INDORAMA INTERNAL ELEC BOQ JANUS 28 Aug 2009

SUMMARY COST - INDORAMA INTERNAL ELECTRICAL WORKS

SUB HEAD AMOUNT

I. POINT WIRING - 1,281,250.00

II. 57,850.00

III. MAIN PANEL/PDU's DB & CABLES - 1,436,285.00

IV. EARTHING 370,700.00

V FIXING OF LIGHTING FIXTURES - 45,000.00

VI SUPPLY OF LIGHTING FIXTURES - 700,400.00

VII 20,000.00

VIII PA SYSTEM 89,150.00

IX INVERTER -

X CONSTRUCTION POWER AND LIGHTING 20,000.00

TOTAL COST ( INR ) 4,020,635.00

Discount @ 17% 3,497,952.45

INCLUSIVE OF SERVICE TAX + EDU CESS

CONDUIT & WIRING FOR TELEPHONE NETWORK / COMPUTER NETWORK/AUDIO VIDEO.

CONDUITING FOR FIRE ALARM ,ACCESS CONTROL, BMS, CCTV, & SECURITY SYSTEM

MPHASIS PH-4 INDOREFIRST FLOORINTERNAL ELECTRICAL BOQ

21 AUG 2008

I POINT WIRINGThe rates of Point Wiring for all items shall include the following:

1 The Point Wiring shall include the wiring of light/outlets of any length from the distribution board

via switch to the point.

2 All the Light Fixtures, 3rd pin of the 6 Amp outlets, switch and outlet boxes, shall be earthed with

1.0 sqmm PVC insulated copper conductor wire ( Green )

3 All 16 Amp outlets shall be earthed with 2.5 sqmm PVC insulated copper conductor wire. ( Green )

4 Embedding of conduits and fittings in walls/ floors etc during construction and/or in chases

including making good as necessary.

5 All accessories necessary to complete the wiring as specified.

6 Wherever flexible conduit is required, GI flexible conduit of suitable size with checknut/coupler

shall be used.

Description Unit Qty Unit. Rate Amount Image

I Point Wiring1

a Nos 75 1,000.00 75,000.00

b Nos 800.00 -

2 Nos 250 400.00 100,000.00

3 Nos 120 650.00 78,000.00

S. No.

Wiring for the following light points with 2 x 2.5 sq. mm + 1 x 1.5sqmm (green ) PVC insulated copper conductor FR wires of 650/1100 Volts grade in concealed / exposed PVC conduits/ PVC Trunking as called for including providing 6 amp flush type switches (as, approved),including providing and fixing of White Polycarbonate modular cover plate for switch boxes.

One point controlled by one 6 amp switch. ( DB to First Light Point )Light Points Directly controlled from MCB ( MCB costed seperately )to First Light Point.

Wiring to looped light points with 2x1.5 sq. mm. FR/PVC insulated copper conductor 1100 V grade wires in concealed or surface mounted 20/25 mm dia PVC conduit / existing MS Trunking as required. Including earthing of fixtures and outlet box with 1.5 sq. mm. FR PVC insulated copper conductor 1100 V grade green earth wire. (Including providing GI flexible conduit from 'Tee' to fixture).

Supplying and fixing of 2 nos. 6 amp outlet international / universal type pin including providing 1 no. 6 amp indicator switch ( Red ) housed in 16 gauge MS box with approved White Polycarbonate modular cover for outlet boxes.( For UPS, wiring & conduiting are separate items ).


21 AUG 2008

Description Unit Qty Unit. Rate Amount ImageS.

No.

4 Nos 120 310.00 37,200.00

5 Nos 2 500.00 1,000.00

6

a 25 mm dia PVC conduit RM 1000 60.00 60,000.00 32 mm dia PVC conduit RM 150 75.00 11,250.00

7 -

a 3 x 2.5 sq. mm copper flex cable/ wire RM 3000 65.00 195,000.00 8 Nos 30 1,200.00 36,000.00

9 Nos 10 1,200.00 12,000.00

Supplying and fixing of 1 nos. 6 amp 5-pin outlet with ROUND PIN including providing 1 no. 6 amp switch housed in 16 gauge MS box with approved White Polycarbonate modular cover for outlet boxes.( For Raw Power at W/Station , wiring and conduiting are separate items)

Supplying and fixing of 1 nos. 16 amp 5-pin outlet with round pin including providing 1 no. 16 amp switch housed in 16 gauge MS box with approved White Polycarbonate modular cover for outlet boxes.( For UPS, wiring and conduiting are separate items)

Providing and fixing in position of the following sizes of PVC conduit including all accessories as required.

