Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening
description
Transcript of Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening
![Page 1: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/1.jpg)
Indtrængning af PCB i bygningsdelePrimær, sekundær og tertiær forureningMøde i PCB netværket d. 16. april 2013
Lars GunnarsenStatens Byggeforskningsinstitut, Aalborg Universitet
![Page 2: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/2.jpg)
Polychloreret biphenyl
![Page 3: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/3.jpg)
![Page 4: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/4.jpg)
Damptrykkets temperaturafhængighed
![Page 5: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/5.jpg)
Sum 7 congenerer: 28, 52, 101, 118, 138, 153 og 180
De 12 dioxinlignende congenerer: 77, 81, 105, 114, 118, 123, 126, 156, 157, 167, 169, og 189
Alle PCB congenerer akkumuleres i kroppen
105 og 118 har WHO TEF på 0,0001 og for 156 er den 5 gange størreHøjest TEF har nr. 126 med 0,1
Damptrykket for PCB 118 ved 25 oC er 0,00119 Pa. I luft ved 1 atm svarer det til 263 µg/m3
Arbejdstilsynets grænseværdi 10 µg/m3
Sundhedsstyrelsen vejledende aktionsgrænser 3 og 0,3 µg/m3
Grundlæggende om PCB’er
![Page 6: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/6.jpg)
PCB 126, den dioxinlignende kongener med højest TEF
![Page 7: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/7.jpg)
The purpose of this paper is to present an approach to calculate the magnitude of secondary and tertiary sources in PCB contaminated buildings
![Page 8: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/8.jpg)
![Page 9: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/9.jpg)
![Page 10: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/10.jpg)
![Page 11: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/11.jpg)
Paint and lacquer samples were taken using a knife to scrape small parts off the wall and floor.
The concrete samples were taken by sawing a small concrete block from a wall including the line of sealant, breaking the block perpendicular to the sealant and hammering out concrete samples from the fracture surface using a chisel in order to avoid heating the concrete when sampling.
At the chemical laboratory the samples were homogenized and Soxhlet extracted using toluene and purified on columns of silica gel and finally the purified extracts were analyzed by GC-HRMS.
Methods
![Page 12: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/12.jpg)
Data fra Claus Lundsgaard, SBMI, 2012.
Concrete samples
![Page 13: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/13.jpg)
Data fra Helle Vibeke Andersen et al: Kortlægning af eksisterende viden om indtrængning af PCB fra fuger til beton, Miljøstyrelsen 2013.
![Page 14: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/14.jpg)
nxekxC )(
xdxxClMx
x
21)(2
1
dxexklMx
x
xn 2
121
2
1
2
121
x
x
xnenn
xklM
![Page 15: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/15.jpg)
Distance from sealant [mm] 0 - 10 10 - 20 20 - 30 30 - 45 45 - 62 62 - ∞
Mass per length [mg/m] 447 278 79 21 2.0 0.1
Fraction [%] 54 33 10 2.6 0.2 0.02
Accumulated [%] 54 88 97 99.7 99.9 100
PCBtot (secondary source) in concrete
![Page 16: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/16.jpg)
Amount Thickness(mm)
PCBtot(g)
Floor lacquer 7 m2 0.2 0.36Floor wood 7 m2 20 0.39Wall and ceiling paint 31 m2 0.6 4.40Wall and ceiling concrete 31 m2 10 6.92Sealant 0.2 m2 10 508.08Concrete on both sides of sealant 40 m 62 33.20
PCBtot (tertiary source) in surface materials
![Page 17: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/17.jpg)
After approximately 40 years the primary sources contain 92 % of the remaining PCB.
6 % of the remaining PCB has diffused into concrete along the sealants making adjoining concrete an important secondary source.
The last 2 % of the remaining PCB may be found as tertiary pollution of the large surfaces of walls and floor.
In the 17.4 m3 model room with an air change rate of 0.5 h-1 and the recommended highest concentration of 300 ng/m3 in the room air, the annual PCB removal capacity of ventilation becomes as low as 0.023 g/year or equal to 1 g after 44 years.
PCB whereabouts
![Page 18: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/18.jpg)
Remove all primary sources when renovating rooms with PCB containing sealants.
Prioritize also to alleviate emissions from concrete and other materials that have been in direct contact with primary sources.
The expected few grams deposited in the large area of wall paint and top layer of concrete is an important emission source.
Conclusions
![Page 19: Indtrængning af PCB i bygningsdele Primær, sekundær og tertiær forurening](https://reader036.fdocuments.net/reader036/viewer/2022062310/56816071550346895dcf9975/html5/thumbnails/19.jpg)