Timers Overview

1088 Process Control

FUJI multi-mode timers with full featuresOperation mode selector

Operation mode indication window

Power on indication (Green)

Output indication (Red)

Time unit indication window

Time unit selectorTiming rangeselector

TIMERS FOR ALL APPLICATIONSAutomationDirect now offers solid-state timers

brought to you by two leaders in the industry,FUJI and Koyo.

FUJI Electric has been in businesssince 1923 and has been sellingtimers in the U.S. since 1970.All FUJI products are producedunder ISO9001 and ISO14000criteria. Koyo has been sellingtimers for over 30 years. Alltimers meet UL and CEconformity. Whether you need aminiature DIN timer, a 1/16DIN timer, or a full-blown 1/16

DIN digital timer, and whether you need totime in seconds or hours, AutomationDirect can supply a

timer that fits your needs.

Miniature DIN timers are smalland accurate

Small size: Measuring under one inch wide, these timers will saveyou much needed room in your enclosure. DIN rail mountingmakes for easy installation.

Easy operation: A simple dial allows easy setup for the operator. Withthe indicating LEDs, an operator can easily check for proper operation.

Accuracy: The timer will perform its timing function, over and overagain, with repeatable accuracy of +/- 1% of the setting.

FUJI multi-mode timers feature:

Ease of use: How many times have youhad to perform a math test just todetermine your time range? In our unit,as the time range is adjusted, the corre-sponding display changes. This featuremakes it very easy for the operator to setand read.

Full functionality: Up to four outputmodes can be selected simply with theturn of a screw. All outputs contain 5A,DPDT relays. This power allows you tominimize your inventory and maximizeyour flexibility.

LED indicators: Simply by looking atthe face panel, you can tell if the timer isworking properly.

Startup ease: When the dial is set tozero, the output turns on automatically.This feature allows for quick trou-bleshooting.

Timer Selection Guide

DisplayManual dialTime settingOutput LED indicator

Input Power

Inputs

Outputs

Contact Rating

Output Modes

Time RangesEnclosure RatingAgency Approvals

100-120 VAC

Timed signal

Normally-open DPDTNormally-closed DPDT

3A @ 220VAC

On-delay

0.4 seconds to 60 minutes

Price

UL/CSA/CE/TUV

NEMA 1

Manual dialTime settingPower LED indicatorOutput LED indicatorOutput mode setting

100-240 VAC

Reset signalStart signalGate signalTimed signal

Normally-open DPDTNormally-closed DPDT

5A @ 250VAC

On-delayFlickerOne shotOff-delay

0.05 seconds to 60 hours

NEMA 1

UL/CSA/CE/TUV

4-digit green LED display for time setting4-Digit red LED display for current timeOutput LED indicatorProgramming indicators

85-260VAC — 10-26 VDC

Start signalReset signalTimed signal

Normally-open SPSTNormally-closed SPSTDC NPN transistor

Mechanical: 2A @ 220VACTransistor: 100mA @ 24VDC

On-delayFlickerOne shotOff-delay

0.001 seconds to 999.9 hours

IP65 - faceplate

UL/CSA/CE

1089Process Control

Timers Overview

Koyo digital timers: powerful but easy to useThis full-function timer has all the bells and whistles, including full programmability:

Timing ranges and modes: Seconds to hours time ranges with decimal selection meet the widest range of timing requirements. Up anddown timing modes accomodate the user’s operation pref-erence.

Output modes: Five output modes, from on-delay to one-shot, use a reliable 2A relay to operate the controlleddevice.

Tamper-proof: Key protection can be set for individualkeys to prevent unintentional changes by the operator.

