INDEX [talakeel.com]talakeel.com/pdf/Company_Profile.pdf · · 2015-07-09INDEX 1. Chairman’s...
Transcript of INDEX [talakeel.com]talakeel.com/pdf/Company_Profile.pdf · · 2015-07-09INDEX 1. Chairman’s...
INDEX
1. Chairman’s Message.2. Introduction.3. Company Registration Documents.4. Product Sales Division.
a. Messer Eutectic Castolin, Switzerlandb. Dillinger Middle East, D u b a ic. Metrode Products Ltd, UKd. Rywal- RHC
5. Contracting Divisiona. Project Manager’s Profileb. Work Portfolioc. Clienteled. Major Projects Executed
6. Central Warehouse7. Workshop8. Field Services9. Key Contacts10. CDP Manufacturing, Dubai
CHAIRMAN’S MESSAGE
We adhere strictly to human values andprofessional principles. We are enhancing our area ofoperations to ensure a consistent and positiveexperience for our customers, principals, suppliers andemployees. As a business group we remain committedto corporate and social responsibility and we strive toensure that all economic, environmental and socialfactors are taken care of. This approach of respect,rigour and involvement makes us more responsibleand acceptable. Our vision is to be the bestorganization in our chosen field of operation.
Dr. Tarek Nasser Al AkeelChairman / C.E.O
Tarek Nasser Al-Akeel Co. Ltd is a leading Saudi ownedcompany operating in Kingdom of Saudi Arabia, the largest oilproducing country in the world and also the largest Arab countryin the Middle East.
We are in operation since 1982 with a vision to provide technicalinnovation and engineering skills to contribute to the growth ofthe nation.
The company has very good reputation in its chosen field, builton a philosophy of providing performance with quality andservice from the initial enquiry to execution of the assignment.
We are flexible in terms of understanding and responding to theclient needs, our entire work portfolio is quite unique which givesus a competitive edge; we give careful attention to the client needsand strive hard with continuous improvements in ourperformance in terms of quality and competitiveness.
Our growth has been achieved through long lasting businessrelations with our esteemed clients, support from Principals andcommitment of “employees and management”. We plan ourfuture growth through deeper understanding of clients and focuson a fruitful relation through innovative, quality services anddelivering promised services.
We are equipped with adequate resources and knowhow for thetimely delivery of our products as well projects completion to theentire satisfaction of our clients.
PROJECT MANAGEMENT
Our basic principle is to provide utmost customer satisfactionthrough delivery of prompt services expected by the clients.From the point of contract award, we ensure the involvementof the company’s well-experienced staff to provide aprofessional service to the client’s satisfaction. We focus onProcess Industries, fully understanding the importance ofschedule, quality and reliability of the services rendered.
We strive to provide the most reasonable standards ofengineering and workmanship, which are achieved by constantmonitoring of every stage of work and by utilizing the latestavailable technology and tools
We have a balanced team with experience and energy,experienced in large Industrial Projects such as Cement Plantsand Steel Plants as well as infrastructure projects such as DubaiMotor City and Dubai Maritime City.
LABOUR POLICY
Understanding the fact that the Human Resources is the heartof the service industry, we employ a mixture of Qualified,trained, experienced and enthusiastic work force and have anexcellent record in labour Relations. We possess a positiveattitude in ensuring quality and safety while being strict onimplementation of the procedures.
HEALTH AND SAFETY
Throughout the execution of a project, we maintain a strongcommitment to safety at site, aiming at zero accidents, well-being of the workers and totally discouraging unsafe orunhealthy work practices.
2.
3.
Plasma cutter FanCut 41 Plasma torch for FANCUT 41 MOST
WELDING GENERATOR MOST 220S MOST 300SE
FANMIG 404GP SYNERGY FANMIG 1701
4. RYWAL-RHC
PONTE 3.2 MOST PONTIG 1880 HF
Dryer PD 0-20 MOST MIG TORCH
MMA ELECTRODES MIG/TIGWIRE
RME Middle East –FZCO distribute the professionalbeveling, drilling, welding and cutting products ofPromotech Company. Promotech is the mainmanufacturer of professional power tool and industrialequipment.
Each product from Most, Gold, Eckert, Promotechfamily has been chosen after detail selection process,starting from market research design, distribution,pricing and finally marketing. It is the respond tocustomers who look for complex offer, good qualityand reasonable prices that is why we find it was aperfect tool and guide through the whole welding andcutting assortment.
GRINDING WHEEL CUTTING WHEEL
(B) WORK PORTFOLIOTarek Nasser Al-Akeel Co.to remain flexible on the type ofwork that the company undertakes and is prepared toenter new markets and work with clients on new concepts.Our recent portfolio falls into the following areas: Steel Constructions:- Fabrication and erection ofstructures, Pipes, Process ducts etc. Total solutions to Process Industry. We undertake de-bottlenecking, avoidance of repeated failures,enhancement of life/ reliability, productivityimprovement etc. Erection of rotary and static equipment.Maintenance Support Jobs in Process industry. Execution of projects, minor/ major. Execution of major Repairs to Rotary Kilns, mills, Pre-heaters, grate coolers etc. Replacement/ modification of Ball Mill internals. Repair and reconditioning of components. Emergency repairs to heavy components such as KilnTyre, Supporting roller, Roller press rolls, VRM Rollersetc. Thermal spray coating for corrosion protection, wearprotection etc.
