Immediate boarding to success Ready for delivery - GFMS€¦ · HSM 800 Mikron HEM 500U M123#4300 5...
Transcript of Immediate boarding to success Ready for delivery - GFMS€¦ · HSM 800 Mikron HEM 500U M123#4300 5...
GF Machining Solutions
Immediate boarding to success
Readyfor delivery
More than 60 machines, System 3R automation, rConnect activation kit and SMART wire are ready to be delivered.
From September to December we offer you a selection of new, used and ex-demo machines.Come on board! You can count on a service that combines innovative solutions, variety of technology and unique competencies.If you can’t find exactly what you need, don’t remain on the ground! Contact us and we will provide you the right solution!
Take off to your Machining Solution in 2017
MikronMILL P 800 U
Mikron VCP 800W Duro
Mikron MILL E 500 U
Mikron VCE 1000 Pro
M123#4300
The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
GF Machining Solutions Ready for delivery4
Reference No. M162#401 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20,000 rpm – (HSK A63)
Nr. of axes: 3
Pallet change: No
Tool magazine: 30 tools
Machine location: Switzerland
Available from: Immediately
Warranty: 3 months
Year of manufacture: 2014
Reference No. M162#402 Demo machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20,000 rpm – (HSK A 63)
Nr. of axes: 5
Pallet change: No
Tool magazine: 30 tools
Machine location: Switzerland
Available from: On demand
Warranty: 12 months
Year of manufacture: 2017
Reference No. M162#403 New machine
Rapid traverse speed: 40 m/min
Spindle rpm: 16,000 rpm – (ISO/BT40)
Nr. of axes: 3
Pallet change: No
Tool magazine: 40 tools
Machine location: Switzerland
Available from: Immediately
Warranty: 12 months
Year of manufacture: 2016
Reference No. M192#4400 Demo machine
Rapid traverse speed: 60 m/min
Spindle rpm: 20,000 rpm
Nr. of axes: 5
Pallet change: 2 positions
Tool magazine: ATC 120 tools
Machine location: Germany
Available from: End of October 2017
Warranty: 24 months
Milling
Special
OfferingrConnect
Our solutions
DEPARTURES
MikronHEM 1200
Mikron HEM 1200
MikronHSM 800
Mikron HEM 500U
M123#4300
GF Machining Solutions Ready for delivery5 The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
Reference No. M123#4299 New machine
Rapid traverse speed: 35 m/min
Spindle rpm: 20,000 rpm – (HSK A63)
Nr. of axes: 3
Pallet change: No
Tool magazine: 30 tools
Machine location: Poland (RTM)
Available from: Immediately
Warranty: 12 months
Year of manufacture: 2016
Reference No. M123#4300 New machine
Rapid traverse speed: 35 m/min
Spindle rpm: 20,000 rpm – (HSK A63)
Nr. of axes: 3
Pallet change: No
Tool magazine: 30 tools
Machine location: Poland (RTM)
Available from: Immediately
Warranty: 12 months
Year of manufacture: 2016
Reference No. M108#4311 Used machine
Rapid traverse speed: 40 m/min
Spindle rpm: 36,000 rpm – (HSK 50 E)
Nr. of axes: 3
Pallet change: Yes
Tool magazine: 60 tools
Machine location: Spain
Available from: Inmediately
Warranty: 3 months
Year of manufacture: 2005
Features: New Spindle
Reference No. M105#404 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 12,000 rpm – (ISO/B40)
Nr. of axes: 5 - (3+2)
Pallet change: No
Tool magazine: 30 tools
Machine location: UK
Available from: Immediately
Warranty: 12 months
Year of manufacture: 2015
MikronVCE 800W Pro
MikronMILL P 800 U
MikronHEM 700U
Mikron HSM 200U LP
The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
GF Machining Solutions Ready for delivery6
Reference No. M105#405 Used machine
Rapid traverse speed: 40 m/min
Spindle rpm: 14,000 rpm (ISO/40 with TSC)
Nr. of axes: 3
Pallet change: No
Tool magazine: 40 tools
Machine location: UK
Available from: Immediately
Warranty: 6 months
Year of manufacture: 2015
