Ingenico Telium Configuration
-
Upload
umesh-kumawat -
Category
Documents
-
view
837 -
download
26
Transcript of Ingenico Telium Configuration
-
8/17/2019 Ingenico Telium Configuration
1/18
NARUS TELIUM PACKAGE
Generic Telium UIA
Release Version 15.0.4 (KP4)
May 2, 2016
Ingenico Inc. – 3025 Winward Plaza, Suite 600, Alpharetta, GA 30005 Tel: (678) 456-1200 – Fax: (678) 456-1201
-
8/17/2019 Ingenico Telium Configuration
2/18
NARUS TELIUM PACKAGE • 2/18
Contents
1. Overview 3
2. NON-KP4 Components Summary 4
3. KP4 Components Summary 5
4. Download Procedure 6
4.1. Setup Requirements 6
4.2. LLT download 6
4.3. USB Load 15
4.3.1. Creating USB Load Package 15
4.3.2. Loading USB Load Package 17
-
8/17/2019 Ingenico Telium Configuration
3/18
NARUS TELIUM PACKAGE • 3/18
1. Overview
This release contains Generic Telium UIA application production package for iSC250 and
i S C 48 0 . Telium package includes two separate downloadable formats; Local Download (LLT) and
external USB (ISC250, ISC350, and ISC480 only). It contains specific Telium SDK common components,
add-ons, and NAR specific application releases describe in the next section.
This release contains only the KP4 variant of PK package
• Non KP4 signed core app: N/A
• KP4 signed core app: UIA V15.0.4-3007
Please refer to the ReleaseNotes_TeliumUIA_15.0.4.pdf for release notes.
-
8/17/2019 Ingenico Telium Configuration
4/18
NARUS TELIUM PACKAGE • 4/18
2. NON-KP4 Components Summary
UIA Telium package part number is categorized by hardware and contactless options.Contactless indicates the internal contactless settings set via MANAGER.PAR in the relevantpackage. This package only supports legacy FK key file.
Non-Contactless package Not Applicable
Contactless package
Not Applicable
Package summary:
Telium KIA Version : N/A
Telium TSA Version : N/A Telium CAVDEV Version : N/A
TDA Version : N/A
UIA Version : N/A
Scheme Pack : T2 SCHEMEPACK 0302
-
8/17/2019 Ingenico Telium Configuration
5/18
NARUS TELIUM PACKAGE • 5/18
3. KP4 Components Summary
UIA Telium package part number is categorized by hardware and contactless options.Contactless indicates the internal contactless settings set via MANAGER.PAR in the relevantpackage. This package must be used with KP4 key file.
Non-Contactless package
Not Applicable
Contactless package
PK-UGEN03-1504B3 > iSC250 PK-UGEN31-1504B3 > iSC480
Package summary:
Telium KIA Version : 0300
Telium TSA Version : 0302
Telium CAVDEV Version : 0123
TDA Version : 14.0.3.0003
UIA Version : 15.0.4.3007
Scheme Pack : T2 SCHEMEPACK 0302
-
8/17/2019 Ingenico Telium Configuration
6/18
NARUS TELIUM PACKAGE • 6/18
4. Download Procedure
4.1. Setup Requirements
Download host (PC) must meet the following requirements• Running Windows XP, Windows7 (32 and 64 Bit)
• Have a minimum of LLT 4.3, 4.4, 4.4.6 or 4.5.2 installed and Sagem device Portconfigured to connect to Telium devices via USB port. Refer to LLT User ’s guide forinitial setup.
Device must meet the following requirements
• NAR Profile [0248-014 ]
Terminal software packages provided in this kit are intended only for productionprofiled unit [0248-014]. This value appears briefly at the start of boot up sequenceif OS and Manager exist on terminal. Software packages are not intended for mock up profileunit. Loading this software into a mockup unit will render the device unusable which must bereturned to Ingenico for factory reset. Mock up profile unit has an unmistaken flashing of thewarning sign as shown below
4.2. LLT download
Download is triggered by LLT command line script. Make sure LLT has been installed andconfigured correctly.
