INDUSTRIAL - Beaulieu Fibres€¦ · Flooring Specifications PP Fibres Coarse PP Fibres Dtex 33 -...
Transcript of INDUSTRIAL - Beaulieu Fibres€¦ · Flooring Specifications PP Fibres Coarse PP Fibres Dtex 33 -...
Flooring TechnicalAutomotive Geotextiles
from decorative to heavy duty INDUSTRIAL
Automotive Geotextiles
Reduced weight, lower system cost, enhanced functionalities
• Weight reduction• Dimensional stability• Hydrophobic properties for exteriors• Anti-funghi properties
• Low VOC/VOG emissions (UltraPure)
Lightweight automotive composites Beaulieu Fibres International offers a full range of engineered polypropylene (PP) bonding fibres for thermoplastic lightweight composites. These fibres are designed to provide an optimal cost to performance ratio in needlepunched compression moulded composite materials, when blended with glass, natural or synthetic reinforcement fibres. In answer to the continuous strive of the automotive industry to increase performance and reduce emission, BFI has introduced its UtraLink fibres, a family of customized bonding fibres to improve the mechanical, thermal and functional properties of the composite, and further reduce weight.
Composites• Door panels • Parcel shelves• Wheel arc liner • Air intake duct systems• Head liners • Wall panels• Trunk trim • Load floors • Underbody shields
Specifications PP Fibre
Count 3,3 - 17 dtex
Crimps (per cm) 2 - 6
Cut length (mm) 40 - 90
Colours natural, black
Face fabrics Our colour development department can match any of your OEM colour masters for automotive interior fabrics. The fibre recipe is designed to comply with OEM requirements in terms of UV resistance and flame retardance. Our UltraPure will help you to reach the most stringent VOC/FOG emission targets. Our UltraBond fibres contribute to a fully recyclable system, replacing the use of chemical binders.
Specifications PP Fibre
Count 3,3 - 17 dtex
Crimps (per cm) 2 - 6
Cut length (mm) 40 - 90
Residual shrinkage < 3%
PropertiesFlame retardant functionality, UV resistant,
low VOC/FOG emission
HT fibres for lightweight high-performance nonwoven geotextiles Our high tenacity fibres HT8 offer unique high tensile strength without compromising on elongation. The fibres provide opportunities to reduce geotextile system cost by maximizing machine efficiency, ensuring desired performance and saving weight (up to 15% compared with standard geotextile fibres). We also offer a higher dtex range for environmental applications (TRM) and soil reinforcement.
High tenacity, lightweight, reduced system cost
• Reduce system cost • Maximize machine efficiency by excellent product consistency• High tenacity and tear resistance• Weight savings up to 15%
Civil engineering & construction • Road and railway construction • Erosion control • Waste containment (GCL) • Landscaping
Different levels of UV stability and service life available.
Specifications T5 HT7 HT8 Coarse Fibres
Dtex 6,7– 17 3,3 – 6,7 4,4 – 6,7 77 - 220 - 500
Crimps (per cm) 2 - 5 2 - 5 2 - 5 0,5 - 2,5
Cut length (mm) 60 - 120 60 - 120 60 - 120 60 - 120
Tenacity (cN/tex) ≥ 40 ≥ 48 ≥ 52 ≥ 30
Elongation (%) ≥ 70% ≥ 70% ≥ 70% ≥ 120%
Colours raw white, grey, blackgreen, raw white, beige, others on
request
UltraBond The UltraBond is a patented bonding staple fibre that eliminates the need for latex or other chemical binders to bind nonwovens.It opens up a path to create 100% polypropylene (PP) needlepunched fabrics which meet the same performance requirements as traditional constructions while reducing the end-of-life environmental impact. Using UltraBond, manufacturers now have access to the most versatile bonding fibre available in the market. Ultrabond can be designed to go from a “one size fits all” concept to a customized bonding fibre for a single application maximizing the look and performance of the fabric.
