Information for customers, distributors, staff and friends · Information for customers,...

November 2014 Issue

Information for customers, distributors, staff and friends

CRANE LINEJob Site reports

Versatile and flexible : SENNEBOGEN 673 p. 5

Telescopic crawler crane in civil construction p. 5

Mobile crane implementation: HPC 40 p. 5

Floating foundation engineering: 6130 HD p. 6

Casing specialists in Hong Kong: 2x 6130 HD p. 6

SENNEBOGEN 5500 & 7700: Crawler Cranes p. 7

7700 on the high seas p. 7

Crawler crane as bridge builder: 7700 p. 7

LAST BUT NOT LEAST p. 8

GREEN LINEJob Site reports

818 - Recycling under the toughest of conditions p. 2

835 - Quiet and energy-efficient p. 2

Logistics for inland ports: SENNEBOGEN 835 p. 3

Coal handling in best time: 880 EQ at Izmir p. 3

Ports handling: 835 R Special at Port of Berwick p. 3

2x SENNEBOGEN 830 M Trailer in Finland p. 4

Scrap Recycling: SENNEBOGEN 850 Electro p. 4

Versatile implementation: 830 Vario Tool p. 4

120 t TELESKOPIC CRANE

CRAWLER

Ausleger Juli 2011 2

ALLROUNDERS FOR RECYCLINGRecycling under the toughest of conditions: The SENNEBOGEN 818 Elektro at MidUK

The working conditions to which the SENNEBOGEN 818 R Elektro is exposed at MidUK Recycling Ltd., could not be more difficult. The electrically-operated machine is used for recycling gypsum board.

Delivered toward the end of 2013, the SEN-NEBOGEN 818 has proven its worth under the most difficult of conditions. MidUK processes gypsum board from industrial and construction waste and separates the gypsum from cardboard and other construc-

In British Nottingham, MidUK uses a SENNEBOGEN 818 Elektro to recycle gypsum wallboard.

STATEMENT„Electric drives are the future in our in-dustry. The SENNEBOGEN 818 Elektro is the perfect material handling machi-ne for the tough conditions of recycling gypsum board. Giving incredible low running costs and being extremely reliable is also very important“ Site Manager Ian Sanderson, MidUK

Quiet and energy-efficient: TSR Recycling relies on electrical scrap handling

EditorialEditorial

Dear customers, partners, employees and friends, the trend is clear and leads to larger ma-chines. This is the challenge we have had to face successful in the recent past. With the new 6113 telescopic crawler crane with its 120 tons lifting capacity we currently bring the largest SENNEBOGEN telescopic

crane on the market. Thereby we are able to expand our product range a further step upwards. At the same time the largest SENNEBOGEN duty cycle crane is in the starting blocks - with 300 tons capacity an immense expansion in terms of payload and performance. Details will follow soon. „By the way“ we inaugurated this year

our Academy and the Erich Sennebo-gen Museum and commissioned the new training center to operation. Many details can be experienced in the new BOOM Supplement.

An interesting read wishes you

Erich Sennebogen

8.80 meye-level for the driver

Throughout Europe, TSR Recycling GmbH & Co. KG (TSR) is one of the leading recyclers of steel scrap and non-ferrous metals. For material handling the enterprise has long placed their trust in the SENNEBOGEN machines. Recently a new SENNEBOGEN 835 Crawler Electro was placed in service in Halle.

An electrically powered SENNEBOGEN 835 Crawler Special of the current E-series was recently delivered to the TSR subsidiary in Halle by SENNEBOGEN Sales and Service Partner, Tecklenborg Baumaschinen GmbH.

The new SENNEBOGEN 835 R Special is driven by a powerful 160 kW electric motor. At TSR in Halle, thanks to its 35 m cable, the machine is also implemented as a mobile unit for loading trucks and sorting scrap.

