Initial Spares planning & Procurement - Petro1content.petro1.com.my/coursepdf/Effective...
-
Upload
vuongkhanh -
Category
Documents
-
view
288 -
download
1
Transcript of Initial Spares planning & Procurement - Petro1content.petro1.com.my/coursepdf/Effective...
Initial Spares planning & Procurement 31st October – 1st November 2016 – Perth, Australia
16 Point Action Plan: Optimizing
Maintenance Spares Inventories 2nd – 4th November 2016 – Perth, Australia
Initial planning, procurement, cataloguing & inventory reduction
Media Partners:
www.petro1.com.my
Separate Bookable
session
13th Run in APAC!
Previous clients attended: Nestle Manufacturing, KPOC , HESS INDONESIA, Thai Aviation services, San Roque Power, HMC Polymers, NGHI SON REFINERY AND PETROCHEMICAL, STAR ENERGY, VICO
INDONESIA, NIPPON , TNB , BRUNEI LNG , SARAWAK ENERGY , CARIGALI-PTTEPI , SHELL CHEMIAL SERAYA , GLOW ENERGY , MURPHY SARAWAK ,CARIGALI HESS , PETRONAS
GAS ,STAR PETROLEUM, PTTEP SIAM , VINYTHAI , THAIOIL , MUDABALA PETROLEUM , PTT LNG , SIAM YAMATO STEEL, PTT E&P , PETROFAC , SARAWAK SHELL BERHAD, , PT
BADAK NGL , TALISMAN , HESS INDONESIA , TRANS-THAI MALAYSIA , BINH SON REFINING AND PETROCHEMICAL , TOTAL E&P , SINGAPORE REFINING COMPANY, PT CABOT,
SWIRE PACIFIC OFFSHORE, UMW Offshore Drilling, MAERSK, MODEC, SAPAURA KENCANA and SHELL.
Reduce stock
levels, Spares cost
and stocking
costs
Comments from past participants:
“The topics covered from this course are very relevant for me to perform my
daily job, which will serve better foundation whenever I want to challenge
my users and suppliers.”
REPSOL (Malaysia)
“Very good workshop with experienced trainer.”
VICO (Indonesia)
“These programmes enable us to learn more details on Spares
inventories”
PETRONAS GAS BERHAD ( Malaysia)
“Good example of spares management, concepts and techniques
used for optimization of spares”
SHELL CHEMICAL SERAYA (Singapore)
“Good course “
MUBADALA PETROLEUM, (Thailand)
“We found that our stock control was very poor and we have
adopted different strategies depending on cost and usage.”
Middle East Gas Producer
“We didn’t realise we were significantly overstocking until we
applied the techniques we learnt on your course.”
Major Beverage Producer
“The content are helpful and can be applied to the works for the
improvement on inventory and cost”
Binh Son Refining (Vietnam)
“Thank you, the man with full of experience.”
BOB PT BUMI (Indonesia)
“The training is very good”
PT CABOT ( Indonesia)
“Interesting topic, especially for people who work for material
planning”
TOTAL E&P (Indonesia)
“Facilitator is knowledgeable on this subject “
Sarawak Shell Berhad, (Malaysia)
“We didn’t know there was any science in setting reorder levels,
we have always used guess work, we feel we have an important
role in the company asset management programme. “
“This course is useful for our Inventory Management”
Nghi Son Refining (Vietnam)
Initial spares planning &
procurement
(31st October – 1st November
2016)
How to improve the effectiveness of the initial spares planning process for new equipment, the benefits more costs effective purchasing of initial spares to minimize costs and the number of items purchased. The covers the process from initial specification through to handover to the operations phase of the life cycle.
16 point of action: Optimizing
Maintenance Spares Inventories
(2md – 4th November 2016)
Use Successful methods and analysis techniques to effectively reduce inventory
and costs of spares part.
Effective Spares Management (5 Days)
(
Program Overview
This training course is designed for:
Maintenance Managers, Engineers,
CMMS super users
Warehouse Managers & Supervisors
Project Engineers
Spares & Inventory Personnel
Purchasing & Logistics Previous Attended Job-titles: Engineering executive, Material Analyst, Material & Inventory Management, Project
Delivery, Maintenance planners.
