Industrial ToolingWe accept 60 Stoddard Rd, Mt Roskill, Auckland 1041,

Telephone +64 9 620 4169, Facsimile +64 9 620 8253Email: itl@indtool.co.nz, Website: www.industrialtooling.co.nz

60 Stoddard Road, Mt Roskill, Auckland 1041, P O Box 57 051, Owairaka, Auckland 1340Phone: (09) 620 4169, Fax: (09) 620 8253Email: itl@indtool.co.nz, Website: www.industrialtooling.co.nz AUGUST - SEPTEMBER 2014

CODE BOW1090SXTA3MRANGE- 6-10mm

CODE BOW1091SXTA4MRANGE- 10-20mm

CODE BOW1092SXTA5MRANGE- 20-50mm

Made in England

BOWERS SXTH ANALOGUE POINT BORE MICROMETERS

FEATuRES:

� 2-6mm 2 point, 6-300mm 3 point measurement. � Mechanical and Digital are available individually or in boxed sets. � UKAS certificates supplied as standard with all setting rings &

micrometers. � Blind bore measurement from 2mm - 6mm and above 12.50mm. � Tungsten carbide measuring faces on all 3 point heads from 12.50mm. � Extensions available for deep hole measurement. � Ratchet stop to ensure consistent measurement. � Setting rings included with individual instruments and sets.

PR

OM

OT

ION

S A

UG

-SE

PT

20

14

Standard Delivery � Main unit IPX-103 � Protection cover � Roughness test plate Ra � Battery 9V standard � Carrying case � Manual � RS-232 (only IPX-104) version � CV Instruments certificate

BOWERS IPX-103 SURFACE ROUGHNESS TESTER

� External & internal finish testing with swivable tracer. � Ra & Rz parameters in one instrument & all available

after each individual test. � Standard cut-off 0.8mm, adjustable to 1-3-5 times.

The IPX-103 is a portable,battery powered instrumentfor checking surface roughness.

CODE BOW6000$1666

.00+GST

The instrument can be used in laboratory, inspection area, workshop or wherever on-site surface roughness testing is required.

LIFTING CAPACITY(KG)

CODE FLAT ROUND WEIGHT (KG)

PRICE

XQF0100 100 45 5.5 $270.00+ GST

XQF0300 300 135 8.6 $450.00+ GST

XQF0600 600 270 21 $600.00+ GST

XQF1000 1000 450 46 $1,000.00+ GST

XQF2000 2000 900 118 $2,340.00+ GST

LIFTING MAGNETS � High quality, reasonably priced, “rare earth” magnets suitable for flat and round material and renowned for their safety (CE Certified).

� Safety factor is 3.5 times.

1

$1117 .50+GST $1745

.00+GST$822

.00+GST

INDUSTRIAL TOOLING

CLICK HERE FOR MOREDETAILED INFORMATION ORALTERNATIVELY CONTACT

INDUSTRIAL TOOLING

Industrial Tooling We accept60 Stoddard Rd, Mt Roskill, Auckland 1041,Telephone +64 9 620 4169, Facsimile +64 9 620 8253Email: itl@indtool.co.nz, Website: www.industrialtooling.co.nz