LLT_LOAD.BAT detects LLT installation path in the registry and will set the path accordingly.The screen capture information of Part# and Device may change based on the current packageused.
-
8/17/2019 Ingenico Telium Configuration
7/18
NARUS TELIUM PACKAGE • 7/18
The following table contains shortcut guide to putting the device in the desired mode.
Functions IPP320/IPP350
keypad ISC250/ISC350/ISC480
keypad Sequence
Reboot ‘#’ ‘
-
8/17/2019 Ingenico Telium Configuration
8/18
NARUS TELIUM PACKAGE • 8/18
**********************************************************************************************
**********************************************************************************************
Part Number : PK-UGEN05-1502B3
Device : ISC350 Security Profile : PRODUCTION 0248-014
Package must be used only on ISC350 containing either
factory profile 4112-255 or the PRODUCTION 0248-014 profile.
A reboot is required following a delete all sequence: "1-3-4-6". This action creates the
HOST directory for the subsequent host specific data files download.
PK-UGEN05-1502B3 may require additional software package.
**********************************************************************************************
**********************************************************************************************
LATEST LLT DETECTED IN [ C:\Program Files\TELIUM Tools\LLT 4.5.2\ ]
ENTER COM PORT# or [ENTER] for COM1 :
-
8/17/2019 Ingenico Telium Configuration
9/18
NARUS TELIUM PACKAGE • 9/18
6. Make sure device is in LLT mode.
********************************************************************************************** **********************************************************************************************
Part Number : PK-UGEN05-1502B3 Device : ISC350 Security Profile : PRODUCTION 0248-014
Package must be used only on ISC350 containing either factory profile 4112-255 or the PRODUCTION 0248-014 profile.
A reboot is required following a delete all sequence: "1-3-4-6". This action creates the HOST directory for the subsequent host specific data files download.
PK-UGEN05-1502B3 may require additional software package.
********************************************************************************************** **********************************************************************************************
LATEST LLT DETECTED IN [ C:\Program Files\TELIUM Tools\LLT 4.5.2\ ]
ENTER COM PORT# or [ENTER] for COM1 :21
MAKE SURE DEVICE IS SET TO "LLT" MODE
PRESS ENTER WHEN "LLT" IS DISPLAYED ON DEVICE SCREEN...
7. Press Enter to continue
**********************************************************************************************
**********************************************************************************************
Part Number : PK-UGEN05-1502B3
Device : ISC350 Security Profile : PRODUCTION 0248-014
Package must be used only on ISC350 containing either
factory profile 4112-255 or the PRODUCTION 0248-014 profile.
A reboot is required following a delete all sequence: "1-3-4-6". This action creates the
HOST directory for the subsequent host specific data files download.
PK-UGEN05-1502B3 may require additional software package.
**********************************************************************************************
**********************************************************************************************
LATEST LLT DETECTED IN [ C:\Program Files\TELIUM Tools\LLT 4.5.2\ ]
ENTER COM PORT# or [ENTER] for COM1 :21
MAKE SURE DEVICE IS SET TO "LLT" MODE
PRESS ENTER WHEN "LLT" IS DISPLAYED ON DEVICE SCREEN...
---------------------------------------------------------------------------------
PK-UGEN05-1502B3 LOADING IN PROGRESS. PLEASE WAIT...
---------------------------------------------------------------------------------
-
8/17/2019 Ingenico Telium Configuration
10/18
NARUS TELIUM PACKAGE • 10/18
8. Info window pops up indicating progress and state of connection.
Skip to step 11 if loading ISC250, ISC350, or ISC480.Step 9 through 10 applies only to IPP3xx LLT factory loading. IPP3xx consist of a 2-stepsdownload due to system size limitation on factory unit. The initial load is required toincrease the swap and system size. This is a onetime process.
