In particular, Demag · PDF filetravelling crane versions available from Demag Cranes &...
Transcript of In particular, Demag · PDF filetravelling crane versions available from Demag Cranes &...
EKKE-Bas single-girder overhead travelling crane with a straight box-section girder – one of the Bas overhead travelling crane versions available from Demag Cranes & Components
407
64
-1
Demag Cranes & Components is a world leader offering solutions for material flow, logistics and industrial drive applications with subsidiaries and production facilities worldwide.
The range of products includes:■■ cranes■■ hoists■■ drive technology■■ services.
We place uncompromising priority on meeting customers’ needs, so that our products and services can be seamlessly integrated into each customer’s value creation process.
Bas products – functionality driven by German engineeringWe have developed our Demag Bas products specifically with the world’s emerging markets in mind. The uncom-promising functionality and quality of these products have been designed to meet the high standards you have come to expect of German engineering.
In particular, Demag Bas products are:
■■ functional and reliable■■ tough and robust■■ safe and durable■■ economical to run■■ simple to operate■■ easy to maintain.
Demag Bas products – robust, durable engineering
2
Demag EKKE-Bas single-girder overhead travelling cranes and ZKKE-Bas double-girder overhead travelling cranes have load capacities of up to 12.5 t and stand head and shoulders above other products in this class due to their key features:
■■ safe, economical operation■■ long service life■■ high system rigidity ■■ straight or bevelled girder ends to match individual requirements
■■ good value for money.
Bas single and double-girder overhead travelling cranes –highly cost effective crane installations
The perfect crane solutionDemag Bas cranes are made up of:
■■ one or two crane girders■■ end carriages with travel and drive units
■■ double-rail or or standard-headroom travelling hoists
■■ electrical enclosure for the control system
■■ trailing cables for power supply and control pendant
■■ plug connectors.All the components are matched to each other and reflect the excellent crane engineering capabilities of Demag Cranes & Components.
EZDR-Bas double-rail crab
EKDR-Bas low-headroom travelling hoist
EUDR-Bas standard-headroom travelling hoist
Operation on standard crane runway railsBas single-girder and double-girder overhead travelling cranes can easily be run on crane runway rails typically found in the country of installation, such as P-rails and flat steel rails.
EKKE-Bas single-girder overhead travelling crane
40
820
40
651-
1
40
650
-1
40
652-
1
P-rail Flat steel rail
ZKKE-Bas double-girder overhead travelling crane
40
821
3
Cross trave
l: max. 2
0 m/min
EKKE-Bas single-girder overhead travelling crane –high rigidity with minimum deadweight
Crane girder assembly plate between end carriage and crane girder provides conventional bolted connections
Connection between end carriage and crane girder
■■ Crane girder supported by DFW-Bas end carriages
■■ Conventional bolted joint■■ Simple installation
■■ easy adjustment■■ simple pre-assembly■■ rapid final assembly■■ no special tools required
■■ Simple dismantling.
Proven trailing cables for power supply and control pendant with plug-in connectors
407
65-1
407
64
-3
EKKE-Bas single-girder overhead travelling cranes combine maximum possible rigidity with a low deadweight. This keeps the load on the crane runway low, and a cost-effective design can be selected for the building.
Torsionally rigid constructionAs with the crane end carriages, the crane girder is designed as a rigid box-section, which minimises torsion and guarantees excellent running characteristics.
High-performance rope hoistsEKKE-Bas cranes are preferably equipped with EKDR-Bas low-headroom travelling hoists. The advantage of this design is the increased hook path, i.e. extended lifting height and the small approach dimensions.
4
At a glance
■■ High rigidity with minimum deadweight
■■ Span: up to 30 m■■ Load capacity: up to 12.5 t■■ Long travel: max. 40 m/min■■ Cross travel: max. 20 m/min■■ Max. hoist speed: 12 m/min■■ Improved utilisation of the production area thanks to minimum hoist approach dimensions.
Optional: EUDR-Bas standard-headroom travelling hoist
Hoist speed: max. 12 m/min
Standard: EKDR-Bas low-headroom travelling hoist
Max. load capacity12,5 t
40
650
-1
40
651-
1
Long travel: max. 40 m/min
40
820
Depending on the installation environment, the ends of the crane girder are manufactured either straight (Type 1) or bevelled (Type 2) and are supported by DFW-Bas end carriages
Two designs to cater for different fitting requirements
Type 1
Type 2
5
ZKKE-Bas double-girder overhead travelling crane –high load capacities over a large span
Connection between end carriage and crane girder
■■ Crane girder supported by DFW-Bas end carriages
■■ Conventional bolted joint■■ Simple installation
■■ easy adjustment ■■ simple pre-assembly■■ rapid final assembly■■ no special tools required
■■ Simple dismantling.