Supplying and drawing of the following size of PVC insulated PVC sheathed copper conductor FR sheathed copper conductor FR wires of 650/1100 V grade in existing conduits/Raceway.( For UPS power+ Raw Power @ workstations )

Wiring for , 6 amp light plug outlet with 1.5 sq. mm PVC insulated copper conductor FR wires in concealed/exposed PVC conduits including providng 6 amp switch, MS box for housing switches sockets, approved White Polycarbonate modular cover to outlet boxes and earthing. ( Raw Power- Housekeeping)

UPS Wiring for , 6 amp light plug outlet with 1.5 sq. mm PVC insulated copper conductor FR wires in concealed/exposed PVC conduits including providng 6 amp switch, MS box for housing switches sockets, approved White Polycarbonate modular cover to outlet boxes and earthing. ( HVAC Fire Dampers )


21 AUG 2008


No.

10 4 3,600.00 14,400.00

11 Nos 2 3,200.00 6,400.00

12 Nos 8 2,500.00 20,000.00

13

a RM 200 165.00 33,000.00

14 Nos 10 6,500.00 65,000.00

15 Nos 2 6,000.00 12,000.00

Wiring for 16 amp power outlet points with 4 sq. mm PVC insulated copper conductor wires for the first socket outlet and 2.5 sq. mm PVC insulated copper conductor FR wires for the second outlet 650/1100 Volts grade in concealed/exposed PVC conduits as called for including providing 16 amp flush type 6 pin socket and switch, MS outlet boxes for power outlets. Approved White Polycarbonate modular cover to outlet boxes and earthing. (Only two outlets shall be connected to each circuit)

Set (Two outlets )

Wiring for 16 amp power outlet points with 4 sq. mm PVC insulated copper conductor wire of 650/1100 Volts grade in concealed/exposed PVC conduits including providing 16 amp flush type combined 6 pin sockets and switch, approved White Polycarbonate modular cover to MS outlet boxes and earthing. (Only one outlet shall be connected to each circuit).

Supplying and fixing of 32 amp 3-pin (phase, neutral and earth),1-phase industrial socket for AC POWER, including supplying plug top complete with MCB as required and as per specifications. Industrial Plug Socket MDS Cat No.607851 or equivalent ( Wiring is taken seperately)

Supplying and drawing of the following size of PVC insulated copper conductor FR wires of 650/1100 V grade in existing conduits, complete as required and as per specifications.

3 x 6 sq. mm copper flexible cable. ( FOR SINGLE PHASE A/C)

Supplying and fixing of 32 amp 3-PIN ROUND ( 1 phase + 1 Neutral +earth) for 1-phase IP 66 rated Surface SOcket Outlet complete with Mounting Enclosure and 3 Pin Angle Plug ( IP 56 ), complete as required and as per specifications.FOR RACK POWER IN SERVER ROOM. CLIPSAL/Bals make or Equal

Supplying and fixing of EGA BOX outlet including supplying 18 gauge MS PAINTED outlet boxes of suitable size, and with 6/16 amp Socket and switch, complete as required and as per specifications.


21 AUG 2008


No.

16

a 25 mm dia PVC conduit RM 250 60.00 15,000.00

b 32 mm dia PVC conduit RM 50 75.00 3,750.00

17

a 450mm x 40mm (3mm thick cover) RM 0 - b 400mm x 40mm (3mm thick cover) RM 0 - c 350mm x 40mm (3mm thick cover) RM 0 - d 300mm x 40mm (3mm thick cover) RM 0 - e 250mm x 40mm (3mm thick cover) RM 0 - f 200mm x 40mm (3mm thick cover) RM 75 1,900.00 142,500.00 g 150mm x 40mm (2mm thick cover) RM 50 1,650.00 82,500.00 h 100mm x 40mm (2mm thick cover) RM 75 1,250.00 93,750.00 i 65mm x 40mm (2mm thick cover) RM 75 1,000.00 75,000.00

18

a 450mm x 40mm (3mm thick cover) Nos - b 400mm x 40mm (3mm thick cover) Nos - c 350mm x 40mm (3mm thick cover) Nos - d 300mm x 40mm (3mm thick cover) Nos 0 - e 250mm x 40mm (3mm thick cover) Nos 0 - f 200mm x 50mm (3mm thick cover) Nos 4 1,200.00 4,800.00 g 150mm x 50mm (3mm thick cover) Nos 8 1,050.00 8,400.00 h 100mm x 50mm (3 mm thick cover) Nos 8 975.00 7,800.00 i 65mm x 50mm (3mm thick cover) Nos 10 900.00 9,000.00

19

a 200mm x 50mm (2mm thick cover) RM 0 -

b 150mm x 50mm (2mm thick cover) RM 0 -

Supplying and fxng in position of the following sizes of exposed/concealed PVC conduit including all accessories complete as required and as per specifications.

