Inert systems

7/30/2019 Inert systems

1/56

GloveboxesHoods & Vacuum Chambers

Turnkey Systems

Copyright 2010 Terra Universal, Inc.Mini-Catalog Vol. 3, No. 15

Low-Cost Solutions

for High-Tech Industries

Low-Cost Solutions

for High-Tech Industries CompoundingAsepticIsolatormeets

USPrequirementspage20

EconomicalSmartGlovebox:integrated

N2controllermaintainsRHsetpointto

protectsensitivepartspage7

CompoundingAsepticIsolatormeets

USPrequirementspage20

EconomicalSmartGlovebox:integrated

N2controllermaintainsRHsetpointto

protectsensitivepartspage7


2/56

Terra Universal GloveboxesCustom Configurations

On a Standard Basis!

Step 1: Select Enclosure Style and Material

Humidity Control

Begins on page 28These modules monitor and regulate the process gas tomaintain the humidity level you specify. Low-humiditymodules achieve desired conditions by regulating the purge

gas (nitrogen, argon, or dry air).

Process Gas Generation & AnalysisBegins on page 30

Terra provides gas generators, mixers, and monitors to

guarantee a reliable processing environment.

Temperature ControlBegins on page 22

A wide range of process temperature solutions, from -40to +300C. Double-wall, insulated gloveboxes ensure stabletemperatures. The Sequence Controller allows multi-cycle

process documentation and control.

Vacuum Control

Begins on page 10Gloveboxes and vacuum controls for a wide range of process

pressures, from 5" WG to one atmosphere.

Static ControlBegins on page 30

Terra engineers will congure the right combination of ionizers

and dissipative materials to protect sensitive parts against ESD.

Particle and Germ ControlBegins on page 31

Terra helps you meet cleanliness requirements as low asClass 1 through laminar ow and HEPA/ULPA ltration

technologies. Radius corners and ultra-clean materialscontribute to a clean, aseptic processing environment.

Laminar Flow and Exhaust HoodsBegins on page 34

Terras versatile designs let you congure a chamber to your exact process

specicationsusing standard control modules and standard pricing!

Plastic Gloveboxes(Series 100 and 200)

Stainless Steel Gloveboxes(Series 300 - 600)

Whichever modules you select, Terra will deliver atested, turnkey system thats ready for service!

Step 2: Select Environmental Control Modules

Our engineers work hand-in-hand with yours to develop cost-effectivesolutions to unique application challenges.

Custom Sizes Easy-clean radius corners Equipment Interface Modules Process Equipment Enclosures

Double-wall Construction Process Control Software

Special Inlet/Exhaust Filtration More!

Glovebox:

(See overviewon facing page)

ControlCapabilities*

* With selection of appropriate accessories** Specify double-wall, insulated design for

improved efficiency

Low Humidity

High Humidity

ProcessGas Mix

Vacuumto 5" WG

Vacuumto 29.9" WG

Pass-ThroughOven (to 300C)

Gas Heating(to 300F)**

Refrigeration(to -40C)**

HEPA Filtration StaticNeutralization

Serie

s100

Pla

stic

Serie

s200,

210

,310

Serie

s300

SS

Serie

s400

SS

Serie

s500

FullVie

w

Serie

s60

0Fr

ont

View

Bio

SafeSS

Custom Modifications

NOTE: All prices and specifications are subject to change without

otice. Crating charges apply to selected items. Call for information.

2010 Terra Universal, Inc. All rights reserved.

Printed in USA 121510


3/56

A/B. Series 100 Plastic

Gloveboxes See page 8

Available in ve materials 3 Polypropylene

3 Static-Dissipative PVC 3 Acrylic

3 Non-Dissipative PVC 3 Polycarbonate

C. Plastic Vacuum

Gloveboxes See page 10Chambers for vacuum levels to 29.9" Hg- ideal for degassing, drying and anaerobic work

D. BioSafe Gloveboxes See page 21

Smooth, rounded corners with continuous seamwelds for easy disinfection

E. Series 300 Stainless Steel

Gloveboxes See page 14

Ideal for seam welding, leak testing, and other semi-conductor and pharmaceutical processesVersatile side flanges allow easy installation of airlocks, vacuum ovens, and other modules

F. Series 400 Stainless Steel

Gloveboxes See page 16Accommodates pass-through vacuum antechamberRoomy processing area

G/H. Series 500/600 Full-View

Gloveboxes

Series 500 See page 18Features opposing arm ports for dual-side accessTransparent static-dissipative PVC or polycarbonatefront/rear panels

Series 600 See page 19Polycarbonate or safety glass front windowAccommodates air locks and other access modules

. Compounding Chamber See page 20

Meets requirements of USP for sterilecompoundingLaminar flow-through and recirculating designs

J. Insulated Glovebox See page 22

Polyurethane insulation enhances energy efficiencyDouble-pane viewing windowOperates with Terras Constant Temperature Modules(Shown in photo)

StandardGloveboxes

Series 100 Polypropylene

Series 100 Acrylic

Series 200 BioSafeGloveboxfor sterileprocessing

Series 300 Series 400with vacuumantechamber

Series 500

InsulatedGlovebox

Series 600

B

C D

E F

G H

I J

CompoundingAseptic Isolator

SmartGlovebox with on-boardcontrol system page 7

A

1To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15


4/56

Standard environmental controls foreasy, economical system configurationsSample Applications

Temperature/Humidity

Cycling Chamber

Double-wall constructionfeatures 4" of insulation

System shown: Cat. # 1695-02

System shown: Cat. # 1695-03See page 22 for standard models.

This chamber includes a refrigeration module capable of maintaining temperatures as low as-20C. The stainless steel chamber features double-wall construction with 2" ofpolyurethane insulation for optimal thermal efciency. A humidity control system,

including a variable purge controllerand automatic humidity controller,regulates the nitrogen process gas tomaintain an internal moisture level aslow as 2%RH.

Sample Application:

Protein Analysis

A microscope bellows accommodatesanalytical equipment.

Sample Application:

Material Stress Testing

Chamber

Refrigerated, Low-Humidity

This glovebox is ideal for accelerated-life testing of elastomers, ber composites, and othermaterials over a broad range of temperature (-20F to +140F) and humidity (5 to 95% RH).

Double-wall construction is provided on all sides. Viewing windows are double-panepolycarbonate for strength and temperature resistance. Stainless steel walls include 4" ofpolyurethane insulation.

A pass-through oven on one side of the processing chamber allows degassing at temperatures

up to 300C, and an opposing-side air lock allows parts removal. A closed-loop recirculationmodule continuously recycles air through a HEPA lter and an activated charcoal lter forremoval of organic vapors.

2 Thousands of Critical Environment Solutions:www.TerraUniversal.com


5/56

Pharmaceutical

Packaging Chambersesigned for safe handling of pharmaceutical powders, this containment glovebox

perates under negative pressure. Multiple ventilation ports ensure containment ofowders when access doors are opened, and dual vacuum lines allow connection ofacuum wands for easy clean-up of powder spills.

owder containers are introduced into the outside chambers via dual pneumaticallyperated, footswitch-activated doors; a loading platform at the rear of the unitccommodates bulk containers. A large opening on the bottom of the central chamberonnects to a containment drum by means of a rubber bellows, allowing safe removal ofrge packages or loose powder. Overall dimensions: 104"W x 32.5"D x 33"H.

VacuumPorts

4 Vacuum Lines8 EmergencyVentilation

Bellows Connectorto Drum Container

Pneumatic Doors(rear access)

Pneumatic doorswith rear loadingplatforms

System shown:Cat. # 1695-27

Ordering InformationBegins on page 8

System shown:Cat. No. 1695-01

BlowerControls

High-Volume

GasMixer

Recirculation Plenum/Cooler/Clean-out

Air Lock Air Lock

HEPA Filter / Blower withPressure Alarms and Emergency Vent

esigned to provide a clean, moisture-free environment, this glovebox is large enough to

ccommodate wafer spinners used in the deposition process. Its rounded internal cornersso make it ideal for pharmaceutical powders.

incorporates a high-volume process gas mixer that controls percentages of two processases. A three-sided plenum design recirculates the process gas through dual lter/fanodules for HEPA ltration (99.99% efcient @ 0.3 m particles). The bottom plenumcludes cooling coils that compensate for heat-generating process equipment to ensure a

onstant temperature of 68F.

ual-side air locks afford easy loading and unloading of wafers. Sample Application:Photoresist Deposition

Particle-Free, Low-Humidity

Glovebox

Radius corners allow easyleaning




6/56

Radioactive MaterialHandling Chamber

Radius corners simplifycleaning, eliminate seamsand cracks

Bag-in, Bag-out accessport allows safe handlingof packaging containingradioactive materials

This 12-gauge stainless steel isolation glovebox is designed for safe handling of radioactivematerials used in medical applications. It features two chambers connected by a vacuum port.One-piece gaskets and heavy-duty counter-balanced port hatches ensure a low leak rate of0.5% of the volume of the total enclosure per hour (tested under 5" WG of vacuum).

Stable Temperature/Humidity

Containment GloveboxThis glovebox safely contains potential biohazards while providing a stable environment over

a broad range of temperatures (-2C to 36C) tested at various humidity levels between 0and 75% RH. The stainless steel chamber features 2" of insulation and internal dimensionsof 33" x 33" x 33" (overall dimensions: 37"W x 37"D x 52"H). A high-capacity air conditionerholds a stable temperature down to -2C, and a 4000W heater integrated into the evaporatorcoil achieves temperature stability to 36C. The dry nitrogen feed gas provides a low %RH;an ultrasonic humidier provides elevated RH to 74% without moisture condensation. Thechamber includes a bag-in/bag-out port that can be used for transferring waste out of thechamber. The large swing-up access door allows easy cleaning of the chamber.

Standard environmental controls foreasy, economical system configurations

System shown:Cat. No. 1695-10

Low Temperature

A/C ModuleEvaporator Coil

with Heater

0% RHNitrogen

Ultrasonic Humidifier

WasteChute

System shown:Cat. # 1695-26

Bag-In/Bag-Out Port9"-dia. port with closure operated fromglovebox interior. Specify for any Terraglovebox. Cat. # $/Each

1694-43 260.00

BagsPackage of 10 12-mil PVC bags

Cat. # $/Each

1694-44 104.00

Swing-up door for easy accessand cleaning See page 20 for standard

refrigerated models.

