Industries & Applications

• Food & Beverage

• Health & Beauty

• OEM

• Dairy

• Beer & Wine

• Pet food

• Agriculture

• Distilleries

• CIP

• SIP

• Batch Processing

• Tank Blanketing

• Pasteurization

• Homogenizer

Certifications

• 3A Approved• Use of the 3A symbol ensures users that

the product meets sanitary standards for dairy and food & beverage and provides accepted criteria of sanitary design

• FDA Approval• All soft parts• O-rings• Seats• Diaphragms

PresenterPresentation NotesThe 3A symbol conveys that our equipment meets sanitary standards and meets a certain sanitary design criteria. In order to obtain the 3A symbol, the product is subject to a third party verification inspection.

Steriflow FB6C Series Sanitary Pressure Regulator

The FB6C sanitary pressure regulator is designed to regulate pressure in systems requiring the maintenance of sanitary conditions. Suitable for a range of applications including CIP, SIP, centrifuges, autoclaves, culinary equipment, sterilizers, process tanks.• No stem guiding in flow path

• Guiding above diaphragm eliminates metal-to-metal particulate generation

• Low Droop (set pt. offset)• Minimal stroke• Optimized springs

• 32 Ra on all wetted parts• Sanitary-Clamp body• Available in 3/4”, 1”, 1.5”, 2”, 3”

PresenterPresentation NotesWhy cast? Cost reduction, more economicalNot bar stock so it can fit larger sizes

Steriflow FB6C Series Sanitary Pressure Regulator

316 T-Handle for easy setpoint adjustment

Thumb lock for securing and retaining setpoint

316SST Adjusting Screw

Sanitary-Clamp for easy disassembly

316 Stainless Steel Spring Housing

CF3M Cast Body

Guiding above diaphragm eliminates metal-to-metal particulate generation

INLET

OUTLETSelf-draining design with 32 Ra finish on all wetted parts

* *

EPDM/Nylon Diaphragm

CIP/SIP dome lock

PresenterPresentation NotesStem guiding above flow path prevents any metal particulate generation which could sicken Media travels around plug, pressure exceeds set point and diaphragm pushes spring and stem/plug up to close the valve in order to keep consistent pressureIn open position. Media comes in through inlet

Steriflow FB6C Series Stem Guiding Comparison

Steriflow FB5C Series Sanitary Back Pressure Regulator

The FB5C sanitary back pressure regulator is designed to regulate pressure in systems requiring the maintenance of sanitary conditions. Suitable for a range of applications including CIP, SIP, centrifuges, autoclaves, culinary equipment, sterilizers, process tanks.• No stem guiding in flow path

• Guiding above diaphragm eliminates metal-to-metal particulate generation

• Low Creep (set pt. offset)

• Minimal stroke

• Optimized springs

• 32 Ra on all wetted parts

• Sanitary-Clamp body

• Available in 3/4”, 1”, 1.5”, 2”, 3”

Steriflow FB6C Series Sanitary Pressure Regulator

316 T-Handle for easy setpoint adjustment

Thumb lock for securing and retaining setpoint

316SST Adjusting Screw

Sanitary-Clamp for easy disassembly

316 Stainless Steel Spring Housing

CF3M Cast Body

Guiding above diaphragm eliminates metal-to-metal particulate generation

INLET

OUTLET

Self-draining design with 32 Ra finish on all wetted parts

* *

EPDM/Nylon Diaphragm

PresenterPresentation NotesStem guiding******Media travels around plug, pressure exceeds set point and diaphragm pushes spring and stem/plug up to close the valve in order to keep consistent pressureNo CIP Dome lock because if the media is flowing in, the valve will always be open

Steriflow FB8905 SeriesSanitary Ball Valve

The Marwin FB8905 is a three-piece 3A approved sanitary ball valve with 316L construction. Ideal for clean utility applications in the Food & Beverage and Consumer Health & Beauty industries. This valve is cavity filled to minimize media collection. Sanitary clamp ends are standard. The inner diameter of the end connections is the same as the ID of the ball, ensuring no obstruction of flow from inlet to outlet.• 3A Approved• Lockable handle prevents accidental valve operation• Designed for simple maintenance with in-line repairable feature• Cavity filled• ISO 5211 Actuator mounting flange• 316L Construction• 32 Ra or better internal finish• Sizes: ½”- 4”