Providing and fixing on floor of following sizes of Raceway made on 16 gauge sheet steel Stove Enamelled Blue with all accessories as required complete as required (DATA RACEWAY)

Providing and fixing on floor of following sizes of JUNCTION BOXES for above Raceway made of 16 gauge sheet steel Stove Enamalled Blue with all accessories as required complete as required (DATA RACEWAY)

Providing and fixing on floor of following sizes of Raceway made on 16 gauge sheet steel Stove enammeled ORANGE with all accessories as required including supply & fixing of approved MS Painted junction box complete as required, complete as required(POWER RACEWAY)


21 AUG 2008


No.

c 100mm x 50mm (2mm thick cover) RM 0 -

d 65mm x 50mm (2mm thick cover) RM 75 1,100.00 82,500.00

20 Nos 0 -

Total Carried over to Summary I 1,281,250.00

Supplying ,testing & installing 10 inch Exhaust fans , Newtek make


21 AUG 2008


No.

II CONDUIT AND WIRING FOR VOICE/DATA NETWORK /AUDIO VIDEO.

1 Nos 120 60.00 7,200.00

2

a 25 mm dia PVC conduit RM 350 55.00 19,250.00 b 32 mm dia PVC conduit RM 0 75.00 - c 25 mm dia GI Flexible conduit RM 550 35.00 19,250.00 d 32 mm dia GI Flexible conduit RM 0 45.00 -

6 Nos 4 225.00 900.00

8 RM 250 45.00 11,250.00

10 RM 0 165.00 -

Total carried over to SummaryII 57,850.00

Providing and fixing in position MS anodized computer outlet / telephone box 16 gauge suitable for fixing of jack complete as required.

Providing and fixing in position following sizes of PVC conduits including providing all accessories concealed / exposed as required

Providing and fixing in position MS anodised TV outlet box 16 gauge with white poly carbonate modular cover plate including supplying, fixing of co-axial type T.V. socket outlet complete as required.

Supply & laying of RG-59 (Commscope make) cable for TV in existing conduit complete as required

Supply & fixing of 20 Pair, 0.61mm dia Armoured Telephone Cable.


21 AUG 2008


No.

III MAIN PANELS/PDU's/ DB'S & CABLES & CABLE TRAYS

The rates shall include the following:1 Earthing all components, frames etc2 Effecting adequate and proper connections and terminations, with thimbles etc.3 Painting, lettering, ferruling on DB's and providing its circuit diagram4 Painting all metal parts with approved enamel paints.

1 ELECTRICAL DIST: PANELS

A Main Panel ( As Per SLD ) Set 1 315,000.00 315,000.00

B UPS DIST PANEL ( AS PER SLD ) Set 1 187,500.00 187,500.00

C UPS OUTGOING PANEL ( AS PER SLD) Set 1 135,000.00 135,000.00

D UTILITY PANEL ( AS PER SLD) Set 1 75,000.00 75,000.00

2

a Nos 0 -

Design, manufacture, supply, installation, testing and comissioning of 2 mm thick MS sheet steel fabricated cubicle type Panel dust and vermin proof complete with hinged and lockable doors. All the panels shall be floor mounted and dead front construction complete with interrconnections by copper tapes / wires and painting. The distribution boards shall be provided with one no. of multifunction meter machsmart 96 of Neptune Ducati make or equivalent along with associated C.T.'s & P.T.'s in the incoming switch. The current density of the bus bar to be used in panel shall be 1.3 sq mm/amp. AS PER ENCLOSED SLD

Supplying the following 16 SWG Distribution Boards . Including proper labling as directed alongwith separate Neutral Link for each Phase, Earth link and separate dedicated Earth link in case of UPS Distribution Boards as well as necessary Bus links etc.