Pleased with their new SENNEBOGEN 835: Employees at TSR Recycling in Halle look on as regional sales direc-tor Roland Haupt (SENNEBOGEN) and sales partner Stefan Rißel (Tecklenborg Baumaschinen) officially transfer the keys to subsidiary manager Thomas Stiller (TSR) (center from left).

tion waste so that the remaining powdered gypsum can be used later to produce cement and other products. Equipped with a 75 kW electric motor and 11 m equipment, the ma-chine was set up specifically for use within the hall. The high-power LED headlight system and Multicab cabin which can be ele-vated by 2.7 m gives the driver an excellent overview of the work area. Service and sales partner: E.H. Hassell & Sons Ltd

The machines is impressive in size, however its machine concept and propulsion concept are even more impressive. The material handling machine is powered by a 160 kW electric motor and its equipment is over 20 m in length. In order to be flexible, in spite of the electric drive, the SENNEBOGEN 835 has a 35 m trailing cable in length that permits a convenient work range. Particu-

larly in periods of reduced production, the electric machine shall replace the existing diesel machines and thus save energy costs. With 150 locations in Europe, Russia, and China, TSR Recycling is working worldwide and relies on sustainable solutions - also

with regard to the material handling machi-nes. Use of electric material handling ma-chines saves up to 50 % in operating costs, as compared to conventionally operated machines; this was an important decision criterion.

Boom November 2014 Issue2

3Aktuelle Informationen unter: www.sennebogen.de

With a SENNEBOGEN 835 R Special, now at Port of Berwick all ships can be safely unloaded regardless of the water level. A 3 m pipe-pylon and the elevating cab ensure an optimal overview and maximum safety.

The Port of Berwick is situated on the east coast of Great Britain. A new SENNEBO-GEN 835 R Special, delivered by the UK and Ireland – Sennebogen Port Sales and Service Partner, E. H. Hassell and Sons, at the

The SENNEBOGEN 880 EQ deployed by the Turkish logistics service provider, IDC Liman Isletmeleri A.S., loads approximately 600 t per hour.

On a total harbor area of 191,000 m², as a service provider, IDC daily handles tons of bulk goods and general cargo in the harbor of the Turkish city, Izmir. Here the firm relies on the largest hydraulic material handling ma-chine, the proven SENNEBOGEN 880 EQ. The Equilibrium concept saves approximately up to one third of operating costs. The balan-ced counterweight keeps the main boom in balance and enables fast and fuel-saving work. Since 2008, daily 14,000 t of coal have been unloaded, and loaded onto trucks from the intermediate storage facility. A 470 kW diesel engine ensures the power reserves necessary for the demanding continuous implementation.

Logistics specialist for inland ports: The SENNEBOGEN 835 M E-Series for dry cargo handling

Ports handling: 835 R Special at Port of Berwick

Coal handling in best time: 880 EQ works at Izmir

PORT MATERIAL HANDLING MADE EASY

At Izmir Harbor IDC loads up to 14,000 t of coal a day with a SENNEBOGEN 880 EQ. In this process the Equilibri-um concept saves as much as 33 % of operating costs as compared to conventional material handling devices.

Midyear 2014, the Dutch Sales and Service Partner, Kuiken N.V. was able to transfer three new SENNEBOGEN 835 M machines of the E-Series to the materials handling service provider, E. Drost B.V.

As a longstanding customer, the company was convinced of the quality of the SENNE-BOGEN material handling machines early on, explains owner Ger Drost. Consequently a delegation was pleased to come to pick up the machines in the plant. The enterprise is involved with handling of bulk goods. In

A new SENNEBOGEN 835 R Special is used at Port of Berwick. The customer-specific configuration permits loading and unloading of ships at any time and at any water level.

The Dutch materials handling specialist, E. Drost B.V., successfully implements three new, recently acquired SENNEBOGEN 835 M E-Series machines for demanding materials handling applications.

STATEMENT„With the current machine generati-on, SENNEBOGEN offers perfection in series. Designed for demanding port handling, again we are relying on the SENNEBOGEN 835 M machines of the current E-Series. Thanks to the high quality and the Kuiken full-service con-tract , the machines are always availa-ble, this is something we can depend on.“ Owner Ger Drost, E. Drost B.V.

With a range of 33 m and a maximum safe working load of 30 t, even the largest ships and heavy general cargo can be comfortab-ly unloaded. Thanks to the stable crawler undercarriage, the machine can be used flexibly on the harbor site. With the operator cab placed 5 m forward, the floor window, and the excellent all-round view from the 1.5 m wide harbor cab, the operator always has his work area in view. The machine has

been elevated an additional 7.2 m via a pipe-pylon. Equipped with an 8 m³ clam shell grab the machine loads the arriving trucks in the shortest time possible. A complete cycle takes just one minute.

this regard, the machines must frequently be deployed at different locations. Thanks to a maximum transport width of 3 m, the mobile machines can be quickly loaded onto flat-bed trucks. Currently the machines are working in material handling applications and daily unload tons of gravel and chemical fertilizer.