This program is intended
Early Project Stage: spare parts planning & procurement for New
Equipment (2 Days)
( This 2 day workshop is new and focuses on the important activity of purchasing spares during the project phase. The
workshop will provide the delegates with best practices and processes related to the planning and procurement of
initial spares. This activity is usually done badly, resulting in duplication of stock, poor cataloguing, under or over
stocking and poor ordering rationalisation.
Initial spares planning starts in the design phase with equipment specifications and the request for recommended
spares parts list, until the items are handed-over to the warehouse and the items set-up in the CMMS. ISO55000
stipulates we have to demonstrate that all assets are effectively managed from cradle to grave, then initial spares
planning and procurement process is an important element of asset management.
The course will focus on:
The responsibilities of who does what and the timing, who buys the company or the EPC contractor and this will
cover commissioning & start up spares, 2 year spares and insurance spares.
Achieving rationalisation in the initial spares phase by creating a master recommended spares part database (RSPL)
e.g. rather than purchase RSPL spares by each RSPL, we need to leverage grouping common items.
The need to build into the design phase standardization in order to reduce the variability of item purchased.
Attend this course to Master:
What is required under ISO55000 to manage the initial spares procurement process
Why existing RSPL/SPIR forms are ineffective
How to rationalize initial spares procurement using MS Access
How to challenge vendors 2 years spares recommendation and then to specify inventory parameters
The importance of assigning a spares criticality as this influences the selected desired service level
How to select the right stocking strategies to minimize stock holding
How to justify the financial case for high value spares
Understand basic MS Access functionality that can be applied to the SPRL or SPIR master tracking & build Tool.
Unique features of this training: Having the ability to implement immediately the techniques learned once you are back at your workplace is crucial for
every participant. During the 2 days training, practical involvement and exercises will be shared.
Discuss delegate’s issues with the initial spares process.
Develop a process map (using post-Its) to cover specification, RSPLs, purchase, receiving, preservation, handover.
Building automatically an equipment BOM.
Converting vendors RSPL quantities into inventory control parameters.
Reviewing RSPL procedures and formats and developing the ideal electronic RSPL.
Topic 1 Common Issues with the Initial Spares
Delegates state their issues in this process
Common issues found in the process and industrial sectors, e.g. as lack of effective procedures, poor
specifications, purchasing duplicates,
The above will be supported by examples/case studies collected through numerous audits and upgrade
projects.
Discussion on stocking objectives
Topic 2 Initial Spares Planning & Procurement Process
Review of the spares planning & procurement process categorize in 12 main phase.
Delegates should understand their company’s process so that areas of opportunity can be identified
Group exercise to develop a process map (using post-Its) to cover specification, RSPLs, purchase, receiving,
preservation, handover
Documents required to support the Strategic Asset Management Plan (SAMP) for initial spares. A SAMP is a
key term within the new ISO55000 standard.
Topic 3 Effective Recommended Spare Parts List (RSPL) from Vendors
SPIRs, their purpose and why they are submitted incorrectly, principles of good spares cataloguing to
ensure zero duplicates, and ease of searching
A critical review of a typical RSPL form known as a SPIR (Spare Parts Interchangeability Record and
associated procedures sent to vendors. We have developed 11 review rules.
Examples of good and bad RSPL/SPIR
Proposed improved format for the electronic RSPL/SPIR that facilitates migrating to a database.
Topic 4 Building an effective spares catalogue
Introduction to ISO55000 and the requirements for initial spares
Key features of cataloguing including the selection vendor, i.e. OEM, original vendor or to select an
alternative vendor
An introduction to our 8 step cataloguing process, and a detailed treatment of each step, including:
Naming formats,
Developing part type guides to ensure naming consistency
Defining rules when vendors utilise different specification formats,
Defining strategies for purchasing common items and to understand the scope of your maintenance
strategy as this influences parts stocked,
Documenting the cataloguing process with all the defined rules and decisions
Building the spares catalogue and conducting quality checks
Creating CMMS migration upload files
Initials spare parts planning & procurement (2 Days)
(
Topic 5 Deciding Whether to Stock
The questions to be answered to decide whether to stock or not
Criticality definitions (vita, essential, desirable and non--critical)
Different approaches to aid the decisions including a simple decision diagrams for slow moving spares
Maintainability FMEA
Topic 6 How to Challenge Vendors Recommended 2 Year Quantities
Introduction to reliability principles, probability distributions and the bath tub curve and its influence on
spares demand
Risk and the Poisson distribution
How to estimate annual demand rates (ADR) from populations or generic data sources using a formulae
requiring populations, MTBF, Utilisation Factor
Exercise to support understanding
Topic 7 Converting Annual Demand Rates to Inventory Control Parameters
The ROP inventory model and definitions of the metrics used
11 formulas for the key metrics including ROP, Safety Stock, Average Stock Levels and Values. EOQs, etc.