Sample Applications



7/56


CO

VariablePurge

Controller

% CODisplay/Control

% RH Display/Control

Humidifier(98% RH) Gas Cooler

(68FConstant)

AirLock

Vent toCeiling

AirLock

Vent to

Ceiling

Ventilated Hazardous

Environment Chamber this application, potentially lethal CO gas is fed into a large chamber at precise

oncentrations to allow accurate sensor calibration.

gas mixing system maintains a ratio of 2% CO/98% air during calibration. To meetequirements for high-humidity sensor performance, a Humex humidier raises theoisture level inside the chamber to 95% RH. A process gas heater and cooler provide

recise calibration temperatures. Circulation fans ensure uniform temperature and humidityroughout the main chamber. An emergency ventilation system evacuates the CO/airixtures from the main chamber.

Model shown:Cat. No. 1695-08

Meteorite

NitrogenChamber

Pneumaticdoor air locks see page 22

his 304 electropolished stainless steel gloveboxcongured for processing meteorite samples inlow-particle, low-humidity environment. Each

ystem consists of two glovebox chambers linkedy a pass-through air lock, which allows transfer

samples without affecting conditions in eitherhamber.

ainless steel glove ports with hypalon gloveslow manipulation of samples. Stainless steelhelves mounted inside each chamber allowganized sample storage.

erras Dual Purge and NitroWatch controlystems automatically regulate the nitrogen ow

the chambers in order to maintain a user setoint between ambient and 5%RH.



8/56

Sample Applications

Low-Humidity, High-Capacity

Processing Chamber

Standard environmental controls foreasy, economical system configurations

This custom glovebox provides optimal visibility and convenientaccess to a large, humidity-controlled processing area. Dualfootswitch-activated pneumatic doors simplify parts insertionthrough large antechambers. The Dual Purge System andDewWatch humidity control systems maintain a user-selected sub-ambient moisture level down to 1 ppm(v).

Ref. No. 1695-11

Anaerobic

Test Chamber

Designed for drug efcacy and dosing studiesin anaerobic environments, this automated,dual-level testing chamber maintains an oxygenconcentration down to 0.1% at a selectedtemperature. Computer-controlled electronicinterlocks and rapid purging antechambers allowtransfer of test samples without disturbing the testenvironment. These interlocks, in coordinationwith programmable UV sterilization and HEPAltration cycles, prevent microbe contaminationof the outside environment during sample/equipment extraction.

Other features include touch screen controlpanel, programmable presets, pneumatic doorsleading into the main chamber, rear access panelsfor large equipment maintenance and end-of-

cycle cleaning.

Applications: Extremely Drug-Resistant (XDR)Tuberculosis Therapy Trials

A/C + Heater

Trace O2 Analyers

N2Generator

DryCycler

PneumaticDoors

& HousingHEPAFiltered

Inlet/OutletVents

H EPA H EPA

HEPA HEPA

H EPA H EPA



9/56

A

N

M

D

L

Smart Glovebox

Automated RH Control System

Seconds toinstall andprogram!

Automates low-humidity processing to preventdegradation of moisture-parts

Gas control system auto-adjusts nitrogen purge tomaintain humidity set point

Ideal for work with semiconductor components, medicaldevices and pharmaceutical powders

Fully integrated turnkey system takes seconds to installand program

erras Smart Glovebox automatically maintains a low-humidity environment tootect moisture-sensitive parts.

s quick-response feedback system continuously monitors the chambers relativeumidity level and indicates the measured value on a bright LED display. Theinute the %RH climbs above a set point value, the Smart Glovebox activatesow of dry nitrogen for as long as needed to restore the desired humidity level.

his fast-acting control system economizes on nitrogen use. Comparison testingveals that the Smart Glovebox maintaining a 10% RH level uses only 22%the nitrogen required by a owmeter-based system of identical size. More

mportantly, this automated operation maintains the integrity of sensitive parts,uch as semiconductor chips, medical devices or pharmaceutical powders,thout operator monitoring.

or optimal performance, select a pass-through air lock, which functions as aansfer buffer zone.

he Smart Glovebox includes a control system, Automatic RB valve, andlet/outlet ttings for 0.25"-diameter gas line. A removable back wall allowstroduction of large process equipment. Select air lock, work surface andoves separately.

H

F I

13"

9"

Nominal DimensionsA D F H I L M N

12 20 26 18 11.1 10.5 10 11

Smart GloveboxSee

DimensionsAbove

Acrylic(1) Static-DissipativePVC(2)

Polypropylene(4) Polycarbonate 304 Stainless Steel(4) 316 Stainless Steel

Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

mart Glovebox 3305-30 1,755.00 3305-31 2,654.00 3305-32 2,686.00 3305-33 2,797.00 3305-34 3,278.00 3305-35 4,098.00

ir Lock(3) 3305-38 299.00 3305-39 500.00 3305-40 406.00 3305-41 331.00 3305-42 1,617.00 3305-43 2,022.00(1) Acrylic is damaged by alcohol and other cleaning agents.(2) Includes grounding terminals. Stainless steel work surface is required to prevent scratching the dissipative surface.(3) Standard mounting is on right side (as shown in photo). Includes gas inlet to allow gas purging(4) Includes 120VAC/60Hz uorescent light

Other Accessories

Stainless Steel Work Surface

Recommended for use in plastic chambers to prevent scratching. Price includes

installation (order together with glovebox).Cat. # $/Each Cat. # $/EachFor Smart Glovebox 3305-44 195.00 For Air Lock 3305-45 55.00

Gloves

Unless indicated, all feature a size 9 hand and are for 8" port.Two-piece Accordion Sleeve/ Cat. # $/Pair

Nitrile Glove Combination 1681-91B 256.00

One-piece Neoprene (black) 1689-03 161.00

Hypalon (white, shown above) 1671-10 205.00

Other sizes andmaterials atTerraUniversal.com

Compare! to the price of a glovebox with

DualPurge/NitroWatch control system



10/56

NitroWatch

Humidity Controller

Glovebox Dual Purge System

Universal Air Lock

Powder-Coated Stand

Casters

Changeable Sleeve and Glove Combination

Series 100

PolymerGloveboxes

How to Order:

1. Select the glovebox of the desired size (single ortwin) and material from the ordering table below.

2. Select the Air Lock for your application. TheStandard or Pass-Through Air Lock is forconnection to one glovebox; Universal Air Lockallows connection of two gloveboxes in series.Right-side mounting is standard.

3. Read across the table to select the appropriateaccessories for your system; all prices include

installation. Other optional accessories are listedon the following pages.

H

F I

15"

10"

Single Model (2 Arm Ports)

Twin Model (4 Arm Ports)

A

N

M

D

L

Nominal Dimensions (inches)Type A D F H I L M N

Single 16.75 24 35 25 11.5 10 10 14

Twin 16.75 24 59 25 11.5 10 10 14

ype Series 100 Plastic Gloveboxes*See

DimensionsAbove

Acrylic**** Static Dissipative

PVC**

NondissipativePVC

Polypropylene***

(Dissipative PVC viewingwindow)

Polycarbonate Stainless SteelWork Surface

(prevents scratching)


ngle Models2 glove ports)

1689-00F 1,828.00 3305-00E 2,728.00 3305-03E 2,222.00 1681-29E*** 2,260.00 1681-31E 2,871.00 1689-11 383.00

win Models

4 glove ports)

1689-16F 2,504.00 3305-10E 4,205.00 3305-11E 3,077.00 1681-30E*** 3,303.00 1681-32E 4,431.00 1681-33 536.00

* Complete with inlet and outlet for gas fittings and relief/bleed valve (order separately).** Includes grounding terminals. The Stainless Steel Work Surface is required with the Static-Dissipative PVC glovebox to prevent

scratching.*** Includes 110VAC, 50/60Hz fluorescent illuminator (for 220VAC/50Hz, add -220 to the part number).*** Acrylic is damaged by alcohol and other cleaning agents.

H

F I

15" 15"

10" 10"

An economical controlled processingenvironment for a wide range ofmanufacturing and testing operations

Dual-gasketed side doors and a fullygasketed back permit introduction of

small and large equipment

Optional gas purge controlsautomatically

3 establish a particle-freeenvironment

3maintain a humidity set pointdown to 0% RH

3minimize system recovery time

10"-diameter glove ports accept awide variety of gloves, includingTerras accordion sleeve and gloveassembly

Available in five materials: acrylic,static-dissipative PVC, nondissipativePVC, polypropylene andpolycarbonate

Terras Series 100 Polymer Gloveboxes provide aclean, low-humidity environment for critical processingoperations in such industries as semiconductor andpharmaceutical manufacturing. Their modular designlets you select the options you need for your application.

Dual side access doors open inward to allow easyparts transfer from inside the chamber. Doors feature

stainless steel reinforcement frames that increase thestructural rigidity of the door by a factor of ve. A built-in LiftLatch securely seals the door without applyinglateral torque that could damage hinges.



11/56

IonBar (with fan module)Projects a balanced stream of ions for neutralization

of static charges throughout a restricted area. Priceincludes installation inside specied glovebox.Models below are for 120VAC operation.

Cat. # $/Each

22" Long 2005-30 816.0033" Long 2005-32 922.0044" Long 2005-31 1,028.00

Universal Air LockThe Universal Air Lock features dual anges (eachwith gaskets) to permit mounting on either the rightor left side of any Terra plastic glovebox. They alsoallow multiple gloveboxes to be connected in series.Select material compatible with your glovebox(es).Right mounting is standard.

Stainless steel frames now standard on allaccess doors.

Pass-Through Air LockChrome-plated racks accommodate adjustableshelves. In-line double-door construction lets youpass small parts easily into the glovebox; you simplyslide a shelf through the outside door to load partsand then through the inside door to unload themin the chamber. Order shelves separately. Rightmounting is standard.

Cat. # $/Each

Acrylic Shelf 1680-67 19.00

Stainless Steel Shelf 1680-68 72.00

Changeable Sleeve and GloveCombination (for 10"-diameter ports)Can be used with a variety of gloves, allowing youto change glove size or type without changing the

sleeve itself. The convoluted section keeps the sleeveoff the operators arm for better air circulation andcomfort. Supplied with one pair of nitrile gloves(select desired size). Clamps included.