(C) CLIENTELE.
S. No. Name of the Company Country
01. Saudi Arabian Oil Company (Saudi Aramco) K.S.A
02. Saudi Basic Industries Corporation (Sabic) K.S.A
03. Saudi Electricity Company K.S.A
04. Saline Water Conversion Corporation(SWCC)
K.S.A
05. Arabian Cement Company K.S.A
06. Yanbu Cement Company K.S.A
07. Southern Province Cement Company K.S.A
08. Tabuk Cement Company K.S.A
09. Qassim Cement Company K.S.A
10. Saudi Cement Company K.S.A
11. Eastern Province Cement Company K.S.A
12. City Cement Company K.S.A
13. Yamama Saudi Cement Company K.S.A
14. Riyadh Cement Company K.S.A
15. MMG K.S.A
16. M. S. Al-Suwaidi K.S.A
17. Nasser Al Hajri Corporation K.S.A
18. Al Rushaid K.S.A
19. CCC (All Projects) K.S.A
20. Al Zamil Steel Heavy Industries K.S.A
(D) MAJOR PROJECTS EXECUTED
S. No. Job Description Client
1 Replacement of Front Mill table, repairs
to the foundation by chipping of and re-
grouting with EPOXY.
HADEED
2Replacement of Down Coiler 1 and 2
Aprons and repairs to the down coiler.HADEED
3
Replacement of buckets and belts of
Belt bucket elevators, 108m. height and
42m. height.
CCC
4Replacement of Chains and buckets of
2 Nos. Raw Mill elevators.CCC
5Major repairs to Lime stone stacker and
reclaimer Harrow, chain etc.SCC
6
Modification of 5 Nos. belt conveyors
take up structure and Major repairs to
Apron feeder.
SCC
7
Replacement of damaged bags,
straightening and reinforcing tube
sheets of kiln bag house.
NCC
8
Replacement of Raw Mill # 1 & 2
partition walls (Drying diaphragm) with
new structure fabricated from CDP.
YCC
9
Complete major repair of grate cooler,
including replacement of compact swing
elements, cross beams, removal of all
compact swing elements and re-aligning
the entire moving grates- 2 sets,
replacement of cooler plates,
modification to bull nose cooling etc.
NCC
10.
Complete overhauling of Apron feeder
below Limestone silo, including
modification to inlet chute, fabrication
and replacement of pingates with
modified one.
SCC
11Replacement of dip tube deflection
plates of 8 cyclones of VRM 1 & 2.SCC
12
Modification to IKN cooler (Clinker
cooler) of Kiln # 8, including extension
of grates, installation of modified plates
in KIDS.
SCC
13
Dismantling, shifting, Modifying and re-
installation of bins and feeders for
feeding limestone to CM 9 & 10.
SCC
14Supply and installation of various water
piping, storing and pumping systems.SCC
15Fabrication and supply of solid waste
cyclones lined with CDP 112.CRISTAL.
16.
Kiln supporting roller assembly
replacement, Kiln tyre re-positioning,
aligning and chair pads replacement.
NCC
17.
TA Duct expansion joint replacement,
Repairs to plate work of Kiln hood, TA
Duct and Preheater duct, cyclones, inlet
chamber.
NCC
18.Final alignment and spring plate welding
of kiln # 7 girth gear.SCC.
19.
Replacement of cooler vent duct (5m.
dia.x 22m. long at a height of 30m.)
from cooler outlet to EP, including
design and preparation of modified
drawings.
YCC
Kiln # 6 inlet and outlet shells (4.4m.
dia., 4.8m. long, 40mm. thick)
replacement with tip castings and
modified sealing arrangements.
SCC
20.Gas pipeline replacement 12” dia.
300m.SCC
21.Rehabilitation of burnt out limestone
conveyor over Hofuf highway.SCC
22.
Replacement of ducts from Cement mill
outlet to bag filter (1.8m. dia. x 20m.
long)- 2 Nos.
YCC
23.
Replacement of system fan outlet ducts
in Raw Mills. (2.6m. dia. x 15m. long at
+32m. elevation)- 2 Nos.
YCC
24.Kiln # 6 -Cooler ESP, electrodes and
GD Screen replacement.SCC
25.
Cement Mill and drive alignment
checking, slide shoe bearings
replacement and support services for
tyre (Slide Ring) grinding,
YCC
26.Upper bearing replacement for Rotary
stacker for Lime stone. Very special job.
ACC
27.
Replacement of mill outlet duct elbow,
cyclones and cyclone outlet ducts for
Losche Make VRM. (150 Tons of
dismantling and re-erection in a
constrained space, ie. Building with
roof, in 19 days)
ACC
28.
Re-conditioning worn out Raw Mill
classifier fan impeller and dynamic
balancing.
YCC
29.