-
8/17/2019 Ingenico Telium Configuration
11/18
NARUS TELIUM PACKAGE • 11/18
9. IPP3xx will boot up to the ‘Langue’ screen after the initial load (package 1 of 2). User willget additional prompts to manually put the device in LLT mode. Follow the instruction onhow to put the IPP320 into ‘LLT’ mode prior to proceeding with the second part of thedownload.
##################################################################################
Part Number : PK-UGEN04-1502A3 Device : IPP320
Security Profile : PRODUCTION 0248-014
Package must be used only on IPP320 containing either
factory profile 4112-255 or the PRODUCTION 0248-014 profile.
A reboot is required following a delete all sequence: "F1-F4-F2-F3".This action creates the HOST directory for the subsequent host specific
data files download.
PK-UGEN04-1502A3 may require additional software package.
##################################################################################
LATEST LLT DETECTED IN [ C:\Program Files\TELIUM Tools\LLT 4.5.2\ ]
ENTER COM PORT# or [ENTER] for COM1 :21
MAKE SURE DEVICE IS SET TO "LLT" MODE
PRESS ENTER WHEN "LLT" IS DISPLAYED ON DEVICE SCREEN...
---------------------------------------------------------------------------------
PK-UGEN04-1502A3 PACKAGE 1 OF 2 LOADING IN PROGRESS. PLEASE WAIT...
---------------------------------------------------------------------------------
##################################################################################
PACKAGE 1 OF 2 SUCCESSFULLY LOADED
##################################################################################
WAIT FOR DEVICE TO RE-START. MANUALLY PUT DEVICE IN LLT MODE AND PRESS ENTER..
-
8/17/2019 Ingenico Telium Configuration
12/18
NARUS TELIUM PACKAGE • 12/18
10. A successful screen for IPP3xx LLT load
##################################################################################
Part Number : PK-UGEN04-1502A3 Device : IPP320 Security Profile : PRODUCTION 0248-014
Package must be used only on IPP320 containing either
factory profile 4112-255 or the PRODUCTION 0248-014 profile.
A reboot is required following a delete all sequence: "F1-F4-F2-F3".This action creates the HOST directory for the subsequent host specificdata files download.
PK-UGEN04-1502A3 may require additional software package.
##################################################################################
LATEST LLT DETECTED IN [ C:\Program Files\TELIUM Tools\LLT 4.5.2\ ]
ENTER COM PORT# or [ENTER] for COM1 :21
MAKE SURE DEVICE IS SET TO "LLT" MODE
PRESS ENTER WHEN "LLT" IS DISPLAYED ON DEVICE SCREEN...
---------------------------------------------------------------------------------
PK-UGEN04-1502A3 PACKAGE 1 OF 2 LOADING IN PROGRESS. PLEASE WAIT...
---------------------------------------------------------------------------------
##################################################################################
PACKAGE 1 OF 2 SUCCESSFULLY LOADED
##################################################################################
WAIT FOR DEVICE TO RE-START. MANUALLY PUT DEVICE IN LLT MODE AND PRESS ENTER..
---------------------------------------------------------------------------------
PK-UGEN04-1502A3 PACKAGE 2 OF 2 LOADING IN PROGRESS. PLEASE WAIT...
---------------------------------------------------------------------------------
##################################################################################
PACKAGE 2 OF 2 SUCCESSFULLY LOADED
##################################################################################
-------------------------------------------------------------------------
**** * * ****** ****** ******** **** ****
* * * * * * * *
* * * * * * * *
**** * * * * ***** **** **** * * * * * * * * * * * * * * * *
***** **** ****** ****** ******** ***** ***** -------------------------------------------------------------------------Loading is completed Press any key to continue . . .
-
8/17/2019 Ingenico Telium Configuration
13/18
NARUS TELIUM PACKAGE • 13/18
11. A sample screen shot of successful ISC350 LLT load.
********************************************************************************************** **********************************************************************************************
Part Number : PK-UGEN05-1502A3 Device : ISC350 Security Profile : PRODUCTION 0248-014
Package must be used only on ISC250 containing either factory profile 4112-255 or the PRODUCTION 0248-014 profile.