Output LED(red)

ProtectionLED (red)

Current valueLED (red)

Set valueLED (red)

Preset valueLED (green)

Digit keysRST key

ApplicationsTimers are used to perform a repeatable and predictablesequence of events. They can stand alone and control devicesbased on the timer setting and other operator selections, orthey can receive commands remotely from other devices suchas PLCs. Examples of time-based applications include anautomated car wash sequence, a batch operation that addsand mixes ingredients based on time periods, or a paintprocess that uses the position of an object for a start signal,then operates a paint sprayer for a set time length.

check check check

PROCESS

Fuji 1/16 DIN Super Timers Overview

1090 Process Control

FUJI 1/16 DIN SUPER TIMERSOverviewThe MS4S series super timers are a 1/16DIN style timing relay designed forprocess control, machine tool control,safety control and many other types ofapplications. The timers are plug-in 8-pin or 11-pin surface/DIN rail mount-able with up to four selectable modes ofoperation and four selectable timingranges.

FeaturesMS4SM• Multi-mode timer with mode indica-

tion. On-delay (PO), flicker (FL),one-shot (OS), or signal off-delay (SF)

• 11-pin plug-in with start, reset and gate(interrupt) input signals and a DPDTcontact output.

• Timing range from 0.05 seconds to 60hours

• Timer scale with selectable ranges of 0-6, 0-12, 0-30 and 0-60

• Timing units in selectable ranges of0.1s, sec, min and hrs

• LED indicators. Power on (green)flickers during timing operation UP(red) on when N.O. contact is closed

MS4SA• On-delay timer

• 8-pin plug-in with a DPDT contactoutput

• Timing range from 0.05 seconds to 60hours

• Timer scale with selectable ranges of 0-6, 0-12, 0-30 and 0-60

• Timing units in selectable ranges of0.1s, sec, min and hrs

• LED indicators — power on (green)flickers during timing operation. UP(red) on when N.O. contact is closed

MS4SC• On-delay timer

• 8-pin plug-in with a SPDT timedcontact output and a SPDT instanta-neous contact output

• Timing range from 0.05 seconds to 60hours

• Timer scale with selectable ranges of 0-6, 0-12, 0-30 and 0-60

• Timing units in selectable ranges of0.1s, sec, min and hrs

• LED indicators — power on (green)flickers during timing operation. UP(red) on when N.O. contact is closed

Product Selection Guide

Part Number Voltage Time Range Price

MS4SM-AP-ADC

MS4SA-AP-ADC

MS4SC-AP-ADC

100-240VAC 0.05 seconds to 60 hours

0.05 seconds to 60 hours

0.05 seconds to 60 hours

100-240VAC

100-240VAC

check

check

check

Description

Multi-mode timer with selectable timing range from 0.05s to 60 hours. Input power is 100 - 240 VAC. DPDTrelay output. 11-pin connection. UL, CSA , TÜV approved

On-delay timer with selectable timing range from 0.05s to 60 hours. Input power is 100 - 240 VAC. DPDT relayoutput. 8-pin connection. UL, CSA, TÜV approved

On-delay timer with selectable timing range from 0.05s to 60 hours. Input power is 100 - 240 VAC. SPDT timedrelay output and SPDT instantaneous relay output. 8-pin connection. UL, CSA, TÜV approved

TP411X

Socket for MS4SA and MS4SC series timers. UL, CSA, TÜV approvedTP48X

Socket for MS4SM series timers. UL, CSA, TÜV approved check

check

N/A

N/A

N/A

N/A

C

N.C.

N.O. N.C .

N.C.

N.OC

C N.O.

N.C.

A single pole, double throw relayswitches one common line betweentwo stationary contacts, one normallyopen and one normally closed.

A double pole, double throw relay simul-taneously switches two independentcommons with two independentnormally open/normally closed contacts.

SPDT DPDT

AccessoriesPart Number PricePANEL-16 check

DescriptionMounting clip for 1/16th DIN timers and temperature/process controllers. 5 clips per package

1091Process Control

Fuji 1/16 DIN Super Timers Specifications

PROCESS

FUJI 1/16 DIN SUPER TIMERS

Specifications

Repeat Accuracy ±0.3% at maximum setting time

Reset TimeOperating Voltage RangeOperating Temperature RangeHumidityContact RatingsPower ConsumptionInsulation Resistance

Dielectric Strength

Vibration

Shock

Life Expectancy

Weight

Approvals UL file no.: E44592, CSA file no.: LR20479, TÜV license no: R9551800

0.1 second or less

85 - 264VAC

-10 to +55°C (14 to 131°F) (no icing)

