Implementasi TNA untuk Kegiatan Alih Teknologi dibawah Mekanisme UNFCCC
-
Upload
dewan-nasional-perubahan-iklim -
Category
Environment
-
view
137 -
download
0
Transcript of Implementasi TNA untuk Kegiatan Alih Teknologi dibawah Mekanisme UNFCCC
Implementasi TNA untukKegiatan Alih Teknologi
dibawah Mekanisme UNFCCC
KELOMPOK KERJA ALIH TEKNOLOGI DNPI
11 September 2014
Isu Alih Teknologi
2
Alih Teknologi merupakan pendukung aksi adaptasi dan mitigasiperubahan iklim pada berbagai tahapan technology cycle, yaitu R&D, penyebar luasan, difusi dan alih teknologi
Pada COP 16 di Cancun-Mexico:
Terbentuk Mekanisme Teknologi (Technology Mechanism), yang terdiri dari: Technology Executive Committee (TEC), dan Climate technology Center & Network (CTCN).
Sejak saat itu TEC mulai beroperasi, dengan tugas memberikan arahan
CTCN mulai beroperasi pada tahun 2013, dengan host adalah UNEP dengan 11 konsorsium.
Mendapat arahan dari Advisory Board.
Tugas CTCN adalah memfasilitasi implementasi alih teknologi.
Di negara berkembang semua aktivitas implementasi alih teknologidikoordinasikan melalui Institusi National Designated Entity (NDE), sebagai focal point imp;ementasi alih teknologi bekerjasama denganCTCN
NDE Indonesia berada di bawah DNPI.
4
Proposal ke CTCN
Kriteria1. Berasal dari prioritas TNA (Technology Needs
Assesment) tahun 2010 dan 2012 atauprioritas lain
2. Sesuai dengan prioritas dan kebijakan Nasionalatau sektor
3. Berkontribusi pada pembangunanberkelanjutan dan rendah karbon
4. Mendukung kemandirian teknologi
Hasil TNA Tahun 2010 (Mitigasi)
5
Dilakukan pada 7 sektor, yaitu: Sektor Energi Sektor Industri Sektor Transportasi Sektor Kehutanan Sektor Pertanian Sektor Kelautan Sektor Limbah
Hasil TNA Tahun 2012 (Mitigasi)
6
Rank Technology for Forestry Sector Technology for Energy SectorTechnology for Waste
Sector
1.Carbon sequestration measurement
and monitoring for reducing emissionPhoto Voltaic (PV)
Mechanical biological
treatment
2. Peat re-mappingRegenerative burner combustion
system (RBCS)In-vessel composting
3. Water Management on PeatlandImprovement of public
transportationLow-solid anaerobic digestion
4.Best cultivation practices compliant
with < 3m peatWind Power High solid anaerobic digestion
5. Intensive Silviculture Technology Geothermal Vertical fixed bed gasification
6.Zero burning technology (for forest
conversion) and fire managementAdvanced coal power plant RDF-fired combustion
7.Reduced logging impact in
production forestBiomass power plant Fluidized bed combustion
8. Site species matching Efficient electric motorHorizontal fixed bed
gasification
9. Advanced Tree Improvement Intelligent transport system Mass-fired combustion
10. Molecular biology for log tracking Efficient pump system Fluidized bed combustion
List of 10 Technology Needs in Mitigation
Hasil TNA Tahun 2012 (Adaptasi)
7
Rank Technology for Food SecurityTechnology for Coastal
VulnerabilityTechnology for Water resources
1.Crop (rice) tolerance to drought and
flood
Coastal Protector
Building Technology (Seawall or
Revetment)
Rain water harvesting technology
2.Technology for mariculture
developmentCoastal Reclamation Technology
Recycle water technology from
domestic waste water
3. Cattle meat technology development Groyne Technology Modeling for water resources
4.Efficient irrigation technology
(intermitten, SRI, PTT)
Technology for coral reef and
seagrass restorationPolder and pumping technology
5. Appropriate Cropping CalendarFish aggregating device
technology
Artificial rain technology (weather
modification technology)
6.The technology of production, storage
and distribution of seeds and seedling
Water gate and tidal barrier
technology
Monitoring and early warning
system
7.
Reliable climate prediction with
adequate lead time for tropical
archipelago
Floodwalls system technology Artificial wetland
8.Training of the farmer through field
climate school
Detached Breakwater
TechnologyEco-hydrology for river
9.Dev of decision support system for
dissemination of appropriate techn.Artificial sand dunes technology Ground water injection technology
10.Technology of conservation and
optimizationBio-filtration technology
List of 10 Technology Needs in Adaptation
Prioritas Alih Teknologi dalam Dokumen TNA
8
Sector Technology Mitigation Sector Technology Adaptation
Energy
Photovoltaic (PV)
Food Security
Crop (rice) tolerance to drought
and flood
Mariculture development
RBCSBeef cattle farming technology
Forestry
Measurement and monitoring
of carbon sequestration and
emission Water
Resources
Technologies for rain water
harvesting (well and infiltration
pond),
Peat re-mapping Domestic water recycling
Water managementModeling for water resource
potential projection
Waste
Mechanical biological
treatment
Coastal
Vulnerability
Coastal Protector
Building Technology (Seawall or
Revetment)
In-vessel composting
Coastal Reclamation TechnologyLow-solid anaerobic digestion
CTCN MISSION AND FUNCTION
Mission“TO STIMULATE TECHNOLOGY COOPERATION AND ENHANCE THE
DEVELOPMENT AND TRANSFER OF TECHNOLOGIES TO DEVELOPING COUNTRY PARTIES AT THEIR REQUEST.”
