INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS · SNK series, terminal block accessories Common...
Transcript of INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS · SNK series, terminal block accessories Common...
Sum
mar
y_5
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
5
Sum
mar
y_5
SNK series, terminal block accessories
Common terminal block accessories
Mounting rail PR 196-198
Screw end stops BAM4, BAZH1 199
Screwless end stops BAZ1 200
Label holders LH, LH-R1 201
LH-J 202
Screwless jumper bars JB5 203
JB6 204
JB8 205
JB10 206
JB12 207
Cross spacing jumpers JB85-3 208
Test adapters TP2, TP4 209
Test connectors TC5 210
Component plugs PG5-R2 211
PG5, PG5-R1 212
Screwdrivers TO 213
Crimping tools PS 213
PI-Spring terminal block accessories
End sections EK 214-216
Circuit separators CS-R2, CS-R3 217-218
Shield connectors SHBP, SHB 219
Screw clamp terminal block accessories
End sections ES 220-221
Screw jumper bars JB8 222
JB16, JB22 223
JB26 224
BJMI31, BJMI36 225
Lateral jumper bars PC8, PC81 226
Circuit separator CS, CS-R1 227
Shield connectors SHBS, SHB 228
Protecting covers PL 229
CO, KCO 230
Short circuit bridges SC-JB8 231
Test sockets AJS9 232
Pluggable terminal block accessories
End sections EDK, EDS 233-234
Coding pegs COP 235
Locking devices VR 235
PAGE 195
5
1SN
K16
0017
S02
01
PR mounting railCommon terminal block accessories
Description – Pre-punched symmetrical mounting rail, – The slotted holes ease the mounting and allow to use existing and/or numerous fixings, – Particularly well designed for fixing onto back-plates and for terminal assemblies of small dimensions.
Ordering detailsDescription Color Type Part Number Pkg Weight
meter (1 pce) g Prepunched rail PR30 1SNA173220R0500 2 328.00Please note that for all rails: 1 part number equal 1 meter (39 in). Packing of 2 meters (78 in) minimum.Check that your order quantity is a multiple of 2.
Main technical dataMaterial Zinc plating and passivation steelRail TH 35-7.5
IEC UL - CSAEquivalent E-Cu cross sectionAll the main technical data provided are "manufacturer" values.
RoHS
Mounting instructions
– In order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it;
– To prevent the rail from flexing (1 mm 0.039 in rail thickness only), fixing is recommended every 250 mm 9.84 in;
– To prevent any issues during mounting, screw heads used for rail fixing should not protrude from the rail (7,5 mm 0.295 in rail height only).
1SN
K50
0072
F000
0
PR30
2000 mm 78.74 in spacing
Description – Symmetrical mounting rail complying with IEC60715, – Particularly well designed for fixing onto back-plates and for terminal assemblies of small dimensions.
Ordering detailsDescription Color Type Part Number Pkg Weight
meter (1 pce) g PR3.Z2 1SNA174300R1700 2 718.00
Please note that for all rails: 1 part number equal 1 meter (39 in). Packing of 2 meters (78 in) minimum.Check that your order quantity is a multiple of 2.
Main technical dataMaterial Zinc plating and passivation steelRail TH 35-7.5
IEC UL - CSAEquivalent E-Cu cross section 16 mm²All the main technical data provided are "manufacturer" values.
RoHS
Mounting instructions
– In order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it;
– To prevent the rail from flexing (1 mm 0.039 in rail thickness only), fixing is recommended every 250 mm 9.84 in;
– To prevent any issues during mounting, screw heads used for rail fixing should not protrude from the rail (7,5 mm 0.295 in rail height only).
1SN
K50
0073
F000
0
PR3.Z2
2000 mm 78.74 in spacing
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0040
S02
01
PR mounting railCommon terminal block accessories
Description – Symmetrical mounting rail made of galvanised steel, complying with IEC60715, – Particularly well designed for fixing onto back-plates and for terminal assemblies of small dimensions.
Ordering detailsDescription Color Type Part Number Pkg Weight
meter (1 pce) g PR3.G2 1SNA164800R0300 2 718.00
Please note that for all rails: 1 part number equal 1 meter (39 in). Packing of 2 meters (78 in) minimum.Check that your order quantity is a multiple of 2.
Main technical dataMaterial Galvanised steelRail TH 35-7.5
IEC UL - CSAEquivalent E-Cu cross section 16 mm²All the main technical data provided are "manufacturer" values.
RoHS
Mounting instructions
– In order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it;
– To prevent the rail from flexing (1 mm 0.039 in rail thickness only), fixing is recommended every 250 mm 9.84 in;
– To prevent any issues during mounting, screw heads used for rail fixing should not protrude from the rail (7,5 mm 0.295 in rail height only).
1SN
K50
0073
F000
0
PR3.G2
2000 mm 78.74 in spacing
Description – Pre-punched symmetrical mounting rail, – The slotted holes ease the mounting and allow to use existing and/or numerous fixings.
Ordering detailsDescription Color Type Part Number Pkg Weight
meter (1 pce) g Preprunched rail PR50 1SNA178529R0400 2 1288.00Please note that for all rails: 1 part number equal 1 meter (39 in). Packing of 2 meters (78 in) minimum.Check that your order quantity is a multiple of 2.
Main technical dataMaterial Zinc plating and passivation steelRail TH 35-15
IEC UL - CSAEquivalent E-Cu cross sectionAll the main technical data provided are "manufacturer" values.
RoHS
Mounting instructions
– In order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it;
– To prevent the rail from flexing, fixing is recommended every 700 mm 27.6 in;
– In order to increase the accessibility of your terminal assembly, we recommend the use of our rail offset brackets EM45 (order code 1SNA008521R2600) for a 45° orientation of the rail.
1SN
K50
0074
F000
0
PR50
2000 mm 78.74 in spacing
PAGE 197
Technical data valid for copper conductors only.
5
1SN
K16
0041
S02
01
PR mounting railCommon terminal block accessories
Description – Symmetrical mounting rail.
Ordering detailsDescription Color Type Part Number Pkg Weight
meter (1 pce) g PR5 1SNA168700R2200 2 1200.00
Please note that for all rails: 1 part number equal 1 meter (39 in). Packing of 2 meters (78 in) minimum.Check that your order quantity is a multiple of 2.
Main technical dataMaterial Zinc plating and passivation steelRail TH 35-15
IEC UL - CSAEquivalent E-Cu cross sectionAll the main technical data provided are "manufacturer" values.
RoHS
Mounting instructions
– In order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it;
– To prevent the rail from flexing, fixing is recommended every 700 mm 27.6 in;
– In order to increase the accessibility of your terminal assembly, we recommend the use of our rail offset brackets EM45 (order code 1SNA008521R2600) for a 45° orientation of the rail.
1SN
K50
0075
F000
0
PR5
2000 mm 78.74 in spacing
Description – Symmetrical mounting rail complying with IEC60715, – The rigidity of the rail is maximised by the 2.3 mm 0.090 in thickness of the rail, and by its solid, non slotted construction,
– PR4 TH 35-15 is the most rigid mounting rail solution and it can suppo
Ordering detailsDescription Color Type Part Number Pkg Weight
meter (1 pce) g Recommended for SNK ground terminal blocks up to 35 mm² 2 AWG
PR4 1SNA168500R1200 2 915.00
Please note that for all rails: 1 part number equal 1 meter (39 in). Packing of 2 meters (78 in) minimum.Check that your order quantity is a multiple of 2.
Main technical dataMaterial Zinc plating and passivation steelRail TH 35-15
IEC UL - CSAEquivalent E-Cu cross section 50 mm² 2 AWGAll the main technical data provided are "manufacturer" values.
RoHS
Mounting instructions
– In order to guarantee the performances and security of your installation, please ensure the rail and its fixings can withstand the static and dynamic loads of the components mounted on it;
– To prevent the rail from flexing, fixing is recommended every 700 mm 27.6 in;
– In order to increase the accessibility of your terminal assembly, we recommend the use of our rail offset brackets EM45 (order code 1SNA008521R2600) for a 45° orientation of the rail.