35 to 85% (no condensation)

5A at 30VDC resistive load, 1A @ 30VDC inductive load, 5A @ 120VAC resistive load, 2.5A @ 120VAC inductive load

Approx. 10VA at120/240VAC

100M� at 500 VDC insulation tested

2000VAC 1 min. between current carrying part and non-current carrying part2000VAC 1 min. between output contact and control circuit1000VAC 1 min. between open contacts

Malfunction durability: 10 to 55Hz, 0.5mm double amplitudeMechanical durability: 10 to 55Hz, 0.75mm double amplitude

Malfunction durability: 100m/s2

Mechanical durability: 500m/s2

Mechanical: 20 million operationsElectrical: 100,000 operations at 250VAC 5A resistive load

Approx. 100g (3.527 oz.)

MS4SM-AP-ADC

TP411XTP48X

MS4SA-AP-ADCMS4SC-AP-ADC

Fuji 1/16 DIN Super Timers Specifications

1092 Process Control

Timing and wiring diagrams Timing and wiring diagramsMS4SMMS4SM

1. On-delay PO

With power off turn the mode selector until PO is displayed.When power is on, applying the start signal turns thetimed N.O. normally open) contact on after the set timehas elapsed.

� When using a power-on start, pins 2 and 6 (start signal) mustbe jumpered together

2. Flicker FL

� With power off, turn the mode selector until FL is displayed.When power is on, applying the start signal turns thetimed contact on and off repeatedly at the set timeintervals.

3. One-shot OS

With power off, turn the mode selector until OS is displayed.When power is on, applying the start signal instantlyturns the timed N.O. contact on and turns it off after the settime has elapsed.

4. Signal off-delay SF

With power off, turn the mode selector until SF is displayed.When power is on, applying the start signal instantlyturns the timed N.O. contact on. Removing the start signalturns the contact off after the set time has elapsed.

MS4SAMS4SA On-delay

When power is applied, the timed N.O. contacts make afterthe set time has elapsed.When power is removed, the contacts reset.

MS4SCMS4SC On-delay

Timed contactWhen power is applied, the N.O. contact makes after theset time has elapsed. When power is removed, thecontacts reset.Instantaneous contactWhen power is applied, the N.O. contact makes instantly.When power is removed, the contacts reset.

N

Signal start Power on start

Power 2-10

Start signal 2-6

Reset signal 2-7

Indicator POWER

Indicator OUTPUT

Timed NC 1-411-8

Timed NO 1-311-9

T T T

T T T TT-a

Power 2-10

Start signal 2-6

Reset signal 2-7

Indicator POWER

Indicator OUTPUT

Timed NC 1-411-8

Timed NO 1-311-9

T TT-a T-a

Power 2-10

Start signal 2-6

Reset signal 2-7

Indicator POWER

Indicator OUTPUT

Timed NC 1-411-8

Timed NO 1-311-9

TT-a T-aT-a

Power 2-10

Start signal 2-6

Reset signal 2-7

Indicator POWER

Indicator OUTPUT

Timed NC 1-411-8

Timed NO 1-311-9

2-7

T1-38-6

1-48-5

Power

Timed NO

Timed NC

Power

(Ð) (+)

5

6

4

3

2

1 8

7

NC NC

NO NO

COM COM

2-7T

8-6

8-5

1-3

1-4

Power

Timed NO

Timed NC

Inst. NO

Inst. NC Power

(Ð) (+)

5

6

4

3

2

1 8

7

NC NC

NO NO

COM COM

56

4

3

21 11

10

9

8

7

Power

) (+)

Resetsignal

Startsignal

Gatesignal

�

��

��

�

�

�

�

��

Notes: 1. T= set time. t = time period within set time. 2. The gate signal is used to interrupt the timing operation.