See page 24 for additional gloves.

Glove Size With 18" SleeveCat. # $/Pair

8 1689-46 310.009 1689-47 311.00

10 1689-48 312.00

Stands for Series 100 GloveboxesConstructed of all-welded 2" square tubing.

For Single Models For Twin Models(35"W x 24"D x 30"H) (59"W x 24"D x 30"H)

Cat. # $/Each Cat. # $/Each

Powder-Coated 1681-48 692.00 1681-51 852.00

Steel StandStainless Steel Stand 1681-49 957.00 1681-52 1,272.00

Casters (set of 4, 2 with brakes) 1700-44 234.00

Fixed Rear WallA xed rear wall can be specied in place of the standard removable rear wall.

Cat. # $/Each

1681-58 122.00

Detachable BottomAllows Series 100 glovebox to be lifted for easy placement over large equipment.

Cat. # $/Each

1681-55 358.00

Fans ensure evenion distribution.

Plastic Glove Port (see pg. 27 for other designs)Standard on all Terra gloveboxes; can be retrotted onchamber with 11.25" dia. cutouts. Price for single port.

Cat. # $/Each

Glove Port 1694-52 194.00Port Caps 1694-53 198.00Iris Adapter (see pg 27) 1694-54 294.00

Standard Air Lockhese air locks mount on the right side of theovebox to allow easy pass-through of parts into

nd out of the chamber. They feature a swing-downoor on the front (outside) and a second door that

easy to open by a gloved hand from inside theovebox. One-piece nonadhesive gasket enhances

ealing performance and extends service life. Cappedorts are provided to allow purging of the air lockith nitrogen. Right mounting is standard.

Type Series 100 Air Locks ** (each includes ports for nitrogen purging/bleeding)

SeeDimensions Above

Acrylic* Static DissipativePVC2

NondissipativePVC

Polypropylene3(Dissipative PVCviewing window)

Polycarbonate Stainless SteelWork Surface

(prevents scratching)


tandard Air Lock 1680-78B 383.00 1680-81B 584.00 1680-84B 473.00 1680-87B 490.00 1680-90B 415.00 1680-69 192.00

ass-Through Air Lock 1680-79B 440.00 1680-82B 644.00 1680-85B 484.00 1680-88B 546.00 1680-91B 467.00 1680-69 192.00

niversal Air Lock 1680-80B 446.00 1680-83B 653.00 1680-86B 490.00 1680-89B 553.00 1680-92B 475.00 1680-69 192.00Acrylic is damaged by alcohol and other cleaning agents. ** All are right mount chambers. Left mount chambers available.

Corresponding Options

Ionizing Bar

(see above)Fluorescent4

IlluminatorPower Strip5

110VAC/60HzDual Purge

System(see page 26)

NitroWatch

(see page 26)AutomaticRBValve(see page 26)

at. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

005-32 922.00 1681-78 415.00 1681-80 158.00 1603-57 2,715.00 Control: 9500-00A 866.00 1600-60B 94.00005-31 1,028.00 1681-79 561.00 1681-80 158.00 1603-57 2,715.00 Sensor: 9500-02A 515.00 1600-60B 108.00

4 Comes standard on polypropylene models. Models above are 110VAC/60Hz. Add -220 to the catalog number for 220VAC/50Hz power.5 Mounted horizontally on the inside rear wall, 3" from the bottom (specify other position, if desired).

Includes master on/off switch, 15-Amp circuit breaker and 4 outlets.



12/56

A

N

M

D

L

H

F I

8"

Series 200

Negative-PressureGloveboxes

Stainless steel door frames with uniquee profile elastomer gasket increasestructural rigidity, extend service life,improve sealing performance

See facing page for negativepressure configurations

No. 1681-15 with No. 1680-93 air lock

Optionalnegative-pressureair lock

Ideal for drying, degassing, andventilation applications

Clear construction (of acrylic

or polycarbonate) provides fullvisibility of work in progress

Sturdy construction allowssustained negative pressureoperation at 5" WG (29.9" Hg invacuum antechamber)

Vacuum safety valve included toprevent damage to walls or seals

These economical vacuum gloveboxes are designedfor degassing operations, chemical mixing,biological tests, and other processes requiringsustained negative pressure. Each chamber is

fabricated out of solvent-welded 12" transparentmaterial that combines full visibility with light weight,cleanliness and durability. Dual glove ports allow fullaccess to work in progress. Select acrylic for generalapplications, or polycarbonate for resistance to a widerange of chemicals and thermal stress. Equipped witha vacuum safety valve on a standard basis, thesechambers are designed for operations with sustainednegative pressures down to 5" WG (Water Gauge).Dual side access doors open inward to allow easyparts transfer from inside the chamber.

Optional Swing-UpFront Access Panel

Series 200 Negative-Pressure Gloveboxes Corresponding AccessoriesWith Front Access Panel* Without Front Access Panel Vacuum Antechamber

(12" Diameter, see photo below)Negative Pressure

Air Lock ***Acrylic** Polycarbonate Acrylic** Polycarbonate12"L 23"L Vacuum to 5" WG

at. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

681-13C 2,409.00 1681-14C 4,576.00 1681-15C 2,040.00 1681-16C 3,877.00 1681-63 2,769.00 1681-67 3,350.00 1680-93B 739.00* Cutout Size: 20"W x 10"H ** Acrylic is damaged by alcohol and other cleaning agents.

*** Right mount acrylic airlock. Other styles at TerraUniversal.com

Glove Ports A D F H I L M N

2 16.25 24 35 25 11.5 10 10 14

Other Options:ee gloves on page 26.

tainless Steel Work Surfacerotects the bottom of the chamber against scratching.rice includes installation.

Cat. # $/Each

r Air Lock 1680-69 192.00r Glove Box 1689-11 383.00

love Port CoversO-ring ensures a tight seal. Includes handle for easymoval.

Cat. # $/Each

ort Cover 1694-53 198.00

s Port Adapter 1694-54 294.00

Nominal Dimensions(inches).

or Process Gas

Port

Caps

Vacuum

Control

Pump

Vacuum Antechamber (ordering information above)

Allows drying or degassing at up to one full atmosphere (29.9" Hg).Vacuum Control Module See page 32 for full description. 110VAC, 50/60Hz Cat. # 1681-75 $/Each 2,610.00 220VAC, 50Hz Cat. # 1681-75-220 $/Each 2,610.00

Turnkey Connection Kit 110VAC Cat. # 5400-20 $/Each 1,451.00220VAC Cat. # 5400-20-220 $/Each 1,451.00

Vacuum Pump 110VAC, 50/60Hz Cat. # 7901-00 $/Each 2,411.00 220VAC, 50Hz Cat. # 7901-08 $/Each 2,179.00



13/56

A

N

M

D

L

H

F I

8"

Series 210

VacuumGloveboxes

1.5"-thick reinforced acrylic wallssupport full vacuum (to 29.9" Hg)

Dual hose barb fittings simplifyconnection to vacuum pump toallow rapid air removal and backfill

with clean, dry process gas

Perfect for anaerobic processing ina low-humidity nitrogen or argonenvironment

Select Trace Oxygen Analyzer tomaintain oxygen levels to 1 ppm

he Series 210 Glovebox supports a wide range ofacuum and degassing operations to full vacuum9.9" Hg).

his vacuum capability also allows removal ofmospheric humidity and oxygen and backll with

process gas, quickly providing a moisture-free,w-oxygen environment for applications as diverse

s Lithium battery manufacturing and anaerobicathogen studies.

or automated vacuum control, select the Vacuumontrol Module, pump and connection kit below. Forutomated backll and purging, select the Dual Purgeystem and Trace Oxygen Analyzer, which work inndem to provide oxygen levels down to 1 ppm(v).

he optional air lock allows transfer of materials into theovebox without breaching the controlled environment.

NominalDimensions

(inches).

Nominal Dimensions (OD includes external support ribs)

A D F H I L M NOD 16 29 32 29.5 12.75 12 11 17.33ID 14.69 22.13 30.25 22.75 10.83 10.13 9.13 13.63

eries 210 Vacuum Gloveboxcludes leveling feet, dual valves for connectionvacuum pump and backll gas source, pressure

auge and relief/bleed valve, which closes duringacuum operations. Order airlock gloves andacuum/purge controls separately.

Max Vacuum Cat. # $/Each

29.9" HG 3305-46 7,287.00

eries 210 Vacuum Air LockLeft Mount Right MountCat. # Cat. # $/Each

3305-48 3305-49 935.00

esigned to support 29.9" Hg vacuum, it includesual vacuum/gas valves and vacuum gauge.

acuum Controls See facing pageurge Controls/Oxygen Analyzer See pages 28 29

How to Attain Extremely Low RH/O2 Concentrations:Vacuum Cycling vs. Purge and Bleed

Vacuum cycling provides the quickest, most economical way to achieve extremely low moisture andoxygen levels inside a glovebox.

Purge-and-bleed displacement relies on a continuous purge of dry process gas (typically, nitrogenor argon) to displace moisture-laded air, which exits through a bleed valve. This process typicallyrequires many hours, consumes a high volume of process gas, and may never achieve very low oxygenconcentrations (below 5 ppm) required in many applications.

Vacuum cycling evacuates ambient airand with it, moisture and oxygeninside a vacuum chamberor glovebox. When air is removed, you simply backll the chamber with process gas until the chamberattains neutral pressure. If needed, this process is repeated until oxygen or moisture concentrationreaches the desired level. Typically, only a few cycles, requiring only a fraction of the gas and time of apurge-and-bleed protocol, are all thats needed to reach single-digit oxygen concentrations.

Once set point levels are attained, close off vacuum valves and use a Dual Purge System and appropriatecontroller (NitroWatch for relative humidity, Trace Oxygen Analyzer for O2 concentration) to maintaindry, anaerobic conditions.

See pages 32 33 for vacuum chambers

No. 3305-46 with airlockand accordion sleeve/glove combination

Front doors close toseal chamber duringvacuum cycles

Glove Portspecial designs and materials,cluding oval stainless steelorts and bag-out ports.

ee page 27.

