IM - MR30 Mid Rise Lift Specifications: Overall width: 1890mm Overall Length: 2045mm Lowered Height:...

IM - MR30 Mid Rise Lift IM - MR30 Mid Rise Lift

Specifications:

Overall width: 1890mm Overall Length: 2045mm Lowered Height: 110mm Max Lifting Height: 1000mm Lifting Capacity: 2500kg Power Supply: 220v Adaptors: 45mm, 80mm and 100mm

BRANDED EQUIPMENT

IM-LR30 Low Level Lift IM-LR30 Low Level Lift

Specifications:

Overall width: 1842mm Overall Length: 2180mm Lowered Height: 95mm Max Lifting Height: 565mm Lifting Capacity: 2500kg Power Supply: 220v Motor Reservoir Capacity: 6 liters Adaptors: 45mm, 80mm and 100mm

BRANDED EQUIPMENT

Electro-Hydraulic 2 Post Lift – BaseElectro-Hydraulic 2 Post Lift – Base

Capacity 4500kgMaximum lifting height 1900mm without adaptorsMinimum lifting height 100mmOverall height 2925mmOverall width 3420 mmWidth between columns 2838 mmMaximum vehicle width 2580 mmLifting time 50 sLowering time 50 sCompressed air pressure 6 bar – 8 barNoise level 75 dB(A)/1mWorking temperature -10 °C ÷ 40 °CAverage weight of package 720kgElectric Motor:220v, 2.2kw, 2800 rpm or380v, 2.6kw, 1375 rpm

•Electro-hydraulic driven •Synchronization of cylinders independent from load distribution with mechanical

leveling system. •Mechanical safeties with automatic engagement.

•Two kinds of safety release (manual or automatic) for customer’s option. •Two kinds of lowering operation (manual or /automatic) for customer’s option,

•Overload valves, •Lowering speed control,

•Manual emergency pump. •Anti-crushing protections,

•Three adaptor extensions (50mm, 75mm, 150mm)

BRANDED EQUIPMENT

SpecificationsMax Wheel Base: 4580mmRise: 1850mmLength Overall: 6029mmWidth Overall: 3327mmInside Of Columns: 2980mmBetween Columns: 4610mmHeight of Columns: 2084mmHeight of Runways: 180mmWidth Between Runways: 0-1240mmLength Of Runways: 5030mmLifting Capacity: 5443kgAir Supply Required: 85-115PSiMotor: 2HPVoltage (single phase): 220V

IM-4P Four Post LiftIM-4P Four Post Lift

BRANDED EQUIPMENT

Electro-Hydraulic 2 Post Lift – Clear floorElectro-Hydraulic 2 Post Lift – Clear floor

•Electro-hydraulic driven •Synchronization of cylinders independent from load distribution with mechanical

leveling system. •Mechanical safeties with automatic engagement.

•Two kinds of safety release (manual or automatic) for customer’s option. •Two kinds of lowering operation (manual or /automatic) for customer’s option,

•Overload valves, •Lowering speed control,

•Manual emergency pump. •Anti-crushing protections,

•Three adaptor extensions (50mm, 75mm, 150mm)

Capacity 4500kgMaximum lifting height 1900mmMinimum lifting height 98mmOverall height 3750mmOverall width 3420 mmWidth between columns 2800 mmMaximum vehicle width 2580 mmLifting time 60 sLowering time 60 sCompressed air pressure 6 bar – 8 barNoise level 75 dB(A)/1mWorking temperature -10 °C ÷ 40 °CAverage weight of package 720kgElectric Motor:220v, 2.2kw, 2800 rpm or380v, 2.6kw, 1375 rpm

BRANDED EQUIPMENT

Electric Hydraulic PressElectric Hydraulic Press

Technical Data CIZ-50 CIZ-100Capacity 50 ton 100 tonOverall Height 2300mm 2400mmOverall Width 1420mm 1660mmTable Width 800mm 1000mmTable Height 1100mm 1280mm

BRANDED EQUIPMENT

IM-103941 Tubeless Truck Tyre Demounting ToolIM-103941 Tubeless Truck Tyre Demounting Tool

