esseyepro.com© 2013 Eye Safety Systems, a subsidiary of Oakley, Inc. All rights reserved. This product may be covered by one or more U.S. patents, as found on www.esseyepro.com/patents. (06-28-13)

KEY FEATURES All goggle components are extremely heat resistant

1-piece wrap-around Nomex® strap system with Velcro tabs

Advanced ESS ClearZoneTM FlowCoat lenses eliminate fog inside & prevent scratches outside

Full-perimeter ventilation & filtration system minimizes lens fogging & filters smoke & airborne particles

Patented Speed-ClipTM system facilitates quick strap adjustment

Interchangeable 2.6mm high-impact Polycarbonate lenses

Distortion-free optics & 100% UVA/UVB protection

Roomy frame fits over most prescription eyewear

AVAILABLE CONFIGURATIONS Innerzone 3TM Kit: Includes Frame w/ 1-Piece Strap & Clear Lens

Innerzone 3 (Gray) Model: #740-0273

PRODUCT DESCRIPTIONThe ESS Innerzone 3TM features a wrap-around strap system that

secures with two Velcro tabs to any type of helmet. This system

allows the goggles to be stowed on the front of a helmet. The patented

Speed-ClipTM strap system facilitates quick strap adjustment, even

with gloves on.

The Innerzone 3TM is compliant with U.S. Federal OSHA, ANSI Z87.1+,

and NFPA 1971-2007, including the 500°F for 5-minute oven test.

BALLISTIC PROTECTION STANDARDSCompliant With: NFPA 1971-2007 Edition, ANSI Z87.1-2010,

CE EN 166, U.S. Federal OSHA

COLORSFrame: Gray

Available Lens Colors: Clear

INNERZONE 3TM

NFPA 1971 COMPLIANT STRUCTURAL GOGGLE WITH WRAP-AROUND STRAP

ESS® (Eye Safety Systems) P.O. Box 1017, Sun Valley, ID 83353 USA

+1.208.726.4072 | +1.208.726.4563 (Fax) www.esseyepro.com | facebook.com/esseyepro | twitter: @esseyepro ess@esseyepro.com

INNERZONE 3TM FEATURES

INNERZONE 3TM PRODUCT DETAIL

Nomex® HeatSleeveTM

Optional protection for goggle & lens, guards against

scratches & heat

Wrap-around Strap System

Secures with two Velcro® tabs to any type of helmet and allows goggles to be stowed on

the front of a helmet

PPE ComplianceThe Innerzone 3TM is compliant

with U.S. Federal OSHA,ANSI Z87.1+, CE EN 166,

and NFPA 1971-2007, including the 500°F for

5-minute oven test

ESS ProtectionESS’ extra-thick Polycarbonate lenses resist impacts—in this case blasts from a 12-gauge shotgun firing #6-shot from

10 meters—dimpling but not penetrating the lenses

Roomy Frame FitsOver Most

Prescription Eyewear

Full-perimeter Ventilation &

Filtration System

Patented Speed-ClipTM System For Quick Strap Adjustment

Advanced ClearZoneTM FlowCoat Anti-fog & Anti-scratch Lens

Coatings