ms period corresponding to the 24-bit data received

before.If the input data from the DIN pin is a RESET code, the IN-PI554FCH will drive the newest received 24-bit

data for display. When the reset code is completed, the IN-PI554FCH will start receive the new 24-bit data. When 24

bits of data have been received, the IN-PI554FCH will forward the data through the DOUT pin. Before the RESET

signal is received, the output at the OUTR, OUTG and OUTB pins will remain unchanged. When a low level RESET

code longer than 80μs is received, the IN-PI554FCH will drive Duty ratio output corresponding to the newest 24-bit

data received The IN-PI554FCH employs an automatic shaping-forwarding technique, so the number of the cascaded

chips is not limited by the signal transfer, and is only limited by the panel refresh speed. For example, in a 1024-chip cascaded design with the panel refresh time of 1024X3X8 X 1.25（us）=30ms, no flickering will appear.


IN-PI554FCH



Timing Waveforms 1. Input Code

2. The data transmission time (TH+TL=1.25µs±600ns):

Name Description Typ. value error

T0H 0 code，high level time 0.3µs ±0.15µs

T1H 1 code，high level time 0.6µs ±0.15µs

T0L 0 code，low level time 0.9µs ±0.15µs

T1L 1 code，low level time 0.6µs ±0.15µs

Reset Reset code，low level time 80µs

3. Connection Scheme


IN-PI554FCH



4. Data Transfer Format

5. 24-bit data format

G7 G6 G5 G4 G3 G2 G1 G0 R7 R6 R5 R4 R3 R2 R1 R0 B7 B6 B5 B4 B3 B2 B1 B0

Note: The data is sent in the sequence of GRB, and the MSB is sent first.


IN-PI554FCH



Constant Current Characteristic With excellent constant current characteristics,

(1) The differences of current between Channel is less than ±1.5℅

(2) The differences of current between Chip is less than ±3℅

(3) When the voltage of the load change, the output current is not affected, as shown in the figure below

(4) Below output port of the current Iout and add on the port voltage Vds curve relationship.

The smaller the Iout current, the smaller in the condition of constant current need of Vds.


IN-PI554FCH



Typical Application circuit diagram


IN-PI554FCH



LED Performance Graph


IN-PI554FCH



Precautions Please read the following notes before using the product: 1. Storage 1.1 Do not open moisture proof bag before the products are ready to use. 1.2 Before opening the package, the LEDs should be kept at 30℃ or less and 80%RH or less.

1.3 The LEDs should be used within a year.

1.4 After opening the package, the remaining LEDs should be kept in a resealed bag.

1.5 The LEDs require mandatory baking before usage. Baking treatment listed below.

1.6 If the moisture adsorbent material has fabled away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

*Baking treatment: 60±5℃ for24 hours.


IN-PI554FCH



2. Soldering Condition Recommended soldering conditions:

Profile Feature Lead-Free Solder

Average Ramp-Up Rate (Ts max to Tp ) 3℃/second max.

Preheat: Temperature Min (Ts min) 150℃

Preheat: Temperature Min (Ts max) 200℃

Preheat: Time ( ts min to ts max ) 60-180 seconds

Time Maintained Above: Temperature (TL) 217 ℃

Time Maintained Above: Time (t L) 60-150 seconds

Peak/Classification Temperature (T P) 240 ℃

Time Within 5℃ of Actual Peak Temperature ( tp) <10 seconds

Ramp-Down Rate 6℃/second max.

Time 25 ℃ to Peak Temperature <6 minutes max.

Note: Excessive soldering temperature and / or time might result in deformation of the LED

lens or catastrophic failure of the LED.


IN-PI554FCH



3. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more

intervals, and do soldering of each terminal. Be careful because the damage of the product is

often started at the time of the hand solder.

4. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,

a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

5. Caution in ESD Static Electricity and surge damages the LED. It is recommended to use a wristband or anti-

electrostatic glove when handling the LED. All devices, equipment and machinery must be

properly grounded.


IN-PI554FCH



Revision History Changes since last revision Page Version No. Revision Date

Initial release - 1.0 12-21-2015

Update optical electrical characteristics 2.0 06-10-2016

Update data transmission time / intensity level/ handling 2.1 10-20-2016

Update intensity level 2.2 10-31-2016

Update intensity level 2.3 01-07-2019

Revise the drawing; revise the precaution. 14, 16 2.4 07-31-2019

INolux 5050 RGB LED 4-Pin With Integrated IC IN-PI554FCHinolux-corp.com/datasheet/SMDLED/Addressable...

Documents

Transcript of INolux 5050 RGB LED 4-Pin With Integrated IC IN-PI554FCHinolux-corp.com/datasheet/SMDLED/Addressable...