BRANDED EQUIPMENT

CIZ-TJ20 Trolley Jack 20 TonCIZ-TJ20 Trolley Jack 20 Ton

Technical Data Capacity on plate 20 tonOverload capacity (safety feature) 5 tonMinimum lifting height 180 mmMaximum lifting height 600 mmOverall Length 1910 mmOverall Width 340 mmWeight 165 kg

Hydraulic Trolley Jack with an automatic overload safety valve, which avoid any load superior to the nominal capacity in way to warrant more safety to the operator and more service life to the jack. Decent by pedal – stand by man system. Supplied with pedal for a quick approach of the loads, removable handle for quick and easy transport. Equipped with automatic end stroke safety valve.

BRANDED EQUIPMENT

CSC - Coil Spring CompressorCSC - Coil Spring Compressor

•Foot operated hydraulic unit

•Quicker and easier than using ratchet driven spring compressor

• Plastic coated yokes reduce the risk of spring slippage or damage

•Are suitable for springs from 102mm to 160mm

Specifications

Maximum Load : 1500 Upper Yoke positions: 7 Lower Yoke Travel: 340mm Spring Diameter: 102 – 160mm

BRANDED EQUIPMENT

Junior Rim Straightening MachineJunior Rim Straightening Machine

The Atek Junior Rim repair machine is designed to repair all rims between 10” and 24” with the aid of a hydraulic piston. The unit is supplied with various spacers, nuts and bolts to enable the user to mount the wheel for repairs. A pointer is supplied to aid the user in identifying dents and other imperfections on the rims.

Rim diameter 10” – 24”Working Pressure : 140 bar

• Net weight : 178 kg • Hydraulic Motor : 0,55 kW / 0,75 hp

The Konig 5700 Rim repair machine is designed to repair all rims between 10” and 24” with the aid of a hydraulic piston and a cleaning lathe. Rims can be returned to their original condition in minutes.

The Konig 5700 is accompanied by various spacers, nuts and bolts to enable the user to mount any wheel for repairs. An electro magnetic pointer is supplied to aid the user in identifying dents and other imperfections on the rims.

Rim diameter 10” – 24”Working Pressure : 140 bar

• Net weight : 362 kg • Hydraulic Motor : 0,55 kW / 0,75 hp• Working Motor : 0,75kW / 1,00 hp

• Rotating Speed 250 RPM

Konig 5700 Rim Straightner with LatheKonig 5700 Rim Straightner with Lathe

• 6.3 Ton lifting capacity• Built in Ramp Top conversion complete with Extended slip plates and recesses for

turn tables.• Electric/hydraulic power system

• Single hydraulic cylinder mounted underneath runway• Internal “Anti-Sway’ slider blocks in each column

• Features heavy-duty ½” aircraft cable• Oversized self-lubricating cable rollers

• Rugged 1-3/8” roller axles• Multi-position safety locks in each column

• Ramps feature non-skid surface• Push-button safety release

• Runways adjust for different tread widths• Optional drive-thru ramps available

HD-14LSX Wheel Alignment LiftHD-14LSX Wheel Alignment Lift

Product Features:Product Features:Equipped with preset and manual inflation

Two outlets for nitrogen, this product can inflate two tyres at the same time. It is also equipped with an air outlet to fill air.

Equipped with four foot casters, it is more convenient to operate.Generates Nitrogen from your compressed air

2 Pre-Filters / LED display55L/14.5gal(us) internal Nitrogen Storage Tank.

Remains at last settingAudible and visual end of the cycle signal indicators

Automatic vacuum supply and nitrogen-fill.

