INFUSOR Portable Elastomeric Infusion System INFUSOR System is an easy-to-use elastomeric (balloon)...

4
INFUSOR Portable Elastomeric Infusion System Simplify the complex Portable Lightweight Disposable

Transcript of INFUSOR Portable Elastomeric Infusion System INFUSOR System is an easy-to-use elastomeric (balloon)...

Page 1: INFUSOR Portable Elastomeric Infusion System INFUSOR System is an easy-to-use elastomeric (balloon) system that provides continuous infusion of combination therapies and pain management.

INFUSORPortable Elastomeric Infusion System

Simplify the complexPortable • Lightweight • Disposable

Page 2: INFUSOR Portable Elastomeric Infusion System INFUSOR System is an easy-to-use elastomeric (balloon) system that provides continuous infusion of combination therapies and pain management.

CONTINUOUS INFUSION PRODUCTS

2C1063KP INFUSOR LV 10 1 day 10 mL/hr 240 mL

300 mL

12

2C1156KP INFUSOR LV 7 39 hours 7 mL/hr 272 mL 12

2C1009KP INFUSOR LV 5 2 days 5 mL/hr 240 mL 12

2C1008KP INFUSOR LV 2 5 days 2 mL/hr 240 mL 12

2C1087KP INFUSOR LV 1.5 7 days 1.5 mL/hr 252 mL 12

Product Code Color Description

Nominal Delivery

TimeNominal Flow

RateNominal Volume

Maximum Volume

Units Per

Case

MULTIRATE INFUSOR PRODUCTS

2C9961KP MULTIRATE LV (5, 7, 12) 48-34-20 hr 5, 7, 12 mL/hr 240 mL300 mL

12

2C1155KP MULTIRATE LV (2, 3, 5) 120-80-48 hr 2, 3, 5 mL/hr 240 mL 12

REGIONAL ANALGESIA INFUSOR WITH PATIENT CONTROL MODULE (PCM)

2C1811K RAI w/PCM (5, 7, 12) 48-34-20 hr 5, 7, 12 mL/hr 240 mL 300 mL 6

2C1100 BELT BAG

2C11006

per case

2C1700KP INFUSOR SV 0.5 7 days 0.5 mL/hr 84 mL 105 mL 12

2C1704P INFUSOR SV 4 1 day 4 mL/hr 96 mL

130 mL

12

2C1701KP INFUSOR SV 1 4 days 1 mL/hr 96 mL 12

2C1702KP INFUSOR SV 2 2 days 2 mL/hr 96 mL 12

These devices are indicated for patients requiring slow, continuous intravenous, intra-arterial, epidural, or subcutaneous administration of medications. The INFUSOR device must be filled in accordance with the procedures described in each accompanying direction insert.

Page 3: INFUSOR Portable Elastomeric Infusion System INFUSOR System is an easy-to-use elastomeric (balloon) system that provides continuous infusion of combination therapies and pain management.

The INFUSOR System is an easy-to-use elastomeric (balloon) system that provides continuous infusion of combination therapies and pain management.

Convenientn DISCREET — small and easy to conceal, blends into the patient’s lifestylen INTEGRATED — the coil cap design helps minimize tubing tanglingn SILENT OPERATION — no moving parts or motors, to disrupt the patient’s sleep

Well-Beingn SAFEGUARD — these products contain no natural rubber latex and help block UV rays1

n KINK-RESISTANT TUBING — reduces interruptions of medication deliveryn INFUSION PROGRESSION LINES — visually confirms fluid delivery

Cost Effectiven MAINTENANCE FREE — disposable devicen UNCOMPLICATED — no batteries or alarmsn SUPPORT — Baxter is pleased to provide reimbursement overviews which focus on coverage, coding, and

payment for elastomeric infusion devices

Pain ManagementThe INFUSOR System can be used in combination with other therapies and helps ensure the delivery of medication to help control the patient’s pain while minimizing interference with other post-surgical therapies.

1. The INFUSOR System housing contains UV-blocking capabilities effective to 380 nm which block UVB, UVC, and most UVA rays.

MADE IN THE USA

Page 4: INFUSOR Portable Elastomeric Infusion System INFUSOR System is an easy-to-use elastomeric (balloon) system that provides continuous infusion of combination therapies and pain management.

Baxter, Infusor and Multirate are trademarks of Baxter International Inc.Baxter Healthcare Corporation, Medication Delivery, Route 120 and Wilson Road, Round Lake, IL 60073 www.baxter.com 420394 5K 2/12

Medication Delivery

Single-use only device. Rx Only. For safe and proper use of these devices, refer to the appropriate Directions for Use.

Infusion innovation from a trusted nameBaxter has over 20 years of experience with ambulatory infusion devices. Our portfolio of products and services reflects our commitment to providing our customers with innovation and value across our extensive line of healthcare products.

For more information about our products and services, please contact our Medical Information at 1-800-933-0303or visit www.Infusor.com

MADE IN THE USA