No. 1672-07 No. 1672-10 No. 1672-27



14/56

Series 310

Stainless SteelNegative PressureGlovebox Designed for rapid removal of oxygen and backfill

with nitrogen or argon to establish anaerobicprocessing environment (see sidebar on page 11)

Continuous-seam welds with radius corners

simplify cleaning and reduce leak rate duringvacuum cycling

Optional vacuum controls accelerate oxygenremoval and backfill with inert process gas

Select Trace Oxygen Analyzer and Dual PurgeSystem to maintain oxygen levels to 1 ppm (seepage 28)

The Series 310 Stainless Steel Glovebox features reinforced 12-gaugestainless steel construction with continuous-seal welds to supportvacuum pressure/inert gas backll cycling that quickly removesatmospheric oxygen and moisture. A tempered safety glass window and

uorescent light provides visibility of the work area.For automated vacuum control, select the Vacuum Control Module,pump and connection kit below. For automated backll and purging,select the Dual Purge System and Trace Oxygen Analyzer, which workin tandem to provide oxygen levels down to 1 ppm(v). Right or left-sideair locks allow transfer of materials into the glovebox without breachingthe controlled environment.

No. 3305-54, shown with optionalmetering valves and vacuum gauge

10"

Nominal DimensionsA D E F G H I M N

6.56 24 28.25 35 11.75 28 28 14.75 14

Series 310 Negative Pressure Stainless Steel Glovebox (Tempered Safety Glass Window)Material With Right-Side Air Lock With Left-Side Air Lock With Dual-Side Air Locks

Cat. # $/Each Cat. # $/Each Cat. # $/Each

304 SS 3305-54A 15,990.00 3305-55A 15,990.00 3305-56A 19,972.00

316 SS 3305-60A 19,464.00 3305-61A 19,464.00 3305-62A 23,836.00

For 220V models, add -220 to the part number. Ordergloves, port covers, and vacuum/purge controllersseparately (full specications at TerraUniversal.com)

Cat. # $/Each

tand (powder-coated steel) 3305-66 510.00ort Cover 1694-53 198.00

ccordion Sleeve/Glove Combo (pair) 1689-47 296.00

Cat. # $/Each

Vacuum Valves (order two/chamber) 5235-09 160.00

Vacuum Gauge (order one/chamber) 5235-10 196.00Glovebox Vacuum Control Module 3305-67 Call TUI

Automates vacuum application to allow vacuum/purgecycling, allowing rapid moisture and oxygen removal.

Captair Pyramid Glovebox

for laboratory and field

investigations! Strong, reliable protection in a mobile and

disposable enclosure

Light simple structure allows for easy assembly Laboratory Certifiedtested for optimal air-

tightness

Top mounted O-ring piece makes for high

mobility and easy storage

The Captair Pyramid is a disposable isolation enclosure that provides excellentprotection in a mobile design.

The enclosure, base, and gloves are made of exible PVC and assembled by highfrequency welding to guarantee laboratory certied air tightness. Arm openingsare equipped with cuffs on arm sleeves for better rigidity during handlings andsupport rods maintain the enclosure upright during manipulations.

Each enclosure is factory tested by inating the enclosure with compressed airat 2.5mm Hg. Test certicate is provided with each enclosure along with serialnumber for traceability.

Cat. # $/Each

3015-00 355.00

Economy Glove BoxesWork

SurfaceSq. Ft.)

Description DimensionsL x W x H

inches (cm) Cat. # $/Each

3.3Glove Box w/ Pass Through,

1 x 134 x 25-7/8 x 24(86.4 x 65.7 x 61)

3308-13 1,575.00


2 x 152 x 25-7/8 x 24

(132.1 x 65.7 x 61)3308-14 1,800.00


3 x 1

70 x 25-7/8 x 24

(177.8 x 65.7 x 61)

3308-15 2,025.00

5.8Glove Box w/ Air Lock,

2 x 152 x 25-7/8 x 24

(132.1 x 65.7 x 61)3308-16 1,890.00

8.3Glove Box w/ Air Lock,

3 x 170 x 25-7/8 x 24

(177.8 x 65.7 x 61)3308-17 2,025.00

Economy Glove Boxes Clear polycarbonate has optimum

visibility and strength

Effective and affordable isolation

Ideal for anaerobic work (when

equipped with airlock) Available in several sizes with single

door, side-entry pass-through, ordouble door side-entry air lock1 x 1 Glove Box 3308-13



15/56

Shown with Glove Ports Cat. # 2003-37,$261.00/each. See page 20 for gloves.

Shown with Iris Ports Cat. # 1685-93,$421.00/pair. See page 19.

nterchangeable access ports let you configure theoptimal enclosure for your application

Solid Panels Access DoorsGlove Ports Microscope BellowsIris Ports Custom Interface Modules

hese Mini-Environment Equipment Enclosures provide a controlled

nvironment for delicate process equipment. Each includes dual frontoors for easy access. The bottomless design allows convenientlacement over equipment; select the optional spill tray if a bottom

s required. Standard size: 49"W x 25"D x 30.25"H (without lter/fanmodule). Door opening: 22.38"W x 22.25"H (for each door).

Mini-Environment

Equipment Enclosure

pill Tray

"H tray safely contains chemical spills and is easy to clean.Cat. # $/Each

ainless steel 2003-35 492.00olypropylene 2003-36 492.00

onizing Bar

ee page 25 for installation information

22"L (4 emitters) 2005-06A 484.0044"L (8 emitters) 2005-07A 696.00

Microscope Bellows Cat. # $/Eachee page 19; indicate desired location. 1681-53 234.00

apor-Sealed

luorescent Illuminator 2400-21 364.007"L x 5"W x 3"H; dissipative PVC housing. 120VAC, 60Hz. Otheroltages and special lighting available, including germicidal UV.

No. 2003-20 withoptional filter moduleand side doors.

Temperature-controlled modelsavailable in sizes up to 120"Wsee page 27.

Filter/Fan Units (120VAC,

50/60Hz)

Includes 99.99% efcient HEPAlter. Adds 13" to height. Exit

slots provided for air release.Cat. # $/Each

6601-24-H 730.00

Mini-Environment Enclosures Corresponding Side Access Door*Material

Cat. # $/Each

Right Side Left Side


Acrylic 2003-20 2,422.00 2003-25 240.00 2003-30 240.00

Static-Dissipative PVC 2003-21 3,142.00 2003-26 266.00 2003-31 266.00Polycarbonate 2003-22 3,217.00 2003-27 277.00 2003-32 277.00* Front access doors included (as in photos above). Side doors feature

stainless steel frame and chrome-plated lift latch. Opening: 15"W x 21"H

. Mini-Environment Equipment Enclosure: Incorporates closed-loopfiltration system.

. Mini-Environment Equipment Enclosure: Incorporates humidificationand dehumidification modules and process gas heater/cooler tomaintain stable %RH and temperature levels.

. Glovebox with Perforated Bottom: Accommodates recirculation offiltered process gas

. Polypropylene Glovebox: includes 0.5"-thick lead base and rearstorage shelves

. Glovebox with Recirculation System: FilterMate removes particles andvapors from recirculated, low-oxygen environment

C D E

A

Call to Discuss Your Unique Requirements!

B



16/56

Series 300

Stainless Steel GloveboxesProvides a clean, controlled environment for manufacturingprocesses in semiconductor, pharmaceutical, and otherindustries

Transparent dissipative PVC window affords full view ofprocessing area

Side flanges simplify insertion/removal of process

equipment and allow easy addition of ovens and air locks10"-diameter ports accept a wide variety of gloves andaccommodate port covers and iris adapters

Select single model (with two glove ports) or twin model(with four glove ports)

he Series 300 Stainless Steel Controlled Atmosphere Chamber provides aermetically sealed environment for such manufacturing operations as resistanceelding of semiconductor hybrids, parts degassing, temperature and humiditysting, and chemical mixing in a nonreactive environment.

DewWatch Humidity Controller (see page 26)

Air Lock

Glovebox Dual Purge System (see page 26)

4-Port Twin Chamber

(No. 1694-04B)

ass-Through OvenNo. 5401-00A;ee page 23)

Vacuum/Nitrogen Pump

Elastomer seal forsuperior performance

Air Lock Provides Convenient Access.Shown with optional viewing window.

See page 24.

Cleanroom ChairNo 1012-41$454.00

Cleaner, More Durable

Stainless Steel Latches

Terras all-stainless steel latches, standard on allglovebox air locks, eliminate scratching, corrosion and

contamination common with plated latches.



17/56

Stainless Steel Glovebox

Specifications & Ordering Informationoor Openings: 121/2" x 121/2" with gasketed doors

supplied with air locks (see orderinginformation below); doors open inward.

rm Ports: 10" round with ange for connectingglove assembly. See page 25

as Ports: Fittings for 1/4" gas inlet and systempressure lines; port for Automatic RBValve. Appropriate adapter inserts aresupplied for any Terra gas systemsordered.

ight: Fluorescent. (select voltage below)Window: Static-dissipative PVC

10"10"

10"

Stands for Series 300 GloveboxesConstructed of all-welded 2" square tubing. Select oven support for use with Terras High-Performance Pass-Through Oven(No. 5401-00, see page 23). All stands raise chambers 28.75" off of oor (add 3" for casters).

No. 1690-03

Other Optional Accessories

Cat. # $/Each Page

lovebox Dual Purge System 1603-57 2,715.00 23

itroWatch 9500-00A 866.00 26itroWatchSensor 9500-02A 515.00 26

tainless Steel Automatic RBValve 1606-60 180.00 26Required for operation with Dual Purge System

ccordion Sleeve/Glove Combination 1689-47 311.00 2418"L, with size 9 gloves (pair)

ight-Side Access Door 1685-94-300 902.00

eft-Side Access Door 1685-96-300 902.00

igh-Performance Vacuum OvenSee pg. 23 for specifications and ordering information.

All dimensionsin inches

Fans ensure evenon distribution.

