Industrial Piercing Infection

The most typical industrial piercing is performed in the ear cartilage, wherein two holes that aremade in the upper part of the ear are connected by a single jewelry. For everyone who haveundergone this painful procedure, it is imperative to follow aftercare tips directed by the piercingexpert. Failure to do so will increase the risk of infection and ultimately, a long healing process.

Signs of Infection

Whether you are referring to common ear-piercing or industrial piercing, they involve puncturing ofthe skin and causing injury to the cells. Thus, they are at a risk for bacterial and viral infection, ifproper aftercare is not followed. And identifying infection symptoms is important for addressing thepainful condition promptly. Some of the noticeable signs that indicate infection are prolongedredness, swelling, inflammation, burning sensation and pain, even after 3-4 days of piercing. In somecases, bleeding and unusual discharge are observed at the pierced sites.

What to Do in case of an Infection

You have been wanting to adorn industrial piercing jewelry since a long time and finally, you got thepiercings done. Imagine, you did your best to prevent infection after undergoing the procedure.Unfortunately, you experience symptoms that are indicative of infection. So, what will you do to fightinfection and promote quick healing? Discussed below are some guidelines, which can be followedfor effectual treatment of the infection.

Cleaning the Infection

As with any type of body piercing, proper industrial piercing cleaning is very important at the site isa common caring tip. A good alternative for cleaning is using salt water solution, prepared bydissolving ½ teaspoon sea salt in 1 cup lukewarm water. Dip a clean cotton ball in this solution anddab over the infection sites. Wet and remove the dried discharge accumulated around the jewelry.Repeat this 2-3 times daily for effective results. Saline solution is a natural disinfectant that helpskill the microbes by dehydrating them.

Avoid Touching the Piercing

Everyone of us tend to rotate or touch jewelry, especially when it is a new one. Except duringcleaning, do not touch the jewelry or pierced sites frequently for the first few days after piercing.This increases irritation to the sites and also infection, if you are touching with unwashed hands.While taking bath or shampooing, cover the piercing sites with a clean plastic warp to avoidcontamination.

Infection Care

Indeed, industrial piercing care and infection arevery difficult to deal with, considering the fact thatthere are two piercings and a single jewelry is usedto connect them. In short, there are high chances ofinfection in one piercing site, if it is the case,spreading very easily to the other. Do not considerchanging the jewelry before complete healing isachieved. Avoid using peroxide or disinfectant soaps, until and unless they are suggested by thepiercer.

Medication for the Infection

For unusual and smelly discharge from the pierced sites, get the problem checked by the piercer orfamily physician. Taking the doctor's help is also imperative in case of fever or other severe infectionsymptoms. Based on the condition, antibacterial ointments and antibiotics may be prescribed by thedoctor. Strictly follow the recommended dosage and ointment application tips for fast healingprocess.

The long healing period of industrial piercing, which takes more than 3 months, is a major concernfor people who want this funky body art. And the worst part is infection, which again slows downhealing process. Follow the aftercare instructions properly so as to prevent infection. That way, youcan flaunt your favorite jewelry within a short time, and without undergoing the pain of treatinginfection symptoms and the unease that is associated with it.