Programme run hours: 3286
Reference No. M107#406 New machine
Rapid traverse speed: 60 m/min
Spindle rpm: 20,000 rpm
Nr. of axes: 5
Pallet change: 7 positions
Tool magazine: 170 tools
Machine location: Nidau
Available from: November 2017
Warranty: 12 months
Reference No. M107#4320 New machine
Rapid traverse speed: 17/28 m/min (Gearbox)
Spindle rpm: 20,000 rpm
Nr. of axes: 5 simultaneously
Pallet change: No
Tool magazine: 60 tools
Machine location: Italy
Available from: Immediately
Warranty: 12 months
Reference No. M191#4384 Demo machine
Rapid traverse speed: 42 m/min
Spindle rpm: 50,000 rpm – (HSK E32)
Nr. of axes: 5
Pallet change: 14 x GPS 120
Tool magazine: 60 tools
Machine location: Factory Stock (CH)
Available from: December 2017
Warranty: 6 months
Special
OfferingrConnect
Milling
DEPARTURES
Mikron MILL E 500 U
Mikron MILL E 500 U
Mikron MILL E 500 U
MikronMILL E 500 U
GF Machining Solutions Ready for delivery7 The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
Reference No. M191#408 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20,000 rpm (HSK A63)
Nr. of axes: 5
Pallet change: No
Tool magazine: 30 tools
Machine location: Factory Stock (CH)
Available from: December 2017
Warranty: 6 months
Reference No. M191#409 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20.000 rpm (HSK A63)
Nr. of axes: 5
Pallet change: No
Tool magazine: 30 tools
Machine location: Factory Stock (CH)
Available from: December 2017
Warranty: 6 months
Reference No. M191#410 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20,000 rpm (HSK A63)
Nr. of axes: 5
Pallet change: No
Tool magazine: 30 tools
Machine location: Factory Stock (CH)
Available from: December 2017
Warranty: 6 months
Reference No. M191#407 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20,000 rpm (HSK A63)
Nr. of axes: 5
Pallet change: No
Tool magazine: 30 tools
Machine location: Factory Stock (CH)
Available from: December 2017
Warranty: 6 months
Mikron MILL E 500 U
Mikron MILL E 500 U
Mikron MILL E 700 U
Mikron MILL E 700 U
The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
GF Machining Solutions Ready for delivery8
Reference No. M191#411 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20,000 rpm (HSK A63)
Nr. of axes: 5
Pallet change: No
Tool magazine: 30 tools
Machine location: Factory Stock (CH)
Available from: December 2017
Warranty: 6 months
Reference No. M191#412 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20,000 rpm (HSK A63)
Nr. of axes: 5
Pallet change: No
Tool magazine: 30 tools
Machine location: Factory Stock (CH)
Available from: December 2017
Warranty: 6 months
Reference No. M191#413 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20,000 rpm (HSK A63)
Nr. of axes: 5
Pallet change: No
Tool magazine: 30 tools
Machine location: Factory Stock (CH)
Available from: December 2017
Warranty: 6 months
Reference No. M191#414 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20,000 rpm (HSK A63)
Nr. of axes: 5
Pallet change: No
Tool magazine: 30 tools
Machine location: Factory Stock (CH)
Available from: December 2017
Warranty: 6 months
Milling
DEPARTURES
AgieCharmillesCUT P 350
Mikron MILL E 700 U
AgieCharmillesCUT 2000 X
AgieCharmillesCUT 2000 OilTech
GF Machining Solutions Ready for delivery9 The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
Wire-cutting EDM
Reference No. M192#4402 Demo machine
X, Y, Z travel (w,d,h): 350 x 250 x 256 mm
Max workpiece dimensions (w,d,h): 750 x 550 x 250 mm
Wire Diameters 0.10 mm - 0.30 mm
Roughness (Ra): 0.07 µm
Smart Options:Xtreme Precision AWC, Automationkit, IVU
Machine location: Germany
Available from: End of September 2017
Warranty: 24 months
Reference No. M191#415 New machine
Rapid traverse speed: 30 m/min
