IFB No: KOSHI/NEA/71/72 - 1 Part I: Section IV A: The … No: KOSHI/NEA/71/72 - 1 Koshi Corridor...

IFB No: KOSHI/NEA/71/72 - 1

Koshi Corridor 220kV Transmission Line Project, Nepal Package KC1: Inaruwa-Basantapur-Baneshwar-Tumlingtar Transmission Line

Part I: Section IV –A: The Price Schedule

PART-I Section IV –A: The Price Schedule

Nepal Electricity Authority (A Government of Nepal Undertaking)

Transmission Directorate Koshi Corridor 220 KV Transmission Line Project

Bidding Document for

Package KC1: Procurement of Plant Design, Supply, and

Installation of Koshi Corridor (Inaruwa – Basantapur –

Baneshwar - Tumlingtar) 220 KV Transmission Line

(Single Stage Bidding)


Issued to: ________________________________

Employer: Nepal Electricity Authority

Koshi Corridor 220 KV Transmission Line Project

PART I OF III

Section IV –A: The Price Schedule

March 2015





Table of Contents

Invitation for Bids

PART I – Bidding Procedures

Section I. Instructions to Bidders

Section II. Bid Data Sheet

Section III. Evaluation and Qualification Criteria

Section IV. Bidding Forms

(Section IV –A: The Price Schedule -Separate folder)

Section V. Eligible Countries

PART II – Employer’s Requirements

Section VI. Employer’s Requirements

PART III – Conditions of Contract and Contract Forms

Section VII. General Conditions (GC)

Section VIII. Particular Conditions

Section IX. - Contract Forms





Section IV. Bidding Forms

Table of Forms

Letter of Bid

Letter of Bid – Single Stage Bidding

Schedules of Rates and Prices ( In a Separate folder Section IV-A)

Schedule No. 1. Plant and Equipment (Including Mandatory Spare Parts) Supplied from Abroad

Schedule No. 2. Plant and Equipment (Including Mandatory Spare Parts) Supplied within Employer’s Country

Schedule No. 3. Design Services and Prototype Testing

Schedule No. 4. Construction and Installation work

Schedule No. 5. Grand Summary

Schedule No. 6. Unit rates for the Supply and Installation of Galvanized Steel Earthwire

and accessories Price Adjustment

Technical Proposal

Site Organization Method Statement

Mobilization Schedule

Construction Schedule

Technical Data Sheet (Guaranteed Technical Particulars)

Contractor’s Equipment

Personnel

Proposed Subcontractors for Major Items of Plant and Installation Services

Contained in Part-II: Employer's

requirements





PART I OF III

Section IV –A: The Price Schedule

Single Stage Bidding

Schedule 5

Page 1 of 1

Price Schedule 5: Grand Summary

Amount Excluding VAT, Custom duty but including of TDS

Curency ( USD)

1Price Shedule No.1: Plant and Equipment (Including Mandatory Spares Parts) Supplied from Abroad

2Price Shedule No. 2: Plant and Equipment (Including Mandatory Spares Parts) Supplied within Employer's Country

3 Price Schedule No. 3: Design Services and Prototype Testing

4 Price Shedule No. 4: Construction and Installation Work

5 GRAND TOTAL excluding VAT and Custom Duty (to Bid Form)

Grand Total Amount in Words:

Date: Signature:Place:

Printed Name:

Designation:

Common Seal:

Nepal Electricity Authority

Transmission Directorate

Koshi Corridor Transmission Line Project

Design,Supply and Construction of Inaruwa-Basantapur-Baneshwar-Tumlingtar 220 kV double circuit Transmission

S.N particulars Remarks

Schedule1

Page 1 of 16

Price Schedule No.1. Plant and Equipment (Including Mandatory Spares Parts) Supplied from Abroad

For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10

1.0

1.1

a) Super Structure

i) DA + 0 M Standrad Towers No. 68 1 69

ii) + 3.0 M Body Extension No. 15 15

iii) + 6.0 M Body Extension No. 1 1

iv) + 9.0 M Body Extension No. 1 1 2

b) Stub (set of 4) for above Set 68 68

Nepal Electricity AuthorityTransmission Directorate

Koshi Corridor 220 kV Transmission Line Project Design, Supply and Installation of Inaruwa-Basantapur-Baneshwar-Tumlingtar 220 kV Transmission Line