* 1,400 / 2,240 and 2,800 mm
Crab gauge*
Crane girder assembly plate between the crane girders and the end carriages for conventional bolted connections
407
65-1
407
66-2
Proven trailing cables for power supply and control pendant with plug-in connec-tors
ZKKE-Bas double-girder overhead travelling cranes are intrinsically very rigid, which enables them to provide high load capacities over a large span.
Torsionally rigid constructionAs with the single-girder overhead travelling cranes, the crane girders and end carriages on the double-girder overhead travelling cranes are rigid box-girder designs. This means the cranes have excellent travel characteristics coupled with maximum torsional stability, minimum wear on the travel wheels and crane runways.
High-performance rope hoistsZKKE-Bas double-girder overhead travelling cranes are used in conjunction with the EZDR-Bas double-rail crab. The particularly good lifting height is derived from the fact that the load hook can be raised between the two crane girders. This feature, combined with the hoist at right-angles to the crane girder, makes it possible to achieve outstanding hoist approach dimensions.
6
EZDR-Bas double-rail crab allows for greater loads over larger spans
Hoist speed: max. 12 m/min
Max. load capacity 12,5 t
At a glance
■■ High performance thanks to double-girder design
■■ Span: up to 35 m■■ Load capacity: up to 12.5 t■■ Long travel: max. 40 m/min■■ Cross travel: max. 25 m/min■■ Max. hoist speed: 12 m/min■■ Outstanding crane geometry ensures excellent travel characteristics and minimised wear on travel wheels and crane runways.
Long travel: max. 40 m/min
40
652-
1
Cross trav
el: max.
25 m/m
in
40
821
Depending on the installation environment, the ends of the crane girder are manufactured either straight (Type 1) or bevelled (Type 2) and are supported by DFW-Bas end carriages
Two designs to cater for different fitting requirements
Type 1
Type 2
7
Bas overhead travelling cranes –equipped with perfectly matched components
DFW-Bas L-Z crane end carriage on a ZKKE-Bas double-girder overhead travelling crane
DFW-Bas L-E crane end carriage on an EKKE-Bas single-girder overhead travelling crane
DFW-Bas crane end carriages include anti-derailment protection as standard
DFW-Bas crane end carriages ■■ Torsionally rigid, welded box-girder construction
■■ Available for: ■■ single-girder overhead travelling cranes as DFW-Bas L-E
■■ double-girder overhead travelling cranes as DFW-Bas L-Z
■■ Wheel base from 1,500 to 5,100 mm with corresponding drives
■■ Max. long-travel speed 40 m/min.■■ Particularly simple installation and maintenance thanks to good accessibility.
Guide plate welded to the steel superstructure of the DFW-Bas end carriage. This plate guides the WS-Bas wheel block, simplifies its alignment in the end carriage and is used to adjust the span.
407
65-2
Demag Bas crane sets
We also supply complete Bas crane sets which are designed on the plug-and-play principle and comprise the following components:
■■ DFW-Bas crane end carriages■■ travel units ■■ complete electrical equipment for crane and hoist unit
■■ a variety of different crab travelling hoists.
40
820
40
821
40
822
8
DST-Bas control pendant■■ Ergonomically designed and operator friendly
■■ Various length settings available■■ Mobile■■ Complies with local regulations:
■■ DST-Bas, cable-connected and mobile parallel to the crane girder
■■ two sizes, 7 and 9 buttons■■ for two speeds■■ all control cables of plug-in design
■■ strain relief cords are vulcanised to withstand the stresses of tough day-to-day use.
Demag travel units are easily fitted, maintained and, where necessary, removed. Special tools are not required.
MT-Bas motor
WS-Bas wheel block TG-Bas gearbox
Torque bracket
Crane control system■■ Completely modular and easy to access
■■ Conventional contactor control■■ Integrated isolator switch■■ IP54 enclosure for indoor use.
Power supply■■ Proven trailing cable■■ Integrated earth conductor■■ All control cables of plug-in design.
Travel units■■ Ideal combination of:
■■ WS-Bas wheel block ■■ TG-Bas gearbox ■■ MT-Bas motor
■■ Wheel block with:■■ large travel wheel tread (up to 90 mm)
■■ large wheel diameters (125, 160 and 200 mm for Bas overhead travelling cranes up to 12.5 t)
to ensure safe, reliable crane travel and to compensate for any possible crane runway tolerances
■■ Compact offset gearboxes with high efficiency ratings
■■ Pole-changing cylindrical-rotor brake motors for two speeds (8/2 pole) and separately controlled brake.
Bottom block ■■ Easy fitting of load-handling attachments
■■ Simple handling thanks to:■■ grip recesses on both sides ■■ DIN load hooks with generous hook opening
■■ Rope lead-in guard.