1SN
K50
0076
F000
0
PR4
2000 mm 78.74 in spacing
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0026
S02
01
Screw end stopsCommon terminal block accessories
1SN
K16
0333
V00
14
BAM4
53.6 2.11"
43.7
1.7
2"
26.8 1.06"
36.2
1.4
2"
10 mm 0.394 in spacing
Mounting instructions
BAM4 screw end stopsDescription – Give efficient support to the SNK terminal blocks assemblies thanks to the BAM4 double gripping rail contact, – Ease the assemblies identification with the BAM4 marking location compatible with all SNK markers and labels.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 10 mm 0.394 in spacing Dark grey BAM4 1SNK900001R0000 50 14.00
Main technical data Mounting instructionsMaterial specifications Insulating material Polyamide Rail TH 35-7.5,
TH 35-15Flammability V0NF F 16 101 I2F2 Tool Flat screwdriver
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 5.5 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.217 in
Installing -5 ... +40 °C +23 ... +104 °F Torque 0.9 Nm ± 0.17.08 lb.in ± 0.88
All the main technical data provided are "manufacturer" values
RoHS
BAZH1 screw end stopsDescription – Give efficient support to the SNK double deck or power terminal blocks assemblies thanks to the BAZH1 double gripping rail contact,
– Ease the assemblies identification with label holders.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 10 mm 0.394 in spacing Dark grey BAZH1 1SNK900102R0000 20 24.00
Main technical data Mounting instructionsMaterial specifications Insulating material Polyamide Rail TH 35-7.5
Flammability V0NF F 16 101 I2F2 Tool Flat screwdriver
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 5.5 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.217 in
Installing -5 ... +40 °C +23 ... +104 °F Torque 1.3 Nm ± 0.111.4 lb.in ± 0.88
All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0094
F001
4
BAZH1
74.4 2.93"
73.2
2.8
8"
37.2 1.46"
65.7
2.5
9"
10 mm 0.394 in spacing
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Terminal block markers compatible with MG3 White MG-CPM 13 41791 1SNB041791R0612 1680 0.27Blank card In polycarbonate MC812 1SNK160000R0000 22 10.00
In polyamide MC812PA 1SNK169999R0000 20 14.00Label holder 10 mm 0.394 in width Dark grey LH 1SNK900605R0000 50 0.60
19.5 mm 0.768 in width LH-R1 1SNK900607R0000 50 1.10Universal wire markers holder 5.2 mm 0.205 in spacing Grey UMH 1SNK900611R0000 10 0.20
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Terminal block markers compatible with MG3 White MG-CPM 13 41791 1SNB041791R0612 1680 0.27Blank card In polycarbonate MC812 1SNK160000R0000 22 10.00
In polyamide MC812PA 1SNK169999R0000 20 14.00Label holder 10 mm 0.394 in width Dark grey LH 1SNK900605R0000 50 0.60
19.5 mm 0.768 in width LH-R1 1SNK900607R0000 50 1.10Universal wire markers holder 5.2 mm 0.205 in spacing Grey UMH 1SNK900611R0000 10 0.20
PAGE 199
Technical data valid for copper conductors only.
5
1SN
K16
0002
S02
01
Screwless end stopsCommon terminal block accessories
1SN
K16
0247
V00
14
BAZ1
35.7
1.4
3"
43.2
1.7
2"
24.2 0.95"
53.5 2.11"
34.2
/ 1
.35"
5.2 mm 0.205 in spacing
BAZ1 screwless end stopsDescription – Reduce the size of your terminal block assemblies with the screwless reduced spacing BAZ1 end stop, – Ease the assemblies identification with various markers and label holders.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 5.2 mm 0.205 in spacing Dark grey BAZ1 1SNK900002R0000 50 5.30
Main technical data Mounting instructionsMaterial specifications Insulating material Polyamide Rail TH 35-7.5
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Terminal block markers compatible with MG3 White MG-CPM 13 41790 1SNB041790R0512 1960 0.23Blank card compatible with HTP500 MC512 1SNK140000R0000 22 9.00
compatible with AMS600 MC512PA 1SNK149999R0000 20 10.00Label holder 10 mm 0.394 in width Dark grey LH 1SNK900605R0000 50 0.60
19.5 mm 0.768 in width LH-R1 1SNK900607R0000 50 1.10Universal wire markers holder 5.2 mm 0.205 in spacing Grey UMH 1SNK900611R0000 10 0.20
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0023
S02
01
Label holderCommon terminal block accessories
1SN
K16
0334
V00
14
LH
10 mm 0.394 in spacing
LH label holderDescription – Easily identify your terminal blocks assembly with white or yellow labels, – Adjustable in height for best visibility, – Compatible with all SNK end stops.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 10 mm 0.394 in width Dark grey LH 1SNK900605R0000 50 0.60
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
LH-R1 label holderDescription – Easily identify your terminal blocks assembly with white or yellow labels, – Adjustable in height for best visibility, – Compatible with all SNK end stops.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 19.5 mm 0.768 in width Dark grey LH-R1 1SNK900607R0000 50 1.10
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0335
V00
14
LH
19.5 mm 0.768 in spacing
Mounting instructions
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Self-adhesive precut blank label compatible with HTP500 White MCLH 1SNK900630R0000 25 10.00Self-adhesive precut blank label
compatible with HTP500 White RCPEAD-TT 1SNA235158R0100 25 9.80Yellow RCPEAD-TT-YL 1SNA235159R0200 25 12.10
Pre-printed cover marker Protection for RCPEAD markers Transparent EPR2 1SNA399726R0700 10 4.00Precut blank label compatible with MG3 White MG-TAR 45490 1SNB045490R8530 1650 0.371Self-adhesive precut blank label
compatible with MG3 Yellow MG-TAA 49448 1SNB049448R8530 825 0.55White MG-TAA 49498 1SNB049498R8530 825 0.55
Self-adhesive precut blank label compatible with HTP500 Yellow MCLH-YL 1SNK900633R0000 25 10.00
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Self-adhesive precut blank label compatible with HTP500 White MCLH-R1 1SNK900631R0000 25 10.00Precut blank label compatible with AMS600 White RCPEB 1SNA178430R0500 1
Protection for RCPEB markers Transparent EPR1 1SNA178431R2200 1 0.05Self-adhesive precut blank label
compatible with HTP500 White PIB2-TT 1SNA235155R2600 25 9.70Yellow PIB2-TT-YL 1SNA235157R2000 25 9.40
Precut blank label compatible with MG3 White MG-TAR 45194 1SNB045194R1735 900 0.62Self-adhesive precut blank label
Yellow MG-TAA 49148 1SNB049148R1735 450 0.91White MG-TAA 49198 1SNB049198R1735 450 0.91
Self-adhesive precut blank label compatible with HTP500 Yellow MCLH-R1-YL 1SNK900634R0000 25 10.00
PAGE 201
Technical data valid for copper conductors only.
5
1SN
K16
0096
S02
01
Label holderCommon terminal block accessories
LH-J label holderDescriptionEasily identify your block with three standard 5.2 mm 0.205 in spacing SNK markers. It fits in the jumper channel of the SNK terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Rotating label holder with three SNK markers housings - 4.8 mm 0.189 in spacing
Dark grey LH-J 1SNK900606R0000 100 0.73
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0347
V00
14
LH
4.8 mm 0.189 in spacing
94.5
3.7
"
87 3
.4"
44.9 1.73"
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Blank marker compatible with MG3 White MG-CPM 13 41790 1SNB041790R0512 1960 0.23Blank card compatible with HTP500 White MC512 1SNK140000R0000 22 9.00
compatible with AMS600 White MC512PA 1SNK149999R0000 20 10.00Universal wire markers holder 5.2 mm 0.205 in spacing Grey UMH 1SNK900611R0000 10 0.20
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0027
S02
01
JB5 screwless jumper barsCommon terminal block accessories
1SN
K16
0143
F001
4
JB5
5.2 mm 0.205 in spacing
Mounting instructions1 - Standard use
2 - Cut extremitiesFor voltage rating > 50 V and Uimp > 2.5 KV, the below accessories must be installed on the cut side of the jumper to guarantee IP20 and voltage rating:
ZS... Feed-through CS circuit separatorDouble deck / triple deck ES… end section
ZK… All functions EK… end section
Ensure a good straight cut by positioning the cutting tool on the vertical snicks of the insulated part of the jumper.
15 poles max. recommended for convenient mounting.
3 - Cut poles
4 - Alternated poles
5 - Alternated poles with cut extremitiesWhen using cut jumpers, cut extremities should be placed oppositely to allow end sections / circuit separators place-ment at each cut extremities.
For all other applications, please consult us.
DescriptionFacilitate & secure your jumper bar assembly process: – Screwless mounting, – Pre-cut poles for alternated jumpering between terminal blocks, – Insulated, – Positive locking, – Perfectly adapted to low level electrical contact (20mA, 50mV).
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 5.2 mm 0.205 in spacing 2 poles Orange JB5-2 1SNK905302R0000 50 1.30
3 poles JB5-3 1SNK905303R0000 50 2.004 poles JB5-4 1SNK905304R0000 50 2.705 poles JB5-5 1SNK905305R0000 50 3.5010 poles JB5-10 1SNK905310R0000 30 7.1050 poles JB5-50 1SNK905350R0000 10 36.00
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F3
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSA Ex eRated current 32 A 30 ARated voltage 1 - Standard use 1000 V 600 V Please
2 - Cut extremities 800 V 300 V consult3 - Cut poles 630 V 300 V us4 - Alternated poles 400 V 150 V5 - Alternated poles
with cut extremities400 V 150 V
Impulse withstand voltage 8000 VProtection IP20 NEMA 1All the main technical data are indicative “manufacturer” values.