Delivered in the meantime; the machines have powerful 9 l, 224 kW Cummins diesel engines. Operators Marco, Martin, and Arjan report that in direct comparison with the

predecessor machines, the material handling capacity has significantly increased. And at the same time, the 835 E-Series saves a lot of fuel, thanks to optimized engine set-tings, ECO-Mode and idle stop automation. Through the combination of 10.1 m boom and 7.9 m grapple stick, the new 835 M has more than enough reach. In particular in the of cargo transfer, the comfortable maXcab, which can be elevated to 5.70 m, together with an extensive camera system, offers an optimal overview of the work area and the highest level of work safety.

end of 2013, sets another milestone in the history of the port. In addition to handling fertilizer and feed, cement, timber, and piece goods are also moved with the SENNEBO-GEN material handling machine. Operators and the responsible persons expect higher efficiency and maximum flexibility from the new material handling machine. Tidal ranges of up to 4 m prevail at the site, a height dif-ferential that the machine can conveniently compensate.

only 1 minute for one loading cycle

3More information: www.sennebogen.com


CUSTOMIZED FOR EACH AND EVERY JOB2 x SENNEBOGEN 830 M Trailer in Finland

Two SENNEBOGEN 830 M Trailer machines are used at the timber enterprise, livari Mo-nonen Oy. The trailer machines transport and load wooden utility poles and ensure efficient logistics processes.

Iivari Mononen Oy is one of the leading manufacturers of wooden utility poles in Europe. The hand-selected trunks up to 24 m in length must be piled and loaded several times in the machining process. Recently two new SENNEBOGEN 830 M Trailer ma-chines have been deployed for this purpose. The material handling machines, which were delivered by the Sales and Service Partner, Konekesko Ltd., at the end of 2013, work up to 4,000 operating hours a year in two-shift operation. The Arctic climate of the

When the task at hand is safely transporting and loading the long wooden poles at the lumberyard, at livari Mononen Oy, two SENNEBOGEN 830 M Trailer machines are deployed, each with a 60 t trailer load.

STATEMENT„With the SENNEBOGEN 830 M E-Series Vario Tool system we have a multi-functional machine.“ operator Elwyn Davies, Phoenix Metal

Scrap recycling: SENNEBOGEN 850 R Electro

1,400 m²covert area

The Dutch Sales and Service Partner, Kui-ken N.V., was able to deliver a new SENNE-BOGEN 850 R Electro at the beginning of 2014. The machine is impressive with the highest level of reliability at the lowest energy costs.

As a scrap recycling enterprise, for more than 80 years Koster Metalen B.V. has specialized in the further processing of ferrous metals and non-ferrous metals. For the logistics at the scrapyard in Bevervijk, recently Koster Metalen has been relying on a new SENNE-BOGEN 850 Electro. The electric machine with 250 kW drive power was specially designed to meet the customer`s require-ments. With a reach of up to 21 m and a 5 m pylon elevation, the materials handling

Electrically powered, a new SENNEBOGEN 850 R Special at Koster Metalen in the Dutch town of Beverwijk.at -40 °Cready for work within 10 min

Versatile implementation: 830 Vario Tool

Recently, the Welsh scrap and demolition service provider has been successfully using a new SENNEBOGEN 830 M with Vario Tool. With scrap metal shears or orange-peel grab, the machine is the equipment of choice - at the scrapyard and for demolition.