Parties to the UNFCCC
Main Function• Manage requests from developing country National Designated
Entities (NDEs) and deliver responses• Foster collaboration and access to information and knowledge
to accelerate climate technology transfer• Strengthen networks, partnerships and capacity building for
climate technology transfer
9
CTCN POSSIBLE SERVICES
10
Responding to Country Request
Providing advice
Providing information
Providing training
Providing technical support
Facilitating Deployment of
Existing Technologies
Twinning programmes& deployment/market
transformation programmes
Private sector engangement & public
private partnerships
Training programmes on project financing
Forums to promote investments
Stimulating Development and
Transfer of Technologies
Collaborative research and development
Capacity strengthening of
technology centreand institutions
Forums to stimulate action bring
together different actors
CTCN STRUCTURE
• Core Centre co-managed by UNEP and UNIDO, backed by partner institutions
• Main support provided through the Network
11
NATIONAL DESIGNATED ENTITIES
13
Mission“NDES WILL ACT AS CTCN FOCAL POINT IN THE COUNTRIES AND
MANAGE THE SUBMISSION OF REQUESTS FOR TECHNICAL ASSISTANCE”
Parties to the UNFCCC
CTCN Focal Point• Explain the CTCN to institutions and organizations in the
country• Coordinate activities between the country and the CTCN• Coordinate participation of country officials in CTCN
programmes• Report on the effectiveness of CTCN support• Provide feedback on how the CTCN can improve its support
NATIONAL DESIGNATED ENTITIES
14
Support CTCN assistance• Identify good requests to submit to the CTCN• Link requests with national priorities and processes• Coordinate discussions with the CTCN on requests and any needed
refinements• Provide guidance and oversight of the work of national teams
collaborating with the CTCN• Monitor CTCN assistance and inform the CTCN of any need for
adjustments
Contribute to CTCN capacity building efforts• Identify possible Network members• Provide to national organizations information on the Network• Identify needs and opportunities for regional and global peer
learning• Help organize national and regional capacity building events
NDE INDONESIA
15
• NDEs adalah lembaga yang berfungsi untuk memfasilitasi pelaksanaanalih teknologi perubahan iklim di bawah kerangka UNFCCC di Indonesia. Focal point NDE berada di bawah Dewan Nasional Perubahan Iklim(DNPI).
• Tugas yang diamanatkan ke NDE adalah sebagai berikut:1. Menjadi “focal point” nasional dalam implementasi alih teknologi bekerja
sama dengan CTCN.2. Mengatur proses submisi proposal alih teknologi nasional kepada CTCN dan
melakukan prioritisasi proposal yang akan diajukan dari sektor terkait.3. Mengidentifikasi prioritas teknologi dan pengembangan kapasitas yang
sejalan dengan strategi pembangunan nasional terkait perubahan iklim. 4. Memfasilitasi proses konsultatif untuk mendorong pemerintah maupun
sektor swasta berkoordinasi dan berkolaborasi dalam menentukan strategi implementasi alih teknologi untuk mendukung aksi mitigasi dan adaptasi.
5. Melakukan proses komunikasi dan memberikan umpan balik serta follow up kepada CTCN.
SEKRETARIAT NDE
16
Kegiatan operasional harian NDE didukung oleh Sekretariat yang berada dibawah DNPI.
Sekretariat bertugas:• Mendukung pekerjaan NDE ( Komite NDE dan Komite Teknis/ Tenaga
ahli). • Membuat pedoman mekanisme persetujuan/approval, modalitas dan
prosedur, perekrutan konsultan dan pekerjaan dari Sekretariat.• Menyiapkan Standar Operasional Prosedur (SOP) untuk keperluan teknis
agar transparan, akuntable dan efektif.
Sekretariat juga bertanggung untuk :• Call of proposals• Memantau dan mengevaluasi program dan pelaksanaan pekerjaan yang
dilaksanakan oleh CTCN• Mengelola proposal
20
Proposal ke CTCN
Kegiatan yang dilakukan terbatas pada Technical Assisstance
Dana relatif kecil, maksimal 250.000 USD
Bentuk proposal yang dapat diajukan misalnya asistensiteknis untuk : pembuatan strategi implementasi, enabling environment, feasibility studies, penyiapan dokumen kegiatan lain , seperti NAMas aksensuntuk pendanaan implementasi alih teknologi
Diharapkan masukan dan usulan dari sektor-sektor agar dapat didiskusikan untuk diajukan ke CTCN.
