Automatic gain, exposure and iris control Automatic white balanceInternal/External H and V sync input/outputLeft/right digital bit shiftTest image with image superimpositionBuilt in pulse generatorProgrammable I/O mappingDynamic transfer function correction Dynamic black level correction Defective and hot pixel correction (static/dynamic)Temperature monitor Field upgradeable firmwareCustomer defined Look Up Table (LUT)Two dimensional Flat Field Correction Reverse image (H mirror)MTBF of 660,000 hours @ 40°C

IGV-B4820

Features4904/4872 x 3280/3248Mono or color 8, 10, 12 bit single or dual output (16 bit is single only)Normal and over-clock operation (3.2/4.2 fps)10/100/1000 Gigabit Ethernet LAN (RJ-45)RS232 serial communicationAnalog and digital gain and offset control1x, 2x, 3x, 4x, 8x horizontal and vertical binning Eight (8) independent horizontal and vertical AOIs Programmable horizontal and vertical resolutionProgrammable line time, frame time and speed Programmable external triggerInternal/External exposure controlStandard, fast, frame accumulation, double and asynchronous triggering modes

IMPERX IGV-B4820 is an advanced progressive scan, fully programmable CCD camera designed for imaging applications that require high quality images, powerful features and flexibility. The camera is small, light weight, and built around the TRUESENSE Imaging KAI-16000 7.4 micron interline transfer CCD image sensor with a 43.3 mm optical format.

IMPERX IGV-B4820 provides an image resolution of 4904 x 3280 and delivers up to 4.2 frames per second at full resolution. The camera’s 14 bit internal data image processing engine is based on an industrial grade high-speed, high-density FPGA, enabling a broad standard feature set and easy implementation of demanding custom imaging solutions. The thermally optimized, mechanical and electrical design plus the extended operating temperature range (-40°C to +85°C), and high MTBF of 660,000 hours @ 40C, make this GigE Vision® camera a perfect fit for the most demanding industrial, medical, scientific and military applications. This camera is also available with CoaXPress and Camera Link® interfaces.

APPLICATIONSAerial MappingAerial Robots: Military, Police AerospaceAgricultureAutomation

RoboticsScientific AppsSurveillance Semiconductors Transportation Textile/Apparel

Automotive BiometricsBroadcasting Printed Circuit Board (PCB) ElectronicsEnergy/Solar/Wind Power

Flat Panel InspectionFood/Beverage Homeland Security Law Enforcement Intelligent Traffic Systems (ITS)Medical Devices/Imaging

Metrology Microscopy Military/Defense Pharmaceuticals Particle Image Velocimetry (PIV) Radiology

BOBCAT IGV-B4820 Specifications

IMPERX | 6421 Congress Avenue | Boca Raton | FL 33487 | USAPhone: +1-561-989-0006 | 1-866-849-1662 | Fax: +1-561-989-0045

www.imperx.com | sales@imperx.comCopyright © 2013. IMPERX product information is subject to change without notice.

Maximum Resolution 4904 x 3280Sensor Type 43.3 mm, CCD KAI-16000Pixel Size 7.40 µmFrame Rate 3.2/4.2 fps (normal/overclock)Max Frame Rate 18 FPS Minimum S/N ratio 60 dbVideo Output RJ45 CAT5e, CAT6Output Format Mono or color 8, 10, 12 bit single or dual output (16 bit is single only)Binning H & V x1, x2, x3, x4, x8Area of Interest 8 independent AOIs, 2 x 2 to 4904 x 3280Shutter Speed 1/100,000 to 1/3.2 sec (nom)Long Integration Up to 16 secGamma Correction G=1.0, G= 0.45, user upgradable LUTVideo Gain 36 dB range, 1024 steps, 0.0351 dB per stepExposure and AGC Manual, Auto, ProgrammableIris Control Auto, ProgrammableStrobe Output Programmable position and durationImage Overlay Yes, Programmable

Data Corrections DPC, HPC, LUT, FFCHardware Trigger LVTTL or TTL via IN1/IN2, level, edge, pulse-width, programmableSoftware Trigger Software internal, level, edge, pulse-width, programmableTrigger Modes Programmable, standard, double exposure, fast, frame accumulation, asynchronousMin. Illumination 1 Lux, F/1.4Supply Input Range 12 VDC, (10 V – 15 V)Power Consumption 5.4 W, 450 mA steady (Typ), 1.5 A inrushSize (W x H x L) 60 x 60 x 60mm Weight 375g Lens Mount F-MountVibration, Shock 10G (20 - 200)Hz XYZ, 70GEnvironmental Operation: (-40° to +85°)C Storage: (-40° to +90°)CHumidity 10% to 90% non-condensingMTBF 660,000 hours @ 40°CRegulatory FCC 15 part A, CE, RoHS

GigE Vision Protocol: 10/100/1000 Mb/s, 802.3, Ethernet V2.0, IPv4, IGMPv.2, UDP and ICMP, and GenICam

eBUS Drivers: Windows XP 32b, XP 64b, Vista 32b, Vista 64b, 7 32b, 7 64b. Linux: SuSE v10, RedHat 5 (Kernel 2.6)

Software: Pleora GEVPlayer, IM-PERX GEV Player(includes Cam-Config GUI), Bobcat GEV Download Utility, Net Command

SDK: PureGEV GigE Vision SDK for Windows (Microsoft Visual C++, COM, .NET, C#, VB.NET, Borland C++Builder), PureGEV, GigE Vision SDK for Linux

Compatible with: Labview, Halcon, MIL, Common Vision BLOX, Stre-amPix, ActiveGigE, and others

Multicast capable

Spectral Response Mechanical Dimensions

Accessories:

Software/Drivers/Interface

Power and I/O Interface:1 12V DC Return 2 +12V DC3 IRIS VCC 4 IRIS Video5 IRIS Return 6 OUT1/2 Return

7 OUT1 Signal 8 IN1 Signal9 IN2 Signal10 IN1/2 Return11 Reserved12 OUT2 Signal

Connector: Hirose HR 10A-10R-12PB(71) PS12V04: Power Supply (sold separately)

Order Options:IGV-B4820M-TFO Monochrome GigE Vision OutputIGV-B4820C-TFO Color GigE Vision Output

For specific details and ordering information, consult the camera user’s manual or contact IMPERX at sales@imperx.com.