The family-run company, Phoenix Metal, founded in 1994, processes approximately 250 t of scrap every week at the Gwynedd location in Wales. Material from industrial and commercial operations, as well as from the surrounding households is delivered here daily. The responsible UK and Ireland - SENNEBOGEN Port Sales and Service Partner, E.H. Hassell and Sons, was able

Equipment with the multi-functional Vario Tool, Phoenix Metal flexibly deploys the new SENNEBOGEN 830 M E-Series with Genesis XP 400 R scrap metal shears or multi-shell grab.

remote region with temperatures between -40 degrees and +35 degrees Celsius, is a challenge that SENNEBOGEN meets with its special low temperature package. The machine is ideally equipped with electric tank and engine pre-heating, heated exterior mirrors, special low-temperature oils, and an adaptive heating system fan in the cab, and in just 10 minutes it is reliably ready for use, even at low Arctic temperatures. The SENNEBOGEN 830 hauls loads of up to 60 t in just one trip - this represents considerable savings in time and costs.

to deliver a SENNEBOGEN 830 M in March 2014. The machine is equipped with the SENNEBOGEN Vario Tool, the fully hyd-raulic, multi-functional changing system that enables use of scrap metal shears and grapples on one machine. With just one ma-chine they are now able to safely demolish industrial structures and structural steel-

work on site with the attached scrap metal shears, and then also immediately load the material. The operator, can change the attachments on his own with the aid of the automatic coupling - this saves time and money. Thanks to a 3.00 m transport width, the SENNEBOGEN 830 M can be placed on a flatbed trailer.

machine conveniently covers an area of 1400 m2. The machine can move flexibly thanks to the crawler undercarriage with 4.9 m track width. For boarding and for maintenance purposes the SENNEBOGEN 850 R has a perimeter railing on the uppercarriage and walkaways all around the pylon.

Manager Michel de Pagter explains: „We anticipate lower operating costs and service costs, and a longer service life than compa-rable diesel machines can provide. We can handle minor maintenance tasks oursel-ves, thanks to the well-designed machine structure. For regular maintenance and spare parts supply we rely on the dependa-ble service offered by Kuiken N.V.“ Operator Feek van Stein has particular praise for the good overview from the elevated maXcab Industry cab. The inclined windshield and a set of surrounding cameras combined with the lighting package are very effective when charging the scrap metal shears.

Learn more about this in a video.



OUR VERSATILE TELESCOPIC CRANESVersatile and flexible: SENNEBOGEN 673 HD

The Swiss company, METHABAU, uses a new SENNEBOGEN 673 R for lifting and loading activities. Thanks to the crawler un-dercarriage, the telescopic crane is flexibly on the go and can even move under load.

METHABAU, headquartered in Amriswil/Hefenhofen is currently executing an inno-vative project for Eurobus welti furrer AG at the Bassersdorf/ZH location. Here, on a total area of 14,000 m2, a two-storey depot for approximately 140 buses, will be built by the end of 2014. The Swiss Sales and Service Partner, Kuhn Baumaschinen, was able to deliver a new SENNEBOGEN 673 telescopic crawler crane in November 2013 for all lifting and logistics tasks on the site.

The powerful, 160 kW telescopic crane is impressive through the highest level of flexibility with a robust crawler chassis that enables efficient movement under load and excellent maneuverability on site. The variable, telescopic, 4-section telescopic boom offers a convenient reach of 36 m and maximum working loads of up to 70 t.

Mobile crane implementation on the gas fields: SENNEBOGEN HPC 40 at Pakistan Petroleum Ltd.

Telescopic crawler crane in civil construction

It is likely that there is nowhere on earth where the density of SENNEBOGEN tele-scopic cranes is as high as it is in Singa-pore. This is where the firm, Guan Chuan Engineering & Construction relies on a SENNEBOGEN 683 R-HD for sheet pile wall construction.

Thanks to years of experience and special equipment, Guan Chuan is capable of driving in sheet pile walls even under the most dif-ficult conditions, such as hard rock or areas that are sensitive to vibration. In this regard, the firm uses a so-called crush piler that

STATEMENT„The SENNEBOGEN telescopic cranes are particularly characterized by their flexibility and high reliability. Thanks to the robust design and high safe working loads up to 80 t, the SENNEBOGEN 683 R-HD is particularly well suited for our demanding pile wall applications.“ David Liaw Wie Sein, Guan Chuan Engineering & Construction

For lifting and unloading activities of all kinds, Pakistan Petroleum Ltd. relies on a new SENNEBOGEN HPC 40 truck-mounted crane. The special chassis enables location-independent operation of the 40 t crane.

At the end of 2013 the local Service Partner AJCL was able to deliver a new SENNEBO-GEN HPC 40. Thanks to the mobile truck chassis the crane is extremely flexible on the extensive site.