2

CODE DESCRIPTION LENGTH PRICE

TOP3530 BT50 x ER32 100mm $149.25+GST

TOP3531 BT50 x ER32 150mm $161.25+GST

TOP3533 BT50 x ER40 100mm $161.50+GST

TOP3534 BT50 x ER40 150mm $207.00+GST

TOP3410 NT50 x ER32 65mm $189.00+GST

TOP3500 NT50 x ER40 65mm $157.00 + GST

COLLET CHUCKS BT50/NT50

DIN Standard ISO15488 G6.3 10,000rpm

BT50 NT50

Made in Taiwan ER COLLET SETSMADE IN TAIWAN

CODE VRT3416TYPE ER16RANGE 1-10mmPIECES 10

$140 .02+GST

CODE VRT3420TYPE ER20RANGE 2-13mmPIECES 12

CODE VRT3432TYPE ER32RANGE 3-20mmPIECES 18

CODE VRT3440TYPE ER40RANGE 4-26mmPIECES 23

$374 .20

+GST

$140 .02+GST

$178 .35+GST

$225 .97+GST

CODE VRT3425TYPE ER25RANGE 2-16mmPIECES 15

CODE ANN3505SHANK - R8COLLET SIZE - ER32DRAW BAR - 7/16 x 24

CODE TOP3506SHANK - R8COLLET SIZE - ER40DRAW BAR - 7/16 x 24

$89 .00

EACH

ER COLLET CHUCKSR8 SHANK

+GST

CODE JAWWIDTH

JAWOPENING

TOTALLENGTH

MAXIMUMCLAMPING

FORCEPRICE

TOP5399 125mm 203mm 557mm 5000kg/cm² $1125.00+GST

TOP5400 160mm 275mm 665mm 5500kg/cm² $1367.00+GST

TOP5405 160mm 320mm 670mm 5500kg/cm² $1599.00+GST

TOP5406 200mm 367mm 713mm 6500kg/cm² $1792.00+GST

� Lockwell anti-lift mechanism. � Adjustable clamping pressure. � Mechanical booster provides steady clamping force against shocks

& vibrations with the aid of a disc spring mechanism inside.

AUTOWELL MECHANICAL POWER VISES

BALANCED ER COLLET CHUCKSMade in Taiwan

■ Balanced to G2.5, 22,000rpm. ■ Through coolant capability. ■ Comes with balancing certificate.

CODE DESCRIPTION LENGTH PRICEANN3539 BT30 x ER16 60mm $80.00+GST

ANN3540 BT30 x ER20 60mm $80.00+GST

ANN3541 BT30 x ER20 100mm $80.00+GST

ANN3542 BT30 x ER25 60mm $80.00+GST

ANN3543 BT30 x ER32 60mm $80.00+GST

ANN3401 BT40 x ER16 70mm $80.00+GST

ANN3401A BT40 x ER16 100mm $80.00+GST

ANN3402 BT40 x ER20 80mm $80.00+GST

ANN3402A BT40 x ER20 100mm $80.00+GST

ANN3403 BT40 x ER25 80mm $80.00+GST

ANN3403A BT40 x ER25 100mm $80.00+GST

ANN3404 BT40 x ER32 60mm $80.00+GST

ANN3405 BT40 x ER32 100mm $80.00+GST

ANN3406 BT40 x ER40 80mm $106.00+GST

ANN3406A BT40 x ER40 100mm $106.00+GST

■ MAS403, BT Shank. ■ DIN Standard 6499. � Suitable for CNC lathes

� High speed � Waterproof � High quality with quality ball bearings

HIGH SPEED LIVE CENTRESMADE IN TAIWAN

CODE TOP4332SHANK MT2MAX SPEED 5000rpm $150

.00+GST

CODE TOP4303SHANK MT3MAX SPEED 5000rpm $206

.25+GST

CODE TOP4304SHANK MT4MAX SPEED 4500rpm $211 .50

+GST

CODE TOP4305SHANK MT5MAX SPEED 3500rpm $337

.45+GST

3Industrial Tooling We accept60 Stoddard Rd, Mt Roskill, Auckland 1041,Telephone +64 9 620 4169, Facsimile +64 9 620 8253Email: itl@indtool.co.nz, Website: www.industrialtooling.co.nz

This low profile powerful side clamp is ideal for holdingthin parts and keeps the top surfaces clear for machining.

CODE LENGTH X WIDTH X OVERALL HEIGHT (mm) TOE HEIGHT STUD SIZE PRICE

TOP2250 105 x 35 x 22 10mm M12 $88.00+GST

TOP2251 138 x 40 x 30 14mm M16 $112.00+GST

ADJUSTABLE EDGE GRIP MACHINE CLAMPS

CODE TOP1150FEATuRES: � Digital. � Magnetic base for vertical and horizontal use. � Setting height 50mm. � Accuracy 0.005mm. � Has magnets in the base.

$206 .25+GST

CODE TOP1149FEATuRES: � Analogue. � Setting height 50mm. � Accuracy 0.01mm. � Has magnets in the base.