IonBar (with fan module)Projects a balanced stream of positive ions forneutralization of static charges throughout a restrictedarea. Price includes installation inside specied

glovebox. Models below are for 120VAC operation.Cat. # $/Each22" Long 2005-30 816.0033" Long 2005-32 922.00

44" Long 2005-31 1,028.00

Powder-Coated Steel 304 Stainless Steel

Chamber Only Chamber and Oven Chamber Only Chamber and OvenCat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

For Single Models (2 ports) 1690-03 546.00 5401-01 882.00 1694-09 1,069.00 1694-11 1,614.00

For Twin Models (4 ports) 1690-04 663.00 5401-02 939.00 1694-10 1,308.00 1694-12 1,860.00

ModelGlovePorts A D E F G H I M N

Single 2 16.5625 24 28.25 35 11.75 28 16 14.75 14

Twin 4 16.5625 24 56.75 59 11.75 28 16 14.75 14

Cat. # $/Each

Heavy-Duty Casters (set of 4, 2 with brakes) 1700-44 234.00

Series 300 Gloveboxes* Corresponding Air Locks**

Model Glove Ports 120VAC 220VAC Right Side Left Side

Cat. # $/Each Cat. # $/Each Cat. # Cat. # $/Each

Single 2 1694-01B 5,802.00 1694-01B-220 5,802.00 1702-10C 1702-11C 3,206.00

Twin 4 1694-02B 8,998.00 1694-02B-220 8,998.00 1702-10C 1702-11C 3,206.00* 304 stainless steel with static-dissipative PVC viewing window

** Multiple air lock sizes available; see page 22

Plastic Glove Port, Cover, and Iris Adapter10"-diameter port is standard on all Terra gloveboxes. Order covers and irisadapter separately (see page 27).

Cat. # $/Each

A. Replacement Glove Port 1694-52 194.00 B. Glove Port Cover 1694-53 198.00

C. Iris Adapter 1694-54 294.00

A B C

Series 300

Oval and stainlesssteel portssee page 27.



18/56

Series 400

Stainless Steel Glovebox

Roomy 304 stainless steel chamber provides amplespace for large processing equipment

Interfaces with Vacuum Antechamber for vacuumoperations down to 29.9" Hg

Optional gas purge controls automatically maintain ahumidity set point down to 0% RH/0.5 ppm(v) H

2O

hese chambers are a larger version of the Series 300 chambers listed on theeceding pages.

addition to all of the features of the Series 300 models, these chambers alsocommodate Terras Vacuum Antechamber, which supports vacuums down29.9" Hg for a wide range of operations in many industries. Their double-

asketed side ange allows easy insertion of large process equipment into theork chamber and easy mounting of the antechamber, a vacuum/nitrogen oven,a standard air lock.

pecifications: Series 400 Gloveboxoor Openings: 12" x 12" gasketed doors supplied with air locks

(see ordering information on facing page); doors open inward.

m Ports: 10" round with ange for connecting glove assemblyindows: Static-dissipative PVC

Specifications: Vacuum AntechamberConstruction: 6061 Aluminum (with brass ttings); or stainless steel (with

stainless steel ttings); high-vacuum design; TIG weldedstructure

Dimensions: 15" dia. x 24" longTray Dimensions: 12" x 23"; extends to 14" beyond opening for loadingDoors: Single center-clamped, O-ring sealed, counterbalanced,

vertical travel; stainless steel on both modelsVacuum Capability: 1 x 10-3 TorrVacuum Gauge: 21/2" compound Bourdon tube dial typeConnections: 1" evacuation valve, 1/4" backll valve, 1/4" IPS plug

Elastomer seal forsuperior performance

Order Air Locks fromtable on the next page

Model shown: Single Chamber (Cat. No. 1694-13) with Dual Purge System, Vacuum Antechamber and Vacuum Control Module

Dual Purge System

VacuumControlModule

Vacuum Antechamber

Series 400 Chambers (304 Stainless Steel)Model Glove Ports Cat. # $/Each

Single 2 1694-13B 9,529.00

Twin 4 1694-14B 14,776.00



19/56

H

F I

E

G AirLock

10"10"

A

M

D

M

H

F 24"

E

G

15"

Vacuum

Antechamber

10"

All models include a 120VAC/60Hz fluorescent illuminator.For 220VAC/50Hz power, add -220 to the catalog number.For electropolishing of any stainless steel component, add-2 to the catalog number and 30% to the price.All dimensions in inches.

tands for Series 400 Gloveboxesonstructed of all-welded 2" square tubing, theseands are specially designed to support Series 400oveboxes. Select powder-coated (white) steel orainless steel stands, with or without rubber casters.

eavy-Duty Casters Cat. # $/Eachet of 4, 2 with brakes) 1700-44 234.00

Other Optional Accessories

For chamber only

For chamber and vacuum

antechamber

For chamber and oven No. 5401-00

For chamber, vacuum antechamber,

and oven No. 5401-00

Cat. # $/Each Page

lovebox Dual Purge System 1603-57 2,715.00 23

itroWatch 9500-00A 866.00 23itroWatchSensor 9500-02A 515.00 23

tainless Steel Automatic RBValve 1606-60 180.00 23Required for operation with Dual Purge System

ccordion Sleeve/Glove Combination 1681-91B 269.00 2018"L, with size 9 gloves (pair)

IonBar (with fan module)Projects a balanced stream ofpositive ions for neutralization ofstatic charges throughout a restrictedarea. Price includes installationinside specied glovebox. Modelsbelow are for 120VAC operation.

Fans ensure evenion distribution.

Plastic Glove PortStandard on all Terra gloveboxes; can be retrotted onchamber with 11.25" dia. cutouts. Price for single port.

Cat. # $/Each

1694-52 194.00Port Covers 1694-53 198.00Iris Adapter 1694-54 294.00

Bag-In/Bag-out Ports See page 4

Cat. # $/Each

22" Long 2005-30 777.0033" Long 2005-32 878.0044" Long 2005 -31 979.00

Glove Ports A D E F G H I M N

2 27 33 28.25 33 12.9325 33 16 12 14

4 27 33 56.5 60 12.9325 33 16 12 14

Vacuum Antechamber (see below) Air Lock** Vacuum/Nitrogen Ovens (left side mounting standard)

Aluminum** Stainless Steel** High Performance Pass-Through Oven* (see pg. 23)

Modular Oven(see pg. 23)

ight Mount Left Mount Right Mount Left Mount Right Mount Left Mount Right Mount Left Mount Right Mount Left Mountat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each

5400-01 5400-03 6,689 5400-04 5400-05 8,206 1698-01C 1698-02C 2,989 5401-12A 5401-00A 17,268 9602-30A 9602-03A 5,564* Requires support stand for safe operation (order below). For 220VAC operation, add -220 to the part number.

** Prices for left-mount and right-mount models are the same. Optional 7"W x 9.5"H safety glass viewing windowCat. # 1702-02

304 Stainless Steel Powder Coated Steel 304 Stainless Steel Powder Coated SteelCat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

For Single Models (2 ports) 1694-15 1,204.00 1694-17 546.00 1694-19 1,760.00 1694-21 818.00

For Twin Models (4 ports) 1694-16 1,279.00 1694-18 611.00 1694-20 1,872.00 1694-22 367.00

304 Stainless Steel Powder Coated Steel 304 Stainless Steel Powder Coated SteelCat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

For Single Models (2 ports) 1694-23 1,988.00 1694-25 965.00 1694-27 2,422.00 1694-29 1,236.00

For Twin Models (4 ports) 1694-24 2,103.00 1694-26 1,013.00 1694-28 2,707.00 1694-30 1,275.00

Other designssee page 27



20/56

Series 500

Full-ViewGlovebox

Transparent front and rear panelsensure full visibility of work inprogress

Opposing glove ports allow

convenient, dual-side access Large chamber size accommodates

bulky process equipment

Rugged 304 stainless steel top,bottom and sides create a durable,chemical-resistant enclosure

Select access doors or air locks toallow convenient parts transfer

The Series 500 Glovebox offers several convenientfeatures that reduce the cramped, claustrophobicfeeling operators often experience: a spacious

processing chamber, transparent full-view windows,and dual-side access to work in progress.

Select windows of polycarbonate or static-dissipativePVC, which helps control surface charges and theparticles they attract. All models below include anexternally mounted uorescent illuminator. Terras10" -diameter glove ports allow wide arm motion foreasier parts manipulation; select gloves separately.Available with a full line of options, including side airlocks or access doors for easy parts transfer, stands,and humidity control systems (see below).

Twin Series 500 chambers.

Glove A D E F H I M N

2 26 36 14.75 48 30 16 14.75 12

4 26 36 14.75 96 30 16 14.75 12

A

M

D

E

H

F I

N

17"

10"

eries 500 Full-View Gloveboxes* Air Locks** Access Door***Model Static-Dissipative

PVC PanelsPolycarbonate

PanelsRightMount

LeftMount

RightMount

LeftMount

Cat. # $/Each Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each

Single 1694-31A 7,006.00 1694-33A 6,805.00 1702-12C 1702-13C 3,206.00 1694-45-500 1694-46-500 902.00Twin 1694-32A 12,959.00 1694-34A 10,752.00 1702-12C 1702-13C 3,206.00 1694-45-500 1694-46-500 1,073.00

* All models are 120VAC, 50/60Hz. For 220VAC, add -220 to the part number.** Mounted on either side panel; see page 22 for details.

*** Mounted on either side panel; 18"W x 20"H.

StandsAll-welded 2" square tubing, each stand providesoptimal support for its corresponding chamber.

Optional Accessories (see also facing page)

Air LocksAir locks minimize nitrogen loss andcontamination while parts are introducedor removed. BioSeal design featuresnoncontaminating polyurethane seals.Standard units on ordering chart abovecome with solid stainless steel door(select window below).

Cat. # $/Each

Viewing Window 1702-02 442.00Tempered Glass, 7"W x 9.5"H

Stainless Steel Powder-Coat SteelCat. # $/Each Cat. $ $/Each

For Series 500 ChambersSingle 1694-39 1,919.00 1694-40 1,142.00Twin 1684-75 2,007.00 1684-76 1,217.00

For Series 600 Chambers 9670-02 1,256.00 9670-03 576.00



21/56

Polycarbonate or tempered glassfront window allows full view ofprocessing operations

Stainless steel frame lends strengthand chemical resistance

Select access doors or air locks forconvenient parts transfer

Full range of optional accessoriesincludes gloves, filtration modulesand process gas controllers forautomatic humidity control

ull-front viewing windows on these chambers provideomplete visibility of the processing environment andinimize the claustrophobic sensation created by otheroveboxes. Select chemical-resistant polycarbonater tempered glass; all units come with a uorescent

uminator and roomy 10"-diameter glove ports (orderoves separately).

Series 600

Front-ViewGlovebox

No. 9670-00, shown with right-side air lock.