PresenterPresentation Notes- ISO – Specific standard for the measurements of the mounting pad for the actuatorInline repairable – Can be unbolted in line to repair internals due to the 3 piece bodyFull port ball valve which means there is no restriction to flow from original pipe diameter

Steriflow FB8905 SeriesSanitary Ball Valve

Steriflow FB7904 SeriesSanitary Butterfly Valve

Steriflow FB7904 manual sanitary clamp-end stainless steel butterfly valve with EPDM seat, seals, and 12 position stainless steel handle for use in the Food & Beverage and Consumer Health & Beauty industries.• Sizes: ½”- 4”• 32 Ra wetted surface finish• Clamp end connection w/ butt-weld option• 12 position 316SS locking handle• Available with EPDM or Viton seats• Automated packages available

PresenterPresentation Notes12 position to fit specific flowMore economical to ball valvesNot meant for isolationNot 3A because they do not have a standard for these types of products

• Sizes: ½”- 4”• 32 Ra wetted surface finish• Clamp end connection w/ butt-weld

option• Available with EPDM or Viton seats• Positioner optional

Steriflow FB7904 SeriesAutomated Butterfly Valve

PresenterPresentation NotesPositioner can be ordered separatelyPneumaticNo electric option

Steriflow FB6903 SeriesSanitary Check Valve

The FB6903 is needed when it is necessary to prevent the product from flowing in the wrong direction. The valve is kept open by the liquid flow in the correct direction. If the flow stops, the plug is forced against its seat by the spring and closes against reversal of the flow. • 3A Approved - Standard 58-01• High flow rates with minimal pressure loss• 32Ra or better finish on all wetted parts• Self draining in vertical position• Sizes: ½” – 4”• Available with either EPDM or Viton seats• Easy disassembly for cleaning or repairs

PresenterPresentation NotesNot drainable with horizontal Works in horizontal or vertical but only self draining in verticalVertical upflow or downflow?

Steriflow FB6903 SeriesSanitary Check Valve

Stainless Steel Cap

Flow

Sanitary Clamp

Outlet

Inlet

Stainless Steel Spring

Stainless Steel Body

Disc

EPDM/Viton O-Rings

EPDM/Viton Gasket

Plate

Steriflow FB6903 SeriesSanitary Check Valve

Bestobell DTCS SeriesSanitary Disc Traps

Low to high flow thermodynamic sanitary steam trap for horizontal or vertical installation in plant steam or non-validated clean steam applications in the food & beverage and consumer health and beauty industries.• For use in steam distribution drainage where

there is no chance that condensate will contact process piping• Vessel Jacket condensate drainage• Plant steam in sanitary environment

• 316L body construction• Operates in any position• Sizes: ½” - ¾”

PresenterPresentation NotesIt is not 3A and nobody makes a 3A because they do not approve itThermodynamic – relies on pressures to operate

Bestobell BTCS SeriesSanitary Steam Traps

Two-piece sanitary clamp body, balanced port, high flow sanitary steam trap with horizontal inlet and/or outlet connections for pure steam SIP and loop drainage applications in the food & beverage and consumer health and beauty industry applications• Designed to provide higher flow rates and low

pressures and low subcooling levels• Standard sanitary clamp ends• Max Operating psi: 90• Max Allowable Temp: 350°F• Configured with bellows assembly• 316L body construction• Sizes: ½” – 1”

PresenterPresentation NotesNEED PIC SHOWING ARROW-thermostatic – Heat of steam expands element to close valve, condensate accumulates in body, element cools causing the bellows to condense, opening the valve and allowing condensate to drainIdeal for higher capacity SIP applications such as medium to large vessel applications. Allows High condensate flow rates during SIP heat up

Jordan MK60 SeriesPressure Regulator

Using the Jordan Valve sliding gate seat technology, the Mark 60 pressure regulators have the signature straight-through flow, short-stroke that is 1/3 of a globe-style valve, quiet operation and tight shutoff. The Mark 60 has high rangeability and extremely accurate regulation. • Body Materials: Ductile Iron, Bronze, Carbon Steel, Stainless