$232 .00+GST

MADEIN TAIWAN

MACHINE TOOLHEIGHT OFFSET GAUGES

� Extra long ball ended keys � Made in Germany

BALL ENDED HEX KEYS

CODE AMF2009-50RANGE 1.5-10mm9 Piece Metric Set

$26 .50+GST

CODE AMF2013-25

$38 .32+GST

RANGE .050-3/8”13 Piece Imperial Set CODE DESCRIPTION PRICE

SOL1001 2-6mm Tap Capacity $17.60+GST

SOL1002 4-10mm Tap Capacity $20.80+GST

SOL1003 5-16mm Tap Capacity $24.80+GST

SOL1004 6-20mm Tap Capacity $32.00+GST

SOL1005 8-25mm Tap Capacity $45.00+GST

BAR TYPETAP WRENCHES

MAGNETIC VEE BLOCKS

Made in Taiwan

CODE VRT8009LENGTH 101mmWIDTH 70mmHEIGHT 95mmMAGNETIC POWER 70kg

LARGE VEE IS 46mm WIDE.SMALL VEE IS 20mm WIDE.

$120 .00

+GST

COMBINATIONLETTER & NUMBER SETS

MADE IN uK

CODE IMP60303mm Letters & Numbers

$63 .75+GST

CODE IMP60606mm Letters & Numbers

$78 .75+GST

� Each set contains 27 letters A-Z & 10 numbers 0-9.

� Pryor punches are manufactured from quality chromium tool steel, allied to precise heat treatment.

� Forged steel body. � Fully hardened steel jaws.

4Industrial Tooling We accept60 Stoddard Rd, Mt Roskill, Auckland 1041,Telephone +64 9 620 4169, Facsimile +64 9 620 8253Email: itl@indtool.co.nz, Website: www.industrialtooling.co.nz

OUTSIDE MICROMETERS

Boxed micrometer sets 0-150mm and 150-300mm

also available atcompetitive rates.

CODE MIT0144RANGE 175-200mm

CODE MIT0143RANGE 150-175mm

CODE MIT0142RANGE 125-150mm

CODE MIT0141RANGE 100-125mm

CODE MIT0140RANGE 75-100mm

CODE MIT0139RANGE 50-75mm

CODE MIT0138RANGE 25-50mm

CODE MIT0137RANGE 0-25mm

$184 .10

+GST

$172 .90

+GST

$165 .00

+GST

$153 .75

+GST

$111 .00+GST

$99 .40

+GST

$82 .60

+GST

$65 .10

+GST

CODE SIL5207MAGNIFICATION - 7X

$99..90

CODE SIL5210MAGNIFICATION - 10X

Supplied with 9 photo etched reticles, for checking thickness, threads, angles, diameters & measuring, etc.. Adjustable focus for clear sharp images.

$99..90

COMPARATOR SETS

+GST +GST

$279 .50+GST

CODE MIT2607180-907B

COMBINATION SETS � Latest model. � Stainless steel blade. � Forged & hardened steel square head,

centre head & protractor head.

$60 .76+GST

$67 .28+GST

PEC ADJUSTABLE SQUARES � Metric and Imperial graduated blade. � All blade fully hardened and tempered. � High contrast, micro-fine blade graduations. � Durable, easy-to-read satin chrome finished blades.

CODE PEC5000BLADE LENGTH 100mm/4”

CODE PEC5010BLADE LENGTH 150mm/6”

MADE IN uSA

TUBULAR INSIDE MICROMETERS

Covers a wide range of I.D.measurements by combining rodsand anvils with the micrometer head.

CODE MIT1862RANGE 50-1000mm

CODE MIT1861RANGE 50-500mm

CODE MIT1860RANGE 50-300mm

$273 .00

+GST

$331 .50

+GST

$463 .50

+GST

� A simplistic angle finder consisting of 2 x 200mm (English/metric) blades centrally hinged with a lock knob.

� Measures a full 360° (actually will measure to 999.9°) to resolution of 0.1° and accuracy to 0.3°.

� With on/off button, zero button and auto shut off after 6 minutes.

� Stainless steel blades.

CODE EVE3250

DIGITAL ANGLE FINDER

$44 .10

+GST

5Industrial Tooling We accept60 Stoddard Rd, Mt Roskill, Auckland 1041,Telephone +64 9 620 4169, Facsimile +64 9 620 8253Email: itl@indtool.co.nz, Website: www.industrialtooling.co.nz

� Accepts all indicators with a dovetail or 8mm stem.

� C/w fine adjustment. � Central knob locks all 3 joints solidly. � Extremely flexible multi-dimensional movement.

� Stable and accurate when locked.