( -

FUJI 1/16 DIN TIMERS TIMING AND WIRING DIAGRAMS

All dimensions in mm

MS4SM MS4SA and MS4SC

Socket for MS4SM (11-pin)TP411X

Wt : Approx. 100g (3.53oz)

Socket for MS4SA, MS4SC (8-pin)TP48X

Wt: Approx. 70g (2.47oz)

Wt: Approx. 50g (1.76oz)

48

48

48 15 66.5

6 52.3 14.2

39 44.5

507.8 4

70

91011 1 2

3

458 7

35.4

31.2 or less

5.5

TerminalM3.5x818.8

38.4 24.5

Mounting hole 2 - Diam. 4.5

40 0.2

507.8 4

70

7 8 1 2

46 5

TerminalM3.5x8

35.4

Mounting hole 2- Diam. 4.5

20.3 or less

5.5

40 0.2

3

18.838.4 14

2-Diam 4.5

2-Diam 4.5

Side View

6

1093Process Control

Fuji 1/16 DIN Super Timers Specifications

PROCESS

Selection of operation mode/MS4SM Selection of timing range and time units

Connection of power supply

Power ON indicator (Green)

Time unit selector

Time unit indication window

Output indicator (Red)

Operation mode indication window

Operation modeselector

Timing rangeselector

Using the super timer

FUJI 1/16 DIN SUPER TIMERS DIMENSIONS

Dimensions in mm

Fuji Miniature DIN Super Timers Overview

1094 Process Control

Product Selection Guide

Part Number Voltage Time Range PriceDescription

ST7P-2A15S-ADC

ST7P-2A13T-ADC

ST7P-2A16T-ADC

ST7P-2A11N-ADC

ST7P-2A16N-ADC

TP88X2

Mini-DIN on-delay timer with timing range of 0.4s to 5s. Input power is 100-120 VAC.DPDT relay output. UL, CSA, TÜV approved 100-120VAC 0.4 seconds to 5 seconds

Mini-DIN on-delay timer with timing range of 2s to 30s. Input power is 100-120 VAC. DPDT relay output.UL, CSA, TÜV approved 100-120VAC 2 seconds to 30 seconds

Mini-DIN on-delay timer with timing range of 4s to 60s. Input power is 100-120 VAC. DPDT relay output. UL, CSA, TÜV approved 100-120VAC 4 seconds to 60 seconds

Mini-DIN on-delay timer with timing range of 1 min. to 10 min. Input power is 100-120 VAC. DPDT relay output.UL, CSA, TÜV approved 100-120VAC 1 minute to 10 minutes

Mini-DIN on-delay timer with timing range of 4 min. to 60 min. Input power is 100-120 VAC. DPDT relay output.UL, CSA, TÜV approved 100-120VAC 4 minutes to 60 minutes

Socket for ST7P series timers. UL, CSA, TÜV approved

check

check

check

check

check

checkN/A N/A

FUJI MINIATURE DIN SUPER TIMERSOverviewThe ST7P is a compact and highly accu-rate timer. It is an on-delay operationtype with a single timing range. Thesetimers are designed to optimizemounting space in small areas.Mounting is by DIN rail or by securingdirectly to a panel with a fastener.

Features• These super timers are highly accurate,

with a repeat accuracy within ±1% atmaximum setting time.

• ST7P models offer a number of timingranges. Please see Selection Guidebelow.

• The large dial makes time setting easy.

• The LED indicators make it easy tomonitor timer operation.

• The ST7P series meets UL and CSAstandards.

ST7P Miniature Super Timer with TP88X2 Socket

AccessoriesPart Number PricePANEL-16 check

DescriptionMounting clip for 1/16th DIN timers and temperature/process controllers. 5 clips per package

1095Process Control

Fuji Miniature DIN Super Timers Specifications

PROCESS

FUJI MINIATURE DIN SUPER TIMER SPECIFICATIONSSpecifications

Repeat Accuracy ±01% at maximum setting time

Reset Time

Operating Voltage RangeOperating Temperature RangeHumidityContact RatingsPower ConsumptionInsulation Resistance

Dielectric Strength

Vibration

Shock

Life Expectancy

Weight

Approvals UL file no.: Body - E44592, Socket - E90265; CSA file no.: LR20479; TÜV license no: R9551799

0.1 second or less

0.85 to 1.1 times rated input voltage

-10 to +50°C (14 to 122°F)

35 to 85% (no condensation)

3A @ 120VAC resistive load, 1A @120VAC inductive load; 3A @ 30VDC resistive load, 0.5A @ 30VDC inductive load

Approx. 1.2VA at 100VAC, approx. 1.5VA at 200VAC, 1.1W at 24VDC.