21
Proposal ke CTCN
Beberapa sektor telah diidentifikasi lebih lanjut untukdibuat proposal kepada CTCN:
1.Pemanfaatan Biowaste Contohnya limbah sawit2.Sektor Pertanian
22
Contoh Identifikasi yang dilakukan terkait Limbah Kelapa Sawit
Latar Belakango Luas lahan perkebunan kelapa sawit: 7.873.840 hektaro Jumlah industri pengolahan: 608 industrio Jumlah limbah batang yaitu 314.954 ha/tahun atau 40.314.112
pohon/tahuno Jumlah limbah tandan kosong basah sebanyak 39.369.200 ton/tahuno Jumlah limbah pelepah sawit sebanyak 81.887.936 ton/tahuno Jumlah limbah cair kelapa sawit (POME) sebesar 17.145 m3/jam
Peluang Pemanfaatano Pengolahan POME dapat menghasilkan energi listrik 2.057 MWo Jika limbah padat dibuat pellet dapat dihasilkan 26,985,870 ton/tahun
dengan nilai kalori sebesar 3.650 kkal/kgo Potensi Penurunan Emisi:
• limbah padat sebesar 33.6 juta ton CO2/tahun• limbah cair sebesar 15 juta ton CO2e/tahun
24
Contoh Identifikasi yang dilakukan terkait Sektor Pertanian
• Varietas Padi Resistant Perubahan IklimJudul program: Enabling Framework for Implementation of Climate Change Adaptive Paddy Varieties to Support National Food Security through Multilevel Institutional Cooperation
Latar Belakango Perubahan iklim akan berdampak pada sektor ketahanan pangan khususnya pertanian
dimana semakin meningkatnya intensitas bencana banjir, kekeringan atau intrusi air laut. Atas dasar itu diperlukan upaya atau strategi untuk mediseminasikan varietaspadi yang resistant terhadap banjir, kekeringan ataupun salinitas tinggi.
Peluang Pemanfaatano Diharapakan teratasinya hambatan dalam proses diseminasi varietas padi baik itu
aspek finansial, teknologi, institusi, sosial dan aspek lain yang terkait. Kemudian dapattersedianya bibit padi tahan kekeringan, banjir dan salinitas di setiap daerah agar dapat dekat dengan petani. Serta meningkatnya kapasitas dan pengetahuan petani, penyuluh serta pemerintah daerah mengenai varietas padi tahan kekeringan, banjirdan salinitas tinggi.
26
Konsep Pengembangan dan Alih Teknologi RBCS
PotensiAkan dikembangkan ke 72 industri baja (yang menggunakan reheating furnace) dan industri lain seperti keramik, kaca, semen dan lain-lain.
Keuntungan (berdasarkan implementasi di PT.GunungGaruda)• Menurunkan konsumsi energi sebesar 34,92% dengan
jumlah 6.261.000 Nm3 gas/tahun• Menurunkan emisi sebesar 12,764.4 ton CO2/tahun• Meningkatkan kualitas dan kuantitas (save 1,38% materials)• Return of investments dalam waktu 13 bulan
Cost of Upgrade = 6,500,000 USD Fuel Savings = 1,292,944 USD/year Scale Savings = 2,223,378 USD / Year Increase Production= 2,443,950 USD/Year Total Savings + Increase Earnings= 5,960,272 USD/Year
Permasalahan• Investasi mahal 4 juta USD + down time untuk instalasi 3
bulan dengan nilai 2,5 juta USD• Teknologinya masih harus import
27
Konsep Pengembangan dan Alih Teknologi RBCS
Sebagai lesson
learn untuk
penyiapan
institutional
arrangements dan
mekanisme
pendanaan maka
diperlukan demo
project dengan
tahapan sebagai
berikut:
• Program
Development
• Program
execution
• Monitoring dan
Evaluasi
Diperlukan
mekanisme
pendanaan
dikarenakan:
• Teknologi RBCS
feasible tetapi
investasinya
mahal
• Untuk
menyalurkan
dana
internasional
sebagai sumber
pendanaan
Institutional arrangements
untuk Alih TeknologiDemonstration
Project
Mekanisme
Pendanaan
Knowledge
Management
Technical
Support
• Mapping
• Collect
Information
• Capacity
Building
• Regional
Collaboration
Technical
Assistance
bagi
Industri
untuk
Pemasang
an RBCS
INOVASI
TEKNOLOGI
• R&D
(Regenerator
, Control
System and
Burner
System)
• Laboratory
(Testing,
Standardizati
on, and
Certification)
28
Konsep Pengembangan dan Alih Teknologi Solar PV Rooftop
Latar Belakang60% konsumsi listrik nasional berada di pulau Jawa. Serta untuk mendukung kontribusi Energi Baru Terbarukandalam bauran energi nasional sebesar 25% (visi 25/25).
Keuntungan• Menurunkan emisi• Menciptakan market untuk pemanfaatan solar PV
Permasalahan• Investasi belum feasible dengan harga listrik saat ini• Lack of the financial mechanism for financing Solar PV
roof top grid connected systems • Insufficient Technical Know How of Solar PV Rooftop/
Lack of Technical Capacity• Lack of Sufficient Standard, Qualified Testing
Laboratory and Certification Body