RoHS
PAGE 203
Technical data valid for copper conductors only.
5
1SN
K16
0029
S02
01
JB6 screwless jumper barsCommon terminal block accessories
1SN
K16
0143
F001
4
JB6
6 mm 0.236 in spacing
Mounting instructions1 - Standard use
2 - Cut extremitiesFor voltage rating > 50 V and Uimp > 2.5 KV, the below accessories must be installed on the cut side of the jumper to guarantee IP20 and voltage rating:
ZS... Feed-through CS circuit separatorDouble deck / triple deck ES… end section
ZK… All functions EK… end section
Ensure a good straight cut by positioning the cutting tool on the vertical snicks of the insulated part of the jumper.
15 poles max. recommended for convenient mounting.
3 - Cut poles
4 - Alternated poles
5 - Alternated poles with cut extremitiesWhen using cut jumpers, cut extremities should be placed oppositely to allow end sections / circuit separators place-ment at each cut extremities.
For all other applications, please consult us.
DescriptionFacilitate & secure your jumper bar assembly process: – Screwless mounting, – Pre-cut poles for alternated jumpering between terminal blocks, – Insulated, – Positive locking, – Perfectly adapted to low level electrical contact (20mA, 50mV).
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 6 mm 0.236 in spacing 2 poles Orange JB6-2 1SNK906302R0000 50 1.30
3 poles JB6-3 1SNK906303R0000 50 2.104 poles JB6-4 1SNK906304R0000 50 2.905 poles JB6-5 1SNK906305R0000 50 3.6010 poles JB6-10 1SNK906310R0000 20 7.4050 poles JB6-50 1SNK906350R0000 10 38.10
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F3
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSA Ex eRated current 41 A 30 ARated voltage 1 - Standard use 1000 V 600 V Please consult
2 - Cut extremities 800 V 300 V our dedicated 3 - Cut poles 630 V 300 V certificates4 - Alternated poles 400 V 150 V5 - Alternated poles
with cut extremities400 V 150 V
Impulse withstand voltage 8000 VProtection IP20 NEMA 1All the main technical data are indicative “manufacturer” values.
RoHS
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0030
S02
01
JB8 screwless jumper barsCommon terminal block accessories
1SN
K16
0146
F001
4
JB8
8 mm 0.315 in spacing
Mounting instructions1 - Standard use
2 - Cut extremitiesFor voltage rating > 50 V and Uimp > 2.5 KV, the below accessories must be installed on the cut side of the jumper to guarantee IP20 and voltage rating:
ZS... Feed-through CS circuit separatorDouble deck / triple deck ES… end section
ZK… All functions EK… end section
Ensure a good straight cut by positioning the cutting tool on the vertical snicks of the insulated part of the jumper.
3 - Cut poles
4 - Alternated poles
5 - Alternated poles with cut extremitiesWhen using cut jumpers, cut extremities should be placed oppositely to allow end sections / circuit separators place-ment at each cut extremities.
For all other applications, please consult us.
DescriptionFacilitate & secure your jumper bar assembly process: – Screwless mounting, – Pre-cut poles for alternated jumpering between terminal blocks, – Insulated, – Positive locking, – Perfectly adapted to low level electrical contact (20mA, 50mV).
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 8 mm 0.315 in spacing 2 poles Orange JB8-2 1SNK908302R0000 50 2.70
3 poles JB8-3 1SNK908303R0000 50 4.104 poles JB8-4 1SNK908304R0000 50 5.605 poles JB8-5 1SNK908305R0000 40 7.0010 poles JB8-10 1SNK908310R0000 20 14.20
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F3
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSA Ex eRated current 57 A 42 ARated voltage 1 - Standard use 1000 V 600 V 693 V
2 - Cut extremities 800 V 300 V 440 V3 - Cut poles 630 V 300 V 440 V4 - Alternated poles 630 V 150 V 352 V5 - Alternated poles
with cut extremities630 V 150 V 352 V
Impulse withstand voltage 6000 VProtection IP20 NEMA 1All the main technical data are indicative “manufacturer” values.
RoHS
PAGE 205
Technical data valid for copper conductors only.
5
1SN
K16
0031
S02
01
JB10 screwless jumper barsCommon terminal block accessories
1SN
K16
0146
F001
4
JB10
10 mm 0.394 in spacing
Mounting instructions1 - Standard use
2 - Cut extremitiesFor voltage rating > 50 V and Uimp > 2.5 KV, the below accessories must be installed on the cut side of the jumper to guarantee IP20 and voltage rating:
ZS... Feed-through CS circuit separatorDouble deck / triple deck ES… end section
ZK… All functions EK… end section
Ensure a good straight cut by positioning the cutting tool on the vertical snicks of the insulated part of the jumper.
3 - Cut poles
4 - Alternated poles
5 - Alternated poles with cut extremitiesWhen using cut jumpers, cut extremities should be placed oppositely to allow end sections / circuit separators place-ment at each cut extremities.
For all other applications, please consult us.
DescriptionFacilitate & secure your jumper bar assembly process: – Screwless mounting, – Pre-cut poles for alternated jumpering between terminal blocks, – Insulated, – Positive locking, – Perfectly adapted to low level electrical contact (20mA, 50mV).
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 10 mm 0.394 in spacing 2 poles Orange JB10-2 1SNK910302R0000 50 4.60
3 poles JB10-3 1SNK910303R0000 50 7.104 poles JB10-4 1SNK910304R0000 40 9.405 poles JB10-5 1SNK910305R0000 30 12.0010 poles JB10-10 1SNK910310R0000 20 24.00
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F3
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSA Ex eRated current 76 A 67 ARated voltage 1 - Standard use 1000 V 600 V 693 V
2 - Cut extremities 800 V 300 V 440 V3 - Cut poles 630 V 300 V 440 V4 - Alternated poles 400 V 150 V 275 V5 - Alternated poles
with cut extremities250 V 150 V 176 V
Impulse withstand voltage 6000 VProtection IP20 NEMA 1All the main technical data are indicative “manufacturer” values.
RoHS
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0071
S02
01
JB12 screwless jumper barsCommon terminal block accessories
1SN
K16
0239
V00
14
JB12
12 mm 0.472 in spacing
Mounting instructions1 - Standard use
2 - Cut extremitiesFor voltage rating > 50 V and Uimp > 2.5 KV, the below accessories must be installed on the cut side of the jumper to guarantee IP20 and voltage rating:
ZS... Feed-through CS circuit separatorDouble deck / triple deck ES… end section
ZK… All functions EK… end section
Ensure a good straight cut by positioning the cutting tool on the vertical snicks of the insulated part of the jumper.
3 - Cut poles
4 - Alternated poles
5 - Alternated poles with cut extremitiesWhen using cut jumpers, cut extremities should be placed oppositely to allow end sections / circuit separators place-ment at each cut extremities.
For all other applications, please consult us.
DescriptionFacilitate & secure your jumper bar assembly process: – Screwless mounting, – Pre-cut poles for alternated jumpering between terminal blocks, – Insulated, – Positive locking, – Perfectly adapted to low level electrical contact (20mA, 50mV).
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 12 mm 0.472 in spacing 2 poles Orange JB12-2 1SNK912302R0000 50 4.90
3 poles JB12-3 1SNK912303R0000 50 7.605 poles JB12-5 1SNK912305R0000 20 12.90
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSA Ex eRated current 76 A 67 ARated voltage 1 - Standard use 1000 V 600 V 693 V
2 - Cut extremities 800 V 300 V 440 V3 - Cut poles 630 V 300 V 440 V4 - Alternated poles 320 V 150 V 220 V5 - Alternated poles
with cut extremities250 V 150 V 176 V
Impulse withstand voltage 6000 VProtection IP20 NEMA 1All the main technical data are indicative “manufacturer” values.
RoHS
PAGE 207
Technical data valid for copper conductors only.
5
1SN
K16
0054
S02
01
JB85-3 cross spacing jumpers Common terminal block accessories
1SN
K16
0125
F001
4
JB85
8 mm 0.315 in spacing
Description – Allows power distribution between terminal blocks with different spacing, – JB5-3, JB6-3 and JB8-3 can be used as cross spacing jumpers (see selection table on mounting instruc-tions below).
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Cross spacing jumpers 3 poles Orange JB85-3 1SNK900603R0000 10 2.80
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F3
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSA Ex eRated current 32 A 30 ARated voltage Standard use 1000 V 600 V Please consult
Cut extremities 800 V 300 V our dedicated Cut poles 630 V 300 V certificates
Impulse withstand voltage 8000 VProtection IP20 NEMA 1All the main technical data provided are "manufacturer" values
RoHS
Mounting instructions
Cross spacing jumper selection between A and B terminal blocks with different spacing.