100M� at 500VDC insulation tested

2000VAC 1 min. between current carrying part and non-current carrying part1500VAC 1 min. between output contact and control circuit1000VAC 1 min. between open contacts

Malfunction durability: 10 to 55Hz, 0.5mm double amplitudeMechanical durability: 10 to 55Hz, 0.7mm double amplitude

Malfunction durability: 50m/s2

Mechanical durability: 1000m/s2

Mechanical: 50 million operationsElectrical: 500,000 operations at 220VAC 3A resistive load (ST7P-2)

36.288g (1.28 oz.)

Maximum Operating Cycle 1800 cycles/hour

Surge Voltage* 3000 Volts

*Note: If surge voltage exceeds 3000V, use surge suppressors.

tTimed NO (9-5)(12-8)

Timed NC (9-1)(12-4)

Power (13-14)

1

5

9

13

4

8

12

14(- ) )

INPUT

UP

ON

X1 X10

18.5

4 52.6 1.8

5.7 2.2

0.5

9

5

1

12

8

4

13 14

27.8

21

Sockets/Screw terminal and rail mountingSockets/Screw terminal and rail mounting

69

4 1

8 5

12 9

14 13

32.4

Terminal M3.5x8

6.8

Approx.96.5 (TH35-15)Approx.989 (TH35-7.5)Approx.956.5 29

22.610.5

10.6

59

24.5

342- 4 (M3, M4)

48

1412

15

139

(+

Fuji Miniature DIN Super Timers Specifications

1096 Process Control

FUJI MINIATURE DIN TIMERS TIMING AND WIRINGTiming diagram

Body ST7P

Body TP88X2 Panel drilling

Wiring diagram

TP88X2

Sockets/screw terminal and rail mounting

All dimensions in mm

1097Process Control

Koyo Digital Timers Overview

PROCESS

OverviewKoyo digital timers offer flexible featuresat a great price. A large, easy to readdisplay is offered in a small 1/16 DINsize. The large, bright red LED displayhas a 12mm character display heightwhich allows it to be seen easily from adistance and at an angle. In addition, setvalues use a green LED display to differ-entiate from timing values. Basic func-tion settings are made with digitalswitches. Detailed settings are selectedwith digital keys, so operation is easy.

Features• Tamper-proof: key protection can be

set for individual keys to prevent amalfunction or tampering.

• Battery-less memory retention:EEPROM is used to retain values inmemory, so there is no need for batterymaintenance.

• Maintenance has been reduced viaremovable terminals. After wiring, theterminal cover provides a safe barrierfor worry-free use.

• Power source for a large-capacitysensor: you can source the power forthe sensor from the built-in powersource which supplies 60mA at24VDC.

• Wide operating AC voltage range of85VAC-264VAC.

• Various types of time ranges: covers tentypes of time ranges with times of0.001 second to 9999 hours

• Five types of operating modes: settingsof on-delay, off-delay, one-shot, accu-mulation and flicker

• Display of elapsed time/remaining time

• IP65 protective structure: front coverpanel is made of a clear membrane, sooperation with wet or dirty hands canbe worry-free.

• Fully CE and UL compliant

Product Selection Guide

Part Number Source Voltage Time Range Price

KT-V4S-D

KT-V4S-C-D

100-240VAC0.001 second to 9999 hours

12-24VDC

check

check

Description

Digital timer with 10 types of time ranges (see specifications). Input power is100-240VAC. UL and CSA approved.