The HPC 40 is equipped with a 30 m telesco-pic boom. The strong, dynamic slewing drive for fast load cycles is powered by a 91 kW diesel engine. During crane operations, the machine works with approximately 3 l of die-sel per hour, as the drive and crane propulsi-on are two separate systems. At Sui, spare parts and material are loaded onto trucks and removed from trucks with the HPC 40.

METHABAU successfully uses a new SENNEBOGEN 673 R to build a bus depot near Zurich. With a 36 m reach and a maximum safe working load of 70 t, the crawler telescopic crane offers versatile implementation.

STATEMENT„The new SENNEBOGEN 673 telescopic crawler crane is perfect for this deman-ding application. The flexibility and stability are convincing, even under load. I can move the crane safely, this saves time and makes the machine a reliable helper on the construction site.“ Driver Andreas Sprecher

is mounted in suspension on a SENNEBO-GEN 683 telescopic crawler crane. With the SENNEBOGEN 683 R-HD, which the Singa-pore Sales Partner, Aly Energy, delivered a telescopic crane of the latest generation has been placed in service. Equipped with the

robust Starlifter undercarriage with a 4.40 m track width, the machine is extremely stable. The 42 m long boom can be variably tele-scoped. As compared to conventional cranes, this crane is ready for operation in a few minutes, and can also be quickly retracted.



only 3 litresper hour in crane operation



Floating foundation engineering: SENNEBOGEN 6130 HD duty cycle crawler crane at AUG. PRIEN

Casing specialists in Hong Kong: Two new SENNEBOGEN 6130 HD duty cycle crawler cranes

FOR HIGHEST DEMANDS - DUTY CYCLE CRANES

Currently a SENNEBOGEN 6130 duty cycle crawler crane is working from a pontoon for the AUG. PRIEN construction firm in Hamburg. Over an area of approx. 3,500 m2 a part of the harbor basin is being filled.

The tradition-rich company, AUG. PRIEN, founded 1873 in Hamburg-Harburg, won the contract for implementation of the construc-tion measure, „Kaimauer Elbbrücken center west with filling“. The new SENNEBOGEN 6130 HD, which was delivered to AUG. PRIEN mid-2013, goes into special implementati-on as one of the first deployments. Since February 2014 the duty cycle crawler crane has been working on the company`s pontoon installing the king piles.

In this regard, the duty cycle crawler crane is equipped with a powerful 354 kW Caterpillar diesel engine and two powerful 250 kN free-fall winches. Thanks to the 5.50 m broad-gauge undercarriage the crane is particularly stable.

The machine is also equipped with a 42 m Delmag hanging leader, MH 39107. AUG. PRIEN in Hamburg uses a SENNEBOGEN 6130 HD duty cycle crawler crane for the demanding construction of a mixed sheet pile wall in the HafenCity.

Tysan Foundation Ltd, uses two new SENNEBOGEN 6130 HD duty cycle crawler cranes for casing work and foun-dation work in the huge city of Hong Kong.Pipes with a diameter of up to 3.3 m are driven into the ground by the two SENNEBOGEN 6130 HD.

With a safe working load of 130 t and 708 kW engine power, the SENNEBOGEN 6130 HD is the latest duty cycle crawler crane of the E-series in the SENNEBOGEN product line. In Hong Kong two of these giants are working side by side for Tysan Foundation.

As a genuine duty cycle crawler crane, the new SENNEBOGEN 6130 HD is made to order for demanding special underground const-ruction, and it is based on the latest E-Series technology. The underground engineering specialists at Tysan Holdings Ltd. in Hong Kong also rely on the machine. The enter-prise, with its 1,400 employees, specializes in pile foundations and foundation work.

Currently both of the machines are deployed at a construction site in Hong Kong. Here the task is to dig bore holes to a depth of 90 m as foundations for a new skyscraper. The 6130 HD with its 708 kW diesel engine is par-ticularly wellsuited for implementation with casing machines. Combined with a Leffer VRM 3300, with a deadweight of 65 t, pipes with a diameter of up to 3.3 m are driven into the ground. In this regard, the casing machine is directly connected mechanically to the duty cycle crawler crane and is driven hydraulically with a capacity of approxi-mately 800 l per minute. The local Sales and Service Partner, Robinson Equipment Ltd. handles the maintenance and service.