A5.2 mm 6 mm 8 mm
6 mm JB5.3 - -8 mm JB85.3 JB85.3 -10 mm JB85.3 JB85.3 JB8.312 mm JB85.3 JB6.3 -
B
Yellow cell: for ZS and ZK terminal blocks
Blue cell: for ZS terminal blocks only
I maxI1 max I2 max
I1 max + I2 max ≤ I max I max I1 max ≤ I rated terminal block I2 max
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0036
S02
01
Test adaptersCommon terminal block accessories
TP2 test adaptersDescription – Insulated test adapter that enables individual voltage control, – Direct plug-in solution into the jumpers channels, – Compatible with standard isolated or non isolated test plugs DIA 2 mm 0.079 in and 2.3 mm 0.090 in, – Withstand more than 10000 operations according to TE Connectivity test standards.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g For test plugs DIA 2 mm 0.079 in Dark grey TP2 1SNK900203R0000 20 1.70
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSA Ex eRated current 10 ARated voltage Standard use 1000 V 600 V Not authorizedImpulse withstand voltage 8000 VProtection IP20 NEMA 1All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0093
V00
14
TP
7.6 mm 0.299 in spacing
Mounting instructions
✔
TP4 test adaptersDescription – Isolated test adapter that enables individual voltage control, – Direct plug-in solution into the jumpers channels, – Compatible with standard insulated or non isolated test plugs DIA 4 mm 0.157 in, – Withstand more than 10000 operations according to TE Connectivity test standards.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g For test plugs DIA 4 mm 0.157 in Dark grey TP4 1SNK900205R0000 20 2.40
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSA Ex eRated current 16 ARated voltage Standard use 1000 V 600 V Not authorizedImpulse withstand voltage 8000 VProtection IP20 NEMA 1All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0093
V00
14
TP
7.6 mm 0.299 in spacing
Mounting instructions
✔
PAGE 209
Technical data valid for copper conductors only.
5
1SN
K16
0042
S02
01
TC5 test connectorsCommon terminal block accessories
5.2 mm 0.205 in spacing
DescriptionEase the testing of terminal block assemblies: – Make your own test connector assembly with our modular solution mixing various spacings, – Direct plug-in solution into the jumpers channels, – Withstand more than 10000 operations according to TE Connectivity test standards.
Main technical data Mounting instructionsConnecting capacity IEC UL - CSA Rail
1 conductor per clamp
Rigid - Solid / Stranded 0.2 ... 1.5 mm² Wire stripping length
8 mmFlexible 0.22 ... 1.5 mm² 0.314 inwith non insulated ferrulewith insulated ferrule 0.22 ... 1.5 mm²Gauge A1-B1
2 conductors per clamp
Rigid - Solid / Stranded 0.2 ... 0.75 mm² Tool Flat screwdriverFlexible 0.22 ... 0.75 mm² Ø 2.5 mmwith twin ferrule 0.22 ... 0.75 mm² Ø 0.098 in
Rated current / Rated cross section 16 A / 1.5 mm² Rated short-time withstand current (1s) 180 A Torque 0.5 Nm ± 0.1Rated voltage 1000 V 3.43 lb.in ± 0.885Impulse withstand voltage 8000 VProtection IP20 NEMA 1
The connecting capacity data for one Rigid - Solid / Stranded - Flexible conductor (when applicable) is a mandatory information required by IEC, UL and CSA standards (Copper conductors).All other data are provided as supplementary information only. For more details, please consult our CB, UL or CSA certificates and technical datasheet available on http://www.TE.com
Material specifications Insulating material PolyamideFlammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °FAll the main technical data provided are "manufacturer" values
RoHS
Ordering detailsTest connectors for 5.2 mm 0.205 in spacing terminal blocks
Description Color Type Part Number Pkg Weightqty (1 pce) g
Test connectors 5.2 mm 0.205 in spacing Dark grey TC5 1SNK900200R0000 10 5.20End module, 5.2 mm 0.205 in TC5-R1 1SNK900201R0000 10 5.20
ES-TC6
TC5-R1TC5
ES-TC8
10 poles max.
TC5-R1
TC5
ES-TC6
10 poles max.
TC5-R1
TC5-R1 TC5
ES-TC8
10 poles max.
PT-3
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Cable clamps Fit on two C2.5-ZDP plugs and on TC5 test connectors Dark grey PT-3 1SNK900625R0000 20 1.00Terminal block markers
Blank marker White MG-CPM 13 41790 1SNB041790R0512 1960 0.23Blank card MC512 1SNK140000R0000 22 9.00
MC512PA 1SNK149999R0000 20 10.00Universal wire markers holder Grey UMH 1SNK900611R0000 10 0.20
Ordering detailsTest connectors for 6 mm 0.236 in spacing terminal blocks
Description Color Type Part Number Pkg Weightqty (1 pce) g
Test connectors End module, 5.2 mm 0.205 in Dark grey TC5-R1 1SNK900201R0000 10 5.20Spacers 0.8 mm 0.031 in spacing ES-TC6 1SNK900105R0000 10 0.80
Ordering detailsTest connectors for 8 mm 0.315 in spacing terminal blocks
Description Color Type Part Number Pkg Weightqty (1 pce) g
Test connectors 5.2 mm 0.205 in spacing Dark grey TC5 1SNK900200R0000 10 5.20End module, 5.2 mm 0.205 in TC5-R1 1SNK900201R0000 10 5.20
Spacers 2.8 mm 0.110 in spacing ES-TC8 1SNK900104R0000 10 1.40
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0039
S02
01
Component plugsCommon terminal block accessories
PG5-R2 component plugsDescription – Component holder compatible with 5.2 mm 0.205 in spacing ZS4 feed-through terminal blocks, – Fit components 16 x 16 x 8.5 mm 0.630 x 0.630 x 0.335 in (not supplied with plug) such as resistors, di-odes, varistance,
– Direct plug-in into the terminal blocks jumper channels, – Maximum dissipatived power: 2 W.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Components insertion between 2 blocks Dark grey PG5-R2 1SNK900403R0000 20 8.00
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSARated currentRated voltage 250 VImpulse withstand voltage 4000 VProtection IP20 NEMA 1All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0112
F001
4
37.7 1.48"
48.9
1.9
2"
18.9 .74"
27.8
1.0
9"
PG5
9.95 mm 0.392 in spacing
Mounting instructions
– Open the PG5-R2 with a flat screw-driver DIA . 3.5 mm 0.138 in,
– Use a soldering iron to fix your component, – Close the PG5-R2, – Plug-in in the terminal blocks jumper
channels.
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Terminal block markers White MG-CPM 13 41790 1SNB041790R0512 1960 0.23Blank card In polycarbonate MC512 1SNK140000R0000 22 9.00
Blank card MC512PA 1SNK149999R0000 20 10.00Universal wire markers holder 5.2 mm 0.205 in spacing Grey UMH 1SNK900611R0000 10 0.20
PAGE 211
Technical data valid for copper conductors only.
5
1SN
K16
0037
S02
01
Component plugsCommon terminal block accessories
PG5 component plugsDescription – Ease the components installation ( components not supplied with plug ) with our quick plug-in mounting system which avoids soldering process,
– Accept 8.8 x 3.2 mm 0.346 x 0.125 in components such as resistors, diodes or subminiature fuses (fully encapsulated),
– Maximum dissipatived power: 1 W.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Components in series with circuit Dark grey PG5 1SNK900401R0000 20 3.50
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSARated currentRated voltage 400 V 150 VImpulse withstand voltage 6000 VProtection IP20 NEMA 1All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0022
F001
4
31 1.22"
39 1
.54"
17 .67"
24.6
.97
"
PG5
5.2 mm 0.205 in spacing
Mounting instructions
– Direct plug-in in disconnect with plug terminal block
PG5-R1 disconnect plugsDescriptionAllow disconnect function when associated with the disconnect with plug terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Equipped with linking bar Orange PG5-R1 1SNK900402R0000 20 3.50
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F3
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
IEC UL - CSARated current 18 A 20 ARated voltage 400 V 150 VImpulse withstand voltage 6000 VProtection IP20 NEMA 1All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0120
F001
4
31 1.22"
39 1
.54"
17 .67"
24.6
.97
"
PG5
5.2 mm 0.205 in spacing
Mounting instructions
– PG5-R1 totally inserted: closed circuit, – PG5-R1 inserted in central position:
open circuit, plug secured in isolated central position
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Terminal block markers White MG-CPM 13 41790 1SNB041790R0512 1960 0.23Blank card In polycarbonate MC512 1SNK140000R0000 22 9.00
Blank card MC512PA 1SNK149999R0000 20 10.00Universal wire markers holder 5.2 mm 0.205 in spacing Grey UMH 1SNK900611R0000 10 0.20
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Terminal block markers White MG-CPM 13 41790 1SNB041790R0512 1960 0.23Blank card In polycarbonate MC512 1SNK140000R0000 22 9.00
Blank card MC512PA 1SNK149999R0000 20 10.00Universal wire markers holder 5.2 mm 0.205 in spacing Grey UMH 1SNK900611R0000 10 0.20
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0028
S02
01
ToolsCommon terminal block accessories
1SN
K16
0242
F001
4
TO
TO screwdriversDescriptionFlat head screwdriver
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Insulated screwdriver 1000V IEC dimensions 3.5 x 100 mm 0.138 x 3.94 in
TO3.5-100-INS 1SNK900644R0000 1 37.00
screwdriver 3.5 x 50 mm 0.138 x 1.97 in TO3.5-50 1SNK900640R0000 12 22.00screwdriver 3.5 x 50 mm 0.138 x 1.97 in Angled 60° TO3.5-50-A 1SNK900659R0000 12 21.6screwdriver 4 x 100 mm 0.157 x 3.94 in TO4-100 1SNK900641R0000 1 42.00screwdriver 5.5 x 125 mm 0.216 x 4.92 in TO5.5-125 1SNK900642R0000 1 75.50screwdriver 6.5 x 150 mm 0.256 x 5.90 in TO6.5-150 1SNK900643R0000 1 121.00
1SN
K16
0127
F001
4
PS
PS crimping toolsDescription – Crimp flexible conductors equipped with ferrules from 0.08 to 10 mm² 28 AWG to 7 AWG, – Semi-automatic crimping tool.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 180 mm 7.09 in length PS-3 1SNK900650R0000 1 380.00
PAGE 213
Technical data valid for copper conductors only.