How to use the estimated ADR to establish the CMMS parameters (defined above)
Exercises using the Excel Calculation Worksheet designed to support inventory parameters using
populations & MTBFs as well as Bulk items
Topic 8 Creating Additional CMMS Spares Data
Spares class and sub class
Type codes
Spares attributes & purchase descriptions
Cost & Demand Codes including the ABC classification,
Item cost including transport costs
UoM
Topic 9 Building the SPIR Build & Tracking Tool
Introduction to database solutions, what is the functionality requirements
How MS Access can provide a useful tool to support the RSPL/SPIR process
Overview of the RSPL Database tool including the structure and how data is importing
Identifying duplicates, updating installed populations for duplicated items,
Comparing calculated 2 year quantities to vendor recommended quanties, updating quantities, & the
preferred vendor, printing the pro-forma PR, Exporting to the CMMS for purchasing
Topic 10 Insurance Spares & Their Evaluation
Definition of an insurance spares
What is required to support the decision whether to purchase or not ( penalty costs, repair times, planned
and emergency purchase lead times and costs
Overview of RAM Study Software that allows analysis whether to stock 0, 1 or 2
PETRO1 provides Oil & Gas Trainings & Consultancy services ranging from Petroleum Engineering, Exploration & Production, Subsurface and business
related activities in the oil & gas industry. We had successfully made impact to petroleum professional mainly the Top 50 Oil & gas players in the Asia
Pacific Region.
Total E&P
Petronas
Murphy Oil
JX Nippon
Scomi Oil
Hess
Saipem
Clough
Mubadala Petroleum
Bureau Veritas
Pertamina
Peritus international
Petrofac
Keppel Corporation
Singapore refining Company
Salamander Energy
Binh Son Refining Vietnam
PTT Global
Newfield
Atkins Australasia
Brunei Methanol
Curtin univeristy
Technip
Premier Oil
SGS
PTT EP
Halliburton
Brunei LNG
Shell Chemical
Worley Parson
China university of petroleum Beijing
Thaioil
Aker Solutions
Star Petroleum
Jurong Shipyard
95%
5%
Past delegates rating on the effect on training
Effective Fairly effective
The Course is designed to: Managers
Purchasing & Logistics
Planners
Materials
Project and Design Engineers who have an interest in how to minimize risk and costs of spare part inventories.
Engineers responsible for specifying, buying spares and setting up the spares information in the CMMS.
Anyone who want to reduce Maintenance OpEx.
Previous Attended Job-titles: Inventory Management, Maintenance Department , warehouse , Maintenance mechanical,
Inspection & Data Management, Production , Material , Instrument & Control, Maintenance & Reliability , Buyer , Planner , Store
controller, CMMS coordinator, Supply chain management , Plant Engineer, Equipment Analysis and Central service Manager.
Program Overview
This program is intended
Optimizing Maintenance Spares Inventories – Using a 16 point of action
( Many companies do a bad job at managing their inventory effectively; there are many reasons for this. But it starts with bad submission of SPIRs, cataloguing and selecting initial spares. This practical newly structured 3 day workshop covers every aspect related to reducing inventory and costs of spares parts and is supported by case studies, software and practical exercise to aid understanding. The techniques allow you to immediately apply them in the workplace and start to reduce cost. Initial spares planning and procurement and detailed cataloguing is covered in a separate 2 day workshop. This 3 day workshop focuses on reducing the inventory. This is an area often overlooked. An Excel Analysis worksheet containing all formulae will be provided to conduct an audit of current inventory parameters. With this, participants can then return to their workplace and conduct such an audit and highlight spares where the current ROPs are too high or too low or buying costs are too high or too low. The analysis technique will be based on probability for normal operating and consumable spares, the analysis of insurance spares using simulation (modelling) is covered in the initial spares workshop. A new topic focusing on inventory management auditing will allow delegates to learn about different types of audits and to conduct an inventory management audit so the delegates can evaluate what they have in place with respect to best practices. Delegates are required to bring laptop to conduct the numerous exercises. This course has a new structure designed to focus more to reduce stock levels, spares costs and stocking costs - and provide additional exercises using the optimization techniques in addition to include how to conduct improved CMMS spares cataloguing.