Sheet metal enclosed, VTPN DB with 1 No 250 A TP MCCB ( DPX 250 ER Icu=36 kA ) incomer and outgoing 12 Nos. of 63 amp TP MCB ( FOR A/C PANEL) WITH METER BOX INCLUDING VOLTMETER ( ANALOGUE 0-500V, AMMETER 0-300A, WITH NECESSARY CT'S. PLS CHECK SLD )LEGRAND MAKE CAT NO. 6078 22 + 6077 75 OR EQUAL


21 AUG 2008


No.

b Nos 0 -

c Nos 0 -

d Nos 0 -

e Nos 0 7,500.00 -

f Nos 4 4,500.00 18,000.00

g Nos 3 17,500.00 52,500.00

h -

Sheet metal enclosed, VTPN DB with 1 No 125 A MCCB incomer and outgoing 10 A SP MCB's as required, for UPS DB. LEGRAND MAKE Cat No. 6077 91 OR EQUAL

Sheet metal enclosed, VTPN DB with 1 No 150 A MCCB incomer and outgoing 24 Nos. of 16 amp SP MCB FOR RACK POWER DISTRIBUTION SOCKET

Sheet metal enclosed, VTPN DB with 1 No 100 A MCCB incomer and outgoing 12 Nos. of 63 amp TP &N MCB

Supply, installation, testing & commissioning of 100 A FP MCCB, 25KA service breaking capacity and 100 Amp trip setting in sheet steel enclosure along with ON indication lamp complete as required.( INCOMNG TO UPS

Supply, installation, testing & commissioning of Surface Mounted Socket Outlet with 63A FP MCB provision, for 3 Phase, IP 67 rated, Neptune Bals make ( Insulated Plug & Socket ) or Equal, complete with Plug.(FOR 3 Phase AC's)

Sheet metal enclosed, double door,08 way TPN DB with 24 Nos. of 10/20 amp SPMCB i.e. 24 Nos. of 10/20 amp SPMCB arranged in 3 rows & controlled by 1 No. 63 amp 4P MCB & neutral link, and Per Phase Isolation with 20 AMP DP MCB, complete with Busbar, Shrouded Neutral Link + Earth Link ( UPS DB'S)

Sheet metal enclosed, double door,10 way TPN DB with 30 Nos. of 10/20 amp SPMCB i.e. 10 Nos. of 10/20 amp SPMCB arranged in 3 rows & controlled by 1 No. 63 amp 4P MCB & neutral link, and Per Phase Isolation with DP MCB, complete with Busbar, Shrouded Neutral Link + Earth Link


21 AUG 2008


No.

i Nos 3 18,500.00 55,500.00

j Nos 2 14,500.00 29,000.00

k Nos 2 6,500.00 13,000.00

3

a RM 0 - -

b RM -

c RM -

g RM 40 600.00 24,000.00

Sheet metal enclosed, double door,12 way TPN DB with 36 Nos. of 10/20 amp SPMCB i.e. 12 Nos. of 10/20 amp SPMCB arranged in 3 rows & controlled by 1 No. 63 amp 4P MCB & neutral link, and Per Phase Isolation with 32 AMP DP MCB, complete with Busbar, Shrouded Neutral Link + Earth Link ( 4 Row of 13 Modules DB) LEGRAND CAT No. 6077 65 or Equal ( L&P DB'S)

Sheet metal enclosed, double door,6 way TPN DB with 18 Nos. of 10/20 amp SPMCB i.e. 18 Nos. of 10/20 amp SPMCB arranged in 3 rows & controlled by 1 No. 40 amp TPN MCB & neutral link, with 20 DP MCB protection for Each Phase, complete with Neutral + Earth Links. ( FOR SRV UPS DB'S)

Sheet metal enclosed, double door, 4 way SPN DB with 4 Nos of 16 amps,SP MCB and controlled by 1 No. 40 amp DP MCB and neutral link. ( EMG LIGHT DB'S)

Supply, Install Test and Commission the following:

4 nos. 16 sq mm PVC insulated copper conductor wires in 50 mm dia PVC conduit. Including providing 2 no. 6 sq mm PVC insulated green copper earth wire.


4 nos. 6 sq mm PVC insulated copper conductor wires in 32 mm dia PVC conduit. Including providing 2 no. 2.5 sq mm PVC insulated green copper earth wire.



21 AUG 2008


No.

