Infrared heating systems
1
HEAT EXCHANGERS Ametek, Chemical Products Diu. Wilmington. Del. Supercoil heat exchangers from Ametek Inc. are designed for heating and cooling a wide range of metal-finishing solutions including electroplating, electroforming, and electroless plating baths; acidic and alkaline solutions for etching; chemical milling; anodizing; cleaning; stripping; electropol- ishing; and similar operations. Supercoils can be installed into virtually any type of tank configu- ration. Ametek Minicoil heat exchangers are used to control temperatures in laboratory baths and small production tanks where corrosion is a prob- lem and are widely used for etching and precious metal plating. Circle 160 on reader information card PHOSPHATE HEATER Process Technology Mentor, Ohio Process Technology has designed a heater specif- ically for the difficult application of phosphate heating. These heaters last longer than tradi- tional designs because of their unique construc- tion. They are available in a variety of sizes for both over-the-side and bottom heater applica- tions. Circle 161 on reader information card INFRARED HlAnNG SYSTUIS Thermal Innovations Corp. Manasquan, N.J. Thermal Innovations Corp. specializes in the de- sign and installation of infrared heating systems. The p 3 Gas Infrared Systems can produce IR en- ergy at peak wavelengths of 3.5 to 2.3 microns n,OOO-1,750°Fl at output power densities ranging from 9,000 to 40,000 Btu/ffl/hr. Circle 162 on reader information card October 1999 27
Transcript of Infrared heating systems
HEAT EXCHANGERSAmetek, Chemical Products Diu.Wilmington. Del.
Supercoil heat exchangers from Ametek Inc. aredesigned for heating and cooling a wide range ofmetal-finishing solutions including electroplating,electroforming, and electroless plating baths;acidic and alkaline solutions for etching; chemicalmilling; anodizing; cleaning; stripping; electropolishing; and similar operations. Supercoils can beinstalled into virtually any type of tank configuration. Ametek Minicoil heat exchangers are usedto control temperatures in laboratory baths andsmall production tanks where corrosion is a problem and are widely used for etching and preciousmetal plating.
Circle 160 on reader information card
PHOSPHATE HEATERProcess TechnologyMentor, Ohio
Process Technology has designed a heater specifically for the difficult application of phosphateheating. These heaters last longer than traditional designs because of their unique construction. They are available in a variety of sizes forboth over-the-side and bottom heater applications.
Circle 161 on reader information card
INFRARED HlAnNG SYSTUISThermal Innovations Corp.Manasquan, N.J.
Thermal Innovations Corp. specializes in the design and installation of infrared heating systems.The p 3 Gas Infrared Systems can produce IR energy at peak wavelengths of 3.5 to 2.3 micronsn,OOO-1,750°Fl at output power densities rangingfrom 9,000 to 40,000 Btu/ffl/hr.
Circle 162 on reader information card
October 1999 27