Attend this course to Master:
ISO55000 and what it means for inventory management
How to audit inventory management processes
The different costs associated with spares management
Learn techniques to improve reliability resulting in less spares usage
How to select the right inventory policy for fast and slow moving parts
Good practices related to SPIR forms
How to evaluate safety stocks scientifically
How to determine how many to buy
Learn strategies to minimize stock
How to justify the financial case for high value spares
How to measure inventory performance
What can be done in-house and what can be done with specialist software
PRACTICAL INVOLVEMENT: Delegates will learn about types of audits and to conduct an inventory management audit so the delegates can evaluate what they
have in place with respect to best practices. The audit will be an excel worksheet and provide a quantifiable score so they can compare
themselves
Participant will be involved in how to audit their existing inventory management parameters using a Excel worksheet, this worksheet
will be partly developed before the class which then the class will build upon the worksheet with the trainer guidance. These will provide
the participants better understanding during the building process.
OPTIMZING MAINTENANCE SPARES INVENTORIES
- Using a 16 point action plan - Introduction to spares management
Delegates Issues
Common issues in inventory management with real examples
Where we incur excess costs
Benefits of improved inventory management
Terms and definitions used in the workshop.
Summary case studies showing 70% reduction.
Auditing inventory management
Scope of audits
Overview ISO55000 and Inventory Management
- Sample SAMP ( Take Away)
Process & procedures for effective spares management.
Introduction to auditing and benchmarking
Conducting an inventory practices audit
- This allows delegates to conduct a full audit of their process &
procedures back at their workplace.
When to order (Setting of Re-Order Points, safety stocks
Levels)
Different approaches to set safety stock
Using the Poisson distribution to set re-order points based on lead time, annual usage and criticality and the typical issue quantity
Alternative strategies including Constant Vendor Delivery
Exercise - setting re-order levels using the approximate formula and the Poisson cumulative probability tables
How many to order?
How to determine the economic order quantity using formula and a tabular approach.
The effects of ordering too many or too few,
Evaluating whether discounts are worth accepting for higher quantities
What to do if the EOQ is not practical
Inventory cost reduction programme
A 16 step inventory reduction programme, tactics including
Auditing CMMS Data Quality – Bearing List case study
Key question to challenge whether to stock or not, include use of a decision chart for slow moving parts.
Applying the 80-20 rule to AIV, unit price and stock value including how to determine and migrate the ABBC class to the CMMS.
Identifying duplicates
Internal lead times reduction
Reduce internal lead times
Part Standardization
Different strategies, min-max, reorder point, vendor controlled supply, including exercises
Replace OEM
Spares costs
Different costs used in the stock management process, e.g. buying, holding cost, item cost, issue cost, penalty cost, average stock level costs, annual issue value, standard costs, average costs
Auditing current inventory Parameters
effectiveness
Introduction to 25 inventory formula, use a Excel worksheet to seek opportunities to reduce stock levels and stock holding costs
Metrics include service levels; safety stock. ROP, Average stock levels, No of years of stock, Annual Issues Rates and value, stock holding value all calculated at line item level
Demonstration of an MS Access Based Application to simplify the analysis
Evaluate policies for insurance spares
Planned purchases and emergency purchases
Holding costs and costs of lost production
Introduction to reliability theory
Normal & Poisson distribution,
Calculating Weibull parameters for high value spares
Explanation of service levels what they really mean
Why is the P-F interval important
How to estimate annual usage using MTBFs, population& utilization factors or reliability data sources
Spares Criticality
Four Spares criticality definitions
Criticality and service levels and demand rates
Auditing business process
Reviewing work processes & procedures
Planning the scope of the audit
Conducting an audit
Identifying the issues and corrective actions
Exercise applying the process to the SPIR process from request to spares purchase
KPI Reporting system
Discuss Purchasing & Inventory KPI Using 7 Key result area
What makes a Performance management system
TAKE AWAY MATERIAL
*An innovative Revised SPIR sheet to aid in setting Inventory Management system will be used to
analyze your own spares parts.
