Industrial Internet of Things by 5ME (IIoT)

of 19 /19
Industrial Internet of Things Spring 2016 Keith Dailey Regional Sales Executive Software Field Engineer May 16, 2016

Embed Size (px)

Transcript of Industrial Internet of Things by 5ME (IIoT)

  • Industrial Internet of

    Things Spring 2016

    Keith Dailey

    Regional Sales Executive

    Software Field Engineer

    May 16, 2016

  • Keith Dailey Cincy IoT Meetup 2016

    Industrial Revolution!

    2

  • Keith Dailey Cincy IoT Meetup 2016 3

    Who is 5ME?

  • Keith Dailey Cincy IoT Meetup 2016

    What We Do

    4

    Manufacturing Solutions specialty cutting tools, fluids,

    application support services, and consulting

    Cryogenic Manufacturing Technology delivering liquid

    nitrogen thru a machine tool spindle to the cutting edge of a

    tool where it meets the workpiece to reduce temperature,

    reduce wear on the cutting tool, increase tool life up to 10x,

    increase cutting speeds up to 5x, eliminate coolants and

    lubricants, and reduce environmental and safety impact.

    Manufacturing Software Freedom eLOG product is a

    complete asset monitoring solution designed to collect and

    analyze important manufacturing data in real time, straight

    from the machine control.

  • Keith Dailey Cincy IoT Meetup 2016 55

    Manufacturing Software SolutionsFreedom eWARE Modular Software Applications at the

    Machine Control or Via a Network

    Different users Different reports

    One data source

    eCONNECT Control Resident

    Data Collector

    eNERGY Energy Monitoring

    eCELL Cell Controller

    eLOG Data Collection

    Productivity Analysis

    OEE

    eSCOPE Maintenance Data

    Diagnostics

    Stand Alone

    Networked

    eMONITOR Machine Health

    Process Health

  • Keith Dailey Cincy IoT Meetup 2016

    Integrating Top Floor to Shop Floor

    6

  • Keith Dailey Cincy IoT Meetup 2016 7

    Actual Customer

    Examples

    of

    Productivity Improvement

    with Freedom eLOG

  • Keith Dailey Cincy IoT Meetup 2016 8

    Pain Point

    > Difficulty in Ascertaining Equipment

    Utilization & Availability

    5ME Solution

    > Enterprise Wide Implementation of eLOG

    (436 Assets, 25 Plants, 12 Countries)

    Benefit

    > $3.0M Productivity / Throughput

    Improvement through Existing Assets

    (ROI < 12 Months)

    5ME Success Stories

    Cameron

  • Keith Dailey Cincy IoT Meetup 2016 9

    5ME Success Stories

    Caterpillar

    Pain Point

    > Difficulty in Ascertaining Equipment

    Utilization & Availability

    5ME Solution

    > Enterprise Wide Implementation of eLOG

    Benefit

    > Nearly 17% Improvement in OEE against

    burdened Factory Operating Cost of $35M

    Resulting in Productivity Gains worth $5.8M

  • Keith Dailey Cincy IoT Meetup 2016

    Industrial Revolution!

    10

  • Keith Dailey Cincy IoT Meetup 2016

    Industry 4.0 Powered by IIoT

    11

    The term was first used in 2011 at the Hannover Fair. In October 2012 the Working Group on Industry 4.0 chaired by

    Siegfried Dais (Robert Bosch GmbH) and Henning Kagermann (acatech) presented a set of Industry 4.0

    implementation recommendations to the German federal government. On 8 April 2013 at the Hannover Fair, the final

    report of the Working Group Industry 4.0 was presented.

    https://en.wikipedia.org/wiki/Hannover_Fairhttps://en.wikipedia.org/wiki/Robert_Bosch_GmbHhttps://en.wikipedia.org/wiki/Henning_Kagermannhttps://en.wikipedia.org/wiki/Acatech

  • Keith Dailey Cincy IoT Meetup 2016

    Where is Industry 4.0 today?

    12

  • Keith Dailey Cincy IoT Meetup 2016

    Very Early Definitions are still being developed

    AMT says that less than 10% of industrial assets in manufacturing today are

    being monitored. AMT is seeking to increase this number by standardizing the

    language that machines speak with MTConnect.

    13

    Established in 2008, MTConnect is an open-source, royalty-free data

    definition launched and supported by many major players in the industrial

    manufacturing world.

    5ME is an active member of the MTConnect Technical Advisory Group

    (TAG) and we certify all of our products to be MTConnect compliant.

  • Keith Dailey Cincy IoT Meetup 2016

    Data Platforms

    GE is spending a lot of money making us all recognize this guy his name is

    Owen.

    14

  • Keith Dailey Cincy IoT Meetup 2016

    GE Digital, GE Predix

    15

    GE is launching a new data platform, hoping to be the place that collects

    the data output and enables developers to showcase display, analytics,

    rule-engines, and more in an App Store like environment.

  • Keith Dailey Cincy IoT Meetup 2016

    Losant

    Losant is another platform service that is more focused on providing all the

    building blocks to allow custom solutions at the user level.

    16

  • Keith Dailey Cincy IoT Meetup 2016

    How To Get Involved?

    The barrier to entry in this field has never been lower!

    Free data streams available with MTConnect or create your own with their

    published tag specifications!

    Create an interface to a piece of equipment and use the MTConnect tag set

    to kickoff your communication protocol!

    Enter a project at AMT, MTConnect, or DMDII and get grant money!

    17

  • Keith Dailey Cincy IoT Meetup 2016

    Resources

    5ME 5me.com

    AMT amtonline.org

    DMDII - dmdii.uilabs.org

    Losant losant.com

    MTConnect Institute - mtconnect.org

    SME sme.org

    ITAMCO itamco.com (forward thinking manufacturer that is at the bleeding

    edge of applying todays technology to a 60 year old gear cutting business)

    Their twitter feed is worth a look https://twitter.com/ITAMCO_

    18

    https://twitter.com/ITAMCO_

  • Keith Dailey Cincy IoT Meetup 2016 19

    Thank You