ImagineIMG-800-SIMG-850-SWith refined styling and a streamlined profile, the Imagine is packed with new design innovations. This banner stand is our most popular removable cassette roller system and has been specially designed for maximum convenience and ease of use.

dimensions:

literature pocketaccessory addition

features and benefits:

- Add your own branding using the slide in graphic channel along the front of the banner stand base

- Premium form molded EVA bag included- Graphic tensioner- Anti-slip strips along base- Lifetime warranty against manufacturer defects

- Variable height = 30.5” through 83.35”- Telescopic pole with premium grip rail- Intergraded pole strage for the twist & lock

telescoping pole- Accessory channel featured on top of unit (to add a literature pocket or arm table)

We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications.

10/24/2017

Ships in one box:800: 37”l x 12”h x 5”d940mm(l) x 305mm(h) x 127mm(d)Approximate shipping weight: 17 lb / 8 kg

850: 39”l x 12”h x 5”d991mm(l) x 305mm(h) x 127mm(d)Approximate shipping weight: 18 lb / 9 kg

Shipping

Graphic

Hardware

Assembled unit:800: 34.25”w x 87”h x 8.5”d870mm(w) x 2210mm(h) x 216mm(d)Approximate weight: 11 lb / 5 kg

850: 36.25”w x 87”h x 8.5”d920mm(w) x 2210mm(h) x 216mm(d)Approximate weight: 12 lb / 6 kg

Refer to related graphic template for more information.

Visit: www.exhibitors-handbook.com/graphic-templates

Graphic material:Anti-curl vinyl, premium opaque fabric, melinex

Graphic tension may be re-applied or added by turning the ratchet tensioner clock-wise.

Lumina 2 banner and LED Spot lighting option available

Stand-off literature rack is available (L112-2 only)

Stand-off rectangular table is available (AKIT-1S in black only)

additional information:

black

intergrated pole storage

Banner Stand Accessories:easy connection with cam lock and channel

Set-up

Secure pole(s) in the base of standTwist telescopic pole to extend 1 2 3 4Gently lean the unit back and pull the graphic up by the toprail

Graphic to top rail attachment (metal insert)

1 2 3 4

5

Leveling feet located under unit

Metal Insert

Metal Insert

Metal Insert

Peel film to expose adhesive; place metal insert from graphic rail on top back side of the graphic point

Loosen each screw from the rail using provided allen key and remove metal insert (do not remove screws)

Press down on the metal insert to make sure adhesive is secure on graphic

Insert the metal insert with graphic attached into the top graphic profile rail

Tighten the screws back in place to hold metal insert and graphic with an allen key 1

Quick slide top rail attachment (plastic insert)

2 3

top slider

printed side down

Remove top slider from graphic railRemove film to expose adhesive on top slider

Align and apply to top slider on the top front of graphic

3

74

8

5 6

Line the bottom of the back of graphic print with adhesive tape on white leader strip

Slowly retract the graphic back into the base

Once aligned pull adhesive tape slowly while applying pressure to graphic to adhere tape

Place interchangeable cartridge back into the outer cartridge with graphic retracted back in

Place additional masking tape to the back of the graphic for extra protection

Remove pin while holding onto the graphic so the graphic does not retract back in quickly

.

1Flip open the cassette door

Graphic to base attachment

2Carefully remove the cassette from the outer cartridge4Insert graphic onto graphic rail

top rail slider

graphic back

graphic front