Inlays/Onlays/Full Coverage Preparation KitAnterior Veneer Preparation KitDr. Ken A. Neuman

Technique Guide

C o n s i s t e n t l y. Rationally. Sy s t e m a t i c a l l y.

Buy Direct. Buy Brasseler USA.

US No.

Order No.

LVS4

6844

014

LVS1

834

0 21

LVS2

834

016

8392

016Size Ø 1/10 m m

10 . 0

LVS3

6844

016

10 . 06 . 06 . 05 . 0L mm

0 . 50 . 3Depth cut

Anterior Veneer Preparation KitFriction Grip 31 —Ø1.60mm x 19mm L

357.31.620

Developed by Dr. Ken A. Neuman

Anterior Veneer Preparation Kit

The Anterior Veneer Prep Kit as designed by Dr. Ken Neuman contains five diamond instruments. If one follows the very simplesequence an ideal anterior veneer preparation is easily produced.

The Brasseler USA 834-021 and 016diamond burs will quickly provide depthcuts of 0.5 and 0.3 mm respectively.

To properly prepare the “elbow” areas onveneers, turn the Brasseler USA 6844-014 or 16on its end. This bur can also be used for theincisal wrap on veneers, as the gold tip is theideal shape for this part of the preparation.

Fig. 1

Fig. 4

Fig. 3

The Brasseler USA 6844-014 and 016 twogrit diamonds are used for main shaping of the veneer preparation. Simply smoothout the ridges made by the depth cuttersand you automatically have reduced thedesired amount. The gold tip on this bur issmoother than the body of the bur and isideally suited for a consistent preparationof the gingival area.

Fig. 2

The Brasseler USA 8392-016 “mosquito” shaped micro diamondbur is ideal for trimming excess material from the margins andfor smoothing the gingival areas on temporaries.

Anterior Veneer Preparation Kit

Inlays/Onlays/Full Coverage Preparation Kit

Technique Sequence

The inlay, onlay anterior and posterior full crown coverage kit according to Dr. Ken Neuman is designed for optimal preparation ofi n l a y , onlay and full crown restorations. The kit is very simple to use, and when the suggested sequence is followed leads to a veryaccurate preparation design in an efficient manner.

The Brasseler USA 845KR-018 round endedbucket shaped diamond is used to shape theisthmus at the proper angulation on bicuspids,and molars when you wish a smaller isthmusopening. This bur can also be used to shoe thecusps quickly and easily for esthetic restorations.

Fig. 1

The Brasseler USA 849L-009 bur is suited forbreaking contacts and for use to shape the proximalareas where you do not have a lot of space.

Fig. 2

The Brasseler USA 845KR-025 bur is used for molars where the preparation has a larger isthmus width. It can also beused for shoeing cusps by laying it flat at the desired angulation.

Fig. 3

The Brasseler USA 846KR-016 diamond bur is used to set the angulation for proximal contact areas and is also used toshape the lingual/palatal portion of onlay or 3⁄4 crowns preparation.

Fig. 5

Fig. 4

Fig. 6

To order call 8 0 0 . 8 4 1 . 4 5 2 2, fax 8 8 8 . 6 1 0 . 1 9 3 7 , or visit our web site: w w w. b r a s s e l e r u s a . c o m

H i n tThe Brasseler USA Crown Removal Kit 116.31 is ideal for the removalof obsolete restoration when preparing anterior or posterior teeth.

Full Coverage Crowns

The Brasseler USA 5850-016 and 018 diamondburs are used to accentuate the margins forall ceramic restorations. The round ended tipprovides the ideal shape for marginal areas. It is also ideal to break through contact areasand to reduce the incisal areas on anteriorteeth. Using the Brasseler USA 5850-018 tocreate depth cuts for full coverage providesthe proper amount of reduction for estheticr e s t o r a t i o n s .

The Brasseler USA 10839-012 and 014 (endcutting) diamonds were designed to protectthe soft tissue and can be used for finishinggingival margins on all restorations. The tipdesign makes these instruments ideal forslight subgingival use without creating anybleeding. The non-cutting surface on theside of the bur allows the operator to usethese instruments without fear of damage to adjacent teeth.

Fig. 7 Fig. 9

The Brasseler USA 5368-023 footballdiamond bur is used to shape thelingual/palatal areas from the incisaledge to the cingulum.

Fig. 8

US No.

Order No. 10839

014

10839

012

5368

0 23

5850

018Size Ø 1/10 m m

--5 . 010 . 0

5850

016

846KR

016

845KR

0 25

849L

0 0 9

10 . 06 . 04 . 05 . 0

845KR

018

330

H7

0 0 8

4 . 01 . 6L mm

Inlays/Onlays/Full Coverage Preparation KitFriction Grip 31 —Ø1.60mm x 19mm L

358.31.620

Developed by Dr. Ken A. Neuman

Inlays/Onlays/Full Coverage Preparation Kit