Nitrogen Generator / Tyre Inflator PN-8820Nitrogen Generator / Tyre Inflator PN-8820

TECHNICAL INFOTECHNICAL INFO

Power Requirement 110/240Vac / 50-60HZ

Power Consumption 20W

Operating Temperature Range -20℃C to 70℃C

Compressed Air Input Range 6-8.5bar / 600-850kPa

Nitrogen Purity > 97%

Nitrogen Output 70L/min @ 9bar / 900kPa

Maximum Nitrogen Pressure 8bar / 800kPa

Nitrogen storage Tank 55 liters

Dimensions (L*W*H) 720mm x 570mm x 1330mm

Packing Size (L*W*H) 735mm x 512mm x 1455mm

Net Weight 116kg

Gross Weight 140kg

Suitable for Cars and Light Trucks

Product Features:Product Features:It is equipped with an air outlet to fill air.

It is equipped with a Nitrogen outlet to fill Nitrogen Equipped with four foot casters, it is more convenient to operate.

Generates Nitrogen from your compressed air2 Pre-Filters

External 120 liter nitrogen storage tank10m standard hose supplied

Nitrogen Generator / Tyre Inflator PN-8890Nitrogen Generator / Tyre Inflator PN-8890Cars & Heavy TrucksCars & Heavy Trucks









Nitrogen storage Tank External 120 liters


Packing Size or main body 735mm x 512mm x 1455mm(L x W x H)

Packing Size of Tank 435mm x 435mm x 1200mm

Gross Weight 280kg

Suitable for Cars, Light Trucks, Heavy Trucks

Product Features:Product Features:Auto-start inflation

Automatic zero drift adjustmentRemains at last setting

Audible and visual end of cycle signal indicatorsLCD display

4 x 8m standard hoses4 Nitrogen outlets to fill Nitrogen

Equipped with four foot casters, it is more convenient to operate.Generates Nitrogen from your compressed air

External 120 liter nitrogen storage tank

Nitrogen Generator Tyre Inflator PN-8850Nitrogen Generator Tyre Inflator PN-8850Cars & Light TrucksCars & Light Trucks









Nitrogen storage Tank External 120 liters


Packing Size or main body (L x W x H)Packing Size of Tank

735mm x 512mm x 1455mm

435mm x 435mm x 1200mm

Net Weight 250kg

Gross Weight 140kg

Suitable for Cars, Light Trucks

CB460B TRUCK WHEEL BALANCERCB460B TRUCK WHEEL BALANCER

Max Wheel Diameter 1200mm Wheel Width 20” Max Wheel Weight 200kg Accuracy 1g Rotation Speed 100/200rpm Power 0.55kw Machine weight 269 kg Equipped with a Wheel Lift

CB910GB WHEEL BALANCERCB910GB WHEEL BALANCER

Max Wheel Diameter 1000mm Wheel Width 20” Max Wheel Weight 65kg Accuracy 1g Rotation Speed 200rpm Motor 0.25kW Power Requirements 220v/1ph Machine weight 110 kg

Manual data input

CB956B WHEEL BALANCERCB956B WHEEL BALANCER

Max Wheel Diameter 1200mm Wheel Width 20” Max Wheel Weight 75kg Accuracy 1g Rotation Speed 200rpm Power Requirements 0.25kw Machine weight 137 kg

2D Automatic measurement Multi-balancing modes Wheel Brake Up to 4 user

modes Alu Split weight program

Foldable Display Unit


3D Automatic measurement * Multi-balancing modes Automatic Wheel Brake * Up to 4 user modes Alu Split weight program * Foldable Display Unit Statistical Analysis * Facility to attach a mini printer

Optional: Wheel Lift

Max Wheel Diameter 1200mm Wheel Width 20” Max Wheel Weight 75kg Accuracy 1g Rotation Speed 200rpm Power Requirements 0.25kw Machine weight 143 kg


Max Wheel Diameter 1200mm Wheel Width 20” Max Wheel Weight 75kg Accuracy 1g Rotation Speed 200rpm Power 0.25kw Machine weight 164 kg

3D Automatic measurement * Multi-balancing modes Foot Brake * Up to 4 user modes Alu Split weight program * LCD Display Statistical Analysis * Lazer Scale

M806 MOTORCYCLE TYRE CHANGERM806 MOTORCYCLE TYRE CHANGER

Max Wheel Diameter 960mm Rim Width 3” – 10” Outside Clamping 6” – 24” Rotation Speed 7 rpm Power 0.75 -1.1kw Machine weight 175 kg

Specially designed tyre changer for two and four wheel motorcycle tyres. Special Tool head designed specifically for easy mounting & dismounting of motorcycle tyres of all sizes. The shape of the bead breaker blade will easily break the bead of small , narrow and standard motorcycle tyres. The sliding clamping jaws have tree positions that will cover from 6” to 24” rims.