5
1SN
K16
0064
S02
01
1SN
K16
0234
V00
14
EK2.5-3P
EK2.5-3P end sectionsDescription – Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies,
– Compatible with ZK2.5-3P, ZK2.5-PE-3P, ZK4-3P, ZK4-PE-3P, ZK2.5-S..., ZK2.5-SP and ZK2.5-SF... PI-Spring screwless terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2 mm 0.079 in spacing Dark grey EK2.5-3P 1SNK705911R0000 20 2.40
1SN
K16
0235
V00
14
EK2.5-4P
EK2.5-4P end sectionsDescription – Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies,
– Compatible with ZK2.5-4P, ZK2.5-PE-4P, ZK4-4P and ZK4-PE-4P PI-Spring screwless terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2 mm 0.079 in spacing Dark grey EK2.5-4P 1SNK705912R0000 20 2.70
End sectionsPI-Spring terminal block accessories
1SN
K16
0233
V00
14
EK2.5
EK2.5 end sectionsDescription – Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies,
– Compatible with ZK2.5, ZK2.5-PE, ZK4, ZK4-PE, ZK6 and ZK6-PE PI-Spring screwless terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2 mm 0.079 in spacing Dark grey EK2.5 1SNK705910R0000 20 1.80
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °FAll the main technical data provided are "manufacturer" values.
RoHS
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0065
S02
01
1SN
K16
0237
V00
14
EK2.5-D2
EK2.5-D2 end sectionsDescription – Compatible with ZK2.5-D2, ZK2.5-D2-PE, ZK2.5-D1 and ZK2.5-D1-PE PI-Spring screwless terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2 mm 0.079 in spacing Dark grey EK2.5-D2 1SNK705960R0000 20 3.40
1SN
K16
0346
V00
14
EK2.5-T3
EK2.5-T3 end sectionsDescription – Compatible with ZK2.5-T3, ZK2.5-T1, ZK2.5-T1-PE, ZK2.5-L-L-PE and ZK2.5-L-N-PE PI-Spring screwless terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 0.8 mm 0.031 in spacing Dark grey EK2.5-T3 1SNK705961R0000 20 4.76
End sectionsPI-Spring terminal block accessories
1SN
K16
0339
V00
14
EK2.5-S-4P
EK2.5-S-4P end sectionsDescription – Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies,
– Compatible with ZK2.5-S-4P, ZK2.5-SP-4P, ZK2.5-CH-4P... PI-Spring screwless terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2 mm 0.079 in spacing Dark grey EK2.5-S-4P 1SNK705913R0000 20 2.94
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °FAll the main technical data provided are "manufacturer" values.
RoHS
PAGE 215
Technical data valid for copper conductors only.
5
1SN
K16
0095
S02
01
1SN
K16
0238
V00
14
EK10
EK10 end sectionsDescription – Compatible with ZK10, ZK10-PE, ZK16 and ZK16-PE PI-Spring screwless terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2 mm 0.079 in spacing Dark grey EK10 1SNK710910R0000 20 3.30
1SN
K16
0318
V00
14
EK10-3P
EK10-3P end sectionsDescription – Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies,
– Compatible with ZK10-3P, ZK10-PE-3P, ZK16-3P, ZK16-PE-3P... PI-Spring screwless terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2 mm 0.079 in spacing Dark grey EK10-3P 1SNK710911R0000 20 4.5
End sectionsPI-Spring terminal block accessories
1SN
K16
0236
V00
14
EK6-3P
EK6-3P end sectionsDescription – Compatible with ZK6-3P and ZK6-PE-3P PI-Spring screwless terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2 mm 0.079 in spacing Dark grey EK6-3P 1SNK708911R0000 20 2.80
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °FAll the main technical data provided are "manufacturer" values.
RoHS
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0072
S02
01
Circuit separatorsPI-Spring terminal blocks accessories
1SN
K16
0240
V00
14
CS-R2
48.7
1.9
2"
61.8 2.67"
3 mm 0.118 in spacing
CS-R2 circuit separatorsDescription – Compact circuits separator solution (only 3mm spacing) which provides a convenient visual identification of the several circuits within terminal assemblies,
– Unique top marking possibility that can replace the conventional solution of "end stop with label holder" for demanding applications with high space constraints, - Compatible with all PI-spring feed-through and ground terminal blocks up to 8 mm spacing,
– Mounting on DIN3-TH35 rail.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 3 mm 0.118 in spacing Dark grey CS-R2 1SNK900106R0000 20 3.80
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Terminal block markers White MG-CPM 13 41791 1SNB041791R0612 1680 0.27Labels Yellow MG-VYT 46415 1SNB046415R0615 5250 0.04
White MG-VYT 46915 1SNB046915R0615 5250 0.05Blank card In polycarbonate White MC612 1SNK150000R0000 22 10.00
Blank card MC612PA 1SNK159999R0000 20 11.00Universal wire markers holder 5.2 mm 0.205 in spacing Grey UMH 1SNK900611R0000 10 0.20
PAGE 217
Technical data valid for copper conductors only.
5
1SN
K16
0098
S02
01
Circuit separatorsPI-Spring terminal blocks accessories
1SN
K16
0241
V00
14
CS-R3
53.7
2.1
1"
98.8 3.89"
3 mm 0.118 in spacing
CS-R3 circuit separatorsDescription – Compact circuits separator solution (only 3mm spacing) which provides a convenient visual identification of the several circuits within terminal assemblies,
– Unique top marking possibility that can replace the conventional solution of "end stop with label holder" for demanding applications with high space constraints,
– Compatible with all single deck PI-spring terminal blocks and ZS10-ST...terminal blocks , – Mounting on DIN3-TH35 rail.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 3 mm 0.118 in spacing Dark grey CS-R3 1SNK900107R0000 20 6.40
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Terminal block markers White MG-CPM 13 41790 1SNB041790R0512 1960 0.23
MG-CPM 13 41791 1SNB041791R0612 1680 0.27Labels Yellow MG-VYT 46415 1SNB046415R0615 5250 0.04
White MG-VYT 46915 1SNB046915R0615 5250 0.05Blank card In polycarbonate White MC512 1SNK140000R0000 22 9.00
Blank card MC512PA 1SNK149999R0000 20 10.00In polycarbonate MC612 1SNK150000R0000 22 10.00Blank card MC612PA 1SNK159999R0000 20 11.00
Universal wire markers holder 5.2 mm 0.205 in spacing Grey UMH 1SNK900611R0000 10 0.20
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0044
S02
01
Shield connectorsPI-Spring terminal block accessories
1SN
K16
0267
F001
4SHBP/SHB
12.2
0.4
8"
116 4.57"
SHBP
128 5.04"
13.6
7 .5
4"
SHB
Mounting instructions – SHBS is directly fixed on the terminal block, – SHB is fixed on the ES4-D2 end section, – SHBP is directly fixed on the terminal block, – Connect the cable shielding on the shielding con-
nector with: – RILS cable ties, – quick-connect (the shield connector needs to be
prepared), – soldering iron.