A

M

D

E

H

F I

N

17"

10"

Optional Accessories (see also facing page)

Series 600 Full-View Gloveboxes* Air Locks** Access Door***

TemperedGlass Panels

PolycarbonatePanels

RightMount

LeftMount

RightMount

LeftMount

at. # $/Each Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each

9670-01A 10,023.00 9670-00A 8,719.00 1702-14C 1702-15C 2,989.00 1694-45-600 1694-46-600 1,073.00* All models are 120VAC, 50/60Hz. For 220VAC, add -220 to the part number.

** Mounted on either side panel; see page 22 for details.*** Mounted on either side panel; 18"W x 20"H.

Sleeve and Glove

Combination

Neoprene convoluted sleeveprovides rigidity that enhancescomfort and resists blowback in apressurized chamber. Supplied withone pair of nitrile gloves of speciedsize. For 10"-diameter glove ports.See page 26 for other gloves.

Glove Size Cat. # $/Pair

8 1689-46 310.00

9 1689-47 311.0010 1689-48 312.00

RH/Temperature Data

Logger

USP device provides a convenient recordof storage conditions. Records data atselected intervals and downloads tocomputer for display in several formats.

Cat. # $/Each

9500-10 195.00

See pages 28 29 for TerrasHumidity Control Systems

Glove A D E F H I M N

2 24 29 12 37.5 39 16 12 14

Now with10"-diameterports for widerrange of motion!

Optional portcover sealsagainst standardport to allowconvenient glovereplacement withoutcompromising theinternal environment

Optional iris portseals againststandard port foreasy access byoperators withgloved hands

See stands on facing page.

t. # $/Each

694-53 198.00

t. # $/Each

694-54 294.00



22/56

Compounding

Aseptic IsolatorHelps meet USP requirements

Low-noise, low-vibration filter/fan unit providescontinuous vertical flow of 99.99% particle-free air tomeet Class 100 (ISO 5) cleanliness standards

304 Stainless steel enclosure is easy to clean anddisinfect (see Cleaning Kit on facing page)

Large, ergonomically sloped static-dissipative PVCviewing window tilts open to allow insertion of fillingmachines or other large process equipment

Antechamber features swing door for easy insertion/removal of IV bags and other small items

Magnehelicgauge monitors internal positive pressureinside the enclosure that prevents infiltration ofcontaminants

Includes IV rod and externally mounted fluorescentilluminator

Waste port available for disposing of materials throughglovebox floor or side

Includes IV rod

Swing-upaccess doorand isolatedantechamber

Single-pass flow-through design

Gloves See page 26

his laminar ow glovebox provides an easy-to-clean environment for performingerile pharmaceutical preparations. Its HEPA ltration module provides aositive pressure of 99.99% particle-free air inside the work area to meet ISO 5quirements. A separate antechamber allows introduction of materials without

ontaminating the main work area. Includes polyurethane exit lter (HEPA exitter available). Select gloves for 10"-diameter ports from page 26. Material: 304ainless steel with tempered glass window. Dimensions: 50"W x 30"D x 51"H.

Cat. # $/Each

ompounding Aseptic Isolator 2900-46C 6,819.00orresponding Stand

304 Stainless Steel 1694-80 1,036.00

V-RAY Ultra-Violet Sterilization Modules

Economical, fast-acting systems use UV-C light to kill a broadspectrum of bacteria, viruses, and mold spores (details atTerraUniversal.com)

An effective, convenient alternative to manual alcoholsterilization of difficult-to-reach isolator interiors

Three lamp sizes (21", 33" and 61") accommodate mostaseptic isolators

Can be permanently mounted or installed with quick-connectfittings when sterilization is required

These economical, ETL-listed sterilization modules are ideal for glovebox isolators andother conned, difcult-to-clean chambers. Their long-lasting, low-mercury lamps canbe installed in most Terra stainless steel chambers, including BioSafe Gloveboxesand Compounding Aseptic Isolators. Call for pricing on a mounting system that

accommodates your operation. Cat. #21" lamp 3305-9033" lamp 3305-91

61" lamp 3305-92

99+% kill rate for common bacteria andviruses within 2 minutes!

See facing page for Mini-Environment

Cleaning Kitideal for alcohol disinfection.Hydrogen peroxide sterilization systemsalso availablecall Terra for congurations.



23/56

Mini-Environment

Cleaning KitsThe kits include an Isolator Cleaning Tool(18" and 24" handles, 1 polyester foampad, and 6 mop covers), one productionbag of dry and pre-wetted wipers and aninformational brochure with instructions on

how to clean your isolators.

BioSafe

Gloveboxes

Smooth, ultra-clean surfaces eliminate germ traps,simplify cleaning and disinfection

Continuous-seam interiors create a sealed chamber

Tempered glass or polycarbonate viewing windowsallow full view of chamber

Includes fluorescent illuminator (UV sterilization bulbsavailable)

Optional access panel available for equipment transfer

Custom configurations availablecall to discuss yourrequirements!

Smooth interior withradius corners for easysterilization!

Available withsloping bottomand drain valvefor disinfectantwash-down

Rating Cat. # $/Each

ISO Class 3-5 5604-65 198.00

BioSafe Glovebox All models are 120VAC; 220VAC models availablePosition Window

Material304 Stainless Steel 316 Stainless Steel

Single

(37.5"W x 29"/24"D x 39"H)Twin

(69"W x 29"/24"D x 39"H)

Single

(37.5"W x 29"/24"D x 39"H)Twin

(69"W x 29"/24"D x 39"H)

Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

Glovebox with Right-Side Air Lock*Polycarbonate 9670-16B 18,764.00 9670-19B 23,750.00 9670-48A 26,417.00 9670-51A 33,497.00

Safety Glass 9670-17B 19,920.00 9670-20B 24,892.00 9670-49A 28,065.00 9670-52A 35,060.00

Glovebox with Left-Side Air Lock*Polycarbonate 9670-22B 18,735.00 9670-25B 23,785.00 9670-54A 26,417.00 9670-57A 33,497.00


Glovebox with Dual-Side Air Locks*Polycarbonate 9670-28B 23,495.00 9670-31B 28,711.00 9670-60A 33,288.00 9670-63A 40,368.00


* Air lock dimensions: 16"W x 16"D x 16"H

ach chamber includes pair of 10"-diameter glove ports (twin models includewo pairs). Order gloves separately on page 26.

For Single For TwinCat. # $/Each Cat. # $/Each

owder-Coat Stand 9670-41 597.00 9670-43 715.00

tainless Steel Stand 9670-40 1,256.00 9670-42 1,378.00

emovable Panel

lows you to remove and reseal front viewing window to allow transfer of largeocess equipment. Poured polyurethane BioSeal is easy to clean and sterilize.

Cat. # $/Each

Single Chamber 9670-35 2,625.00Twin Chamber 9670-36 3,150.00

Shown with optionalfiltration module(see page 31)

Ideal for hard-to-reachinterior surfaces!



24/56

nsulated

Gloveboxes2" of polyurethane insulation ensurestable, efficient temperature controlover a wide operating range (-25F to+140F/-32C to +60C)

Provide stable operating temperaturesin critical applications

304 stainless steel chamber provides anoncontaminating, durable, chemical-resistant enclosure

Double-glazed polycarbonate viewingwindows provide visibility of work inprogress (select partial or full-viewdesign)

Includes fluorescent illuminator

See facing page for Terras ConstantTemperature Control System

hese double-wall, insulated chambers boost thermalciency to create stable process temperatures andecrease the cost of heating and cooling cycles.

oth include two 10"-diameter ports, providingmple space for arm motion inside gloves (orderoves separately). Select Full-View or Partial-Viewont panels. Both models include double-glazedolycarbonate windows.

10"

Outside Dimensions (subtract 4" for I.D.)Front Panel A D E F G H I M NFull Window 28 33 37 41 35 43 14 12 Partial Window 31 37 28.25 37 12.81 39 14 12 14

Special sizing and configurations available call to discuss your requirements.

nsulated Gloveboxes Air Lock* Stands

Window 120VAC 220VAC Right Side Left Side

Cat. # $/Each Cat. # $/Each Cat. # Cat. # $/Each Cat. # $/Each

ull Window 1696-05 14,102 1696-05-220 14,102 1696-07A 1696-08A 2,853 1696-11 590.00

artial Window 1696-06 14,459 1696-06-220 14,459 1696-09A 1696-10A 2,853 1696-12 569.00

* Air locks feature double-wall constructions but no insulation. Inside dimensions: 12" x 12" x 12"Order desired gloves and temperature control module separately.

Partialwindowmodel

Fullwindowmodel

Plastic Glove Port, Cover, and Iris Adapter10"-diameter port is standard on all Terra gloveboxes. Order covers and irisadapter separately.

Cat. # $/Each

A. Replacement Glove Port 1694-52 194.00 B. Glove Port Cover 1694-53 198.00

C. Iris Adapter 1694-54 294.00

A B C



25/56

Heating & Cooling

Modules

Continuous Low Flow

Intermittent High Flow

Insulated Linefor Heated Gas

N2 InProcess

Gas Heater

GasOut

DualPurge

NitroWatch

Double-Wall, Insulated Chamber

B

B. Process Gas Heatererra Universals Process Gas Heater raises the temperaturethe process gas up to 350F (see performance graphs).

he thermostatic control ensures temperature stability. Itsolated heating system provides controlled heating withoutrect contact with the process gasguaranteeing safe,oncontaminating operation with potentially explosiveases. The smart programmable temperature controller

onitors and responds to gas temperature measured ate outlet, continuously adjusting the temperature proled guarding against temperature overshoot.

Cat. # $/Each

20VAC/60Hz 4320-00 3,574.0020VAC/50Hz 4320-00-220 3,574.00

A. Constant Temperature

Control SystemMaintains a constant temperaturebetween -25F and 120F (-32Cand 49C)

Includes CFC-free refrigeration

system and heating module

Select insulated chambers forenergy-efficient temperaturecontrol above or blow ambient(see facing page)

his system consists of compressor/condenser unitd heater, mounted inside a 304 stainless steel

ousing, and an evaporator cooler, mounted insidee chamber. The closed-loop refrigeration unitperates with an environmentally friendly coolantFC free) and uses a RTD sensor, which providesntinuous temperature display and overtemperatureotection with an internal bypass to preventmperature overshoot.

he systems evaporator cooler, mounted in anuminum housing, includes an integral fan thatcirculates process gas inside the chamber throughe cooling coils. Standard controller allows user totablish a constant temperature set point. A PLCntroller, programmed for multiple temperaturecles, is available on an optional basis.