* CMMS Inventory Parameter Auditing Tool (Excel) and of course the 16 point Action Plan to Reduce
Inventory & Spares Costs.
Lap top is required.
David Thompson, RAMsoft UK – MAINTENANCE RELIABILITY CONSULTANT
David extensive experience covers all aspects in Maintenance, Reliability and Operation management. His area of strength covers specifically in maintenance management audit reports , RCA , Shutdown planning and failure code systems ,CMMS , KPIs , Spares Optimization , RCM and RAM Modelling
For the past 40 years, David had been actively involved in:
Conducted over 400 audits including fast track audits, in-depth audits and distance audits in maintenance management
Currently working for Worley Parsons in UK writing document for a number of FEED projects worldwide.
Interest in helping companies collect better data and to try and make reliability of interest to the regular maintenance engineer by concentrating on applications rather than complex mathematical theory.
Developed Policy and procedures documents for a number of Oil & Gas Companies.
Wrote standard and guidelines on many topics on maintainability, RCA, work packs, Shutdown planning and failure code systems.
Wrote over 400 audits reports covering excellence in Maintenance management and in specialist topics spares, CMMS, KPIs and Reliability Management system.
Presented Papers at several Maintenance & Reliability Symposiums in Europe, Malaysia and Brazil.
Online distant learning instructor for Robert Gordon University in Assets integrity and Reliability Management.
Undertaking a major CMMS data Cleansing Project as part of a CMMS upgrading.
Symposiums
European & world Maintenance Congress 2007
Applied Reliability Symposiums – Europe 2009, Brazil 2008, Asia 2006,200, 2010.
Presented paper at the Applied Reliability Symposium Singapore 2013 (4th Year)
David has worked for many blue chip companies either directly or through a consulting role.
David,s International Clients : Nippon Oil , Talisman , Petrofac , State Oil Dubai Petroleum , Novartis , EGGBOROUGH POWER STATIONS , Chinese Oil & Gas company ,worley parsons , sabic, Qatar petroleum , Scottish power , wood group , shell Nigeria , Hunstsman , ENI oil , Saudi Aramco and SONANDOL P&P David is a certified instructor in RCA and Reliability Methods and Techniques. He has developed and delivered training programs worldwide including both to offshore and onshore facilities, topics include RCM, FMECA, Weibull Analysis, RAM Modelling, Reliability Growth, Analysis, and Fault Tree Analysis, Incident /Root Cause Analysis, Work Planning and Control, Spares Optimisation & Rationalisation. Recent workshops that have been well received are Achieving CMMS Data Integrity, Implementing Asset Management Systems to support ISO55000 and Reducing OPEX costs. David has presented papers at several Maintenance & Reliability Symposiums in Europe, Malaysia, and Brazil. He is an Online Distant Learning Instructor for the Robert Gordon University for a distance learning MSc Course in Asset Integrity and Reliability Management. David’s workshops include many case studies and examples gaining from working in the Middle East, Africa, and Asia. David has conducted many reliability studies over the past 20 years. He has a particular interest in helping companies collect better data and to try and make reliability of interest to the regular maintenance engineer by concentrating on applications rather than complex mathematical theory. He has worked for many blue chip companies either directly or through consultants. Early days David initially started in the steel making and mining sectors and for the past 15 years in the oil & gas sector. David was the UK partner for Reliasoft one of the world’s leading reliability engineering companies, and is currently part of a team to implement improved Asset Reliability in the Middle East, including RAM and RCM studies.