4 -

a 4 x 70 SQ MM Cu Arm Cable RM 0 - b 4 x 50 SQ MM Cu Arm Cable RM 0 - c 4 x 16 SQ MM Cu Arm Cable RM 130 785.00 102,050.00 d 4 x 10 SQ MM Cu Arm Cable RM 50 668.00 33,400.00 e 3X6 SQ.MM Cu.Flexible Cable RM 100 268.00 26,800.00 f 3X4 SQ.MM Cu.Flexible Cable RM. 0 - g 1x25 SQ.MM Cu Flexible Cable RM 200 350.00 70,000.00 h 1x 16 SQ MM Cu Flexible cable RM 50 197.00 9,850.00

5

a 4 x 70 SQ MM Cu Arm Cable Nos 0 - b 4 x 50 SQ MM Cu Arm Cable Nos 0 - c 4 x 16 SQ MM Cu Arm Cable Nos 8 350.00 2,800.00 d 4 x 10 SQ MM Cu Arm Cable Nos 0 - e 3X6 SQ.MM Cu.Flexible Wire Nos 0 - f 3X4 SQ.MM Cu.Flexible Wire Nos 0 - g 1x25 SQ.MM Cu Flexible Cable Nos 20 100.00 2,000.00 h 1x 16 SQ MM Cu Flexible cable Nos 8 100.00 800.00

6

a 3½ x 240 SQ MM RM 100 1,150.00 115,000.00 b 3½ x 185 SQ MM RM 0 - c 3½ x 150 SQ MM RM 0 - d 3½ x 120 SQ MM RM 0 - e 4 x 95 SQ MM RM 30 712.00 21,360.00 f 4 x 70 SQ MM RM 0 - g 4 x 50 SQ MM RM 0 - h 4 x 35 SQ MM RM 0 - i 4 x 25 SQ MM RM 150 287.00 43,050.00 j 4 x 16 SQ MM RM 75 215.00 16,125.00 k 4 x10 SQ MM RM 0 165.00 -

Supplying, Receiving, unloading, storing layiing, effecting proper connections, testing and commissioning of following sizes of 1.1 KV grade XLPE insulated Copper conductor Armoured / Unarmoured/Flexible cables laid on existing overhead cable trays or over MS supports in masonry trenches including providing the MS supports and clamps for fixig to supports in an approved manner complete as required and as per specifications.

Cable termination of the following XLPE insulated Copper conductor armoured cables of 1100V grade including cost of thimbles / lugs, single compression nickel plated brass glands, cables sockets, insulation tape and crimping etc. complete as required.

Supplying, Receiving unloading, storing laying, effecting proper connections, testing and commissioning of following sizes of 1.1 KV XLPE insulated Aluminium Armoured cables in existing overhead cable trays or over MS Supports in masonry trenches including providing the MS supports and clamps for fixing to supports in an approved manner complete as required and as per specifications.


21 AUG 2008


No.

l 3 x 10 SQ MM RM 0 - m 3 X 4 SQ MM RM 0 -

7

a 3½ x 240 SQ MM Set 2 800.00 1,600.00 b 3½ x 185 SQ MM Set 0 - c 3½ x 150 SQ MM Set 0 - d 3½ x 120 SQ MM Set 0 - e 4 x 95 SQ MM Set 2 550.00 1,100.00 f 4 x 70 SQ MM Set 0 - g 4 x 50 SQ MM Set 2 - h 4 x 35 SQ MM Set 0 - i 4 x 25 SQ MM Set 6 300.00 1,800.00 j 4 x 16 SQ MM Set 0 250.00 - k 4 x10 SQ MM Set 2 150.00 300.00 l 3 x 10 SQ MM Set 0 0

m 3 X 4 SQ MM Set 0 0

8

a RM 100 350.00 35,000.00

b RM 75 650.00 48,750.00

c RM 50 700.00 35,000.00

Total carried over to Summary III 1,436,285.00

Cable termination of the following XLPE insulated aluminum conductor armoured cables of 1100V grade including cost of thimbles / lugs, single compression nickel plated brass glands, cables sockets, insulation tape and crimping etc. complete as required.

PERFORATED/LADDER Type Cable Tray (For Power Cables)

Providing and fixing the following Perforated/Ladder type MS Painted Cable Tray alongwith necessary hanging material ,coupler plates, nuts, bolts and washers with the following specifications. (All accessories like tees, bends vertical / horizontal shall be factory prefabricated and cost of these to be included in the rate. Site fabricated accessories are not acceptable).

150 mm wide, 50 mm high, 1.6 mm thick cable tray.( LADDER TYPE )

300 mm wide, 50 mm high, 1.6 mm thick cable tray.( LADDER TYPE )300 mm wide, 50 mm high, 1.6 mm thick cable tray.( Perforated TYPE )


21 AUG 2008


No.