Specifications UltraBond Coarse UltraBond
Dtex 3,3 - 17 33 - 300
Tenacity (cN/tex) ≥ 30
Elongation (%) ≥ 100
Cut length (mm) 45 - 100
Crimps (per cm) 2 - 6 0,5 - 2
UV resistant (Outdoor) ISO 105:B04
Up to 6.000 hrs Up to 10.000 hrs
Activation Temperature >140°C
UltraBond The green way to bond
• Needlepunched fabrics get sustainable• Innovation in thermal bonding• Improved total cost of ownership • Fully recyclable
CO2 REDUCTION
Flooring
Specifications PP Fibres Coarse PP Fibres
Dtex 3,3 - 17 33 - 300
Tenacity (cN/tex) ≥ 30
Elongation (%) ≥ 100
Cut length (mm) 60 - 100
Crimps (per cm) 2 - 6 0,5 - 2
UV resistant (Outdoor) ISO 105:B04
Up to 6.000 hrs Up to 10.000 hrs
Flame retardance Up to BFL-s1 - level possible
Specifications UltraBond Coarse UltraBond
Dtex 3,3 - 17 33 - 300
Tenacity (cN/tex) ≥ 30
Elongation (%) ≥ 100
Cut length (mm) 60 - 100
Crimps (per cm) 2 - 6 0,5 - 2
UV resistant (Outdoor) ISO 105:B04
Up to 6.000 hrs Up to 10.000 hrs
Flame retardance Up to BFL-s1 - level possible
Activation Temperature > 140°C
Fibres for floorcoverings We offer a full dtex range of PP fibres for the production of needle-punched carpet for indoor and outdoor applications. Beaulieu Fibres is an expert in colour development and has the knowledge to provide the appropriate functionalities in terms of colour fastness, abrasion, flame retardance and UV resistance. Our coarse fibres offer good shrinkage control, dimensional stability and high resilience, required for the carpet tile market. UltraBond fibres allow to produce a fully recyclable 100% PP based carpet.
In- & outdoor nonwoven floorcoverings • Trade and event carpets• Contract & Residential• Outdoor & Sports• Automotive
Master colour development, fully recyclable carpet• Dimensional stability• Strong abrasion resistance and high resilience• Stain resistance• Fully recyclable carpet (UltraBond)• Flame retardance• In-house master colour development • UV resistance for outdoor use
Technical Technical
UpholsteryBeaulieu Fibres International offers a standard colour range of fine denier high tenacity PP fibres for lightweight needle punched calandered upholstery and automotive seating fabrics. The fibres are designed to allow optimal coverage at lowest possible weight, while maximizing tear resistance. Optional FR properties can be offered in order to support compliance with BS 5852 / FMVSS302 standards on finished home textiles and automotive interiors.
Upholstery • Furniture • Automotive seating
Dedicated fibre colour collection • Fine denier and optimal coverage • Standard colour collection • Light weight and tear resistance
Standard 100 by OEKO-TEX® Certification N° 1810084 Beaulieu Fibres offers a range of fine PP fibres for use in the furniture and bedding industry, all OEKO-TEX compliant.
Specifications PP Fibre
Dtex 2,8 - 6,7
Tenacity (cN/tex) > 40
Crimps (per cm) 3 - 10
Cut length (mm) 40 - 90
Colours white, beige, brown, grey, black
Compliance OEKO-TEX® 1810084 Centexbel
Optimized filtration performance and efficiency
• Low foaming properties• Tribo-electric charging• Compliant with FDA and European food contact regulation• Unique dust retention capability• Chemical inertia
Air and liquid filtrationBeaulieu Fibres International offers a complete range of mono-component and bi-component fibres for the filtration industry. Our complete range of FDA and European Food Contact compliant staple fibres allows to optimize the filtration performance. By carefully selecting the right blend of different fibre diameters, our fibres enable reaching the perfect balance in limiting pressure drop and maximizing dust retention capability of the filter media. Our latest innovations in terms of fibre shape, composition and tribo-electric charging will help our customers to reach new levels of filtration efficiency.
Specifications Mono Bico | Meralux
Dtex 1,7 - 17 1,3 - 6,7
Crimps (per cm) 2 - 5 5 - 10
Cut length (mm) 40 - 90 40 - 60
Propertiesnon and low foaming
hydrophilic
Hydrophilic, Permanent Hydrophilic, High Wicking Hydrophilic, Hydrophobic
Colour range
Raw white Dull white Beige Camel Brown Stone grey BlackR0000 R1100 B1181 B1184 R8900 R9901 R9990
Air filtrationOur bi-component fibres are designed to offer the best bulk and surface area for thermal bonded filter media in HVAC and Furnace applications. The development of fibres with tribo-electric properties helps to bring dust retention to the next level.
Liquid filtrationOur PP fibres have excellent chemical resistance in the market and can be specified as low foaming. Therefore they are highly suitable for the use in liquid filtration applications including hydraulic, oil and fuel.
