Improve Manufacturing Process by Using Line Balancing...
24
NATIONAL TECHNICAL UNIVERSITY COLLEGE OF MALAYSIA Improve Manufacturing Process by Using Line Balancing Method to Reduce Cycle Time Thesis submitted in accordance with the requirements of the National Technical University College of Malaysia for the Degree of Bachelor of Manufacturing Engineering (Honors) (Manufacturing Process) By Elvie Rosmieza Bt Mobd Zawawi Faculty of Manufacturing Engineering June 2006 © Universiti Teknikal Malaysia Melaka
Transcript of Improve Manufacturing Process by Using Line Balancing...
NATIONAL TECHNICAL UNIVERSITY COLLEGE OF MALAYSIA
Improve Manufacturing Process by Using Line Balancing Method to Reduce
Cycle Time
Thesis submitted in accordance with the requirements of the
National Technical University College of Malaysia for the Degree of
Bachelor of Manufacturing Engineering (Honors) (Manufacturing Process)
By
Elvie Rosmieza Bt Mobd Zawawi
Faculty of Manufacturing Engineering
June 2006
© Universiti Teknikal Malaysia Melaka