Spindle rpm: 20,000 rpm (HSK A63)
Nr. of axes: 5
Pallet change: No
Tool magazine: 30 tools
Machine location: Factory Stock (CH)
Available from: December 2017
Warranty: 6 months
Reference No. M162#4372 Used machine
X, Y, Z travel (w,d,h):: 350 x 250 x 256 mm
Max workpiece dimensions (w,d,h): 750 x 550 x 250 mm
Wire Diameters 0.1 mm - 0.25 mm
Roughness (Ra): 0,05 µm
Smart Options: AWC, 3D Setup, TE
Machine location: Switzerland
Available from: On demand
Warranty: 6 months
Year of manufacture: 2015
Reference No. M192#4403 Demo machine
X, Y, Z travel (w,d,h): 350 x 220 x 220 mm
Max workpiece dimensions (w,d,h): 1000 x 550 x 220 mm
Wire Diameters 0.250 mm - 0.070 mm
Roughness (Ra): 0.1 µm
Smart Options:Automationkit, Thermostabilization, Advanced Precision
Machine location: Germany
Available from: End of September 2017
Warranty: 24 months
SMARTwire
Special
Offering
Special
OfferingrConnect
AgieCharmilles CUT E 350
AgieCharmillesCUT P 550
AgieCharmillesCUT 300 Sp
AgieCharmilles CUT P 550
The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
GF Machining Solutions Ready for delivery10
Reference No. M108#4422 Demo machine
X, Y, Z travel (w,d,h):: 550 x 350 x 400 mm
Max workpiece dimensions (w,d,h): 1000 x 700 x 400 mm
Wire Diameters 0.33 – 0.15 mm
Roughness (Ra): 0.1 µm
Smart Options: No
Machine location: Spain
Available from: December 2017
Warranty: 3 months
Year of manufacture: 2017
Reference No. M127#4322 Demo machine
X, Y, Z travel (w,d,h): 350 x 250 x 250 mm
Max workpiece dimensions (w,d,h): 820 x 680 x 250 mm
Wire Diameters 0.25 mm
Roughness (Ra): 0.12 - 0.18 µm
Smart Options: No
Machine location: Czech Republic
Available from: Begining of November 2017
Warranty: 12 months
Reference No. M162#102 Demo Machine
X, Y, Z travel (w,d,h): 550 x 350 x 400 mm
Max workpiece dimensions (w,d,h): 1200 x 700 x 400 mm
Wire Diameters 0.15 mm - 0.33 mm
Roughness (Ra): 0.1 µm
Smart Options: Wire chopper, 3D Setup
Machine location: Switzerland
Available from: September 2017
Warranty: 12 months
Reference No. M127#4323 Demo machine
X, Y, Z travel (w,d,h):: 550 x 350 x 400 mm
Max workpiece dimensions (w,d,h): 1000 x 700 x 400 mm
Wire Diameters 0,25 mm
Roughness (Ra): 0,1 µm
Smart Options:Kit for wire diam. 0,1 mm, Position Reduction, Cromium Hardnedened table, Big spool unit 25 kg
Machine location: Czech Republic
Available from: Begining of November 2017
Warranty: 12 months
SMARTwire
Special
Offering
SMARTwire
Special
Offering
Wire-cutting EDM
DEPARTURES
AgieCharmilles AC Progress VP3
AgieCharmilles AC Progress VP2
AgieCharmilles AC Progress VP2
AgieCharmilles AC Progress VP3
GF Machining Solutions Ready for delivery11 The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
Reference No. M151#106 New machine
X, Y, Z travel (w,d,h): 500 x 350 x 426 mm
Max workpiece dimensions (w,d,h): 1050 x 650 x 420 mm
Wire Diameters 0.15 mm - 0.33 mm
Roughness (Ra): 0.1 µm
Smart Options: 3D Setup
Machine location: Factory Stock (CH)
Available from: September 2017
Warranty: 12 months
Reference No. M151#105 New machine
X, Y, Z travel (w,d,h): 350 x 250 x 256 mm
Max workpiece dimensions (w,d,h): 750 x 550 x 250 mm
Wire Diameters 0.15 mm - 0.33 mm
Roughness (Ra): 0.1 µm
Smart Options: 3D Setup
Machine location: Factory Stock (CH)
Available from: September 2017
Warranty: 12 months
Reference No. M151#104 New machine
X, Y, Z travel (w,d,h): 350 x 250 x 256 mm
Max workpiece dimensions (w,d,h): 750 x 550 x 250 mm
Wire Diameters 0.15 mm - 0.33 mm
Roughness (Ra): 0.1 µm
Smart Options: 3D Setup
Machine location: Factory Stock (CH)
Available from: September 2017
Warranty: 12 months
Reference No. M151#107 New machine
X, Y, Z travel (w,d,h): 500 x 350 x 426 mm
Max workpiece dimensions (w,d,h): 1050 x 650 x 420 mm