A reboot is required following a delete all sequence: "1-3-4-6". This action creates the HOST directory for the subsequent host specific data files download.
PK-UGEN05-1502A3 may require additional software package.
********************************************************************************************** **********************************************************************************************
LATEST LLT DETECTED IN [ C:\Program Files\TELIUM Tools\LLT 4.5.2\ ]
ENTER COM PORT# or [ENTER] for COM1 :21
MAKE SURE DEVICE IS SET TO "LLT" MODE
PRESS ENTER WHEN "LLT" IS DISPLAYED ON DEVICE SCREEN...
---------------------------------------------------------------------------------
PK-UGEN05-1502B3 LOADING IN PROGRESS. PLEASE WAIT...
---------------------------------------------------------------------------------
##################################################################################
PACKAGE PK-UGEN05-1502A3 SUCCESSFULLY LOADED
##################################################################################
Loading is completed
Press any key to continue . . .
12. This completes the LLT download. Press ENTER.
13. Device reboots to KIA INJECTION option screen and ready for serial number and keyinjection.
14. Following a successful key injection, Telium manager goes through the initialization of theMANAGER.PAR file and boots to UPOS Interface Application splash Screen.
Device requires a reboot after Telium Manager successfully initializes contactlesssettings in MANAGER.PAR. This is a one-time process.
-
8/17/2019 Ingenico Telium Configuration
14/18
NARUS TELIUM PACKAGE • 14/18
15. A download failure screen. Please refer to downloadlog.txt in the root directory fordetails.
********************************************************************************************** **********************************************************************************************
Part Number : PK-UGEN05-1502B3 Device : ISC350 Security Profile : PRODUCTION 0248-014
Package must be used only on ISC350 containing either factory profile 4112-255 or the PRODUCTION 0248-014 profile.
A reboot is required following a delete all sequence: "1-3-4-6". This action creates the HOST directory for the subsequent host specific data files download.
PK-UGEN05-1502B3 may require additional software package.
********************************************************************************************** **********************************************************************************************
LATEST LLT DETECTED IN [ C:\Program Files\TELIUM Tools\LLT 4.5.2\ ]
ENTER COM PORT# or [ENTER] for COM1 :21
MAKE SURE DEVICE IS SET TO "LLT" MODE
PRESS ENTER WHEN "LLT" IS DISPLAYED ON DEVICE SCREEN...
---------------------------------------------------------------------------------
PK-UGEN05-1502B3 LOADING IN PROGRESS. PLEASE WAIT...
---------------------------------------------------------------------------------
!!!!ErrorCode: -8!DOWNLOAD FAILED - PPP CONNECTION PROBLEM!!!!
------------------------------------------------------------------------- ****** ** ******* * ******** ****** * * * * * * * * * * * * * * * * ***** ******** * * ***** * * * * * * * * * * * * * * * * * * * * * ******* ******* ******** ****** -------------------------------------------------------------------------Press any key to continue . . .
-
8/17/2019 Ingenico Telium Configuration
15/18
NARUS TELIUM PACKAGE • 15/18
4.3. USB Load
ISC250, ISC350 and ISC480 are capable of handling software download via FAT16 or FAT32formatted USB flash memory. The USB package format is created by running theCOPY_TO_USB.BAT. This generates downloadable software package into the attached USBmemory.
The batch script generates downloadable software package into USB memory stick.
We highly recommend that the USB flash memory use in loading be kept for suchpurpose and contains no other artifacts.
Please refer to Table1 keying guide to putting the device in the USB ready mode.
4.3.1. Creating USB Load Package
1. Double click COPY_TO_USB.BAT. Enter Windows assigned USB drive letter whenprompted.
********************************************************************************************** **********************************************************************************************
Part Number : PK-UGEN05-1502B3 Device : ISC350
Security Profile : PRODUCTION 0248-014
Package must be used only on ISC350 containing either factory profile 4112-255 or the PRODUCTION 0248-014 profile.