Max Wheel Diameter 1000mm Rim Width 4” - 12” Inside Clamping 12” - 24” Outside Clamping 10” - 20” Power 0.75 -1.1kw Rotation Speed 7 rpm Machine weight 175 kg

Semi automatic tyre changer with swing arm. High quality mount/demount foot . Mag protectors for foot and claws. Water trap & oiler. Stainless steal bead breaking cylinder.

Optional Motorcycle / ATV adaptor available.

LC810G SEMI AUTOMATIC TYRE CHANGERLC810G SEMI AUTOMATIC TYRE CHANGER

LC885A AUTOMATIC TYRE CHANGERLC885A AUTOMATIC TYRE CHANGER

Max Wheel Diameter 1040mm Rim Width 3” - 12” Power 0.75 -1.1kw Speed 7 rpm Inside Clamping 12” -24” Outside Clamping 10” - 20” Rotation Machine weight 240 kg

AL320B HELP ARMAL320B HELP ARM

Automatic tyre changer with rear tilting arm. Pneumatic column lock. Mag protectors for foot and claws. Water trap and oiler. Stainless steal bead breaking cylinder. Turn tables equipped with a protective cover.

Optional: Help arm for low profile tyres

887IT AUTOMATIC TYRE CHANGER887IT AUTOMATIC TYRE CHANGER

Max Wheel Diameter 1030mm Rim Width 3” - 15” Inside Clamping 13” -26” Outside Clamping 10” - 24” Power 0.75-1.1kw Machine weight 260 kg Speed Rotation 7 rpm

Automatic tyre changer with rear tilting arm. Pneumatic column lock. Mag protectors for foot and claws. Water trap and oiler. Stainless steal bead breaking cylinder. Turn tables equipped with a protective cover. 80MM Turn tables cylinder increases clamp force. Turn table inflation device. The design of the bead breaking blade rotates enabling best bead breaking force.

Optional: Help arm for low profile tyres

AL320B HELP ARMAL320B HELP ARM

898ITA FULLY AUTOMATIC LEVERLESS TYRE CHANGER898ITA FULLY AUTOMATIC LEVERLESS TYRE CHANGER

Max Wheel Diameter 1200mm Machine weight 260 kg Rim Width 5” -15” Inside Clamping 14” - 28” Rotation Speed 7 – 13 rpm Power 0.8kw -1.2 Kw

Automatic tyre changer with centre chuck with protective cover and cones of 5 types, making the positioning of various rims accurate and is very fast. Helper with double press disk. Hand held bead blaster. Camera assists with mounting and demounting of tyres Lever less structure makes the operation easy.

LC588 TRUCK TYRE CHANGERLC588 TRUCK TYRE CHANGER

Max Wheel Diameter 1500mm Wheel Width 760mm Power Requirements 1.8kw Internal Clamping 14” -26” Rotation speed ~6 Working Pressure 150 bar Machine weight 561 kg

The tyre changer is used to mount and demount the drop centre rim / tubeless rims / wheel with rim of the passenger car/truck/agriculture vehicle / industrial vehicles. It is equipped with a hydraulic driven carriage making the tyre move on the tyre changer without man power. The small and portable console is very convenient to observe from different views to avoid mis-operation in the process

LC590 COMMERCIAL TYRE CHANGERLC590 COMMERCIAL TYRE CHANGER

Max Wheel Diameter 2200mm Wheel Width 1100mm Power 2.4/3 kw Internal Clamping 14” -56” Working Pressure 150 bar Machine weight 987 kg