Wire Diameters 0.15 mm - 0.33 mm
Roughness (Ra): 0.1 µm
Smart Options: 3D Setup
Machine location: Factory Stock (CH)
Available from: September 2017
Warranty: 12 months
AgieCharmilles CUT P 1250
AgieCharmilles CUT E 350
AgieCharmilles CUT 2000 S
AgieCharmilles CUT 3000 S
The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
GF Machining Solutions Ready for delivery12
Reference No. M151#110 New machine
X, Y, Z travel (w,d,h): 1250 x 850 x 800 mm
Max workpiece dimensions (w,d,h): 2300 x 1300 x 800 mm
Wire Diameters 0.15 mm - 0.33 mm
Roughness (Ra): 0.1 µm
Smart Options: No
Machine location: Factory Stock (CH)
Available from: September 2017
Warranty: 12 months
Reference No. M105#4347 Demo machine
X, Y, Z travel (w,d,h):: 350 x 250 x 250 mm
Max workpiece dimensions (w,d,h): 820 x 680 x 250 mm
Wire Diameters 0.15 mm – 0.30 mm
Roughness (Ra): 0,18 µm
Smart Options: No
Machine location: UK
Available from: Immediately
Warranty: 12 months
Year of manufacture: 2016
Cutting hours: 528
Reference No. M151#108 New machine
X, Y, Z travel (w,d,h): 350 x 250 x 256 mm
Max workpiece dimensions (w,d,h): 750 x 550 x 250 mm
Wire Diameters 0.10 mm - 0.33 mm
Roughness (Ra): 0.07 µm
Smart Options: 3D Setup
Machine location: Factory Stock (CH)
Available from: October 2017
Warranty: 12 months
Reference No. M151#109 New machine
X, Y, Z travel (w,d,h): 500 x 350 x 256 mm
Max workpiece dimensions (w,d,h): 1050 x 650 x 250 mm
Wire Diameters 0.10 mm - 0.33 mm
Roughness (Ra): 0.07 µm
Smart Options: 3D Setup
Machine location: Factory Stock (CH)
Available from: October 2017
Warranty: 12 months
Special
OfferingrConnect
Special
OfferingrConnect
Wire-cutting EDM
DEPARTURES
AgieCharmilles CUT E 600
AgieCharmilles CUT 20 P
AgieCharmilles CUT E 350
AgieCharmilles CUT 300 mS
GF Machining Solutions Ready for delivery13 The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
Reference No. M105#111 Demo machine
X, Y, Z travel (w,d,h): 600 x 400 x 350 mm
Max workpiece dimensions (w,d,h): 1030 x 800 x 350 mm
Wire Diameters 0.15 – 0.30 mm
Roughness (Ra): 0.18 µm
Smart Options: No
Machine location: UK
Available from: Immediately
Warranty: 12 months
Year of manufacture: 2016
Cutting hours: 220
Reference No. M105#112 Used machine
X, Y, Z travel (w,d,h): 350 x 250 x 250 mm
Max workpiece dimensions (w,d,h): 820 x 680 x 250 mm
Wire Diameters 0.15 mm – 0.30 mm
Roughness (Ra): 0.25 µm
Smart Options: No
Machine location: UK
Available from: Immediately
Warranty: 6 months
Year of manufacture: 2008
Reference No. M107#4317 Used retrofitted machine
X, Y, Z travel (w,d,h): 350 x 250 x 250 mm
Max workpiece dimensions (w,d,h): 820 x 680 x 250 mm
Wire Diameters 0.15 mm – 0.30 mm
Roughness (Ra): 0,18 µm
Smart Options: No
Machine location: Italy
Available from: Immediately
Warranty: 6 months
Reference No. M107#4315 Used machine
X, Y, Z travel (w,d,h): 550 x 350 x 400 mm
Max workpiece dimensions (w,d,h): 1200 x 700 x 400 mm
Wire Diameters 0.15 mm – 0.33 mm
Roughness (Ra): 0.2 µm
Smart Options: Kit 25 kg - Taper expert
Machine location: Italy
Available from: Immediately
Warranty: 6 months
Year of manufacture: 2013
AgieCharmilles CUT 200 mS
AgieCharmilles CUT 3000 S
AgieCharmilles FORM 20
AgieCharmilles FORM P 350
The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
GF Machining Solutions Ready for delivery14
Reference No. M123#4297 Used refurbished machine
X, Y, Z travel (w,d,h): 350 x 250 x 250 mm
Roughness (Ra):: 0.1 µm
Max electrode weight: 50 kg
Max workpiece weight: 200 kg
Smart Options: LTC 4 pos., C-Axis, chiller unit
Machine location: Poland (FS-CH)
Available from: Immediately
Warranty: 6 months
Year of manufacture: 2016
Worked hours: 597
Reference No. M192#4401 Demo machine
X, Y, Z travel (w,d,h): 350 x 250 x 300 mm