Constant Temperature Control SystemTemperature

RangeCompressor

SizeBTU/HourCapacity

110VAC, 50/60Hz 220VAC, 50/60HzCat. # $/Each Cat. # $/Each

-10 to 120F 0.5HP 3800 1694-76 15,120.00 1694-76-220 15,120.00-25 to 120F 0.75HP 5900 1694-78 18,270.00 1694-78-220 18,270.005 to 120F 0.5HP 3800 1694-75 14,070.00 1694-75-220 14,070.005 to 120F 0.75HP 5900 1694-77 17,220.00 1694-77-220 17,220.00

Shown on Series 300glove box. See facingpage for insulatedchambers.

Chilled Purged Gas

DualPurge

NitroWatchN2 In

Continuous Low Flow


Closed-Loop,CFC-Free Coolant

Double-Wall, Insulated Chamber

Refrigeration

Module

Application Note:Dry nitrogen purgingis recommended for low-temperatureapplications in order to avoid condensationinside the process chamber.

Glove Portspecial designs and materials,cluding oval stainless steelorts and bag-out ports.

ee page 27.

No. 1672-07 No. 1672-10 No. 1672-27



26/56

Stainless Steel

Air Locks

Pneumatic Door

Air Locks

Optional mechanicalinterlocks:

Cat. # 1702-03, $460

Cleaner, More Durable

Stainless Steel Latches

Terras all-stainless steel latches,standard on all glovebox airlocks, eliminate scratching,corrosion and contaminationcommon with plated latches.

Shown with optional7"W x 912"H tempered glass viewing

window (Cat. # 1702-02, $421)

Elastomer seal for superior performance

Shown with custom rear-wall installation

Foot pedal operation eliminatesawkward reachingperfect for largechambersThis pneumatic access door eliminates clearancerequirementsgiving you full use of every squareinch of valuable glovebox space. The pneumaticassembly and all moving parts are positioned outsidethe glovebox in a separate housing. Can be conguredfor rear chamber access or air lock access.

Door sealed in housingoutside chamber

Glovebox Air Locks*

Dimensions (ID): 12"W x 12"H x 14"D 12"W x 12"H x 16"D 16"W x 16"H x 16"D 12"W x 20"H x 16"D

RightMount

Left Mount RightMount



Left Mount

or Glovebox Cat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each

Series 300 (page 12) 1702-10C 1702-11C 3,206 1681-17C 1681-18C 3,456

Series 400 (page 14) 1698-01C 1698-02C 2,989 1681-19C 1681-89C 3,456 1702-18C 1702-19C 4,591 1702-37C 1702-38C 3,914

Series 500 (page 16) 1702-12C 1702-13C 3,206 1681-93C 1681-94C 3,456 1702-31C 1702-32C 4,591 1702-39C 1702-40C 3,914

Series 600 (page 16) 1702-14C 1702-15C 2,989 1681-95C 1681-96C 3,456 1702-33C 1702-34C 4,591 1702-41C 1702-42C 3,914Part numbers are for an air lock of the specied size with a ange for right or left mounting to the Terra glovebox indicated.(No part numbers in a column indicates that the air lock does not t that glovebox).

Air Lock with Pneumatic Door

Corresponding Glove-box

Right Side Left Side


For Series 300 Chamber 1530-70 6,878.00 1530-74 6,954.00




Smooth internal surfaces and all-welded seamsfor easy cleaning and disinfection

No-lip design maximizes usable space

Non-contaminating polyurethane Bio-Seal

Terras improved air lock design ensures a sealed environment that

minimizes nitrogen loss and contamination. Knife-edges alongthe chamber seat against recessed polyurethane seals. Double-wall stainless steel construction, with heavy-duty door latches andhinges, ensures a long service life.

Select optional safety glass viewing window on the access side.Mechanical interlocks are also available to prevent the chance ofcross-contamination. Includes provisions for purging with nitrogenor other process gas, and for installation of an Automatic RB(Relief/Bleed) valve.



27/56

Pass-Through Ovens &

Access Modules

A. High-Performance Pass-Through Oven

eatures double doors for such pass-through operations as resistanced seam welding of hybrids and many other microelectronic

ackages. Door anges hold circulating water to speed up theoling of the chamber during cycling operations. These ovensquire a support platform when mounted on a chamber; select a

erra stand with oven support. Select ttings kit for operation withull-Vacuum Control Module.

emperature range: Up to 300C continuous, 350C intermittentegree of vacuum: Up to 10-6 Torr and higher; helium mass

spectrometer tight

Right Mount Left MountCat. # Cat. # $/Each

0VAC/60Hz 5401-12A 5401-00A 17,268.000VAC/50Hz 5401-12A-220 5401-00A-220 17,268.00cuum Control Fittings Kit 5400-22 1,451.00rder Vacuum Controller below)

B. Modular Vacuum/Nitrogen Ovenhis unit provides a compact, economical alternative to Terras largeracuum/Nitrogen Oven. It is ideal for R&D, lab, and productionperations.

acuum range: Atmosphere to 10 microns, with adequate pumpemperature range: 10C to 149Capacity: .48 cu. ft.

Right Mount Left MountCat. # Cat. # $/Each

0VAC/60Hz 9602-30A 9602-03A 5,564.000VAC/50Hz 9602-30A-220 9602-03A-220 5,564.00

cuum Control Fittings Kit 5400-23 1,451.00rder Vacuum Controller below: see page 27 for description.)

C. Vacuum Control Module

ontrols vacuum pump operation to maintain desired vacuum levelside the Series 400 vacuum antechamber or pass-through oven.ee page 16.

Cat. # $/Each

0VAC 1681-75 2,610.00

0VAC 1681-75-220 2,610.00

D. Vacuum Antechamberupports vacuum to 29.9" Hg. Available in plastic for Series00 Glovebox (see page 10) and aluminum or stainless steel foreries 400 Glovebox (see page 16).

. Bellows Eyepiece Interfacehis cut-out is sealed with a bellow-type diaphragm to allow viewing

a stereo microscope positioned inside any of Terras stainlesseel gloveboxes. Standard cut-out size is 8"W x 6"H. Specify sized location.

Cat. # $/Each

1681-53 234.00

. Flanges and Pipe Fittings

erra provides a wide range of pipe and ange ttings, includingi-Clover Flange Adapters, to accommodate glovebox feed orntilation ports. Call to discuss your requirements. Weld-On and Bolt-On Configurations, all diameters

304/316 SS, brass and other materials PTFE and other linings

Heating to 300C

Heating to 149C,see TerraUniversal.com

for other sizesA B

C D

G. Tilt-Up Viewing ModuleSwings open for easy access. Dual piston mechanisms hold the window securely in open. Priceincludes modication of plastic or stainless steel glovebox. Frame is stainless or powder-coatsteel; window is static-dissipative PVC. Must be ordered together with affected glovebox.

Single Chamber Twin Chamber

Glovebox Material Cat. # $/Each Cat. # $/Each

Plastic: SS frame 3305-20 1,943.00 3305-21 2,363.00

Plastic: powder-coat frame 3305-22 2,258.00 3305-23 2,678.00Stainless Steel 1684-92 1,875.00 1684-93 2,155.00

E F

G



28/56

B. Heavyweight Nitrile GlovesThese heavy-duty nitrile rubber gloves provide unusual durabilitywhile maintaining optimum levels of form, t and function. Resistsa wide-range of chemicals, including solvents.

A. Accordion Sleeve and GloveThese accordion sleeves, made of neoprene, can be used forany size and type of gloves. The convenient two-piece designlets you change glove sizes and types for different operators orapplications without the expense of changing the sleeve itself.The corrugated section keeps the sleeve off the operators arm for

better air circulation and greater comfort. Includes nitrile gloves.Glove Thickness: 18 mil.

GloveSize

18" Sleeve, 12.75" gloveCat. # $/Pair

8 1689-46 310.00

9 1689-47 311.00

10 1689-48 312.00

Gloves & Sleeve

Combinations

D. Nitrile Sleeve and GloveTwo-piece units provide the convenience of quick glovereplacement. Sleeve has G.U.S. (glove-under-sleeve) connectorsto air-tight, liquid-tight seal. Unlined.

A B

C D

E F

One-PieceFully-Dipped Glove

HandSize

Lightweight (.015") Heavyweight (.030")Cat. # $/Pair Cat. # $/Pair

9 1671-15 316.00 1671-16 362.00

E. Neoprene Gloves for 10"-diameter ports

HandSize

One-Piece BondedNeoprene Dry BoxGlove

Neoprene Gloves 13"long, unlined texturedgrip

Neoprene SleeveSections 22" long

Cat. # $/Pair Cat. # $/Pair Cat. # $/Pair

8 1689-53 212.00 1670-83 18.00 1690-92 188.00

9 1689-55 212.00 1670-84 18.00 with G.U.S. connectors(see above)10 1689-56 212.00 1670-85 18.00

F. Hypalon Gloves for 10"-diameter ports

Hand Size

One-Piece Fully-Dipped HypalonDry Box Glove

Hypalon Gloves14" long, unlinedtextured grip

Hypalon SleeveSections22" long

Cat. # $/Pair Cat. # $/Pair Cat. # $/Pair

8 1671-05 79.00 1671-18 353.00

9 1671-17 318.00 1671-06 79.00

10 1671-07 79.00

All models for 10"-diameter ports

HandSize

Nitrile Gloves13" long

Nitrile Sleeve22" long

Cat. # $/Bag Cat. # $/Pair

8 1670-13 67.00 1670-17 133.00

9 1670-14 67.00 Sleeve has G.U.S.

10 1670-15 67.00 Connector (see above)

Glove

Size

13" Sleeve

Cat. # $/Pair8 1671-50 6.00

9 1671-51 6.00

10 1671-52 6.00

E. Neoprene Sleeve and Glove

Select one-piece bonded or two-piece sleeve/glove

combinations. Two-piece units provide the convenience ofquick, easy glove replacement while leaving the sleeves attachedto the glovebox. Sleeve and glove are joined by a Glove-Under-Sleeve (GUS) connector, which ensures an air-tight, liquid-tightseal and protection against hazardous materials. Length: 30"total (22" sleeve only, tapering to a 4"-diameter cut-off). Sleevethickness: 0.030" - 0.040".