5500 & 7700 – Crawler Cranes for Tiong Seng

GLOBALLY SUCCESSFUL: CRAWLER CRANES

In Singapore, two SENNEBOGEN crawler cranes boost the efficiency of materials logistics at Tiong Seng Contractors PTE Ltd while lifting precast concrete components weighing tons.

At present, the company is working on a seven-story computer center made with ready-mix cement near the Ayar Rajah Cre-scent in the metropolis of Singapore, home to millions. Tiong Seng is using a 5500 and 7700 SENNEBOGEN crawler crane to handle logistics on the small construction site.

The robust crawler cranes are extremely stable and highly flexible. The compact up-percarriage of the 7700 makes the 300 ton crane easy to maneuver and transport.Sales and service partner: ALY Energy

To build the seven-story computer center, Tiong Seng is using 5500 and 7700 SENNEBOGEN crawler crane.

STATEMENT„The robust design and ease of use and servicing makes SENNEBOGEN crawler cranes the right machine for the job,“ confirms Tiong Seng

7700 on the high seas

Since mid 2014 a SENNEBOGEN 7700 has been in special deployment on the high seas. The Dutch crane service provider, Zwagerman, uses the 300 t crawler crane for all types of offshore tasks.

Recently the responsible Sales and Service Partner, Kuiken N. V. was able to deliver

Crawler crane as bridge builder: SENNEBOGEN 7700 lifts prefabricated parts weighing up to 100 t

Since the end of 2013 the Russian construction company BaltMostStroy has been using a SENNEBOGEN 7700 crawler crane to build bridges along a new freeway

When building a freeway bridge 800 m in length, prefabricated parts weighing as much as 100 t must be precisely placed with a SENNEBOGEN 7700 crawler crane.

100 t weigh the concrete parts

route. The 300 t crawler crane lifts prefabri-cated parts weighing as much as 100 t onto the concrete foundations.

LLC Lonmadi Saint Petersburg, as Russian Sales and Service Partner, was able to deli-ver a new SENNEBOGEN 7700 crawler crane in October 2013. The company, BaltMostSt-

roy, founded in 1991, uses the flexible crawler crane for its demanding infrastructure construction measure in Russia. Currently the machine is working on construction of a bridge 800 m in length.

Equipped with a 41 m boom and auxiliary jib, the 300 t crane lifts steel elements onto the concreted bridge abutments. A powerful 313 kW Caterpillar diesel engine drives the two 220 kN winches. The compact uppercarriage of the 7700, with a transport width of 3 m, is the largest component which makes the 300 t crane easy to maneuver and transport. The maximum 2.43 m width of all the boom sections, as well as the Starlifter undercar-riage, make transportation easy, even in a container. The boom can be set up in just a few steps thanks to the innovative self-assembly system. For the driver, the maXcab comfort cabin, which can be inclined 20 de-grees, offers an optimal view of the surroun-dings. The robust and easy-to-service design of SENNEBOGEN cranes makes maintenance simple and maximizes reliability in day-to-day operation.

this 300 t SENNEBOGEN crane in the Bene-lux countries. Adapted to special customer requests and the demanding implemen-tation on the high seas. In the future the crane will errect the Offshore Windpark Baltic 2 north of the island Rügen. For this the 7700 was set up on the supply ship, Duisburg.



Investment: Wackersdorf lays the cornerstone for new workshop

„Long-range thinking over generations, this is what characterizes us as a family-run company“, points out CEO, Walter Sennebo-gen, as he explains the new investment in the Wackersdorf location. On the existing factory premises, by the end of 2014 a new production hall will be constructed with a total useable area of 4,000 m2, including a roofed-over material delivery zone and additional break rooms and office space. Together with Plant Manager, A. Scherer, W. Sennebogen, J. Hanisch, and T. Falter lay the cornerstone to conclude the ceremony. A cylinder with current documents, a set of coins, a newspaper, the current corporate

brochure, and also a photo of employees was professionally immured in the cornerstone.A spacious 1,200 m2 uppercarriage welding shop will be built in the new steel construc-tion hall. A separate painting area with wash bay and drying zone on a total of 550 m2 is directly adjacent. Thus in the future the uppercarriages can be painted directly after they are welded. The new steel construction hall will be equipped with a modern welding gas extraction system with efficient heat recovery and hall crane systems with load bearing capacity up to 20 t.