Technical
Specifications PP fibres
Fibre diameter 17,5 µ - 19,8 µ ( +/-3%) (equivalent to 2,2 - 2,8 dtex)
Cut lenght (mm) 4 - 6 - 12 - 18 - 24
Specific gravity 0,91 g/cm³
Tensile strenght 35 - 45 cN/Tex (350 - 450 Mpa)
Elastic modulus 5 - 7 Gpa
Finishing hydrophilic
Packagingsmall paper bags: 0,6 to 1 kg
big paper bags: 8 to 25 kgcustomized packaging available
Compliance Standard EN 14889-2 : 2006 for polymer fibres
Excellent cohesion to cement mixtures
• High performing, improve the workability of the matrix• Uniform distribution of stress from plastic and hydraulic
shrinkage, reduce cracking• Improve impact and abrasion resistance • Improve superficial appearance• Improve mechanical characteristics of compressive, tensile and
flexural strength• Excellent resistance to chemical and atmospheric agents, Alkali
resistant
Concrete ReinforcementWe offer Meraflex® short cut fibres for sustainable fibre-reinforced concrete (FRC). Reinforcement by polypropylene (PP) fibres mini-mizes cracking, improves resistance, avoids spallation and therefore prolongs the service lifetime of concrete, cement and mortar constructions substantially. The material is light, safer and quicker to integrate and offers a lower ecological footprint.
The introduction of Meraflex® short cut fibres into concrete, at adequate concentrations, can completely eliminates the risk of
Several studies have shown that the use of Meraflex® short cut fibres, at adequate concentrations in the mortar:• eliminates the formation of cracks;• makes cement mortars of relatively low porosity (W/c 0.55) resistant to attack from carbon dioxide; • makes air-entrained cement mortars resistant to freeze-thaw cycles.
shrinkage cracking in casted products and avoids the spalling phenomena in case of a fire. During fire, the fibre melts at 160°C and creates porosity by which the generated steam can be evacuated. This will decrease the pressure in the construction and avoid spalling problems.
Technical
Resin Transfer Moulding (RTM)Beaulieu Fibres International offers coarse polypropylene (PP) fibres in 65, 70, 110 and 220 dtex especially designed for the production of nonwovens used as resin distribution layer in RTM composite processes. The fibres provide the necessary resilience in order to maximize nonwoven loftiness, while resisting to compression forces in moulding. Our RTM fibres are equiped with a hydrophilic finish, allowing to optimize resin flow distribution throughout the entire mould surface.
Specifications PP Fibre
Dtex 65 - 70 - 110 - 220
Cut length (mm) 75 - 90
Crimps (per cm) 2
Spinfinish 0,80%
Colour Raw white
Res
p. E
d.: B
eaul
ieu
Fibr
es In
tern
atio
nal N
V -
Ooi
gem
stra
at 2
B -
87
10
Wie
lsbe
ke –
Bel
gium
• E
N 0
51
9
Beaulieu Fibres International N.V.Ooigemstraat 2B8710 Wielsbeke, Belgium+32 56 67 43 00 [email protected]
www.beaulieufibres.com
Beaulieu Fibres & YarnsChina Sales OfficeRm 1205-1206, Imago Plaza99 Wuning Road, Shanghai 200063 - China+86 139 6962 [email protected]
Beaulieu Fibres International N.V.US Sales Representative+1 678 860 1336 [email protected]
About Beaulieu Fibres InternationalAs largest European producer of polyolefin fibres, our company is part of the Engineered Products Business Unit of Beaulieu International Group, with headquarters in Belgium.
With three production sites in Europe – two in Belgium and one in Italy, we supply Mono/BICO fibres with round and trilobal cross section with linear densities of 1.0 to 500 dtex to customers in industries such as Automotive, Hygiene, Geotextiles, Flooring, Filtration and Upholstery. Our broad portfolio includes coloured fibres, bonding fibres, high tenacity fibres, ultrasoft fibres with different cross-sections, including trilobal, suitable for a wide range of processing technologies.
Member of Beaulieu International GroupBeaulieu International Group is a well-respected industrial group with headquarters in Belgium. It holds an important market position both in the production of raw materials and intermediate goods, and the supply of perfectly finished floorcoverings. Beaulieu International Group has more than 5,000 employees in 27 plants, 16 representative offices and distribution centres spread across 16 countries. In 2018, the turnover was close to €2 billion.
Beaulieu International Group is composed of three business units. ‘Flooring Solutions’, is a worldwide leader in wall-to-wall floorcoverings (carpet, needle felt, artificial grass, cushion vinyl, vinyl planks, laminate, parquet, wall panels and mats). A second business Unit, ‘Polymers’, produces polypropylene granules for numerous applications. The third business unit ‘Engineered Products’, houses the activities related to ‘Fibres’, ‘Yarns’, ‘Technical Textiles’ and ‘Technical Sheets’. The Beaulieu International Group’s entrepreneurial spirit and innovative ambitions make it the model of diversity and evolution within the sector. They allow it to create added value sustainably for customers, employees, suppliers, shareholders and for the society in which it operates.