SHBP/SHB shield connectors for PI-Spring terminal blocksDescription – Ensure the continuity of your shield connection, – Various connection solutions available: RILS cable ties, soldering, quick-connect.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Compatible with ZK2.5 and ZK2.5-S terminal blocks SHBP 1SNK900601R0000 20 4.10Compatible with ZS and ZK double deck terminal blocks SHB 1SNK900602R0000 20 4.90
Main technical dataMaterial specifications Insulating material
FlammabilityNF F 16 101
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
SHBP IEC UL - CSA Ex eRated voltage 100 V 50 VAll the main technical data provided are "manufacturer" values
RoHS
Accessories for screw clamp and PI-Spring terminal blocksDescription Color Type Part Number Pkg Weight
qty (1 pce) g Cable ties For SNK shield connector RILS 1SNK900627R0000 10 0.30
PAGE 219
Technical data valid for copper conductors only.
5
1SN
K16
0061
S02
01
1SN
K16
0229
V00
14
ES6-3S
ES6-3S end sectionsDescription – Compatible with ZS6-3S and ZS6-3S-PE terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2.2 mm 0.087 in spacing Dark grey ES6-3S 1SNK505912R0000 20 2.50
1SN
K16
0230
V00
14
ES6-4S
ES6-4S end sectionsDescription – Compatible with ZS6-4S, ZS6-4S-PE, ZS6-S-4S-T2 and ZS4-PE-R2 terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2.2 mm 0.087 in spacing Dark grey ES6-4S 1SNK505911R0000 20 3.10
1SN
K16
1012
F001
4
ES4-D2
ES4-D2 end sectionsDescription – Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your terminal block assemblies,
– Compatible with double deck screw clamp terminal blocks
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2.55 mm 0.100 in spacing Dark grey ES4-D2 1SNK505960R0000 20 4.10
End sectionsScrew clamp terminal block accessories
1SN
K16
1013
F001
4
ES4
ES4 end sectionsDescription – Unique dark grey color that fits all terminal blocks colours and ease the identification of circuits within your
terminal block assemblies, – Compatible with feed-through, ground and disconnect screw clamp terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2.2 mm 0.087 in spacing Dark grey ES4 1SNK505910R0000 20 2.20
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °FAll the main technical data provided are "manufacturer" values.
RoHS
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0062
S02
01
1SN
K16
1026
F001
4
ES4-SF
ES4-SF end sectionsDescription – Compatible with fuse ZS4-SF1... and disconnect screw clamp terminal blocks ZS4-S-R3.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 1.5 mm 0.059 in spacing Dark grey ES4-SF 1SNK508960R0000 20 1.80
1SN
K16
0231
V00
14
ES4-D2-SF1
ES4-D2-SF1 end sectionsDescription – Compatible with ZS4-D2-SF1 ... terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2.5 mm 0.098 in spacing Dark grey ES4-D2-SF1 1SNK508911R0000 20 5.00
1SN
K16
1072
F001
4
ES10-ST
ES10-ST end sectionsDescription – Unique dark grey color that fits all test disconnect terminal blocks ZS10-ST... and ease the identification of circuits within your terminal block assemblies,
– Also compatible with ZS10-R1 and ZS10-PE-R1.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 2 mm 0.079 in spacing Dark grey ES10-ST 1SNK508910R0000 20 3.5
End sectionsScrew clamp terminal block accessories
1SN
K16
0232
V00
14
ES4-T3
ES4-T3 end sectionsDescription – Compatible with ZS4-T3 terminal block.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 0.8 mm 0.031 in spacing Dark grey ES4-T3 1SNK505961R0000 20 4.20
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °FAll the main technical data provided are "manufacturer" values.
RoHS
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Circuit separators 0 mm 0 in spacing Dark grey CS 1SNK900101R0000 20 0.20
PAGE 221
Technical data valid for copper conductors only.
5
1SN
K16
1061
S02
01
Screw jumper barsScrew clamp terminal block accessories
JB8 jumper barsDescriptionInsulated jumper bar with screw mounting.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 8 mm 0.315 in spacing 2 poles Orange JB8-2-R1 1SNK908902R0000 10 7.6
3 poles JB8-3-R1 1SNK908903R0000 10 11.64 poles JB8-4-R1 1SNK908904R0000 10 15.55 poles JB8-5-R1 1SNK908905R0000 10 19.410 poles JB8-10-R1 1SNK908910R0000 10 39.00
Main technical dataMaterial specifications Insulating material Polyamide Rail
Flammability V0NF F 16 101 I2F3 Tool Flat screwdriver
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 3.5 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.138 in
Installing -5 ... +40 °C +23 ... +104 °F Torque 0.7 Nm ± 0.16.2 lb.in ± 0.88
IEC UL - CSA Ex eRated current 50 A 51 ARated voltage Standard use 160 V
Alternated poles Not authorizedImpulse withstand voltageProtection IP20 NEMA 1All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0212
F001
4
JB8
8 mm 0.315 in spacing
Mounting instructions
b
1
2
a
3
1 - Rated voltage: 160 V (IEC) / Not authorized (UL) 2 - Rated voltage: 320 V (IEC) / Not authorized (UL)3 - Rated voltage: 1000 V (IEC) / 300 V (UL)a - End section ES10-STb - End stop BAZ1
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0032
S02
01
Screw jumper barsScrew clamp terminal block accessories
JB16 jumper barsDescriptionInsulated jumper bar with screw mounting.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 16 mm 0.630 in spacing 2 poles Orange JB16-2 1SNK916302R0000 10 10.00
3 poles JB16-3 1SNK916303R0000 10 16.004 poles JB16-4 1SNK916304R0000 10 22.005 poles JB16-5 1SNK916305R0000 10 28.0010 poles JB16-10 1SNK916310R0000 10 56.60
Main technical dataMaterial specifications Insulating material Polyamide Rail
Flammability V0NF F 16 101 I2F3 Tool Flat screwdriver
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 5.5 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.217 in
Installing -5 ... +40 °C +23 ... +104 °F Torque 1.2 Nm ± 0.110.6 lb.in ± 0.885
IEC UL - CSA Ex eRated current 125 A 150 ARated voltage Standard use 1000 V 600 V
Alternated poles Not authorizedImpulse withstand voltage 8000 VProtection IP20 NEMA 1All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0124
F001
4
JB16
16 mm 0.630 in spacing
Mounting instructions
– With flat pliers, cut out the partitions on the terminal block insulating body. Be careful to not cut out the jumpered terminal blocks partitions at both ends of the assembly in order to maintain the IP20, Nema1 protection and insulation,
– Install the jumper bar with the recom-mended tool and torque.
JB22 jumper barsDescriptionScrew jumper bars
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 22 mm 0.866 in spacing 2 poles JB22-2 1SNK922302R0000 5 27.00
3 poles JB22-3 1SNK922303R0000 5 43.305 poles JB22-5 1SNK922305R0000 5 76.1010 poles JB22-10 1SNK922310R0000 5 157.40
Main technical dataMaterial specifications Insulating material Polyamide Rail
FlammabilityNF F 16 101 Tool Allen key
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 4 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.157 in
Installing -5 ... +40 °C +23 ... +104 °F Torque 2 Nm ± 0.417.7 lb.in ± 3.54
IEC UL - CSA Ex eRated current 192 A 175 ARated voltage Standard use 1000 V 600 V 630 V
Alternated poles Not authorizedImpulse withstand voltage 8000 VProtection IP20All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0100
F001
4
JB22
22 mm 0.866 in spacing
Mounting instructions
– With flat pliers, cut out the partitions on the terminal block insulating body. Be careful to not cut out the jumpered terminal blocks partitions at both ends of the assembly in order to maintain the IP20, Nema1 protection and insulation,
– Install the jumper bar with the recom-mended tool and torque.
PAGE 223
Technical data valid for copper conductors only.
5
1SN
K16
0034
S02
01
Screw jumper barsScrew clamp terminal block accessories
JB26 jumper barsDescriptionScrew jumper bars
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 26 mm 1.02 in spacing 2 poles JB26-2 1SNK926302R0000 5 41.20
3 poles JB26-3 1SNK926303R0000 5 65.705 poles JB26-5 1SNK926305R0000 5 115.7010 poles JB26-10 1SNK926310R0000 5 241.50
Main technical dataMaterial specifications Insulating material Rail
FlammabilityNF F 16 101 Tool Allen key
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 4 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.157 in
Installing -5 ... +40 °C +23 ... +104 °F Torque 2 Nm ± 0.417.7 lb.in ± 3.54
IEC UL - CSA Ex eRated current 232 A 230 ARated voltage Standard use 1000 V 600 V 630 V
Alternated poles Not authorizedImpulse withstand voltage 8000 VProtection IP20All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0100
F001
4
JB26
26 mm 1.024 in spacing
Mounting instructions
– With flat pliers, cut out the partitions on the terminal block insulating body. Be careful to not cut out the jumpered terminal blocks partitions at both ends of the assembly in order to maintain the IP20, Nema1 protection and insulation,
– Install the jumper bar with the recom-mended tool and torque.
