Inductive Proximity Switches: There are used for sensing ferrous material.

They are available in 6, 8, 12, 18, 30, 36mm diameter with DC / AC Type. Ranges Available for

the inductive are 1, 2, 4, 5, 8, 10, 15, 20mm respectively in flush and non flush type.

Capacitive Proximity Switches: There are used to sense non-metal material such as plastic,

Paper etc. It is available in 18, 30 diameter with DC / AC type.

Ranges available are 6, 15 mm respectively in Non flush type. It has a range adjustment pot.

Supply : DC Type - 10-30V DC Output : NPN / PNP.

AC Type - 90-230V AC Output : Solid State.

Specification:

Diffuse Scan Sensor: Range - 100 / 300 / 500 / 1000 / 2000mm.Housings available in cylindrical metal and rectangle type plastic.

Through Beam Sensor: Range - 3 / 10 / 20 meters. Higher Range also available. Housings in cylindrical metal and rectangle type plastic.

Retro reflective Sensor: Set Consists-Sensor and Reflector. Range 300mm / 1mtr / 3mtr. Housings available in cylindrical metal and Square

type plastic.

Fork / Slot Sensor: Slot sensors are available in 3 / 5 / 20 / 50 / 100mm slot width and 45mm slot depth. Housings available in ABS Plastic.

Mark Sensor: Mark Sensor senses the dark mark on light background or light mark on dark background on sticker / paper. It is used in

various types of packaging machines and are available in NPN or PNP output.

Laser Sensor: Laser sensor is available in Diffuse & Through Beam Type. Laser Diffuse is available for 300mm range Laser Through beam

is available in 3meters range.

Power Pack: Various types of power packs are available for different applications. Units available for single, Dual, Four, Six sensors, ON

delay and OFF delay facility, Bi-stable, Mono-stable, AND Logic, OR Logic, & for Hopper Level control.

Specifications:

Supply - 10…30V DC.

Output - PNP/NPN and NO/NC.

With Sensitivity Adjustment Provided.

Is

Infra systems Offers Anti Crane Collision system for two over head cranes on the same rail. With these units, the two

cranes on the same rail will never collide with each other & thus the damage caused due to collision can be saved. Laser

alignment tool is provided for perfect alignment of Sensor unit and reflector. The reflected beam will be picked up by the

receiver when both the cranes come closer. When the two cranes come within the range, the moving crane will be stopped

immediately. This range can be adjusted for single set point, as required. For two set points, one can be adjusted to get an

alarm at required distance and another can be set stop the crane at required distance.

Model : 03 03 mtr. With single set point.

Model : 10 10 mtr With single set point.

Model : 102 10 mtr With Two set points.

Supply : 230VAC / 110V AC (User Selectable)

With Laser Alignment Tool

Dimension : 180 X 145 X 55mm.

These are available for Single Level Sensing and two Level Sensing. As per the level of liquid, float position changes and corresponding output is used for automation. Control Unit is also available for automatic functioning of pump or Feeder. It is used for sensing the level of liquid in storage tanks, reservoirs, and hoppers.

Anti Crane Collision System

Office: No. 4/55, Vishwas Nager, Ashok Nager,

Near MIDC, Satpur Nashik, Maharashtra - 422 007

Phone No : 0253-6520111, Mobile / Cell Phone: +(91) - 9960635183

Email - nishant.infrasystems@yahoo.in Website: www.infrasystemnashik.com

Infra Systems,

Infra red photoelectric Sensors

Inductive & Capacitive Proximity sensors

Safety Light Curtains

Big Display Counters

Digital Counters

Digital Timers

Speed Indicators

Production Data Logging Systems

Level Sensors

Moving Display

Automatic Light Controllers

Safety & Security Products

Custom built Systems as per requirement

Products for Automation

Infra Systems

Infra - red Photoelectric Sensors

Safety light Curtain is suitable for protection of

1. Hand protection2. Finger protection3. Body protection / Part of Body.

Models are available in parallel and cross beam types form 90 mm height to 1600mm height and also as per the customer requirement. Supply of the sensor is 24V DC and it can be directly connected to PLC. Controllers are available with supply voltage 230VAC and it is available in Wall mounting. Panel mounting & DIN Rail mounting. These are used on power presses, Molding, Robots, welding presses, bending machines and many SPMs for operator's safety while working.

Supply : 24V DCOutput : PNPNo. Of Beam : 8, 10, 16, 24, 32Nos And as per requirement.Pitched Offered : 30, 40, 50, 90 mm.Adjustable Range : Up to 3mtrs.

