Infinity Usb Phoenix

7/31/2019 Infinity Usb Phoenix

1/7

WBelectronics

Infinity USB Phoenix - Users manual


2/7

Infinity USB Phoenix is connected and powersuppliedby a PC thru a USB1.1 or USB2.0 compatible port orhub. The USB connection is always necessary, even ifthe Infinity USB is only used in Phoenix mode.

To use the Phoenix mode, an additional serial-cablemust be connected to the PC. If the Phoenix features

are not needed, the serial connection is notnecessary. A standard 9-9 male-female straight-thrucable can be used.

After the hardware has been connected for the firsttime, the blue LED wil start flashing to show that theprogrammer is connected to the PC, but the driverhas not yet been installed or loaded.

Introduction Hardware installation

Thank you for buying an

Infinity USB Phoenix from WB Electronics!

Installing the Infinity USB Phoenix requires 3 simplesteps:

1) Connect hardware (page 3)

2) Install driver (page 4-7)3) Install software (page 8)

Even though the Infinity USB software has beendesigned to be as intuitive and easy to use aspossible, a small quickstart guide has been includedon page 9.The newly introduced Phoenix mode is described onpage 10.

For software updates, support, product descriptionsand other information, please visit:

www.infinityusb.com

2 3

(Serialport) (USBport)


3/7

Driver installationDriver installation

4 5

Windows 98 installation

1) Click

2) Select

Click [

3) Insert the WB driver/software CDSelectClick

4) Click

5) Click

[Next]

[Search for best driver for

your device]

Next]

[CD-ROM drive]

[Next]

[Next]

[Finish]

Windows ME installation

1)

2) ClickFinish

Insert the WB driver/software CDSelect

Click

[Search for the best driver

for your device]

[Next]


4/7

Driver installationDriver installation

6 7

Windows 2000 installation

1) Click

2) Select

Click [

3) Insert the WB driver/software CDSelectClick

4) Click

5) Click

[Next]

[Search for a suitable driver

for my device]

Next]

[CD-ROM drive]

[Next]

[Next]

[Finish]

Windows XP installation

1)

Select

Select

Click

Click

4) Click

2) [Search for the best driver

in these locations]

[Search removable

media..]

[Next]

3) [Continue anyway]

[Finish]

Select

Insert the WB driver/software CDClick

[Install from a list or specific

location]

[Next]


5/7

Quickstart guideSoftware installation

8 9

Software installation is common for all operatingsystems:

1) Insert the CD in the CD-ROM drive.2) Run setup.exe on the CD3) Click the Infinity USB Phoenix icon

The Infinity USB Phoenix setup program will theninitiate.

Choose an install location (or pick the defaultlocation). You have the option of creating a shortcutto Infinity USB on your desktop or in the Quick Launchbar.Once setup is complete you can choose to launchInfinity USB by clicking Finish.

Programming a card requires only 3 steps:

1) in the cardreader, and make surethe right card is selected in the combobox.

2) one or more files by pressing the open icons.

3) Press the large button (not the small part withthe arrow) to write the card.

Visit for further programminginstructions.

www.infinityusb.com

Insert the card

Load

Write


6/7

Phoenix modePhoenix mode

10 11

To use the Phoenix mode of Infinity USB, a serial cablemust be attached from the programmer to the PC.

All 3rd party software will use this COM-port forcommunication.

Phoenix mode is entered by pressing the Phoenixbutton on the main window. Youll be prompted tochoose between a frequency of 3.58, 3.68 or6.00Mhz, and either Phoenix or Smartmouse mode.

Pressing will make the red LED light, to showthe programmer is in Phoenix mode. At the sametime, the program will be minimized to tray.

[enable]

All software supporting a COM-port can now be usedfor communicating with the smartcard.

If the Infinity USB Phoenix hardware is mostly used inPhoenix mode (or if Phoenix mode is needed beforethe software is loaded for instance for passwordcontrol), its possible to setup the Infinity USB Phoenixthis way.

Enter the Phoenix-tab in the options | general menu,and choose the needed Phoenix / Smartmousemode. Upon power-up of the hardware, the chosenmode will immediatly be entered.It is ofcourse possible to exit this mode again, simplystart up the software and choose exit phoenix mode.


7/7

Do not use this product for any other purpose thanthe intended. Under no circumstances includingnegligence, shall WB Electronics ApS be liable to youfor any incidental, indirect, speciel or consequentialdamages (including property damage) arising fromthe use or misuse of this software.

The software is exclusively for use with WB ElectronicsApS products. The software must not be altered ormodified in any way.

Copyright 2002-2003 by WB Electronics ApS

Infinity Usb Phoenix

Documents

Transcript of Infinity Usb Phoenix