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0097
S02
01
Screw jumper barsScrew clamp terminal block accessories
BJMI31 jumper barsDescriptionScrew jumper bars
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 31mm 1.220 in spacing 2 poles BJMI31.2 1SNA206053R0700 1 120.00
3 poles BJMI31.3 1SNA206054R0000 1 190.00
Main technical dataMaterial specifications Insulating material Rail
FlammabilityNF F 16 101 Tool Allen key
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 5 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.196 in
Installing -5 ... +40 °C +23 ... +104 °F Torque 3 Nm ± 0.426.55 lb.in ± 3.54
IEC UL - CSA Ex eRated current 309 A 445 ARated voltage Standard use 1000 V 600 V
Alternated poles Not authorizedImpulse withstand voltage 8000 VProtection IP20All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0100
F001
4
BJMI31
31 mm 1.22 in spacing
Mounting instructions
– With flat pliers, cut out the partitions on the terminal block insulating body. Be careful to not cut out the jumpered terminal blocks partitions at both ends of the assembly in order to maintain the IP20, Nema1 protection and insulation,
– Install the jumper bar with the recom-mended tool and torque.
BJMI36 jumper barsDescriptionScrew jumper bars
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 36mm 1.41i7 n spacing 2 poles BJMI36.2 1SNA206126R2500 1 170.00
3 poles BJMI36.3 1SNA206223R0600 1 260.00
Main technical dataMaterial specifications Insulating material Rail
FlammabilityNF F 16 101 Tool Allen key
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 5 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.196 in
Installing -5 ... +40 °C +23 ... +104 °F Torque 3 Nm ± 0.426.55 lb.in ± 3.54
IEC UL - CSA Ex eRated current 415 A 620 ARated voltage Standard use 1000 V 600 V
Alternated poles Not authorizedImpulse withstand voltage 8000 VProtection IP20All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0100
F001
4
BJMI36
36 mm 1.42 in spacing
Mounting instructions
– With flat pliers, cut out the partitions on the terminal block insulating body. Be careful to not cut out the jumpered terminal blocks partitions at both ends of the assembly in order to maintain the IP20, Nema1 protection and insulation,
– Install the jumper bar with the recom-mended tool and torque.
PAGE 225
Technical data valid for copper conductors only.
5
1SN
K16
1060
S02
01
Lateral jumper barsScrew clamp terminal block accessories
PC8 lateral jumper barsDescriptionIP20 Comb jumper bars, – direct insertion in the screw clamp before tightening the screws, above the eventual conductor (if conductor used with ferrule, we recommend the use of long ferrule for optimized mounting ergonomy with test discon-nect terminal blocks),
– Multiple versions available in pre-cut poles for test disconnect terminal blocks applications.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g
Lateral jumper bars8 mm 0.315 in spacing
2 poles Black PC8-2 1SNA116538R1700 10 3.003 poles PC8-3 1SNA116539R1000 10 4.004 poles PC8-4 1SNA116540R2500 10 6.0010 poles PC8-10 1SNA163313R2400 10 14.00
Lateral jumper bars pre-cut poles8 mm 0.315 in spacing
4/6 poles Black PC8-R1 1SNA400711R0600 10 6.604/8 poles PC8-R2 1SNA400712R0700 10 7.804/10 poles PC8-R3 1SNA400713R0000 10 9.003/4 poles PC8-R4 1SNA400724R0300 10 4.504/7 poles PC8-R5 1SNA400842R0000 10 6.602/3 poles PC8-R6 1SNA400843R0000 10 6.604/6 poles PC8-R7 1SNA400849R0000 10 6.604/8 poles PC8-R8 1SNA400850R0000 10 7.80
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F3
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
1SN
C16
0112
F001
4
PC8
8 mm 0.315 in spacing
Mounting instructions for ZS10-ST...
b
1
a
2
1 - Rated voltage: 630 V (IEC) / 150 V (UL)2 - Rated voltage: 630 V (IEC) / 300 V (UL)a - End section ES10-STb - End stop BAZ1
PC81 lateral jumper barsDescriptionComb-type jumper bar, allows the connection of consecutive blocks or not by one compression clamp connection.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 8 mm 0.315 in spacing 10 poles Grey PC81-10 1SNA173523R1100 10 5.00
Main technical dataMaterial specifications Insulating material Brass/polyamide
Flammability V0NF F 16 101 I2F3
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C -23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
1SN
C16
0537
F001
4
PC81
8 mm 0.315 in spacing
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0018
S02
01
Circuit separatorsScrew clamp terminal block accessories
1SN
K16
0002
F001
4
CS
0 mm 0 in spacing
Mounting instructions
CS circuit separatorsDescription – The CS circuit separator avoids the derating of terminal blocks when cut jumper bars JB are used, – Compatible with feed-through terminal blocks up to 16 mm² 4 AWG, – Without spacing loss.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 0 mm 0 in spacing Dark grey CS 1SNK900101R0000 20 0.20
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0003
F001
4
CS-R1
71 2.79"
69 2
.72"
35 1.38"
61.5
2.4
2"
3 mm 0.118 in spacing
Mounting instructions
CS-R1 circuit separatorsDescription – Ease the visual identification of the several circuits within your terminal block assemblies, – Compatible with feed-through terminal blocks up to 35 mm² 0 AWG, – Intermediate cover holder for CO protective cover, – Mounting on DIN3-TH35 rail.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 3 mm 0.118 in spacing Dark grey CS-R1 1SNK900103R0000 20 5.20
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Terminal block markers White MG-CPM 13 41790 1SNB041790R0512 1960 0.23Blank card In polycarbonate MC512 1SNK140000R0000 22 9.00
Blank card MC512PA 1SNK149999R0000 20 10.00Universal wire markers holder 5.2 mm 0.205 in spacing Grey UMH 1SNK900611R0000 10 0.20
PAGE 227
Technical data valid for copper conductors only.
5
1SN
K16
0079
S02
01
Shield connectorsScrew clamp terminal block accessories
1SN
K16
0149
F001
4
SHBS/SHB
128 5.04"
13.6
7 .5
4"
10.8
7 .4
3"94 3.70"
SHB
SHBS
Mounting instructions – SHBS is directly fixed on the terminal block, – SHB is fixed on the ES4-D2 end section, – SHBP is directly fixed on the terminal block, – Connect the cable shielding on the shielding con-
nector with: – RILS cable ties, – quick-connect (the shield connector needs to be
prepared), – soldering iron.
SHBS/SHB shield connectorsDescription – Ensure the continuity of your shield connection, – Various connection solutions available: RILS cable ties, soldering, quick-connect.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Compatible with ZS feed-through terminal blocks SHBS 1SNK900600R0000 20 3.50Compatible with ZS and ZK double deck terminal blocks SHB 1SNK900602R0000 20 4.90
Main technical dataMaterial specifications Insulating material
FlammabilityNF F 16 101
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
SHBS IEC UL - CSA Ex eRated voltage 320 V 125 VAll the main technical data provided are "manufacturer" values
RoHS
Accessories for screw clamp and PI-Spring terminal blocksDescription Color Type Part Number Pkg Weight
qty (1 pce) g Cable ties For SNK shield connector RILS 1SNK900627R0000 10 0.30
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
0021
S02
01
PL protecting coversScrew clamp terminal block accessories
Description – Prohibit access to the screw clamps, – Indicate live circuits.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 5.2 mm 0.205 in spacing Transparent PL5 1SNK900618R0000 10 1.506 mm 0.236 in spacing PL6 1SNK900619R0000 10 1.808 mm 0.315 in spacing PL8 1SNK900620R0000 10 2.6010 mm 0.394 in spacing PL10 1SNK900621R0000 10 3.1016 mm 0.630 in spacing PL16 1SNK900622R0000 10 4.60
Main technical data Mounting instructionsMaterial specifications Insulating material Polycarbonate
Flammability V2NF F 16 101 Tool Flat screwdriver
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 4 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.157 in
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0096
F001
4
PL
Mounting instructions
– The mounting of the PL does not re-quire a screwdriver,
– The dismounting of the PL requires a screwdriver DIA .4 mm 0.160 in, the screwdriver must be positionned in the cover centered hole.
PAGE 229
Technical data valid for copper conductors only.
5
1SN
K16
0045
S02
01
Protecting coversScrew clamp terminal block accessories
1SN
K16
0110
F001
4
CO
77 3.03"
30.2
1.1
9"
Mounting instructionsRestrict access to the circuit by sealing the cover: – Drill on the CO center line at 5 mm 0.197 in from
the extremity with 5 mm 0.197 in diameter drill, – Pass the sealing collar through the CO and KCO holes.
