Industrial Equipment Rental & Service...• Aluminum Hand Bender Head with Handle for 3/4" EMT, 1/2"...
Transcript of Industrial Equipment Rental & Service...• Aluminum Hand Bender Head with Handle for 3/4" EMT, 1/2"...
Industrial Equipment Rental & Service
MICHIGAN’SONLY AUTHORIZED
WARRANTY SERVICE CENTER
Bending
VERSATILE• 1 shoe bends 1/2" to 2" EMT, IMC and Rigid conduit• Simple switching between vertical and horizontal
bending configurations
ACCURATE• Absolute encoder stops bending at precise angles• Digital pendant sets angle and
monitors process
RELIABLE• Solid state electronics rated for 1,000,000+ bends• Solid state system eliminates arcing and prevents
damage from temporary power loss
EFFICIENT• Save one hour with every move• All components pin to the table, reducing component
loss allowing convenient transport from site to site
MOBILE• Minimize material handling and repetitive
lifting with on-board storage• Fits through standard height doors 36" wide
ERGONOMIC• Waist-height bending for operator comfort
VERSATILE• Bend 1/2" to 2" RIGID/IMC/EMT
on 2 shoes
MOBILE• Lightweight, compact design for
easy jobsite portability
RELIABLE• Greenlee’s classic “triple-nickel”
electric bender, features simple relay controls for easy field repairs
Electric Bender
Classic Electric Bender for Conduit & Pipe
Mobile Bending Table
555C Series Electric Bender Shoe Guides
• No loose pieces• One time setup• Bend 1/2" to 2" on one shoe• Works with 555C electric conduit benders• Less lifting reduces operator fatigue
Rigid/IMC Shoe Group, 1/2" to 2"
EMT Shoe Group, 1/2" to 2"
Item #28008
Item #555C
Item #854DX
Item #881-MBT
Item #23803
SPEED• 8,000 lbs. pulling force to handle most
pulling jobs.
VERSATILE• Available with Mobile VersiBoom for
less than 2 minute, one person set-up, & 20' tall
• Available with floormount & chain mount for tighter spaces
Ultra Tugger® 8(UT8) Cable Puller: 8000 lb.
Crimper Compact Ratchet Cable Cutter
• 1000 kcmil (MCM) Maximum Use, 750 kcmil (MCM) Frequent Use
• Simple, one-hand operation• Compact – convenient for working in
tight places and stores easly in tool pouches
• Blade release allows blades to be opened in mid-cut
• Crimping Capacity: 8 AWG - 4/0 AWG Copper
• Color-coded, hexagonal rotating dies• Full cycle mechanism releases only
after full crimp cycle is completed
Ultra Tugger® 10 (UT10) Cable Puller: 10,000 lb.
SPEED• 2-Speed gear-motor enable 20% faster
pulling time• Shift from high-speed/low-load pulling to
low-speed/high-load pulling with a simple double-tap motion on the foot-pedal
VERSATILE• Available with Mobile VersiBoom for less
than 2 minute, one person set-up, & 20' tall• Available with floor mount
& chain mount for tighter spaces
HEAVY DUTY• Customized gear motor
specifically for heavy-duty cable pulling applicationand meet UL & cULsafety requirements
G3 Tugger® Cable Puller
Item #6806
Item #841AH
Item #6906
Item #G3
Cable Stripping Tool
• Aluminum Hand Bender Head with Handle for 3/4" EMT, 1/2" Rigid/IMC
• Superior, patented Site-Rite sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light
• Strong, stable square hook design
Hand Bender
• Single button operation• CAT IV 1000 V rated for maximum safety• Automatically shuts off after 5 minutes of
inactivity to extend battery life
Cable Pulling
Available with pulling rope when requested
• 3X faster set-up than competition - no loose pieces
• 20% faster than competition• 25% stronger than competition• Clamp easily adjusts for different sizes of
conduit• Right angle sheave safely keeps operators
out of direct line of pulls• Portable handle and wheels for increased
mobility around jobsites• Change tail length, pull direction, and angle
of pull with ease• Can hook on the back of a truck hitch• Customized motor with
circuit breaker specifically designed for cable pulling
Hand Tools
Capacity:• 8 AWG to 750 kciml• Intuitive Blade Design allowing for user to
maintain contact with the cable at all times• Cable jacket lifting edge• Blade lacerations comprise approximately 40% of all
recordable injuries on the jobsite.