Roughness (Ra):: 0.08 µm
Max electrode weight: 50 kg
Max workpiece weight: 500 kg
Smart Options:S3R Macro chuck, C-axis, 3DS, OMS, Wear Partitioning, Automation kit
Machine location: Germany
Available from: End of September
Warranty: 24 months
Reference No. M125#114 Demo machine
X, Y, Z travel (w,d,h): 350 x 220 x 220 mm
Max workpiece dimensions (w,d,h): 1000 x 550 x 220 mm
Wire Diameters 0.15 mm – 0.33 mm
Roughness (Ra): 0.1 μm
Smart Options:3D Setup / Automatic leveling of the workpiece
Machine location: Brazil
Available from: Immediately
Warranty: TBC
Year of manufacture: 2012
Die-sinking EDM
Reference No. M103#4271 Demo machine
X, Y, Z travel (w,d,h): 500 x 350 x 256 mm
Max workpiece dimensions (w,d,h): 1050 x 650 x 250 mm
Wire Diameters 0.1 mm
Roughness (Ra): 0.08 µm
Smart Options: 3D Setup, Conic Plus, Hostcontrol
Machine location: France
Available from: Immediately
Warranty: 6 months
Special
OfferingrConnect
Wire-cutting EDM
DEPARTURES
AgieCharmilles FORM S 350
AgieCharmilles FORM 20
AgieCharmilles FORM P 350
AgieCharmilles FORM 30
GF Machining Solutions Ready for delivery15 The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
Reference No. M162#203 Demo machine
X, Y, Z travel (w,d,h): 350 x 250 x 300 mm
Roughness (Ra): 0.08 µm
Max electrode weight: 50 kg
Max workpiece weight: 500 kg
Smart Options:C-axis ACCURA, 3DS, Wear partitioning, Smart tool, Automation kit
Machine location: Switzerland
Available from: End of October
Warranty: 12 months
Year of manufacture: 2017
Reference No. M162#4367 Demo machine
X, Y, Z travel (w,d,h): 350 x 250 x 250 mm
Roughness (Ra): 0.1 µm
Max electrode weight: 50 kg
Max workpiece weight: 200 kg
Smart Options: Fine Drill, LTC4, Wear partitioning
Machine location: Switzerland
Available from: End of November
Warranty: 12 months
Year of manufacture: 2016
Reference No. M151#204 New machine
X, Y, Z travel (w,d,h): 350 x 250 x 300 mm
Roughness (Ra):: 0.08 µm
Max electrode weight: 50 kg
Max workpiece weight: 500 kg
Smart Options: LTC / RTC
Machine location: Factory Stock (CH)
Available from: October 2017
Warranty: 12 months
Reference No. M162#202 New machine
X, Y, Z travel (w,d,h): 600 x 400 x 400 mm
Roughness (Ra):: 0.1 µm
Max electrode weight: 100 kg
Max workpiece weight: 1000 kg
Smart Options: No
Machine location: Switzerland
Available from: Immediately
Warranty: 12 months
Year of manufacture: 2014
AgieCharmillesFORM 3000 VHP
AgieCharmilles FORM S 350
AgieCharmilles FORM P 600
AgieCharmilles FORM 30
The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
GF Machining Solutions Ready for delivery16
Reference No. M103#4272 Used machine
X, Y, Z travel (w,d,h): 1200 x 800 x 350 mm
Roughness (Ra):: 0.08 µm
Max electrode weight: 2000 kg
Max workpiece weight: 50 kg
Smart Options: No
Machine location: France
Available from: Immediately
Warranty: 6 months
Reference No. M151#205 New machine
X, Y, Z travel (w,d,h): 350 x 250 x 300 mm
Roughness (Ra): 0.08 µm
Max electrode weight: 50 kg
Max workpiece weight: 500 kg
Smart Options: LTC / RTC
Machine location: Factory Stock (CH)
Available from: October 2017
Warranty: 12 months
Reference No. M151#206 New machine
X, Y, Z travel (w,d,h): 600 x 400 x 450 mm
Roughness (Ra): 0.08 µm
Max electrode weight: 50 kg
Max workpiece weight: 1600 kg
Smart Options: LTC / RTC
Machine location: Factory Stock (CH)
Available from: October 2017
Warranty: 12 months
Reference No. M105#207 Used machine
X, Y, Z travel (w,d,h): 600 x 400 x 400 mm
Roughness (Ra):: 0.1 µm
Max electrode weight: 25 kg
Max workpiece weight: 1000 kg
Smart Options: C-axis - 6 position linear toolchanger
Machine location: UK
Available from: Immediately
Warranty: 6 months
Year of manufacture: 2010
Die-sinking EDM
DEPARTURES