CO protecting coversDescription – Restrict access to your assembly with the protecting cover CO installed with KCO mounting kit (2 end stops, 2 sealing accessories),
– Compatible with SNK feed-through terminal blocks up to 35 mm² 0 AWG.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 1 m 39.4 in length Transparent CO 1SNK900604R0000 1 300.00
Main technical dataMaterial specifications Insulating material PVC
Flammability V0NF F 16 101
Ambient temperature Service IEC 60068-2-1 -55 ... +80 °C -67 ... +176 °Fmin/max Storage -55 ... +80 °C -67 ... +176 °F
Installing -5 ... +40 °C +23 ... +104 °FAll the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0144
F001
4
KCO
74.4 2.93"
73.2
2.8
8"
37.2 1.46"
65.7
2.5
9"
KCO protecting cover kitsDescriptionMount your protecting cover with the KCO versatile mounting kit (2 end stops, 2 sealing accessories): – Maintain the cover, – Reliably seal the access to the terminal assembly if needed, – Use it as well as an end stop.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Mounting kit for cover CO Dark grey KCO 1SNK900624R0000 1 47.80
Main technical dataMaterial specifications Insulating material Polyamide Rail G32, TH 35-7.5,
TH 35-15, TH 15-5.5Flammability V0NF F 16 101 Tool Flat screwdriver
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 4 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.157 in
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
AccessoriesDescription Color Type Part Number Pkg Weight
qty (1 pce) g Protecting cover kits Mounting kit for cover CO Dark grey KCO 1SNK900624R0000 1 47.80Label White PAM43020 1SNA235106R2600 20 27.00
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
1063
S02
01
Short circuit bridgesScrew clamp terminal block accessories
SC-JB8 short circuit bridgesDescription – Allow safe short-circuiting of current Tranformers circuits, – Insulated, – Fully operated by screwdriver, – Short circuited fixed position secured thanks to AJS9 tightening, – Adapted hook shape maintains the bridge on the terminal block in the non short-circuited position, – The orange version can be used as fixed jumpers.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 8 mm 0.315 in spacing 2 poles Yellow SC-JB8-2 1SNK900652R0000 25 2.00
3 poles SC-JB8-3 1SNK900653R0000 25 3.44 poles SC-JB8-4 1SNK900654R0000 25 4.73/5 poles SC-JB8-5 1SNK900655R0000 25 4.73 poles Orange SC-JB8-3-OR 1SNK900657R0000 254 poles SC-JB8-4-OR 1SNK900658R0000 25
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F3
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °F
All the main technical data provided are "manufacturer" values
RoHS
1SN
K16
0221
F001
4
SC-JB8
8 mm 0.315 in spacing
PAGE 231
Technical data valid for copper conductors only.
5
1SN
K16
1064
S02
01
Test socketsScrew clamp terminal block accessories
1SN
C16
0482
F001
4
AJS
4 mm 0.157 in spacing
AJS test socketsDescription – Insulated test sockets,
- Many colors available for circuit identification, - Compatible with standard DIA 4 mm 0.157 in test plugs: - insulated (according to IEC 60101-031) - not insulated (with mobile protection), - Compatible with ZS10-ST…SNK series terminal blocks, M6/8.ST...SNA series terminal blocks, D6/8.ST.RS..Solution series terminal blocks
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Test sockets DIA 4 mm 0.157 in Grey AJS9-GR 1SNA206682R0300 25 3.60
Blue AJS9-BL 1SNA206683R0400 25 3.60Yellow AJS9 1SNA179726R0200 25 3.60Green AJS9-GN 1SNA206681R0200 25 3.60
Red AJS9-RD 1SNA206720R1400 25 3.60Purple AJS9-PR 1SNA206772R0000 25 3.60Brown AJS9-BR 1SNA206782R0000 25 3.60White AJS9-WH 1SNA206765R0000 25 3.60Black AJS9-BK 1SNA206680R1500 25 3.60
Main technical data Mounting instructionsMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F3 Tool Flat screwdriver
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °F Ø 3.5 mmmin/max Storage -55 ... +110 °C -67 ... +230 °F Ø 0.138 in
Installing -5 ... +40 °C +23 ... +104 °F Torque 0.5 Nm ± 0.14.42 lb.in ± 0.88
All the main technical data provided are "manufacturer" values
RoHS
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
5
1SN
K16
4033
S02
01
1SN
K16
4030
V0
014
EDK2.5-21
EDK2.5-21 end sectionsDescription
– Compatible with ZDK2.5-11, ZDK2.5-11-BL and ZDK2.5-11-PE pluggable terminal blocks.
Description Color Type Part Number Pkgqty
Weight1 pce g
1.5 mm 0.059 in spacing Dark grey EDK2.5-21 1SNK805914R0000 20 1.90
1SN
K16
4029
V0
014
EDK2.5-11
EDK2.5-11 end sectionsDescription
– Compatible with ZD2.5-11 pluggable terminal blocks.
Description Color Type Part Number Pkgqty
Weight1 pce g
1.5 mm 0.059 in spacing Dark grey EDK2.5-11 1SNK805915R0000 20 1.49
1SN
K16
4031
V0
014
EDK2.5-D
EDK2.5-D end sectionsDescription
– Compatible with ZDK2.5-D2, ZDK2.5-D2-BL, ZDK2.5-D1, ZDK2.5-D1-PE and ZDK2.5-D2-PE pluggable terminal blocks.
Description Color Type Part Number Pkgqty
Weight1 pce g
2 mm 0.079 in spacing Dark grey EDK2.5-D 1SNK805913R0000 20 3.88
End sectionsPluggable terminal block accessories
1SN
K16
0301
V0
014
EDK2.5-22
EDK2.5-22 end sectionsDescription
– Compatible with ZDK2.5-22 and ZDK4-22 pluggable terminal blocks.
Description Color Type Part Number Pkgqty
Weight1 pce g
2.2 mm 0.087 in spacing Dark grey EDK2.5-22 1SNK805910R0000 20 3.08
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Cmin/max Storage -55 ... +110 °C -67 ... +230 °C
Installing -5 ... +40 °C +23 ... +104 °CAll the main technical data provided are "manufacturer" values.
RoHS
PAGE 233
Technical data valid for copper conductors only.
5
1SN
K16
4034
S02
01
INDUSTRIAL /// ENTRELEC - SNK TERMINAL BLOCKS
Technical data valid for copper conductors only.
End sectionsPluggable terminal block accessories
1SN
K16
4028
V0
014
ED2.5-22
ED2.5-22 end sectionsDescription – Compatible with ZD2.5-22 and ZD2.5-22-PE pluggable terminal blocks.
Ordering detailsDescription Color Type Part Number Pkg
qty
Weight(1 pce) g
2 mm 0.079 in spacing Dark grey ED2.5-22 1SNK805917R0000 20 3.64
1SN
K16
0302
V0
014
EDS4-22
EDS4-22 end sectionsDescription – Compatible with ZDS4-22 pluggable terminal block.
Ordering detailsDescription Color Type Part Number Pkg
qty
Weight(1 pce) g
0.8 mm 0.031 in spacing Dark grey EDS4-22 1SNK805911R0000 20 1.85
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Cmin/max Storage -55 ... +110 °C -67 ... +230 °C
Installing -5 ... +40 °C +23 ... +104 °CAll the main technical data provided are "manufacturer" values.
RoHS
5
1SN
K16
4009
S02
01
1SN
K16
0298
V00
14
COP
COP coding pegsDescription – The coding pegs prevent plugs to be inserted into the wrong circuit.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g Dark grey COP-ZD 1SNK900636R0000 10 3.57
Main technical dataMaterial specifications Insulating material Polyamide
Flammability V0NF F 16 101 I2F2
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °FAll the main technical data provided are "manufacturer" values.
RoHS
Mounting instructions
Coding pegs - Locking devicesPluggable terminal block accessories
1SN
K16
0315
V00
14
VR
9.4 mm 0.370 in spacing
VR locking devicesDescription – Automatic locking providing excellent plug withstand in case of accidental pulling, – Lock safely one or two CDK or CDS plugs on ZDK and ZDS pluggable terminal blocks, – Install one VR... up to 8 poles plugs assembly and two VR... up to 15 poles assembly.
Ordering detailsDescription Color Type Part Number Pkg Weight
qty (1 pce) g 9.4 mm 0.370 in spacing Black VR-ZD 1SNK900637R0000 50 6.5
Main technical dataMaterial specifications Insulating material Polyacetal
Flammability HBNF F 16 101
Ambient temperature Service IEC 60068-2-1 -55 ... +110 °C -67 ... +230 °Fmin/max Storage -55 ... +110 °C -67 ... +230 °F
Installing -5 ... +40 °C +23 ... +104 °FAll the main technical data provided are "manufacturer" values.
RoHS
Mounting instructions
PAGE 235
Technical data valid for copper conductors only.
5