CODE INS4176MAGNET STRENGTH - 80kgARM LENGTH - 355mm

$74 .25+GST

UNIVERSAL MAGNETIC BASE

� Face diameter 58mm. � Jewelled bearings. �Graduation 0.01mm. � Travel 10mm.

CODE INS3710$39..00

+GST

DIAL INDICATORS

DIGITAL MICROSCOPEDIGITAL HEIGHT GAUGE

�Can take pictures & video. � Supplied with measuring software. � 10x-200X magnification adjustable. � Built in LED illumination. �Compatible with Windows 7/XP/Vista/Word/Excel.

CODE INS9000$322..50

+GST

CODE INS4400SIZE - 300mm/12”

CODE INS4402SIZE - 600mm/24”

�Resolution: 0.01mm/0.0005” � Buttons: On/off, zero, mm/inch, ABS/INC, data hold, TOL, set. � ABS/INC is for absolute & incremental measurement. � TOL is for tolerance measurement. �Carbide tipped scriber. �Made of stanless steel (except the base). �Data output.

$336 .75

+GST

$514 .50+GST

DEPTH MICROMETER �Base length 100mm. �Graduation: 0.01mm. �Micrometer head accuracy: +/-3µm �Number of rods 6.

CODE INS2555$159..75

+GST

METRIC FEELER GAUGES

CODE NUMBER OF LEAVE LENGTH RANGE PRICE

INS4600 20 100mm 0.05 to 1.00mm x .05mm $10.50+GST

INS4603 13 100mm 0.05 to 0.30 x .05mm 0.40 to 1 x 0.10mm

$12.00+GST

INS4605 32 100mm 0.03 to 0.10 x 0.01mm +0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.70, 0.75, 0.80, 0.90, 1.00mm

$15.07+GST

INS4608 20 150mm 0.05-1.00mm x 0.05mm $21.24+GST

INS4609 20 200mm 0.05-1.00mm x 0.05mm $27.75+GST

INS4610 20 300mm 0.05-1.00mm x 0.05mm $34.50+GST

� Made of hardened alloy steel. � Meet DIN 2275 standard.

6Industrial Tooling We accept60 Stoddard Rd, Mt Roskill, Auckland 1041,Telephone +64 9 620 4169, Facsimile +64 9 620 8253Email: itl@indtool.co.nz, Website: www.industrialtooling.co.nz

PROMO SETSFree Deburring Handle

CODE SAV9040$24

.00+GST

CODE SAV9030$19

.20+GST

■ Each bonus pack includes 10 blades, FREE Mango II handle & telescopic extension holder.

Each bonus pack includes10 blades &

FREE Mango II handle.

Shaviv handles aresuitable for all Noga blades

� Slimline design. � High torque, heavy duty for chamfering,

deburring & finishing work. � Supplied with both 3mm & 6mm collets.

RPM - 35,000SIZE - 22ø- x 180mm

CODE BES0300

� High speed, quiet running & well balanced. � Ideal for precision grinding & finishing. � Supplied with 3mm collet.

BEST BRAND

$168 .00+GST $213

.00+GSTRPM - 80,000

SIZE - 20ø- x 143mm

DIE GRINDERS

CODE BES1380

MINIATURECARBIDE BURR SETS

$99 .00+GST

CODE ARG8670

■ 3mm shank. ■ 10 piece set ■ Double cut

$29 .97+GST

CODE ARG8660

DIAMOND BURR SETS

■ 3mm shank. ■ 30 piece set

Red & white aluminium oxide, new development especially for the mould & die industry, quite hard, good for profiling, resistant to high temperatures.

CODE LUK1000GRADE NDWSHANK DIA - 3mmSET CONFIGuRATION - 10 pcs

MADE IN GERMANY

$42..50

MOUNTED POINT SETS

+GST

� 28,000 SPM � 0.7mm Stroke

NOTE:An extensive range of competitively priced ceramic stones &diamond files are held in stock for use with the Turbolap asper the back page of this flyer.