Inspection, repair, heat treatment and
Ultrasonic testing of Kiln support Roller-
INSITU.
NCC.
30.
Dismantling of Clay drier complete with
support rollers, girth gear & drive
station, chutes and ducts and storage.
Dismantling of lime stone drier complete
with rollers, drive station, chutes,
hoppers etc., shifting and re-erection at
clay drier location and commissioning.
YCC
31.
Fabrication, supply and replacement of
the grit funnel of LOESCHE Mill with
double side cladded CDP plate.
ACC.
32.
Fabrication and supply of 3 Nos.
Seperator Cyclone complete with wear
resistant liners.
YCC.
33.
Fabrication and supply of Lower Cone
and Furnace Middle Cone with 25 thk.
CDP Plate, for HADEED.
GSS Indl. Services.
34.
Fabrication, supply and erection of
complete, including bend Airlift
discharge Pipes from ground to Pre-
heater top with CDP. Total length 180m.
ACC.
35.Fabrication and supply of Pipe Bends,
24 nos. for HADEED.GSS Indl. Services.
36.Repair of Lamellae of 2000 wide Apron
Conveyor, 60 nos.YCC.
37. Repair of cracked Kiln tyre. YCC.
38.
Repair of cracked Kiln tyre. Middle Tyre,
multiple cracks, one of them through
crack.
SPCC.
Bisha Plant
39.Repair of Cracked Trunnion and Mill
head.YCC
(A) PROJECT MANAGER’S PROFILE.
Name: BalachandraKumar.P.P
PROFESSIONAL SYNOPSIS
An Engineer with more than 25 years’ experience in Operations & Maintenance, Project Management,Maintenance Audit, Major Repairs, Erection & Commissioning in Cement Plants in India (ACC) and UAE(Sharjah Cement). Possess a rare combination of experience, viz. Operation and maintenance, Major Repairs,Projects and Contracting.
Expertise in various types of alignment jobs, identifying and implementing improvement projects, troubleshooting and eliminating root cause in problem areas and providing cost effective solutions.
Thorough knowledge of EPs (Electro Static Precipitators), Rotary Kilns.
An effective communicator with polished leadership, relationship management, planning, coordination andanalytical skills.
Experience of working under cross-cultural, multinational and multi-lingual environments.
KNOWLEDGE PURVIEW
Maintenance & Major repairs of the following equipment:
Complete cement plant equipment like Kiln / Clinker Cooler / Pre-Heater / Ball Mills / Vertical Mills /Crushers / Stackers, Reclaimers, various types of conveyors, Utilities (Hydraulic Systems, Compressors,Blowers, Water Pumps, Cooling Towers) & other related cement industry equipment.
Erection & commissioning of the following:
Kilns, mills, Bag Houses, ESPs, Conveyors, Compressors, Structures, Rails & Piping.
Well conversant with survey equipment like Theodolite, Auto Levels, Digital Total Stations etc. and its usagefor various alignment work of Mechanical equipment and structures, Rails etc.
Kiln Alignment, Kiln Drive installation, Kiln Shell Replacement, Girth Gear Reversal, Ball Mills Maintenance &Major Repairs, Shell Liner & Diaphragm Replacement, Planetary Gearbox Overhauling, Cyclo drivesoverhauling etc.
CORE COMPETENCIES
Operations & Maintenance Management
Oversee the functioning of Engineers, Experienced supervisors and a large workforce. Impart training toEngineers, Supervisors and Technicians.
Reporting progress on a regular basis to the client management and taking necessary steps to make up forany variances in the achieved against the actual targets.
Identifying bottlenecks and carry out de-bottlenecking.
Project Planning and Execution
Planning, describing scope, estimation, tracking & implementation of project plans within preset estimate.
Major Repairs.
Well conversant with analyzing the needs, planning and executing major repairs.Erection & Commissioning
Managing installation & commissioning of equipment to highest quality standard.
Ensuring completion of assignment with effective resource utilization to maximize the output.
We offer In Situ Thermal Spray Coating services for external &internal coatings of Process equipment, offshore structures,pipelines. Etc.Before Coating After Coating
Name of Person Designation
Dr. Tarek N. Al Akeel Chairman & CEO
Mr. Mohammed Abdul Moid KhanGeneral ManagerMobile No. +966 50 9391417E-Mail : [email protected]
Mr. Balachandra KumarProject ManagerMobile No. +966 54 8196141E-mail: [email protected]
Address for Communication
Head Office.
Post Box – 9906,Jeddah – 21423,Kingdom of Saudi Arabia
Telephone No’s: +966 12 690 1230 /1232Fax No: +966 12 690 1231E-Mail : [email protected] site: www.talakeel.com
Eastern Region Branch.
Al-Oleyaa Center – Al Khobar,Al- Akrbeya Dist., Makkah St.1st Floor, Office No. 109.
Tel: +966 13 8652474/ 8895131.Fax: +966 13 8895134.
Workshop
3279, Dallah Industrial Area,P.O. Box: 34542, Dammam 31478,Saudi Arabia.
Tel: +966 13 818 0814Fax: +966 13 818 0814