This script generates telium usb downloadable package on external usbflash. Telium supports FAT16 or FAT32 formatted usb flash drive
drive. Please make sure USB memory has been properly formatted. werecommend a separate USB memory flash for download purpose.
PK-UGEN05-1502B3 may require additional software package.
**********************************************************************************************
**********************************************************************************************
ENTER WINDOWS ASSIGNED USB FLASH DRIVE LETTER:
-
8/17/2019 Ingenico Telium Configuration
16/18
NARUS TELIUM PACKAGE • 16/18
2. USB load package gets generated automatically if the same package does not exist in theflash drive. All relevant files will be copied over onto the USB flash and verified for integrity.
********************************************************************************************** **********************************************************************************************
Part Number : PK-UGEN05-1502B3 Device : ISC350 Security Profile : PRODUCTION 0248-014
Package must be used only on ISC350 containing either factory profile 4112-255 or the PRODUCTION 0248-014 profile.
This script generates telium usb downloadable package on external usbflash. Telium supports FAT16 or FAT32 formatted usb flash drivedrive. Please make sure USB memory has been properly formatted. werecommend a separate USB memory flash for download purpose.
PK-UGEN05-1502B3 may require additional software package.
**********************************************************************************************
**********************************************************************************************
ENTER WINDOWS ASSIGNED USB FLASH DRIVE LETTER: F
GENERATING "PK-UGEN05-1502B3" USB PACKAGE ...
SWAP FILES COPIED OK
HOST FILES COPIED Ok
VERIFY USB SWAP FILES...
VERIFY USB HOST FILES...
USB CONTENT VALIDATED :-)
SAFELY EJECT FLASH DRIVE
Press any key to continue . . .
-
8/17/2019 Ingenico Telium Configuration
17/18
NARUS TELIUM PACKAGE • 17/18
3. Eject USB flash drive.
User will be prompted to exit or overwrite if similar package part# already exists on thetargeted USB flash drive.
PART number echoed on command screen reflects the current package. This may change.
********************************************************************************************** **********************************************************************************************
Part Number : PK-UGEN05-1502B3
Device : ISC350
Security Profile : PRODUCTION 0248-014
Package must be used only on ISC350 containing either factory profile 4112-255 or the PRODUCTION 0248-014 profile.
This script generates telium usb downloadable package on external usb
flash. Telium supports FAT16 or FAT32 formatted usb flash drivedrive. Please make sure USB memory has been properly formatted. werecommend a separate USB memory flash for download purpose.
PK-UGEN05-1502B3 may require additional software package.
********************************************************************************************** **********************************************************************************************
ENTER WINDOWS ASSIGNED USB FLASH DRIVE LETTER: F
PK-UGEN05-1502B3 ALREADY EXIST ON USB DRIVE F
Press ENTER TO OVERWRITE or "Q" to quit :
4.3.2. Loading USB Load Package
4. Insert the USB flash drive into device USB host port.
5. On the device, do a ‘Delete all applications except system files’ steps as shown in Table 1above.
6. Reboot the device
7. Reboot and hold down ‘4’ key while device boots up. Release when device screen displays
-
8/17/2019 Ingenico Telium Configuration
18/18
NARUS TELIUM PACKAGE • 18/18
USB MASS STORAGE
8. Device detects for valid USB formatted package and displays package name. Downloadstarts immediately if no other package is detected.
PK-UGEN05-1502B3 …
9. Software activation occurs at the end of the download. OK indicates successful validationand completes the USB download.
PK-UGEN05-1502B3 Software Activate OK
10. Device reboots to KIA INJECTION option screen and ready for serial number and keyinjection.
11. Following a successful key injection, Telium manager goes through the initialization of the
MANAGER.PAR file and boots to UPOS Interface Application splash Screen.
Device requires a reboot after Telium Manager successfully initializes contactlesssettings in MANAGER.PAR. This is a one-time process.