IV EARTHING & GROUNDING

1

a 50 x 6 MM GI TAPE RM 0 - - b 40 x 6 MM GI TAPE RM 0 - - c 25 x 6 MM GI TAPE RM 0 - - d 8 SWG bare GI wire. RM 0 30 - e RM - -

f RM -

g RM 150 450.00 67,500.00

2 Each 0 - -

3 Each 6 13,500.00 81,000.00

4

c. RM 0 - -

e. RM 0 - -

5

a. 100 MM DIA (B Class) RM 30 500.00 15,000.00 6 Each 4 1,500.00 6,000.00

7

a 35 SQ MM RM 0 - b 25 SQ MM RM 300 282.00 84,600.00 c 16 SQ MM RM 300 177.00 53,100.00 d 10 SQ MM RM 0 - e 6 SQ MM RM 400 60.00 24,000.00

8

a 20 mm dia 16 SWG RM 0

Supplying and fixing of the following tapes / wires including excavation and filling complete with all necessary fixing accessories and effecting connections.

50 x 6 MM COPPER TAPE

25 x 3 MM COPPER TAPE 25 x 3 MM COPPER TAPE in PVC SLEEVE Providing earthing stations (B Class GI pipe earthing) complete as per I.S. specifications (GI pipe shall be 50 MM dia) (GI pipe 16 feet and depth of pit 17 feet). (With Heavy Duty Manhole)

Providing earthing stations (16 SWG Copper pipe/plate earthing) complete as per I.S. specifications IS 3043 (Copper pipe shall be 40 MM dia, 10 Ft Long) (Copper plate 600x600x3mm). (With Heavy Duty Manhole)

Providing and laying the following UPVC pipe including digging and back filling of trench up to a maximum depth of 600 mm.

110 MM DIA (6 KG PER SQ CM - CLASS 3)50 MM DIA (6 KG PER SQ CM - CLASS 3)Providing and laying the following GI pipe including digging and back filling of trench up to a maximum depth of 750 mm.

Providing manholes 600 x 600 x 600 MM deep along with CI ( Heavy ) manholes covers.

Providing and drawing the following PVC Insulated Copper Conductor 1100 Volt grade flexible Cable ( GREEN COLOR ) including cost of thimbles / lugs insulation tape and crimping etc. complete as required including terminations.

Providing and fixing the following MS conduit recessed /surface mounted as directed.(earth pit to facility)


21 AUG 2008


No. b 25 mm dia 16 SWG RM 150 120.00 18,000.00 c 32 mm dia 14 SWG RM 50 160.00 8,000.00

9 Set 3 4,500.00 13,500.00

Total carried over to Summary IV 370,700.00

Providing and fixing 16 SWG MS enclosure600x200x75mm deep along with MS Cover. Including providing 2 no. insulated supports, 2(50x6) mm thick copper strip (Nickel plated) with suitable holes to fix dedicated earth wires complete with lugs. "Dedicated Earth" to be inscribed on the cover of the enclosure.


21 AUG 2008


No.

V FIXING OF LIGHTING FIXTURES

The rates for Fixing of Light fixtures and fans shall include all fixing accessoriesthat may be required to make the installation complete in all respects such as :

1 Providing connecting wires and channel support wherever required2 Internal wiring between accessories3 Self interlocking connector block for connecting fixture to point.4 Earthing of Fixtures with 1.0 sqmm PVC insulated copper conductor wire.5 Approved down rods/ GI chain/ clamps and other components and accessories.

1 Nos 300 150.00 45,000.00

2 Nos 0 150.00 -

3 Nos 0 100.00 -

4 Nos 0 -

5 Nos 0 75.00 -

6 Nos 0 -

Rs 45,000.00

Receiving, fixing in position, effecting proper connections, testing and commissioning of 1 x 36 watt fluorescent fixtures/2 x 36 watt fluorescent fixtures fixed surface mounted on ceiling or wall mounted with all fixing accessories as required.

Receiving, fixing in position, effecting proper connections, testing and commissioning of 1 x 36 / 4 x 18 watt fluorescent fixtures/2 x 26 watt fluorescent fixtures fixed recessed in ceiling with chains hung from slab with all fixing accessories as required, along with providing PVC flexible conduit from junction box at slab level to fixture.