AIR OPERATED LAPPING TOOLTURBOLAP TLL-07

CODE ARG6007

$489 .00+GST

7Industrial Tooling We accept60 Stoddard Rd, Mt Roskill, Auckland 1041,Telephone +64 9 620 4169, Facsimile +64 9 620 8253Email: itl@indtool.co.nz, Website: www.industrialtooling.co.nz

DEBURRING, CHAMFERING& COUNTERSINKING KIT

Contains:Mango II Handle, Holder E, Holder F, E100S, E111, E200, E300, E601, F20, F26X

E100S

E300

E111

E601

E200

F20 F26XHolder E

Holder F

StraightEdge

HoleEdge

OuterEdge

Cross-HoleBoth Edges

HoleBack Edge

$78 .85+GST

CODE SAV2080

Contains blades suitable for steel, aluminium,copper, stainless, brass, cast iron & plastic.

� 2 grits back to back on one stone. � Stocked in aluminium oxide and provides a smooth finish and is also suitable for stainless steel and materials below Rc 35.

� Closely resembles an "India Stone".

COMBINATION BENCH STONES

CODE BOR9590MATERIAL Auminium OxideSIZE (INCHES) 5/8” x 1-5/8” x 4½”GRIT 120/320

$17 .92+GST

CODE BOR9600MATERIAL Auminium OxideSIZE (INCHES) 1” x 2” x 8”GRIT 120/320

$32 .83

+GST

Made in the USA

FEATuRES � In 5gm syringes . � Oil-alcohol soluble. � High concentration of diamond as opposed to other brands. � unique dial controlled syringe for precise distribution.

DIAMOND PASTE

CODE MICRON APPROX MESH EQUIVALENT COLOUR PRICE

BOR2051 M1 15000 finest finishing, optical polishing

White $33.60+GST

BOR2053 M3 8000 finest finishing, optical polishing

Yellow $33.60+GST

BOR2056 M6 3000 final finishing moulds

Orange $40.80+GST

BOR2059 M9 2000 final finishing moulds

Green $40.80+GST

BOR2065 M15 1000 semi finishing Blue $40.80+GST

BOR2070 M25/30 750 semi finishing Red $40.80+GST

With ¼” bit shanks, three HSS countersinks,plus a hand deburring tool in each kit.

- OR - CODE SAV5032DESCRIPTION - Cross HoleRANGE - 8-20mm

CODE SAV5031DESCRIPTION - 3 FluteRANGE - 12-20mm

COUNTERSINK SETS

$90 .00+GST

� Suitable for use on grinding, EDM machines as well as milling operations.

� Thin profile only 50mm high. � Suitable for holding thin & thick work pieces.

VERTEX MAGNETIC CHUCKS

CODE VRT5018SIZE - 100 x 175mm $399

.75+GST

CODE VRT5025SIZE - 125 x 250mm $498

.75+GST

CODE VRT5030SIZE - 150 x 300mm $564

.00+GST

CODE VRT5045SIZE - 150 x 450mm $875

.00+GST

CODE VRT5050SIZE - 200 x 450mm $1134

.00+GST

Industrial Tooling We accept60 Stoddard Rd, Mt Roskill, Auckland 1041,Telephone +64 9 620 4169, Facsimile +64 9 620 8253Email: itl@indtool.co.nz, Website: www.industrialtooling.co.nz