The tyre changer is used to mount and demount the drop centre rim / tubeless rims / wheel with rim of the passenger car/truck/agriculture vehicle / industrial vehicles. Tool head rotates 360 degrees. Tool arm with automatic tilt back function. It is equipped with a hydraulic driven carriage making the tyre move on the tyre changer without man power. The small and portable console is very convenient to observe from different views to avoid mis-operation in the process

LC596 EARTHMOVER TYRE CHANGERLC596 EARTHMOVER TYRE CHANGER

Max Wheel Diameter 2500mm Wheel Width 1400mm Internal Clamping 14” -58” Rotation speed 6 & 12 Working Pressure 8 bar Power 3.2/4 kw Machine weight 1500 kg

The tyre changer is used to mount and demount the drop centre rim / tubeless rims / wheel with rim of the passenger car/truck/agriculture vehicle / industrial vehicles. Tri-guide rail structure guarantees that the tool arm always returns to centre. The tool arm and carriage move synchronously shortening the operation time. Tool head rotates 360 degrees. Tool arm with automatic tilt back function. It is equipped with a hydraulic driven carriage making the tyre move on the tyre changer without man power.

G18 WHEEL ALIGNMENT MACHINEG18 WHEEL ALIGNMENT MACHINE

8 Sensor CCD wheel alignment machine, supplied complete with cabinet, keyboard, mouse printer, 4 x wheel clamps, 2 x turn tables, brake pedal depressor and steering wheel holder. 360 degrees closed space comprehensive measurement of the vehicle chassis, using measuring principle of geometric centerline and thrusting line, the steering wheel won’t slant after adjustment. Adopting high-precision CCD image sensor and angle sensor technology guarantees the accuracy of system measurement. Adopting Zigbee wireless communication with high-frequency 2.4GHZ, low power consumption, stable and reliable transport capacity. More than 20000 data of domestic and foreign models with fuzzy query and database intelligent upgrading function. System internal self-test, self-diagnosis and one-key self repairing.

Trestle / Car Stand Set with Rubber HeadTrestle / Car Stand Set with Rubber Head

Pin type support axle stands adjust to multiple height positions. Large support saddle with oil resistant rubber adaptor for optimal stability and damage free contact; Designed with wide feet for high standard of safety

Model Capacity Min Height Max Height Length Width G.W N.W

Y452300 3 Ton 268 425 190 170 7.5 7

Trestle / Jack StandsTrestle / Jack StandsAll stands have a heavy duty robot welded frame, and a multi-position ductile ratchet bar. The quick adjustment mechanism securely locks into the right location. Includes counter-weighted pawl for safe securing.


Y450301 3 Ton 268 425 190 170 7.5 7

Y451600 6 Ton 394 597 270 240 15.2 13.8

Y451200 12 Ton 440 710 310 260 27.1 26

Hydraulic Bottle JacksHydraulic Bottle Jacks

These professional bottle jacks meet the highest standards. All models have a chrome main ram and chrome pump piston. The extension screws have a pressed tread. These units can be used horizontally and vertically.

Model Capacity Min Height Lifting Height Adj. Height Max Height N.W

Y410200 2 Ton 158 90 60 308 2.3

Y410400 4 Ton 180 110 60 350 3.3

Y410600 6 Ton 197 125 60 382 4.4

Y411200 12 Ton 214 125 60 399 7.2

Y412000 20 Ton 244 145 60 449 10.5

Y413000 30 Ton 285 180 0 465 14.6

Y420303 - 3 ton capacity. This jack is equipped with the TURBO LIFTER system, rubber saddle and handle bumper. The professional universal joint release valve makes it possible to lower the jack with load very precisely and free from any risks The pump pistons (protected with jacket to prevent from intrusion of dirt) are placed at a 45 degree angle so a complete pumping stroke will always be utilized. The jack has a chrome main ram.

