INDUSTRIAL AUTOMATION FROM ONE PROVIDER EAST ELECTRIC 1 SYSTEMINTEGRATOR & SALES PARTNER.
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
-
Upload
cooper-sears -
Category
Documents
-
view
35 -
download
0
description
Transcript of INDUSTRIAL AUTOMATION FROM ONE PROVIDER
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
EAST ELECTRIC
1
SYSTEMINTEGRATOR & SALES PARTNER
2
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
CC-ErgoSpin
3
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Quality
Efficiency
Energy costs
Warranty costs
Flexibility
Ergonomics
Cycle time CC-ErgoSpin
Many challenges - one solution
4
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Grip design according latest findings in ergonomics research
Clearly visble LEDs for OK/NOK indication
securely coded angle headsto avoid mix-ups
Same cable connection as ErgoSpin
Robust outer shellfor demandingwork environments
Outward Appearance
5
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Inner Values• Availability Champion
• Waste Minimizer
• Process Optimizer
• Employee Protector
• Environmental Acitivist
• Cost Reducer
• Team Player
6
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
• Tested under full load for 1 Mio. cycles without maintenance
• Robust Design for a long product life
• Reliable even in demanding environments (e.g. oily work place)
• High endurance
Availability Champion
7
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Availability Champion• Higher safety standards
due to more control• In Software BS350 included statistical
tools allow for a more precise tighteningcase analysis
• Elektronic switch-off with current controlvs. mechanical cut-out with air pressure tools -> lower tolerances of switch-off torque with electronical monitoring
8
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Process Optimizer• One CC-ErgoSpin can replace multiple air pressure
tools – up to 99 tightening programs can be saved on one CC-ErgoSpin tool
• Distinct assignment of tightening programs to work pieces possible (e.g. by barcode)
Before After
9
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Employee Protector
• Grip design according to latest findings in ergonomics research
• Little vibration-> minimized stress on the worker‘s arm
• No risk by air pressure hoses
• Less noise emission than air pressure tools
10
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Environmental Activist• Compared to air pressure tools the CC-ErgoSpin uses
up to 95% less energy and thus contributes to the conservation of resources
• Simultaneously it can save up to >95% of CO2 release – this decreases global warming
• Due to its high durability and its precision the CC-ErgoSpin also protects the environment indirectly: by the reduction of waste
11
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Cost Reducer• The CC-ErgoSpin lowers the costs in the plant
-> lower total costs of ownership (TCO)
0
100
200
300
400
500
600
700
800
900
Air pressure Electronic
Co
st i
n E
uro
per
yea
r
Per
nu
tru
nn
er
Maintenance / Repair
Replacement batteries
Oil
Energy
Total cost of ownership (TCO) – 7 year life cycle(Experience supported calculation based on real plant data)
50% less total costs of electronic tools compared to air pressure tools
12
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Team player• CC-ErgoSpin Kanäle sind
anpassungsfähig:
In Umgebungen mit bereits bestehenden RexrothSchraubsystemen lassen siesich mühelos integrieren
Sie lassen sich problemlos umweitere Rexroth Schraubkanäleerweitern (CC-ErgoSpin, Spindeln und ErgoSpin)
– Dafür sorgt das einheitliche Bediensystem BS350.
13
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Technical Data CC-ErgoSpinTorque range[Nm]
Max. Output Drive Speed
Tool mount
Weight [kg]
Length [mm]
CC-ESA030 6-30 800 3/8“ square 1.6 416
CC-ESA040 8-40 1000 3/8“ square 1.7 434
CC-ESM012QD 2.4-12 1090¼“ quick change chuck
1 201
CC-ESV012 2.4-12 1090 - 1.1 333
14
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Technical Data CC-CS351
CC-CS351
Width [mm] 210
Height [mm] 357,6
Length [mm] 245,5
Weight [kg] 9.7
Until transfer into standard software (estimated for October 2013) the CC system still runs on special software (BS350 V2.218)
15
INDUSTRIAL AUTOMATION FROM ONE PROVIDER
Interfaces CC-CS351Name FunctionXDN1 Motor-Stop Interface
X3U1, X3U2 USB-Host Interface of the CS351 controller
Slot A inoperable
Slot B1, B2 Slot for use of standard modules type B
X3C1 RS232 Interface
X7E1 Ethernet Interface
X6C1 Mass storage slot
XDVI DVI Interface for connection of an external monitor
X3U4 USB-Host Interface
If a fieldbus interface is required, the CC-ErgoSpin handeheld nutrunner can also be operated with a „regular“ CS351, which provides this inteerface.
16
TOGETHER WE ARE MORE POWERFULL
Thank you for your attention!