Steel, Cast Iron• End Connections: Threaded, Flanged, Socket Weld, Butt-

Weld• Self-operating Sliding Gate featuring Jorcote seats

• Ability to handle more flow in smaller line sizes• Reduction in size/cost of valve because of this characteristic

• Standard Cv’s 0.84-200• Setpoints from 0.5psi – 450psi• Diaphragm: Jorlon, Stainless Steel, Viton, Buna-N• Sizes: ¼” - 4”

PresenterPresentation NotesUnique regulator because of the sliding gate design which is where we see the most modified/engineered special products created

Jordan MK608IS SeriesGas Pressure Regulator

The Mark 608IS gas pressure regulator is ideal for low-pressure gas regulation. The self-contained, low-pressure gas regulator is for use on tank blanketing, gas meter inlet pressure regulating, gas burners, and other low-pressure air and gas applications.• Sizes: 3/4” - 1.25”• Body Materials: Ductile Iron, Carbon Steel,

Stainless Steel• End Connections: Threaded, Flanged• Setpoints 1” w.c. to 3.5 psi• Max Inlet Pressure: 150psi (10,3 bar)

PresenterPresentation NotesUsed for tank blanketingUses internal aspirator to sense when to close off supply of gas based on downstream pressure

Jordan MK608 SeriesGas Pressure Regulator

In tank blanketing applications, the Mark 608 is used to control the flow of the blanketing gas into the tank to maintain the proper positive pressure. Once the blanket has been established, a small flow of nitrogen is continually admitted to the tank to keep the blanket fresh.• Sizes: 1.5”-2”• Body Materials: Bronze, Carbon Steel, Stainless

Steel• End Connections: Threaded, Flanged• Setpoints 2” w.c. to 5 psi• Max Downstream Pressure: 25psi (1,7bar)

PresenterPresentation Notes- Has external sensing line connecting tank pressure to lower diaphragm plate to control downstream pressure

Jordan MK75 SeriesWafer Style Sliding Gate Control Valve

The Mark 75 wafer style control valve features all the benefits of the time-tested Sliding Gate design, in a lightweight, compact wafer-style body. The Mark 75 dramatically reduces the size and weight of conventional control valves. It can be installed in the widest range of gas, steam and chemical applications.• Sizes: 1”-8”• Body Materials: Stainless Steel, Carbon Steel• Jorcote Seat• Cv: Up to 600• Action: Direct (ATC) or Reverse (ATO)

PresenterPresentation Notes-Ideal for applications with limited space for larger valves and reduces weightKeeps the flow more consistent since it is just passing through sliding gatesHandwheel, motor, Positioner optional

Jordan MK78 SeriesGlobe Style Control Valve

The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. It can be used on a variety of applications including viscous/corrosive liquids, process gases, or utility steam in process or utility service.

• Ideal for steam in process or utility service

• Sizes: 1/2” - 2”

• Body Materials: Bronze, Carbon Steel, Stainless Steel

• Cv: Up to 50

• Shutoff Classes: IV & VI

• Control Ranges• 3–15 psi, 6–30 psi or split ranges

PresenterPresentation NotesLower risk of cavitationShutoff classesSoft seat allows for class VI shutoff

LowFlow MK708 SeriesFractional Flow Control Valve

The Mark 708 was developed to provide the most accurate control available for fractional flow services: whether for pilot plant installations, test stands, R&D facilities or for specialized processes such as dosing, injection and venting applications. • Body Type: globe style• Line Sizes: 1/4”, 1/2”, 3/4” (DN6 – 20)• Body Materials: CF8M, WCB, or ANY Alloy • Positioner optional• Pressure/Temperature:

• 5000 psi @ 100°F (344.73 bar @ 38°C)• 2529 psi @ 1000°F (174.36 bar @ 538°C)• HPA version up to 12,000 psi (828 bar)

PresenterPresentation NotesCv the volume of water in gallons per minute that will flow through at 1psi .5” strokeMeant for lower flow rates with higher pressuresWhat you use if you need very fine control From the 708 to the J series is even higher pressures and smaller

LowFlow J SeriesPressure Regulators

The LowFlow J Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves are typically used in research and sampling systems for corrosive and specialty gases. • Ability to handle high pressure and low flows• Line Sizes: Varies per valve• End Connections: Threaded, Socket Weld,

Flanged, others• Typical Body Materials: 316L, Hastelloy C,

Monel, Alloy 20, others• Cv (Kv): Dependent on model• Inlet Pressures: Varies per valve• PTFE or PEEK soft seats

JRPH SeriesJR Series JRHL Series

… and many more!