AgieCharmilles DRILL 300
AgieCharmilles DRILL 20
AgieCharmilles LASER P 600 U
AgieCharmilles LASER P 1000 U
GF Machining Solutions Ready for delivery17 The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
Reference No. M101#501 New machine
X, Y, Z travel (w,d,h): 580 x 405 x 825 mm
Nr. of axes: 5
Max. workpiece weight (5-axis): 75 kg
Laser source, to be selected : 30 watts Fp or 50 watts
Focal lenses, to be selected : F254 or F160
Smart Options: No
Machine location: Factory Stock (RTM)
Available from: End of October 2017
Warranty: 12 months
Laser
Reference No. M105#301 Demo machine
X, Y, Z travel (w,d,h): 600 x 400 x 450 mm
Electrode diameter: 0.3 mm - 3.0 mm
Electrods change: 16/4-15/8
Max workpiece weight: 1000 kg
Smart Options: No
Machine location: UK
Available from: Immediately
Warranty: 6 months
Year of manufacture: 2015
Hole-drilling EDM
Reference No. M123#4393 Demo machine
X, Y, Z travel (w,d,h): 300 x 200 x 300 mm
Electrode diameter: 0,3 mm - 3,0 mm
Electrodes change: No
Max workpiece weight: 300 kg
Smart Options: Water filtration & deionization unit
Machine location: Poland
Available from: Immediately
Warranty: 12 months
Year of manufacture: 2017
Reference No. M101#4277 New machine
X, Y, Z travel (w,d,h): 995 x 550 x 845 mm
Nr. of axes: 5
Max. workpiece weight (5-axis): 150 kg
Laser source, to be selected : 30 watts Fp or 50 watts or 100 watts
Focal lenses, to be selected : F254 or F160
Smart Options: No
Machine location: Factory Stock (RTM)
Available from: End of October 2017
Warranty: 12 months
AgieCharmilles LASER 600
AgieCharmilles LASER P 400 U
AgieCharmilles LASER P 400
AgieCharmilles LASER P 400 U
The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
GF Machining Solutions Ready for delivery18
Reference No. M101#505 Demo machine
X, Y, Z travel (w,d,h): 580 x 405 x 825 mm
Nr. of axes: 5
Max. workpiece weight (5-axis): 75 kg
Focal lenses, to be selected : F160
Smart Options: Laser source 30 watts Flexipulse
Machine location: UK
Available from: End of November 2017
Warranty: 12 months
Reference No. M101#502 New machine
X, Y, Z travel (w,d,h): 600 x 400 x 300 mm
Nr. of axes: 5
Max. workpiece weight (5-axis): 4 kg
Laser source, to be selected :30 watts Fp or 50 watts or/and Femto 20 watts
Focal lenses, to be selected : F160 or F100
Smart Options:340.12/77 - Pack evolution to DUAL Lasers (fiber + non fiber)
Machine location: Factory Stock (RTM)
Available from: End of October 2017
Warranty: 12 months
Reference No. M101#503 New machine
X, Y, Z travel (w,d,h): 600 x 400 x 300 mm
Nr. of axes: 3
Max. workpiece weight (5-axis): 50 kg
Laser source, to be selected : 30 watts Fp or 50 watts
Focal lenses, to be selected : F160 or F100
Smart Options: No
Machine location: Factory Stock (RTM)
Available from: End of October 2017
Warranty: 12 months
Reference No. M101#504 Used machine
X, Y, Z travel (w,d,h): 600 x 400 x 300 mm
Nr. of axes: 5
Max. workpiece weight (5-axis): 4 kg
Laser source, to be selected : 30 watts and Femto 20 watts
Focal lenses, to be selected : F160 or F100
Smart Options: No
Machine location: Factory Stock (CH)
Available from: End of December 2017
Warranty: 12 months
Year of manufacture: 2015
Laser
DEPARTURES
GF Machining Solutions Ready for delivery19 The machines indicated in this campaign are available subject to prior sale. Technical specifications and images are not binding and maybe modified without notice. Delivery till the end of December 2017 is possible only with order to GF Machining Solutions within the week 50-2017. This special action is valid until 31 December 2017. Our General Terms and Conditions apply.
rConnect activation kit
Open up new digital services possibilities for your existing GF Machining Solution machine.
