لﺎﻔﻁﺃ ﻯﺩﻟ ﻉﺍﺩﺒﻹﺍ ﺔﻴﻤﻨﺘﻟ ﺡﺭﺘﻘﻤ … · ٢ ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑ {ﻥﻮُﻜ ﻦﻴَﻓ ُﻛ ﻪَُﻟﻝﻮُ
ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel,...
Transcript of ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel,...
![Page 1: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/1.jpg)
بسم ا الرحمن الرحيم
![Page 2: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/2.jpg)
LecturerAhmed H. Hadi
Training package inIntroduction
For students of second class
Ministry of Higher Education and Scientific ResearchFoundation of Technical Education
Technical College / Al-Najaf
![Page 3: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/3.jpg)
1 / B –Rationale :-
Elements of a communication system.
/ Over view1/ Over view1
1 / A –Target population :-For students of second class inCommunications Techniques Engineering Department
![Page 4: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/4.jpg)
1 / C –Central Idea :-• Define System• Elements of a communication system.
1 / C –Central Idea :-• Define System• Elements of a communication system.
:Objectives–/ D1
• Define System• Define Signal• Designation of Frequencies
:Objectives–/ D1
• Define System• Define Signal• Designation of Frequencies
![Page 5: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/5.jpg)
2/ Pre test :-2/ Pre test :-
2. Very High Frequency (VHF) is
(a) 3-30 MHz (b) 30-300 MHz (c) 3-30 GHz
2. Very High Frequency (VHF) is
(a) 3-30 MHz (b) 30-300 MHz (c) 3-30 GHz
Multiple Choice Questions With Answer
١١1. Voice Frequency (VF) is
(a) 30-300 MHz (b) 3-30 kHz (c) 300-3 kHz
1. Voice Frequency (VF) is
(a) 30-300 MHz (b) 3-30 kHz (c) 300-3 kHz
٢٢
![Page 6: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/6.jpg)
Introduction to communication systemsFerrel G. Stremler
1-
Communication Systems (Analog and Digital)By Sanjay Sharma
2-
Analog CommunicationA. P. GodseU. A. Bakshi
3-
Communication Theory and systemsT. R. Ganesh Babu, and G. Srinivasan:
4.
3/ Performance Objectives :-3/ Performance Objectives :-
ReferencesReferences
![Page 7: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/7.jpg)
DetailsThe week
Periodic and aperiodic signals, even and oddsignals, energy and power signals
1
Singularity functions: Unit impulse function;unit step function; Unit ramp function
2
Fourier series: Trigonometric Fourier series,complex Fourier exponential series
3
Fourier transform: properties of Fouriertransform
4
convolution and impulses system response andfilters
5
Parseval's theorem for energy signals.6
Noise: Band-limited white noise; thermal noise;Shot noise, noise figure.
7-8
SyllabusSyllabus
![Page 8: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/8.jpg)
Amplitude modulation: Amplitude modulationsuppressed carrier, generation of DSB-SC signals,demodulation (detection) of DSB-SC signals
9-10
Amplitude modulation: Amplitude modulation largecarrier (AM), the AM spectrum, carrier and sidebandpower in AM, generation of DSB-LC signals,demodulation (detection) of DSB-LC signals
11-12
Single-sideband (SSB) modulation, generation of SSBsignals, demodulation of SSB signals
13-14
Frequency-division multiplexing (FDM)15
Angle modulation: FM and PM, narrowband FM,wideband FM, FM spectral analysis, FM bandwidth,general approximations
16-219
![Page 9: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/9.jpg)
Phase modulation20
Generation of wideband FM signals: Indirect FM, directFM, Demodulation of FM signals
21-22
Phase modulation: the PM spectrum PM, PM transmitter.23
Noise in CW modulation: system models and parameters;interference noise in linear modulation ;noise inexponential modulation; comparison of CW modulationsystem
24-25
Sampling and pulse modulation: sampling theory andpractice, pulse modulation: Pulse amplitude modulation(PAM)
26
Time-division multiplexing (TDM)27
Pulse duration modulation (PDM), PDM and Pulseposition modulation (PPM)
28
Pulse code modulation (PCM), Delta Modulation (DM),and Differential Pulse Code Modulation (DPCM)
29-30
![Page 10: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/10.jpg)
![Page 11: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/11.jpg)
![Page 12: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/12.jpg)
DESIGNATION OF FREQUENCIES
30-300 Hz Extremely Low Frequency (ELF)
300-3 kHz Voice Frequency (VF)
3-30 kHz Very Low Frequency (VLF)
30-300 kHz Low Frequency (LF)
300-3 MHz Medium Wave Frequency (MW)
3-30 MHz Short Wave Frequency (SW)
30-300 MHz Very High Frequency (VHF)
300-3000 MHz MHz Ultra High Frequency (UHF)
3-30 GHz Super High Frequency (SHF)
30-300 GHz Extremely High Frequency (EHF)
![Page 13: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/13.jpg)
Introduction
Irrespective of the form of communication process beingconsidered, there are three basic elements to everycommunication system, namely, transmitter, channel, andreceiver, as depicted in Figure below. The transmitter islocated at one point in space, the receiver is located atsome other point separate form the transmitter, and thechannel is the physical medium that connects them.