In the future, the large machines and special machines will be prepared for shipment

In fourteen recognized trade and com-mercial occupations that require formal training, on 1 September a total of 22 app-rentices started their professional career at SENNEBOGEN Maschinenfabrik GmbH. Whether precision mechanic, industrial clerk or technical product designer, the bandwidth of recognized occupations that require tech-nical training is extensive and promises an exciting new phase of life.

As part of introduction event, the company was introduced to the career starters, and with the subsequent plant tour the new apprentices were able to get acquainted with their employer and the product range.

„Learning for Life“: Apprenticeship starts at SENNEBOGEN in Straubing and Wackersdorf

Dealer conference in Singapore

Award for Sebastian Sennebogen: The Regensburg University of Applied Sciences awarded top honors for the group work on the theme „configuration and design of an electric water pump for motor vehicles“

Under the direction of SENNEBOGEN Pte. Ltd. a dealer conference was held in Singa-pore on the 3rd and 4th of April 2014, with all dealers from the Asia/Pacific region.

CEO Walter Sennebogen with his Sales Managers, Bernhard Kraus and Alfred Endl, traveled from Germany to participate in the conference. Many dealers came from Korea, Japan, China, Taiwan, Vietnam, Myanmar, Cambodia, Laos, Bangladesh, India, Singa-pore, Indonesia, Australia, Thailand, and Brunei. Pacific Materials Handling from Australia was the most successful Green Line Dealer in 2013 and was honored for its

Successful career start for 22 new apprentices at SENNEBOGEN Maschinenfabrik GmbH in Straubing.

LAST BUT NOT LEAST

Group photo of the entire staff in front of the construction site. The new production hall should be finished by the end of 2014.

The cornerstone for further expansion of the SENNEBO-GEN Group in Wackersdorf was laid jointly: Plant Manager Alexander Scherer, Mayor Thomas Falter, District Administrator Joachim Hanisch, and CEO Walter Sennebogen

Management and works council warmly welcomed the new employees and extended their best wishes for a successful start in professional life.

Six new apprentices started in Wackersdorf.

achievements. The Crane Line prize again went to Aly Energy Pte. Ltd. from Singapore. Frank Forchert CEO of SENNEBOGEN Pte.

Ltd. and responsible for sales in Asia, is pleased to now have strong representation in every country in Asia.

University prize

As part of his mechanical engineering studies, Sebastian Sennebogen, together with other students from the Regensburg University of Applied Sciences, successfully took part in a development competition. For students in their 7th semester the specific assignment was to solve a develop-ment task from the automotive supplier, Continental. Seven student teams from the Regensburg University of Applied Scien-ces participated in the event, „Application Design“. With the theme of the design work - „configuration and design of an electric water pump for motor vehicles“, the students were given a practical and topical task that an engineer would certainly have to accom-

in the second nave of the hall, in the new finishing area. Previously in some cases these machines, with operating weights up to 100 t, had to be setup and dismantled outdoors. A large storage area and office and break facilities round out the extension. The objective of the investment is to offload the previous assembly stations and processing stations, and to provide room for further expansion and more efficient work. The new building`s energy supply is ensured for the future through a modern wood-chip heating system and a large-area photovoltaic sys-tem. Thus over the long-term, the existing buildings on the Wackersdorf site can also be heated in carbon-neutral manner.

plish in professional life. Ultimately the jury selected Sebastian Sennebogen and his team as the well-merited winners, thanks to the extremely innovative design of the developed water pump. Congratulations!


SENNEBOGEN Maschinenfabrik GmbHHebbelstr. 30, 94315 Straubing, GermanyPhone +49 94 21/540-0Fax +49 94 21/[email protected]

Editor-in-Chief: Florian AttenhauserLayout: Melanie OrlogiPhotos: SENNEBOGEN Archive Thanks to all those who have been kind enough to provide photographs. Printing: Erhardi Druck

www.sennebogen.com

IMPRINT

Information for customers, distributors, staff and friends · Information for customers,...

Documents

Transcript of Information for customers, distributors, staff and friends · Information for customers,...