Principal Program Facilitator
Effective spares
Management
INSPP
Full 2 Days
(31st Oct – 1st Nov))
OMSI
Full 3 Days (2nd – 4th Nov)
2 Days + 3 Days (31st Oct – 4th Nov )
5 Days
Standard Price AUD 2399 AUD 3199 ( ) AUD 4399 ( )
Early Bird Price AUD 1999 AUD 2899 ( ) AUD 3999 ( )
REGISTER 3 AND SENT THE 4TH FREE - Please note that all registrations must be made at the same time to qualify.
- Early Bird Promotion Deadline – 30th Oct 2016
Investment Packages
1. Name:________________________________________________Mr⎕Mrs⎕Ms⎕Dr⎕ Job Title: _______________________________________________________________________ Email : ___________________________________________________________________________ Contact No: ____________________________________________________________________ Department:____________________________________________________________________ 2.Name:________________________________________________Mr⎕Mrs⎕Ms⎕Dr⎕ Job Title: ________________________________________________________________________ Email : ___________________________________________________________________________ Contact No: ____________________________________________________________________ Department:____________________________________________________________________ 3.Name:________________________________________________Mr⎕Mrs⎕Ms⎕Dr⎕ Job Title: ________________________________________________________________________
Email : ___________________________________________________________________________ Contact No: ____________________________________________________________________ Department:____________________________________________
Head of Department:_____________________________________
Invoice Attention to:__________________________________________
Company:____________________________________________________ Industry:_____________________________________________________ Address:_____________________________________________________
Postcode:_____________________ Country:______________________ Telephone:______________________ Fax:________________________
Email:_______________________________________________________
Authorized
Signature : _______________________________________
Invoice Details
Delegate Details
Payment Method
By Direct Transfer: Please quote invoice numbers on remittance advice.
ACCOUNT NAME : MAYBANK
BANK : PETRO1 LIMITED ACCOUNT NO : 715120013353 (AUD)
SWIFT CODE : MBBEMYKL All bank charges to be borne by payers. Please ensure that PETRO1 SDN BHD received the full invoice amount. * Credit card payment will include a charges 2.8%
Payment Policy: Upon receipt of a completed registration form, it confirms that the organization is registering for the seat(s) of the participant(s) to attend the conference or training workshop. Payment is required with registration and must be received prior to the event to guarantee the seat. Payment has to be received 7 working days prior to the event date to confirm registration.
Venue: All of our training courses are held in 4 – 5 star venues. The course fee does not include accommodation or travel cost. It’s recommended to book the hotel room early as there are only limited room available at the discounted corporate rate. DATA PROTECTION
The information you provide will be safeguarded by Petro1 that may be used to keep you informed of relevant products and services. We take it seriously when it come s to protection of our client data.
Cancellation & Substitutions: Upon receipt of a completed registration form, it confirms that the organization is registering for the seat(s) of the participant(s) to attend the conference or training workshop. Should you be unable to attend, substitutes are always welcome at no additional cost. Please inform us as early as possible. Payment is non-refundable if cancellation occurs 7 working days prior to event commencement. However a substitute is welcome at no additional charges. If cancellation occurs 5 working days prior to the registration date and there is no substitute, the organizer reserves the right to charge 50% of the total investment from your organization.
PETRO1 SDN BHD is not responsible for any loss or damage as a result of a substitution, alteration or cancellation/postponement of an event. PETRO1 SDN BHD shall assume no liability whatsoever in the event this training course is cancelled, rescheduled or postponed due to a fortuitous event, Act of God, war, fire, labor strike, extreme weather or other emergency.
Walk in Registration: Walk-in participants with payment will only be admitted on the basis of seat availability at the event and with immediate full payment.
Program Change policy: The organizer reserves the right to make any amendments and/or changes to the workshop, venue, facilitator replacements and/or modules if warranted by circumstances beyond its control.
Please Debit my credit card:
⎕ VISA ⎕ MASTERCARD Card Number: ___________ - ____________ - ___________ - ____________
Security Code: Expiry Date:
Named printed on card:_______________________________________
Signature:_____________________________________________________________
REGISTER NOW CONTACT: kelvin MAIN: +603 7727 3952 FAX: +603 7727 5278 Email: [email protected]
PROGRAM DETAILS Venue: Perth, Australia Date: 31st Oct – 4th Nov 2016
Credit card Payment
REGISTRATION FORM