Non-Contact Voltage Detector
FASTER. SAFER. EASIER®.
Item #G2090
Item #K09-2GL
Item #GT-12A
Item #760
Pulling Rope 1/2" x 600 ft pulling rope Item #4567/8" x 1200 ft pulling rope Item #34138
Hand Tools
1/2" x 2" Hydraulic Driver Punch Set
Quick Change Carbide Cutter Kit, 8PC
• Fast, easy and simple to operate• Compact design for field use on
construction sites and maintenance jobs• Punches 10 times faster than wrench method• Will also drive 751 Cable Cutter head• Can be used with most standard
round Slug-Buster® and Slug-Splitter SC® punches (not 1/2", 9/16", 5/8")
• Quick Change Arbor – change cutter heads with a simple push and turn
Specifications: • Application: Cut fast, accurate holes in stainless
steel, mild steel, iron, copper, brass, aluminum, fiberglass and plastic sheet up to 3/16" thick
• Cutting Edge: Tungsten Carbide Teeth• Hole Size: 6 sizes: 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2"
Item #648 Item #CMI-600
Item #7306SB
INTELLI-PUNCH™ 11-Ton Tool
Dieless Crimping Tool Gorilla Press
6 Ton Dieless Crimping Tool
Clamp Meter
• Amperage Measurement: 60, 600 Amps AC+DC
• Measurement Category: CAT III 600V, CAT IV 300V
• Measures AC+DC current and DC microamps
• Tests continuity and diodes• Phase Sequence & Motor
Rotation tests• Peak-RMS measures motor in
rush current• Data hold• Two voltage detection modes -
non-contact or using a single test lead
Application:• Punch conduit size holes in mild steel, aluminum,
fiberglass and plastic• Capacity: 11-Ton• Capacity Mild Steel:
• 4" Conduit up to 10 gauge• 6" Conduit up to 14 gauge
• Capacity Stainless Steel: • 4" conduit up to 10 guage
• Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications
• Tools automatically retract when the crimping cycle is complete
• Crimping Capacity: 4 AWG -1000 kcmil copper color coded lugs and splices, 6 AWG -1000 kcmil aluminum color coded lugs and splices 1000 kcmil
• Crimping Force 12.000 ton
• Safely install fittings without soldering or welding
• Saves time when performing multiple presses
• Secure grip for easy one-handed operation
• Enables quick exchange of pressing jaws
Capacity:• Copper #8 -500 kcmil (MCM)• Aluminum 1/0 - 350 kcmil (MCM)• Crimp Cycle Time: Max. 7 seconds• Crimping Force:
Variable 3-6 Ton (30-60Kn)• Estimated Cycles per Charge:
100-300 based on cable size
Item #LS100X11A
Item #EK12IDL11 Item #PSTLP-KIT001
Item #EK6IDL11
Item #540-12Fish Stix Kit 1/4" x 12'
• Highly visible green color rods can be easily threaded together
• 1/4" diameter fiberglass adds rigidity when connecting multiple sections
• 200 LBS maximum pulling strength• Two different threaded tips accommodate
various bundles of wire or cable
Our sales, repair, and customer service teams receivedextensive training from Greenlee for the fullline of products we offer.
MICHIGAN’SONLY AUTHORIZED
WARRANTY SERVICE CENTER
Industrial Equipment Rental & Service
MidlandTool.com • 877-44MIDLAND • SuperiorToolRental.com