Turbo Lifter Trolley Jack Turbo Lifter Trolley Jack

Long chassis Trolley Jack Long chassis Trolley Jack


Y420303 3 Ton 130 490 720 360 43 41

Y422500 2,5 Ton 85 465 780 390 48,5 47

Y420200 2 Ton 140 800 1250 470 65 58

Y420301 3 Ton 130 600 1305 320 75 66

Y420500 5 Ton 150 685 1420 355 115 95

Y421000 10 Ton 160 685 1700 510 170 145

Y432001 20 Ton 185 373 580 320 51 47

Air service JackAir service JackY432001 - 20 ton capacity. This heavy duty model is designed for servicing jobs in the truck industry. This jack has an extra extension screw in addition to 3 saddles that can be placed on top of each other for added height. Chrome main ram and aluminum air motor guarantee optimum lifetime. Air filter, connected to hose included.

Low Profile Trolley Jack Low Profile Trolley Jack Y422500 – 2.5 ton capacity. This Ultra low garage jack has a minimum height of 85mm and is equipped with a rubber saddle and handle bumper

All models are equipped with a foot pedal and ergonomically designed handle. These jacks have a chrome main ram and professional universal joint release valve that makes it possible to lower loads very precisely and free of any risks.

Wheel Breaker Set Wheel Breaker Set Y471180 -10 Ton Capacity Wheel Breaker set. This kit eliminates one of the most dangerous jobs within the tyre service industry: Truck wheel removal!

Universal 3 piece Bead Breaker Universal 3 piece Bead Breaker

Industrial Hand Pump Industrial Hand Pump Y471155 – Single speed 1000 cc, 700bar

Aluminum Foot PumpAluminum Foot PumpY471150 – Air Hydraulic 2000cc, 700bar

Y471120 – Works on most single, two and three piece rims

Y471130 – To be used on 5 piece rims 25” – 51”. With pry bar / bead loosening pockets. G.W.14

OTR 5 piece Bead Breaker OTR 5 piece Bead Breaker

Foldable engine Crane Foldable engine Crane


Y440101 1 Ton 300 1940 1300 900 84 80

This 1 ton foldable crane constructed from heavy-gauge, welded square tubular steel, includes the following features: *Hold-to-run control safety system *Nylon wheels * Ram and pump are combined into one unit to eliminate hose and / or connections *4 positions to secure arm *chrome ram *Rear wheels rotate 360 degrees *Safety feet at base to support stability when crane is folded up *Max lifting height 1940mm

YDJ3 Engine Crane 3 tonYDJ3 Engine Crane 3 ton

Heavy gauge welded steel construction. A telescopic extension gives additional reach to pull engines from vehicles. Four position boom for maximum versatility.

Model Capacity Min Height Max Height N.W

YDJ3 3 Ton 300 2300 163

Hydraulic Workshop Press Hydraulic Workshop Press

15 ton capacity. This press comes standard with a two speed pump, arbor and pressure gauge. Welded ready to use model. Nine different height positions for securing the table. Chrome main ram and pump pistons

Model Capacity Frame Height Frame Width Hydraulic Stroke G.W N.W

Y461501 15 ton 1730 740 195 159 131

WT-WB Wheel BalancerWT-WB Wheel Balancer

TECHNICAL SPECIFICATIONMax. wheel weight 75kgWheel diameter 1000mm (39”)Rim diameter 10" - 26" Wheel width 1.5" - 20"Balancing precision ±1gResolution 1.4 degreesCycle time 7 sMax. balancing speed 150 rpmPower supply 220V/230V-1Ph

380v/400V-3PhMotor power 180wNoise level < 70 dbAColour Grey

WT - SWA Semi Automatic Tyre ChangerWT - SWA Semi Automatic Tyre Changer

Technical DataRim dimension 10” – 24”Max wheel diameter 1000 mmMax wheel width 340mm (13”)Bead breaker force (10 bar) 30800 NInflating pressure limiting device max 3.5 barPower supply 220v or 380vMotor power 0.55 kWMax spindle torque 1150 NmDimensions 1120 x 970 x 1750Nett Weight 200kgNoise level <70 dB (A) Colour Grey

IM - MR30 Mid Rise Lift Specifications: Overall width: 1890mm Overall Length: 2045mm Lowered Height:...

Documents

Transcript of IM - MR30 Mid Rise Lift Specifications: Overall width: 1890mm Overall Length: 2045mm Lowered Height:...