Thanks to the rConnect activation kit, you can stay connected with your production environment anywhere and at any time. Through innovative digital services, rConnect allows you to monitor your productivity and to improve your machine availability.
Your benefits:• rConnect keeps you connected to modular digital services,
at any time and wherever you are• Greater revenue through higher level of availability and
reduced downtime• Cost reductions through optimization of service visits• Secure connection based on the latest technology, certified
by TÜViT• A significant step in the direction of smart services to
increase your efficiency
SMARTwire
Special
Offering
SMART wireSignificantly improved serviceability, traceability and quality control are among wire-cutting electrical discharge machining (WEDM) process improvements, provided by the intelligence of SMART wire for GF Machining Solutions AgieCharmilles CUT P series.
• Ensure consistent quality with detection of wire characteristics• Minimize human errors with automatic detection of wire• Process continuity assurance with detection of remaining wire length• Stock and process traceability• Process optimisation and part cost calculation
Available only where indicated by icon
Special
OfferingrConnect
GF Machining Solutions
GF Machining Solutions GmbHSteinbeisstraße 22-24
73614 Schorndorf
Deutschland
+49 (0) 7181 926 0
+49 (0) 7181 926 190
www.gfms.com/de
GF Machining Solutions SpAVia Monte Nevoso 2
20095 Cusano Milanino
Italy
+39 02 66 42 61
+39 02 66 42 63 20
www.gfms.com/it
GF Machining Solutions SAS12 Avenue du 1er Mai
91127 Palaiseau Cedex
France
+33 (0)1 69 31 69 00
+33 (0)1 69 31 69 67
www.gfms.com/fr
GF Machining Solutions LtdNorth View
CV2 2SJ Coventry West Midlands
United Kingdom
+44 (0) 247 653 8666
+44 (0) 247 653 0023
www.gfms.com/uk
GF Machining Solutions International SAVia dei Pioppi 2
6616 Losone
Switzerland
+41 (0) 91 806 90 30
+41 (0) 91 806 90 33
www.gfms.com/ch
GF Machining Solutions International SABranch Office Austria
Hammerstrasse 17
4453 Trattenbach
Österreich
+43 (0) 2 782 800 30 08
www.gfms.com/at
GF Machining Solutions International SABranch Office Benelux
Spikweien 21
5943 AC Lomm
Nederland
+31 (0) 77 473 82 00
+31 (0) 77 473 21 75
www.gfms.com/nl
GF Machining Solutions Máquinas LtdaRua Dr. Geraldo Campos Moreira, 240
Conjunto 32 Ed. River Park
04571-904 Brooklin - São Paulo
Brazil
+55 (0) 11 56 94 83 22
GF Machining Solutions S.A.U.Riera de Fonollar 41-A
08830 Sant Boi de Llobregat,
Barcelona
España
+34 (0) 93 652 95 50
+34 (0) 93 652 56 74
www.gfms.com/es
GF Machining Solutions s.r.o.Podolí 488
664 03 Podolí
Česká republika
+42 (0) 511 120 200
+42 (0) 511 120 201
www.gfms.com/cz
GF Machining Solutions Sp. z o.o.Aleja Krakowska 81 Sękocin Nowy
05-090 Raszyn / Warszawa
Polska
+48 (0) 22 326 50 50
+48 (0) 22 326 50 99
www.gfms.com/pl
GF İmalat Çözümleri Ticaret Ltd. Şti.IMES Sanayi Sitesi, E Blok
503 Sokak, No. 1
34775 Istanbul
Turkey
+90 216 466 4367 (GFMS)
+90 216 420 36 39
Your contact
© G
F M
achi
ning
Sol
utio
ns M
anag
emen
t SA
, 201
7
The
tech
nica
l dat
a an
d ill
ustr
atio
ns a
re n
ot b
indi
ng.
They
are
not
war
rant
ed c
hara
cter
istic
s an
d ar
e
subj
ect t
o ch
ange
.