F. Hypalon Sleeve and GloveSelect one-piece fully-dipped glove or two-piece sleeve/glovecombinations. Two-piece units provide the convenience ofquick, easy glove replacement while leaving the sleeves attachedto the glovebox. Sleeve and glove are joined by a Glove-Over-

Sleeve (GOS) connector, which ensures an air-tight, liquid-tightseal and easy glove changeout. Length: 32" total (22" sleeveonly, tapering to a 4"-diameter cut-off). Sleeve thickness: 0.015".

C. Butyl Sleeve and GloveTextured grip improves dexterity. Length: 32".

Shown: One-piecemodel availablefor 8"-dia. ports



29/56

Glove &

Iris Ports

Specialty

Glove Ports

10"-diameter ports, standard on all Terragloveboxes, allow ample arm motion

Internal mounting system accepts portcaps or iris ports, which seal against theport frame to expand glovebox versatility(order caps and iris ports separately)

Versatile Three-Part Systemerras standard 10"-diameter glove ports, made of ABSastic, accommodate all the gloves on the facing page. Theirrsatile internal mounting hardware allows you to expandstem capabilities by adding either port covers or iris ports.

ort covers include an O-ring that seals tightly against theove ports from the inside of the chamber. This internal-ount system lets you seal a chamber when work is not inocess, and to replace gloves without affecting the internal

nvironment. Handles allow easy manipulation of the caps.

s ports also mount against the ports from the inside, converting

e chamber into an easy-access, non-sealed chamber thatperators can access using standard laboratory gloves.

eplacement Glove Portequired for either caps or iris ports. Included standard on allrra gloveboxes. Price is for one port.

New larger-diameter ports provide a wider range ofmotion to improve comfort and productivity!

Optional port cover seals against portto allow glove replacement without

compromising the internal environment

Optional iris port seals against port for easyaccess by operators with gloved hands

Round or oval, in 304/316 stainless steel, PVC,polypropylene, and more

Custom materials and configurations, including Delrinports and Viton or Buna-N O-rings: TerraUniversal.com

Port CoverMounts to a standard 10"-diameter

port. Price is for one cover.Cat. # $/Each1694-53 198.00

Iris PortIncludes iris port and port retaining

ring. Mounts to standard 10"-diameterport. Price is for one iris port.Cat. # $/Each

1694-54 294.00

Cat. # $/Each

1694-52 194.00

No. 1672-07 No. 1672-10 No. 1672-27 No. 1694-43

04 Stainless Steel Ports316L pharmaceutical-grade SS also available)Diameter Round Oval


8" 1672-05 417.00

9" 1672-06 562.00 1672-10 781.00

10" 1672-07 700.00 1672-11 838.00

12" 1672-08 815.00 1672-12 896.00

PVC PortsDiameter Round

Cat. # $/Each

6" 1672-15 211.00

8" 1672-16 223.00

10" 1672-17 247.00

12" 1672-18 271.00

Polypropylene PortsDiameter Round Oval


6" 1672-21 271.00

8" 1672-22 295.00 1672-27 223.00

10" 1672-23 301.00

12" 1672-24 319.00

Bag-Out Port Cat. # $/Each9" diameter. Other sizes available. 1694-43 260.00Bags: Package of 10 12-mil PVC bags for 9" port 1694-44 104.00



30/56

Economizes on nitrogen consumption up to 78%

Extends shelf lives of stored materials bycontrolling moisture and moisture-related defects

DewWatch: Humidity Monitor & Control(Dual Purge System, RB valve required)

Typical application with NitroWatch/DualPurgehumidity controllers (not included)

egeneration Module

ainless Steel Enclosure

Fan

atalyticonverter

MolecularSieves

Controller

DryCyclerPerformance,

based on an 18cu. ft. glovebox

Controls

For StainlessSteel Enclosures

Cat. # $/Each

1606-60 180.00For PolymerEnclosures Cat.# $/EaCh

1600-60B 94.00

A. Dual Purge SystemPurges a glovebox with dry process gas to maintain acontinuous positive pressure that blocks out moistureand contaminants. Switches to high-ow purge tocompensate for pressure drop-outs or rising humidity

levels. Requires RB valve for safe operation.

110VAC, 60Hz or Cat. # $/Each220VAC, 50Hz 1603-57 2,715.00High-Flow System 1603-58 3,030.00

For rapid purge requiredin low-O2 chambers.

B. NitroWatchOperates in tandem with the Dual Purge System to

maintain user-determined humidity level (down to 0%RH).Cat. # $/Each

Control Unit 9500-00A 866.00Humidity Sensor 9500-02A 515.00

C. DewWatch Hygrometer

A high-performance alternative to the NitroWatch,

this unit monitors and displays dew/frost pointsbetween -80 and +20 degrees C. Sensor is sensitiveto 0.5 PPM(v) of moisture.

Cat. # $/Each

Control Unit 1401-07 3,240.00Sensor Probe 1401-12 1,589.00

D. Trace Gas Mixer

Assures accurate gas mixtures. Model shown featurestwo ow channels of specied ow.

Cat. # $/Each

2-20/2-20 2701-00 510.002-20/5-50 2702-00 527.005-50/5-50 2703-00 543.005-50/10-100 2704-00 511.00

E. DryCycler Regenerating

Gas DryerQuickly provides an ultra-low humidity level (down to 1ppm of water vapor) inside a glovebox or other enclosure.A humidity controller activates the dehydration moduleto maintain humidity set point.

Cat. # $/Each

6706-01 15,061.00

F. Automatic RB (Relief/Bleed)

Valve

Automatically relieves pressure build-ups to ensure safeoperating conditions with Terras gas control systems.

Process Gas & Humidity

HEPA Filters

E

Gas Out

via RB Valve

Continuous Low Flow


Internal Pressure

Monitor

Gas In DualPurge

Gas Out

via RB Valve

NitroWatch

DualPurge

Continuous Low Flow


Internal Humidity

Monitor

Purge Control

Purge Control

DualPurge

Gas InDewWatch

Continuous Low Flow


Internal Humidity

Monitor

Continuous Low FlowIntermittent High Flow

Gas One DualPurge

Gas Mixer

NitroWatch

Gas Two

A

B

C

D

F

F

Gas Outvia RB Valve

Gas Out

via RB Valve



31/56

Controls

Process Gas & Humidity

. RH/Temperature

Data Logger

his USP device provides aonvenient record of humiditynd temperature conditions insidee process chamber. You set thegging interval (from 10 seconds to

2 hours), units (C or F) and hi/w alarms; the device stores up to6,382 temperature and RH readings.cluded software lets you download data via USP port and then display it as a strip

hart or export to an Excel spreadsheet. Only 4" long, the unit is powered by a single6V Li battery.

Cat. # $/Each

9500-10 195.00

. Programmable Logic Controllerserra congures and programs Allen-Bradley PLCs for a wide range of processpplications involving temperature, humidity, UV sterilization, and other control

ariables. Capabilities include touchscreen monitor/control of process recipes andmp cycles.

Call to discuss your process requirements!

Humex Humex 2

G. Humex Humidifierserras Humex Humidication Modules allow controlledoisture testing in a glovebox or other chamber. Theumex incorporates a water reservoir for high-volumepplications. The Humex 2 humidies the nitrogen

other process gas being fed into the chamber. Itplumbed to a standard water line and includes a

aporization chamber that provides 15 30 CFH ow rate.oth require a humidity sensor for automated humidityontrol with 3% accuracy. Visit TerraUniversal.com forll specications.

Cat. # $/Each

umex (110VAC, 50/60Hz) 9081-00 4,079.00umex 2 (110VAC, 50/60Hz) 9081-02 2,360.00umidity Sensor (installed) 9500-02A 515.00

H. Trace Oxygen Generatorhis Trace Oxygen Analyzer utilizes precise Zirconia Oxideffusion sensors to accurately detect oxygen concentrations,aking it ideal for applications in which even minute

oncentrations of oxygen can degrade parts. With a user-friendly,enu-driven microprocessor and a quick response time, thisxygen Analyzer is capable of measuring from 0.01ppm to00% oxygen with a high degree of accuracy. An RS232 interfaceincluded.

he control housing contains: the electronics module,e sensor, the sample cell, and a high-purity pump thataws gas from the glovebox for analysis. It includes agh-visibility LED digital display that indicates oxygen

oncentration.ensor: Quick response zirconia oxide diffusion

sensorMeasurement Range: Autoranging from 0.01 ppm to 100%

ccuracy: 1% or better of measured value in ppm

epeatability: 0.2% of measured valueesponse Time: 90% of step change within 5 secondsower: User selectable 110/220VAC, 50/60Hzcludes connection to specified glovebox.

Typical application with NitroWatch/DualPurge humidity controllers (not included)

Cat. # $/EachTrace Oxygen Analyzer 2005-97 6,917.00

OxygenAnalyzer

Continuous Low Flow


O2 Monitor

Sample for SensorCalibration

DualPurge

NitroWatch

G

H

I

J

Gas out viaRB valve

CO2Analyzeralso available



32/56

Process Gas

Generators& Dryers

Terras gas generators and gas dryers provideseveral ways to produce a dry, particle-freeenvironment inside glove boxes, desiccators, andother enclosures.

Membrane separation systems operate with nomoving parts and require almost no maintenance.The Nitrogen Generator uses this technology toprovide a reliable source of clean, dry nitrogen.

nd Plate

Epoxy Tube Sheet

O-RingsFeed Air

Support Core

Hollow Fibers

Enriched NitrogenProduct Gas

Outer Case

Oxygen-Enriched Air

Nitrogen GeneratorSeparation Membrane Reliable, Hassle-FreeNitrogen Source!

Dryex 80

Nitrogen Generators

Purity vs. Flow Rates (@100 PSI inlet feed, 72F*)

Model Purity99% 98% 97%

No. 2700-12A 7.4 CFH 10.2 CFH 12.5 CFHNo. 2700-11A 49.0 CFH 65.0 CFH 75.0 CFHNo. 2700-09A 126.0 CFH 180.0 CFH 223.0 CFH

* Higher ow rates can be achieved with higher feedtemperatur

Inert systems

Documents

Transcript of Inert systems