Digital timer with 10 types of time ranges (see specifications). Input power is12-24VDC. UL and CSA approved

Number of Digits

4

KT-V4S-D KT-V4S-C-D

KOYO DIGITAL TIMERS

AccessoriesPart Number PricePANEL-16 check

DescriptionMounting clip for 1/16th DIN timers and temperature/process controllers. 5 clips per package

Koyo Digital Timers Specifications

1098 Process Control

KOYO DIGITAL TIMERS SPECIFICATIONSGeneral Specifications

Source Voltage 12-24VDC

Permitted Power Fluctuation

Sensor Power

Memory Backup upon PowerFailureAmbient TemperatureStorage TemperatureAmbient Humidity

Withstand Voltage

Impact Resistance

Vibration Resistance

Noise Resistance

Protective Structure

Weight

Approvals

UL recognized only with Class II power supply;CSA: EN61010-1 and EMI: EN55-11, EMS:EN50082-2.If product has DC power supply, an EMI/EMCfilter must be installed on the power supply.

10-26.4VDC

N/A

DC power between terminals ± 1.0 kV(pulse width 1 µ s and rise time 1 ns)

Approx. 110 grams (3.88 oz.)

Power Consumption Approx. 4W

Power AC Power DC Power

UL listed, CSA listed

100-240VAC

85-264VAC

Approx. 11VAC

24VDC (20-28V) 60 mA (less than10%p-p ripple noise)

EEPROM writing up to 100,000 times; Memory duration: 10 years

-10-50°C (14 to 122°F)

-20-70°C (-4 to 158°F) (with no icing)

35-85% RH non-condensing

Approx. 150 grams (5.291 oz.)

2kVAC for one minute

Durability: Displacement amplitude 0.5mm 10-55 Hz along three axes Operating vibration: Displacement amplitude 0.35mm 10-55 Hz along three axes

Durability: 490 m/s2 along three axesOperating impact: 98 m/s2 along three axes

AC power between terminals ±1.5kV (pulse width 1µs and rise time1ns)

IP65 (front panel only)

TerminalsConforming wiring 0.25-1.65 mm2 24 to 16 gauge

Permitted Torque 0.5 Nm (.369 ft./lbs.)

Performance Specifications

Operational Format On-delay, off-delay, one-shot, accumulator, and flicker (with alarm output)

Number of Digits

Display

Time Range

DisplayTimer Precision

Input

Start Input ResponseExternal Reset

Output

Output Duration (flicker)Installation

Category Timer

4 digits

Current values: red LED, character height 12 mm; Preset value: green LED, characterheight: 7mm

0.001s-9.999s/0.01s-99.99s/0.1s-999.9 s/1s-9999 s/1 s-99 min 59 s/1 min-9999min/1 h-9999 h/1 min-99 h 59 min/0.1 min-999.9 min/0.1h-999.9 h

Elapsed time/remaining time

0.013% or ±15 ms (using large values)

Input logic: negative logic (no voltage input) positive logic (voltage input)

Less than 15 ms/5 ms/1 ms

Min. signal amplitude 5 ms

DC output: NPN open collector output/24V 100 mA. Withstand voltage 35V.Residual voltage less than 1.5V

10-9990 ms variable every 10 ms

1/16 DIN panel mount

Input resistance: positive logic 15 k�; negative logic 3.3 k� (AC power)/1.8 k�(DC power)

Input voltage: “L” 0-3V “H” 7-30V

Relay output: 1 SPDT 220VAC 2A (resistive load)

Part Number KT-V4S-D KT-V4S-C-D

48

63

48

Mounting frame

100 (AC power supply type)

60 (DC power supply type)

6

44.5

Panel thickness: 1 to 5

50 10

DC power supply type

AC power supply type

Depth dimension

66mm

106mm

Dimensions

Dimensions in mm

1099Process Control

Koyo Digital Timers Specifications

PROCESS

2 3 5DC output 1 7 Reset Input

8 9 10 11 12

KT-V4S

0V

COM N.C. N.O.

KT-V4S-C

1

3 5

7 Reset Input

8 9 10 11 12

0V

COM N.C. N.O. +Power In Power In

24VDC, 60mASensor supply

Start Input

Start Input

DC output

KOYO DIGITAL TIMERS TIMING AND WIRING DIAGRAMS

Note: Output duration is variable from 0-9990 ms. (Default: 100 ms)

When alarm settings are 0, the DCoutput is the same as the outputoperations for a relay output.