Receiving, fixing in position, effecting proper connections, testing and commissioning of PL 13/ 18 W, MR 16 / 12V , AR-111, lamp fixture recessed in ceiling including providing and fixing of required G.l. sheet n which fixture shall be clamped complete as required and with all accessories, along with providing PVC flexible conduit from junction box at slab level to fixture.

Receiving, fixing in position effecting proper connections testing and commissioning of PL/ Pendant lamp fixed surface mounted on ceiling or wall mounted complete as required with all accessories.

Receiving, fixing in position effecting proper connections testing and commissioning of 1 x 18/ 1 x 36 W Flourscent Patti fittings in Cove/Pelmets as required with all accessories.

Receiving, fixing in position effecting proper connections testing and commissioning of PL/ Wall light/ Uplighters/ fixed surface mounted on ceiling or wall mounted complete as required with all accessories.

Total carried over to Summary V


21 AUG 2008


No.

VI SUPPLY OF LIGHTING FIXTURES

1

A Nos 50 3,200.00 160,000.00

-

B Nos 80 1,500.00 120,000.00

C 0 -

D 0 -

E 0 1,300.00 -

F Nos 150 750.00 112,500.00

G Nos 0 -

2

A Artlite Cat No. RL-3165 with 1 x 18W PL lamp Nos -

B Nos 30 850.00 25,500.00

C 6 3,500.00 21,000.00

D 1 xQR-111 Fixt:Thorn Cat No:QMLD 1050 Nos - E 2 xQR-111 Fixt:Thorn Cat No:QMLD 2050 Nos 8 4,300.00 34,400.00

3 Wall Lights Artlite ( Basic cost Rs 800/= ) Nos - 4 Nos -

Supply of the following fluorescent/Incandescent/MR-16, MR-11, etc light fixtures with all accessories, such as spring loaded side holders, copper/electronic ballasts, starters, power factor compensators, MS housing to house electronic ballasts, complete with tubes.

2x36W CFL recess mounted Direct-Indirect luminaire with 2nos. of 36W CFL - Wipro/Thorn/Philips

2x18W recess mounted down light with high efficiency satin finished anodised aluminium reflector with frosted diffuser and 2nos. 18W CFL lamp - Wipro WCP 27218 SGW

Wipro/Philips/Thorn Make 2 x 36 W CFL , T8 Industrial Chanel with Stove Enamaled reflector, Complete with lamps Cat No. Wipro WCF 26236 (INDUSTRIAL SUSPENDED)

FLOOD LIGHT FIXTURE WITH 150W LAMP DOUBLE ENDED (CAT.NO.-MFH 51150) (SYSMMETRIC) WIPRO/PHILIPS/THORN, complete with control gear and bracket.

WIPRO/THORN/PHILIPS MAKE 1X18W WALL Light in reinforced Thermoplastic with Polycarbonate diffuser (CAT.NO.-FWP 42118).

Philips make 1 x 28 W T 5 Batten Fitting ( TCH 128/2005/840 Philips/Wipro/Thorn make 1 x 28 W Batten Fitting (Blue colour tube light in cove server rm & telcon)

Supply of following PL lamp / MR-16/AR-111 fixtures complete with all accessories and PL lamp / halogen lamps with transformer, complete as required.

WIPRO/THORN/ARTLITE TYPE DLSD 50R 95G. 12V/ 50W lampPendant Light Fixture with decorative glass (basic cost Rs 1500/= )

Nos

Table Lamps, of approved design, (basic cost Rs 1750/=)


21 AUG 2008


No.

5 Nos -

6 Nos 0 1,250.00 -

7 Nos 8 6,500.00 52,000.00

8 Lot 1 175,000.00 175,000.00

VI Total carried over to Summary VI Rs. 700,400.00

Wall Mount Up Lighters, Reiz/Artlite make. ( Basic cost Rs 1200/=)Uplighters in Toilets Artlite make ( Basic Price Rs 850/= )EMERGENCY LIGHT (EXIT SIGN ) Thorn/Pierlite FVSP 108 N (Non Maintain)

Decorative light fixture s as per Architect's approval. Basic cost, including lamp and all taxes Rs 150000/


21 AUG 2008


No.

