IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.

9
IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015

Transcript of IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.

Page 1: IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.

IFMIF/ELAMAT initiative in Poland

Adam Maj

NUPECC Meeting,Athens, March 13-14, 2015

Page 2: IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.

WARSZAWA• Warsaw University (with

Heavy Ion Lab.)• Warsaw University of

Technology• National Centre for Nuclear

Research (in Swierk)

WROCŁAW• Wroclaw University• Wroclaw University

of Technology

KRAKÓW• Jagiellonian University• University of Science and

Technology• Krakow University of Technology• Institute of Nuclear Physics (with

Cyclotron Centre Bronowice)

IFMIF/ELAMATRzeszów

Large and medium-size scientific centres in Poland

Page 3: IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.
Page 4: IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.

Summary of options for IFMIF implementation

IFMIF-Full IFMIF/DONES IFMIF-Proto

Beam current 2 x 125 mA(Li target)

1 x 125 mA(Li target)

1 x 125 mA(Li target)

Beam energy 40 MeV 40 MeV 26.5 MeV

Neutron yield (n/(sr.µA.s)) 40x1010 40x1010 12x1010

Total neutron production 1018 n/s 5 x 1017 n/s 1.5 x 1017 n/s

Beam footprint 20 x 5 cm2 20 x 5 cm2 10 x 5 cm2 10 x 3 cm2

Typical Damage Rate

@

Irradiation volume

40 dpa/fpy @>40cm³+

20 dpa/fpy @>400cm³

+2 dpa/fpy @

>2000cm3

20 dpa/fpy @>40 cm³+

10 dpa/fpy @>250 cm³

+2 dpa/fpy@ >1400cm3

20 dpa/fpy @>90cm³+

10 dpa/fpy @300cm³

+2 dpa/fpy @>1000cm3

15 dpa/fpy @ 20cm³ +

2dpa/fpy @ >600cm³

Capability of facilityProvide Engineering +Scientific Database for DEMO / Power Plants

Provide Engineering +Scientific Database for DEMO

Provide Reference Data on He-effect + Fusion Neutron spectral effects

4

Page 5: IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.

Technical descriptionBased on the IFMIF IIEDR a preliminary conceptual design has been

prepared, including facility configuration, systems design, preliminary safety evaluation, 3D CAD,…

5

Cost estimate: ca. 400 MEuro

• In Dec 2014 F4E-GB invited EU member states to express potential interest to Host, by June ‘15 meeting.

• Construction to start in 2020

Page 6: IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.

Informal discussion with F4E and Polish Ministries startedRegional funds are reserved by the local governmentStructural funds possible

Page 7: IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.

At the end of 2014 the Scientific Committee was established, with the goal to define a scientific case on top of the material testing goals.

Page 8: IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.

Kick-off meeting od the S.C., Krakow, 6th of February 2015During the discussion following working groups and the SC liaisons were established:

First scientific workshop: june 29-30, Warsaw

Page 9: IFMIF/ELAMAT initiative in Poland Adam Maj NUPECC Meeting, Athens, March 13-14, 2015.

A NuPECC support and endorsement will be helpful