40
824
407
69-3
40
606
-14
407
64
-2
Electrical equipment
407
68
DST-Bas
9
Everything at a glance – simplified planning and project engineering
Crane span
Trolley approach dimension 2
Trolley approach dimension 1
Runw
ay h
eigh
t Load capacity t
Layout example
EKDR-Bas low-headroom travelling hoist
Travel wheel Ø d
Crane end carriages Wheel base ekt [mm] Travel wheel Ø d [mm]
DFW-Bas L-Z160/… 2,500 / 3,150 / 4,000 160
200/… 2,500 / 3,150 / 4,000 / 5,100 200
Crane end carriages Wheel base ekt [mm] Travel wheel Ø d [mm]
DFW-Bas L-E
125/… 1,500 / 2,000 / 2,500 / 3,150 / 4,000 125
160/… 2,000 / 2,500 / 3,150 / 4,000 160
200/… 2,000 / 2,500 / 3,150 / 4,000 200
Technical specifications of DFW-Bas end carriages for EKKE-Bas single-girder overhead travelling cranes
Technical specifications of DFW-Bas end carriages for ZKKE-Bas double-girder overhead travelling cranes
Wheel base ekt
A
A
Hoo
k pa
thControl pendant
Electrical enclosure for the control systemCrane
side 1Crane side 2
Perfectly plannedTo simplify your Bas overhead travelling crane planning phase, we have compiled the key data for you. You can use the diagrams and details of the DFW-Bas end carriages and DR-Bas rope hoists to define the required parameters.
DFW-Bas end carriage
10
Accompanying documentation■■ Technical catalogue for EKKE-Bas, dimensions, loads and forces, ident. no.: 203 740 44
■■ Technical catalogue for ZKKE-Bas, dimensions, loads and forces, ident. no.: 203 742 44
■■ DR-Bas rope hoist brochure, ident. no.: 213 693 44
■■ WS-Bas wheel block, TG-Bas gearboxes and MT-Bas motors brochure, ident. no.: 213 699 44
Technical specifications for DR-Bas rope hoists
Size Load capacity[t]
Hook path[m]
Hoist speed[m/min]
Group of mechanismsFEM/ISO
Load capacity[t]
Hook path[m]
Hoist speed[m/min]
DR-Bas 3
2/1 4/1
112 2030
12/2
4m / M7 261015
6/11.25 3m / M6 2.5
1.6 2m / M5 3.2
2 10/1.6 1Am / M4 4 5/0.8
DR-Bas 5
2/1 4/1
1.6122030
12/2
4m / M7 3.261015
6/12 3m / M6 4
2.5 2m / M5 5
3.2 10/1.6 1Am / M4 6.3 5/0.8
DR-Bas 10
2/1 4/1
3.2122030
10/1.7
4m / M7 6.361015
5/0.84 3m / M6 8
5 2m / M5 10
6.3 8/1.2 1Am / M4 12.5 4/0.6
■■ Cross-travel speed: ■■ EUDR-Bas: 5/20 m/min■■ EKDR-Bas: 5/20 m/min■■ EZDR-Bas: 6.3/25 m/min
■■ Flange width ranges:■■ EUDR-Bas 3 and 5: 110 – 300 mm■■ EUDR-Bas 10: 116 – 300 mm■■ EKDR-Bas 3 and 5: 110 – 400 mm■■ EKDR-Bas 10: 116 – 400 mm
■■ Voltage: 380 – 415 V, 50 Hz■■ Control voltage: 48/110 V, 50 Hz■■ Type of enclosure: IP54
■■ Standard track gauges EZDR-Bas: 1,400 / 2,240 / 2,800 mm
11
Dynamic markets need dependable solutions
Easy to maintainDemag EKKE-Bas single-girder overhead travelling cranes and ZKKE-Bas double-girder overhead travelling cranes are made up of reliable, functional components. Maintenance and repair – whether on complete units or individual components – are quick and easy on this quality product designed and built to European standards.
If you do not do your own maintenance, service and repair, Demag’s Service engineers with their technical experience and skills are ready to help quickly and efficiently.
Reliable spare parts supply Spare parts for the Bas drives system are supplied:
■■ quickly and flexibly through our integrated network of branch offices and partners
■■ with absolute reliability for many years
■■ at particularly attractive value- for-money prices.
Demag ServiceYour reliable partner – ensuring safe and efficient operation and maintaining the value of your investment.maintaining the value of your investment.
Capable after-sales service ensures the highest degree of availability
403
57-2
3
0212
EN
/UA
E
213
700
44
EN
701
IS 1
10N
o lia
bilit
y fo
r er
rors
or
omis
sion
s. S
ubje
ct t
o ch
ange
.
Demag Cranes & Components (Middle East) FZEPO Box 16852Jebel Ali, Dubai, UAEPhone: +971 48120800 Fax: +971 48836861 Email: [email protected]