Note: Alarm settings should be less than preset values. Usingalarm settings with values that exceed preset values will resultin measurement values of 0 and the alarm output (DC output)will come ON.

On-delay Off-delay

One-shot Accumulation

Flicker

KT-V4S-D KT-V4S-C-D

185Product List

Product List: Process

NEW! Process Control ProductsProcess/Temperature Controllers

PM24-2000-AC E21 1083 Limit controller with 2 mechanical relays. Universal inputs include T/C, RTD, mA, mV, V. Operates on 90-260 VAC input power. Fully scaleable display.

TC33-2010-AC E41 1085 Temperature controller with 2 mechanical relays and one 4-20mA output. Inputs include T/C and RTD. Operates on 90-260 VAC input power. Autotune PIDcontrol.

PC35-2010-AC E1 1087 Process controller with 2 mechanical relays and one 4-20mA output. Universal inputs include T/C, RTD, mA, mV, V. Operates on 90-260 VAC input power.Autotune PID control with 49 segment Ramp/Soak profile.

PC35-0210-AC E2 1087 Process controller with 2 solid-state relays and one 4-20mA output.Universal inputs include T/C, RTD, mA, mV, V. Operates on 90-260 VAC input power. AutotunePID control with 49-segment ramp/soak profile.

PC35-2110-AC E3 1087 Process controller with 2 solid-state relays, one 4-20mA output and one pulse-width modulated output. Universal inputs include T/C, RTD, mA, mV, V. Operates on90-260 VAC input power. Autotune PID control with 49-segment ramp/soak profile.

PANEL-16 E61 1090 Mounting clip for 1/16th DIN timers and temperature/process controllers. 5 clips per package

FUJI Selectable Timers and AccessoriesMS4SM-AP-ADC F1 1090

Multi-mode timer with selectable timing range from 0.05 seconds to 60 hours, 100-240 VAC input power, DPDT relay outputMS4SA-AP-ADC F2 1090

On-delay timer with selectable timing range from 0.05 seconds to 60 hours, 100-240 VAC input power, DPDT relay outputMS4SC-AP-ADC F3 1090

On-delay timer with selectable timing range from 0.05 seconds to 60 hours, 100-240 VAC input power. SPDT timed relay output and SPDT instant relay output.ST7P-2A15S-ADC F4 1094

Mini-DIN on-delay timer with timing range of 0.4 seconds to 5 seconds, 100-120 VAC input power, DPDT relay outputST7P-2A13T-ADC F5 1094

Mini-DIN on-delay timer with timing range of 2 seconds to 30 seconds, 100-120 VAC input power, DPDT relay outputST7P-2A16T-ADC F6 1094

Mini-DIN on-delay timer with timing range of 4 seconds to 60 seconds, 100-120 VAC input power, DPDT relay outputST7P-2A11N-ADC F7 1094

Mini-DIN on-delay timer with timing range of 1 min. to 10 min., 100-120 VAC input power, DPDT relay outputST7P-2A16N-ADC F8 1094

Mini-DIN on-delay timer with timing range of 4 min. to 60 min., 100-120 VAC input power, DPDT relay outputTP411X F101 1090

Mounting Socket for MS4SM series timersTP48X F102 1090

Mounting Socket for MS4SA and MS4SC series timersTP88X2 F103 1094

Mounting Socket for ST7P series timersPANEL-16 E61 1090

Mounting clip for 1/16th DIN timers and temperature/process controllers. 5 clips per package

Koyo Programmable TimersKT-V4S-D K601 1097

Digital, dual preset, timer with fully selectable timing range. Dual line red/green LED display, 100-240 VAC input power. SSR and NPN outputs available. KT-V4S-C-D K602 1097

Digital, dual preset, timer with fully selectable timing range. Dual line red/green LED display, 10-30 VDC input power. SSR and NPN outputs available.

Part Number Speed Code Page