ARGOFILE CERAMIC SUPER STONES AND S-D-S SUPER DIAMOND STONES

CODE PART NO. SIZE (mm) GRIT COLOUR PRICE

ARG8110 NSG054 0.5 x 4 x 100 180 Gold $17.00+GST

ARG8111A NSL054 0.5 x 4 x 100 300 Light Brown $17.00+GST

ARG8111B NSO054 0.5 x 4 x 100 400 Orange $17.00+GST

ARG8113 NSP054 0.5 x 4 x 100 600 Dark Brown $17.00+GST

ARG8114 NSL084 0.8 x 4 x 100 300 Light Brown $17.00+GST

ARG8115 NSP084 0.8 x 4 x 100 600 Dark Brown $17.00+GST

ARG8116 NSB084 0.8 x 4 x 100 800 Blue $16.00+GST

ARG8117 NSW084 0.8 x 4 x 100 1000 White $16.00+GST

ARG8118 NSL086 0.8 x 6x 100 300 Light Brown $25.00+GST

ARG8119 NSP086 0.8 x 6 x 100 600 Dark Brown $25.00+GST

ARG8120 NSB086 0.8 x 6 x 100 800 Blue $24.00+GST

ARG8121 NSW086 0.8 x 6 x 100 1000 White $24.00+GST

ARG8128 NSG102 1 x 2 x 100 180 Gold $9.00+GST

ARG8129 NSL102 1 x 2 x 100 300 Light Brown $9.00+GST

ARG8130 NSO102 1 x 2 x 100 400 Orange $9.00+GST

ARG8131 NSP102 1 x 2 x 100 600 Dark Brown $9.00+GST

ARG8132 NSB102 1 x 2 x 100 800 Blue $8.00+GST

ARG8132A NZW102 1 x 2 x 100 1000 White $8.00+GST

ARG8133 NSE104 1 x 4 x 100 120 Emerald $17.00+GST

ARG8134 NSG104 1 x 4 x 100 180 Gold $17.00+GST

ARG8135 NSL104 1 x 4 x 100 300 Light Brown $17.00+GST

ARG8136 NSO104 1 x 4 x 100 400 Orange $17.00+GST

ARG8140 NSP104 1 x 4 x 100 600 Dark Brown $17.00+GST

ARG8144 NSB104 1 x 4 x 100 800 Blue $16.00+GST

ARG8148 NSW104 1 x 4 x 100 1000 White $16.00+GST

ARG8153 NSE106 1 x 6 x 100 120 Emerald $25.00+GST

ARG8154 NSG106 1 x 6 x 100 180 Gold $25.00+GST

ARG8155 NSL106 1 x 6 x 100 300 Light Brown $25.00+GST

ARG8156 NSO106 1 x 6 x 100 400 Orange $25.00+GST

ARG8160 NSP106 1 x 6 x 100 600 Dark Brown $25.00+GST

ARG8164 NSB106 1 x 6 x 100 800 Blue $24.00+GST

ARG8168 NSW106 1 x 6 x 100 1000 White $24.00+GST

ARG8194 NSG110 1 x 10 x 100 180 Gold $32.00+GST

ARG8195 NSL110 1 x 10 x 100 300 Light Brown $32.00+GST

ARG8200 NSP110 1 x 10 x 100 600 Dark Brown $32.00+GST

ARG8204 NSB110 1 x 10 x 100 800 Blue $31.00+GST

ARG8208 NSW110 1 x 10 x 100 1000 White $31.00+GST

ARG8354 NSG206 2 x 6 x 100 180 Gold $49.00+GST

ARG8355 NSL206 2 x 6 x 100 300 Light Brown $49.00+GST

ARG8360 NSP206 2 x 6 x 100 600 Dark Brown $49.00+GST

ARG8364 NSB206 2 x 6 x 100 800 Blue $48.00+GST

ARG8368 NSW206 2 x 6 x 100 1000 White $48.00+GST

ARG8416 NSGD3B 3mm dia x 100 180 Gold $34.00+GST

ARG8418 NSOD3B 3mm dia x 100 400 Orange $34.00+GST

ARG8420 NSPD3B 3mm dia x 100 600 Dark Brown $34.00+GST

ARG8425 NSBD3B 3mm dia x 100 800 Blue $33.00+GST

ARG8430 NSWD3B 3mm dia x 100 1000 White $33.00+GST

ARG8470 SDS-142 1 x 4 x 100 200 Diamond $40.00+GST

ARG8472 SDS-144 1 x 4 x 100 400 Diamond $40.00+GST

ARG8474 SDS-146 1 x 4 x 100 200 Diamond $40.00+GST

ARG8476 SDS-162 1 x 6 x 100 200 Diamond $60.00+GST

ARG8478 SDS-164 1 x 6 x 100 400 Diamond $60.00+GST

ARG8480 SDS-166 1 x 6 x 100 600 Diamond $60.00+GST

ARG8482 SDS-112 1 x 10 x 100 200 Diamond $80.00+GST

Ceramic SUPER Stones Offer: � Fast stock removal, are non-clogging & almost

unbreakable. � Suitable for using with diamond paste for

polishing deep slots.

S-D-S SUPER Diamond Stones: � unlike ceramic stones, they will cut & polish in

all directions making them perfect for polishing ribs, hard-to-reach slots & sidewalls.

� Excellent for polishing carbide & hardened surfaces.

Both Ceramic & Diamond Super Stonesare suitable for polishing by hand,

ultrasonic or profiler machine.

For more informationon the Argofile range ofrotary, reciprocating or

ultrasonic polishing machines,contact Industrial Tooling.

Buy 5 or more and get a 10% discount!!

8