PresenterPresentation Notes- These regulate pressure of gasses rather than flowUtilizes manual knob to set pressureVery quick assembly turnaround timeVery easy to install

Bestobell TrapsUniversal Steam Trap

Bestobell Steam offers a universal mount, bimetallic steam trap for plant applications requiring standardized connections. Body, cover and connector are all stainless steel construction.

• Universal Mount

o Allows for use on any universal mount

• Single blade element offers long term service

• Built-in check valve prevents back flow

• Automatically adjust to operating pressure and load changes

• Stainless steel internals to prevent corrosion

• Fast start up capabilities

PresenterPresentation NotesUniversal mount allows trap use on any manufacturers univ mountTwo bolt replacement moduleBuilt in check valve to prevent backflowStainless steel internals

Marwin 2000F SeriesManual Flanged Ball Valve

The Marwin 2000 Series flanged ball valve is designed to handle process applications. Low torque, combined with a large mounting pad, makes this valve ideal for automation. Marwin offers a wide range of automated accessories including actuators (electric and pneumatic), limit switches, solenoids and gear operators.• 1/2”-6” Full Port• Carbon Steel or Stainless Steel• ISO 5211 Actuator mounting pad• Anti-Blowout Stem• Locking lever operator• Adjustable, live loaded PTFE packing with O-

ring secondary seal

Marwin 2000F SeriesActuated Flanged Ball Valve

The Marwin 2000 Series flanged ball valve is designed to handle process applications. Low torque, combined with a large mounting pad, makes this valve ideal for automation. Marwin offers a wide range of automated accessories including actuators (electric and pneumatic), limit switches, solenoids and gear operators.• 1/2”-6” Full Port• Carbon Steel or Stainless Steel• ISO 5211 Actuator mounting pad• Anti-Blowout Stem• Locking lever operator• Adjustable, live loaded PTFE packing with O-

ring secondary seal

Marwin 4700F SeriesFiresafe Ball Valves

The 4700 Series represents the leading technology in three piece ball valves. This versatile 2000 WOG rated valve is standard with API 607 5th Edition fire test qualification.• Sizes: 1/2”-4” Full Port• Available is carbon steel & stainless steel• ISO 5211 Actuator mounting pad• Anti-Blowout Stem• Locking handle• Adjustable, live loaded PTFE packing with O-

ring secondary seal

Slide Number 1Industries & ApplicationsCertificationsSteriflow FB6C Series �Sanitary Pressure RegulatorSteriflow FB6C Series �Sanitary Pressure RegulatorSteriflow FB6C Series �Stem Guiding ComparisonSteriflow FB5C Series �Sanitary Back Pressure RegulatorSteriflow FB6C Series �Sanitary Pressure RegulatorSteriflow FB8905 Series�Sanitary Ball ValveSteriflow FB8905 Series�Sanitary Ball ValveSteriflow FB7904 Series�Sanitary Butterfly ValveSteriflow FB7904 Series�Automated Butterfly ValveSteriflow FB6903 Series�Sanitary Check ValveSlide Number 17Slide Number 18Bestobell DTCS Series�Sanitary Disc TrapsBestobell BTCS Series�Sanitary Steam TrapsSlide Number 21Jordan MK60 Series�Pressure RegulatorJordan MK608IS Series�Gas Pressure RegulatorJordan MK608 Series�Gas Pressure RegulatorJordan MK75 Series�Wafer Style Sliding Gate Control ValveJordan MK78 Series�Globe Style Control ValveLowFlow MK708 Series�Fractional Flow Control ValveLowFlow J Series�Pressure RegulatorsSlide Number 29Marwin 2000F Series�Manual Flanged Ball ValveMarwin 2000F Series�Actuated Flanged Ball ValveMarwin 4700F Series�Firesafe Ball Valves