Introduction
Irrespective of the form of communication process beingconsidered, there are three basic elements to everycommunication system, namely, transmitter, channel, andreceiver, as depicted in Figure below. The transmitter islocated at one point in space, the receiver is located atsome other point separate form the transmitter, and thechannel is the physical medium that connects them.
![Page 14: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/14.jpg)
The purpose of the transmitter is to convert themessage signal produced by the source of informationinto a form suitable for transmission over the channel.However, as the transmitted signal propagates along thechannel, it is distorted due to channel imperfections.Moreover, noise and interfering signals ( originatingfrom other sources ) are added to the channel output,with the result that the received signal is a corruptedversion of the transmitted signal. The receiver has thetask of operating on the received signal so as toreconstruct a recognizable form of the original message
signal for a user.
The purpose of the transmitter is to convert themessage signal produced by the source of informationinto a form suitable for transmission over the channel.However, as the transmitted signal propagates along thechannel, it is distorted due to channel imperfections.Moreover, noise and interfering signals ( originatingfrom other sources ) are added to the channel output,with the result that the received signal is a corruptedversion of the transmitted signal. The receiver has thetask of operating on the received signal so as toreconstruct a recognizable form of the original message
signal for a user.
![Page 15: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/15.jpg)
Figure: Elements of a communication system.Figure: Elements of a communication system.
![Page 16: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/16.jpg)
There are two basic modes of communication:
1. Broadcasting, which involves the use of a singlepower transmitter and numerous receivers that arerelatively inexpensive to build. Here information-bearing signals flow only in one direction.
2. Point-to-point communication, in which thecommunication process takes place over a linkbetween a single transmitter and receiver. In thiscase, there is usually a bidirectional flow ofinformation-bearing signals, which requires theuse of transmitter and receiver at each end of thelink.
There are two basic modes of communication:
1. Broadcasting, which involves the use of a singlepower transmitter and numerous receivers that arerelatively inexpensive to build. Here information-bearing signals flow only in one direction.
2. Point-to-point communication, in which thecommunication process takes place over a linkbetween a single transmitter and receiver. In thiscase, there is usually a bidirectional flow ofinformation-bearing signals, which requires theuse of transmitter and receiver at each end of thelink.
![Page 17: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/17.jpg)
١١
٢٢
Define the following terms
Signal
Quiz /Quiz /
System is a group of object that can interactharmoniously and that are combined in a mannerintended to achieve a desired objective.
is an event that serves, or at least is capable, to startsome action; i.e. it can incite action.
![Page 18: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/18.jpg)
-/ Post test :5
What are two basic modes of communication:What are two basic modes of communication:
1.Broadcasting, which involves the use of a single powertransmitter and numerous receivers that are relativelyinexpensive to build. Here information- bearing signalsflow only in one direction.
2. Point-to-point communication, in which thecommunication process takes place over a link between asingle transmitter and receiver. In this case, there isusually a bidirectional flow of information-bearingsignals, which requires the use of transmitter andreceiver at each end of the link.
1.Broadcasting, which involves the use of a single powertransmitter and numerous receivers that are relativelyinexpensive to build. Here information- bearing signalsflow only in one direction.
2. Point-to-point communication, in which thecommunication process takes place over a link between asingle transmitter and receiver. In this case, there isusually a bidirectional flow of information-bearingsignals, which requires the use of transmitter andreceiver at each end of the link.
![Page 19: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/19.jpg)
References:References:
11
2
T. R. Ganesh Babu, and G. Srinivasan:“ Communication Theory and systems”, 2006.
Sanjay Sharma: “Communication Systems(Analog and Digital) ”Sanjay Sharma: “Communication Systems(Analog and Digital) ”
![Page 20: ﻢﻴﺣﺮﻟﺍ ﻦﲪﺮﻟﺍ ﺍ ﻢﺴﺑcommunication system, namely, transmitter, channel, and receiver, as depicted in Figure below. The transmitter is located at one point](https://reader031.fdocuments.net/reader031/viewer/2022012008/611d6c639b690a52456e570d/html5/thumbnails/20.jpg)
شكراً لكم شكراً لكم