SPECIFICATIONS :

Event / Stroke / Production Counter : It is used for object counting and available in 19mm display height & 6 digits. Accepts input from Proximity / photoelectric Sensor or limit switch or through any potential free contacts. Provides supply for sensors.Preset Counter : Offers relay output when set value is reached. Auto / Manual reset is available with time setting on auto reset.Available in 6 digits. Set value can be entered easily. Accepts input from proximity / Photoelectric Sensor or limit Switch or through any potential free contacts.Speed Switch / Zero Speed Switch : Continuously monitors RPM of Rotating shaft or object. Facility to set upper and lower speed limits. Display indicates RPM and output is offered through relay contacts. Accepts input from proximity / IR sensor or Limit Switch or any potential free contacts. Programmable Timer: This is 3 digits timer in 72 X 72 housing. This timer had four models ON delay, OFF Delay, Cyclic ON First, and Cyclic OFF First. Time is selected by user. Output offered is through 2 changeover relay contacts.Time Totaliser / Hour Meter : Used for time management. Count and Displays time in either on Hours : Minutes or Hours : Minutes : Sec. and is offered in 6 digits.

Supply : 230VACOutput : Potential Free contact (NC-C-NO)Input from NPN / PNP sensors, Limit switch.Memory back up : Provided through EPROM.

SPECIFICATIONS :

Safety Light Curtain for Power Presses

Infra Systems offers a range of products for Home / Building Automation. These products are used for various applications in day to day life. Using these products, life can be made safe, relaxed and comfortable. These products also save electricity or water to a great extent. Which results in lots of saving in your electricity and water bills?Use of Infra systems Home / Building Automation Products enriches your life and makes daily life more enjoyable.

Auto Flush

Application :

In all highly frequently used washrooms such as industrial corporations, buildings, bars,

restaurants, hospitals, have great demands for continuous flushing of the water in order to

maintain cleanliness, which in turn keeps the water flowing even when it is not in use. Auto Flush

offers you the facility of self closing elves.

Suitable for Toilets with concealed or outside plumbing. For use in Factories,

Schools, Colleges, Offices, Malls, Hotels, Institutions, Picture hall etc.

Automatic Water Level Controller

Application :

Usually pump is operated manually at a predetermined level. Little negligence or human error

can cause overflow of the tanks or dry running of the motor, which in turn damages the pump sets.

suitable for Houses, Residences, Banglows, hotels, hospitals, Factories etc.

Twilight Switch Timer

Application :

This model is combination of Twilight Switch and Timer. At many places, few lights are required to be ON during whole night and few lights can be put off at midnight. This product is most suitable for this product. It offers two outputs. Both the outputs get ON in the evening. One output gets OFF after preset time is over and other output gets OFF in the morning. This works on 220V AC and offers potential free relay contacts for further interlock. Sensor is to be placed outside the box. Sensitivity adjustment is provided.

Suitable for commercial establishments, Factories, societies, schools, colleges, petrol pumps, Hospitals, Gardens, Hotels, Hostels, Offices etc.

Auto Tap

Application :

Enormous increase in water consumption, wastage and scarcity of water in particular season.

With the Photon's Auto Tap you can miraculously save the water and its fully automatic operation

ensures total hygienic conditions.

Suitable for factores, Schools, Colleges, Offices, Malls, Hotels, Institations, Picture

halls.

PIR AC Controller

Application :

PIR Controller is mainly suitable for executive cabins. It keeps Room Lights and AC working only when a person is present in the cabin. PIR sensor is placed at such a place so it could sense movements of host and gusts in cabin. If there is no movement, it waits for some present time. AC and lights are switched OFF. As soon as person enters the cabin, AC and lights are again switched ON automatically. This works on 220 V AC supply and operate load up to 2200 watts.

Suitable for Room - Air - Conditioners for comfortable room temperature and for Room lighting etc.

PIR Light Controller

Application :

PIR Light Controller senses human motion within its coverage area and make the lights ON. So lights get

ON only when they are actually required. There is built-in-timer. So once the lights gets ON. They are kept ON

for required preset time Unit has night sensing facility so lights gets ON only when it is dark. You can also set

sensitivity level for darkness. This works on 220V AC and operate load up to 800 Watts. It has range of around

8-10 meters with 110 degree sensing angle.

Suitable at public Toilet, Toilet Blocks at factories or offices, Public urinals, Hotel Lobbies,

Passages, Corridors, Stores. Record / Locker Rooms, Museums, for controlling air curtains, sliding doors, etc.

Home / Building Automation Products