VII CONDUITING FOR FIRE ALARM ,ACCESS CONTROL, BMS, CCTV, & SECURITY SYSTEM

3

a 20 mm dia 16 SWG RM 200 70.00 14,000.00 b 25 mm dia 16 SWG RM 50 120.00 6,000.00 c 32 mm dia 14 SWG RM 0 - 4 RM 0 -

5 RM 0 -

6 RM 0 -

7

a 20 mm dia 16 SWG RM 0 - b 25 mm dia 16 SWG RM 0 - c 32 mm dia 14 SWG RM 0 - 8 Nos

a RM 0 -

9 RM 0 -

10 RM 0 -

Rs 20,000.00

Providing and fixing the following MS conduit surface mounted as directed.(fire alarm)

Providing and laying 2 core 1.5 sq mm, PVC insulated and PVC sheathed cable in existing MS conduit for Fire Alarm System.

Providing and laying RG - 6 cable in existing PVC conduit for CCTV System.

Providing and laying PVC insulated, shielded 12 core 24 AWG stranded copper conductor control cabling for CCTV System in existing PVC conduit.

Providing and fixing the following MS conduit surface mounted as directed.

Providing and fixing 16 SWG single compartment MS trunking with 16 SWG openable covers at regular intervals along with necessary cable support system as directed including providing and fixing accessories like suitable Clamps, Dash Fasteners, Cable Ties, Gaskets etc. complete in all respects. (All Trunking is to be cleaned thoroughly, before pulling any wires / cables). Including earthing of the trunking with 4 sq. mm. PVC insulated Yellow + Green Copper Earth Wire with proper thimbles. All joints of MS Trunking shall be provided with proper couplers as directed. Including providing 300x300x50 mm deep Junction Boxes as required. (Please note Junction Boxes shall be part of the trunking item and shall not be paid extra).

40 x 150 x 40 mm deep (painted Grey in colour)

Providing and laying PVC insulated, shielded and sheathed 8 core 24 AWG stranded copper conductor control cabling for BMS System in existing Raceway or conduit.

Providing and laying PVC insulated, sheathed 4 core 24 AWG stranded copper conductor control cabling for BMS in existing MS conduit.

Total carried over to Summary VII


21 AUG 2008


No.

VIII CONDUTING, WIRING & SUPPLY, INSTALL OF PA SYSTEM1 Nos 40 950.00 38,000.00

2 Nos 1 18,500.00 18,500.00

3 No 1 8,900.00 8,900.00

4 Nos 0 -

5 Nos 0 -

6 RM 450 35.00 15,750.00

7

a. 20 mm dia 16 SWG RM 200 40.00 8,000.00 b. 25 mm dia 16 SWG RM 0 -

VIII 89,150.00

Providing and fixing BOSCH make Speakers. Speakers shall be LBD (6 Watts Read Power) including linematching transformer (Ceiling Recessed with mounting clamp - White colour)

Providing and fixing BOSCH make Amplifier shall be LBD 8148 + LBD 8733 Four channel Audio mixer with Goose call station (LBB 1950)

Providing and fixing Volume Control with operating knob in GI outlet Box complete with cover plate and blank plate. (Sample to be approved by Architect)

Providing and fixing Mass Volume Control with operating knob in GI outlet Box complete with cover plate and blank plate. (Sample to be approved by Architect)

Wiring to speakers in existing conduit. 24 / 0.20 mm PVC insulated twin twisted flexible annealed tinned copper wire.

Providing and fixing the following PVC conduit surface mounted as directed.

Total carried over to Summary Rs.


21 AUG 2008


No.

IX SUPPLY & INSTALLATION OF INVERTER

1 Set 0 -

- Quick change-over from Mains to Inverter Mode

- Constant Voltage Throughout-

-

-

- LCD display for all protections and helping steps

- Auto self test for Inverter on LCD Display- LCD Display for battery level and load level-

- Enhances battery life- Generator Compatibility

IX Rs -

X LS 1 20,000.00 20,000.00

Supplying, installation, testing and commissioning of 10 KVA invertor DSP pure Sinewave output single phase input and single phase output including batteries suitable for 15 minutes back up, trolley on wheels to house the batteries. The inverter should have the following features :

DSP (Digital Signal Processing) based Pure Sine Wave Output)High and Low Input voltage Protection for connected appliancesSoftware controlled auto reset feature for overload, short circuit and low battery

Appliances which run on Sine-I do not produce any humming / disturbing noise

Total carried over to Summary Rs.

Providing Construction Lighting ( Power will be supplied at a Single Point by the Owner), with sufficient Nos of Lamps and Patti Fittings and Multi Socket Points, necessary DB, etc as required.


21 AUG 2008


No.

-

INDORAMA INTERNAL ELEC BOQ JANUS 28 Aug 2009

Documents

Transcript of INDORAMA INTERNAL ELEC BOQ JANUS 28 Aug 2009