S. N. Item Description Unit

Qty

Guaranted unit weight ( Kg)

Total Weight ( Kg)

Unit rate per Kg CIP Site ( in USD)

Total CIP site, US$

Design, Fabrication, galvanising & supply of various types of towers & tower parts, tower/leg extensions (complete) including stubs, step bolts and bolts & nuts , hangers, D-Shackles, pack washers as per specifications ( 220 kV Double Circuit Quad Moose Tower for Inaruwa-Basantapur Section)

Suspension Towers (DA (q) type) 0°-2°

Schedule1

Page 2 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)


Total CIP site, US$

1.2

a) Super Structure

i) DB + 0 M Standrad Towers No. 166 1 167





1.3

a) Super Structure

i) DC + 0 M Standrad Towers No. 9 1 10





Small angle (DB (q) type) tension towers (2°-15°)

Medium angle (DC (q) type) tension towers (16°-30°)

Schedule1

Page 3 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)


Total CIP site, US$

1.4

a) Super Structure

i) DD + 0 M Standrad Towers No. 13 1 14




b)Stub (set of 4) for above

Set 13 13

1.5

a) Superstructure MT 100 100

b) Stub (set of 4) MT 4 4

Large Angle (DD (q) type) tension towers (30°-60°)/ Dead-end towers

Special Tower (including design, fabrication, galvanising, complete with nuts, bolts & washers etc.) as per specifications

Schedule1

Page 4 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)


Total CIP site, US$

1.6

a)DA (q) type of towers for al type of +3m,+6m, +9m body extensions

a.1 +1.5 M Leg extensionNos.

10 10

a.2 +3 M Leg extensionNos.

5 5


2 2

b)DB ( q)type of towers for al type of +3m,+6m, +9m body extensions

b.1 +1.5 M Leg extensionNos.

50 50

b.2 +3 M Leg extensionNos.

25 25


12 12

Hill Side leg extension applicable for all type of towers as per specifications

Schedule1

Page 5 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)


Total CIP site, US$

c)DC (q) type of towers for al type of +3m,+6m, +9m body extensions

c.1 +1.5 M Leg extensionNos.

4 4

c.2 +3 M Leg extensionNos.

2 2

c.3 +4.5 M Leg extension Nos. 1 1

d)DD (q) type of towers for al type of +3m,+6m, +9m body extensions

0

d.1 +1.5 M Leg extension Nos. 5 5

d.2 +3 M Leg extension Nos. 3 3

d.3 +4.5 M Leg extensionNos.

2 2

1.7

Tower Materials for strengthening of towers where weight spans are excedding the Limits (applicable for DB (q), DC(q) and DD(q) type of towers with all extensions) as per specifications

MT 50 50

Sub Total 1

Schedule1

Page 6 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)


Total CIP site, US$

2.0

2.1

a) Super Structure

i) DA(t) + 0 M Standrad Towers No. 4 1 5

ii) + 3.0 M Body Extension No. 1 - 1

iii) + 6.0 M Body Extension No. 1 - 1



2.2

a) Super Structure

i) DB(t) + 0 M Standrad Towers No. 100 1 101





Design, Fabrication, galvanising & supply of various types of towers & tower parts, tower/leg extensions (complete) including stubs, step bolts and bolts & nuts , hangers, D-Shackles, pack washers as per specifications ( 220 kV Double Circuit Twin Moose Tower for Basantapur-Tumlingtar Section)

Suspension Towers (DA(t) type) 0°-2°

Small angle (DB(t) type) tension towers (2°-15°)

Schedule1

Page 7 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)


Total CIP site, US$

2.3

a) Super Structure






2.4

a) Super Structure

i) DD(t) + 0 M Standrad Towers No. 8 1 9





Set 8 8

Medium angle (DC(t) type) tension towers (16°-30°)

Large Angle (DD(t) type) tension towers (30°-60°)/ Dead-end towers

Schedule1

Page 8 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)


Total CIP site, US$

2.5



2.6

a)DB (t) type of towers for al type of +3m,+6m, +9m body extensions

a.1 +1.5 M Leg extension Nos. 30 30

a.2 +3 M Leg extension Nos. 15 15


7 7

b)DC(t) type of towers for al type of +3m,+6m, +9m body extensions


5 5


3 3

b.3 +4.5 M Leg extension Nos. 2 2

Special Tower as per specifications (including design, fabrication, galvanising, complete with nuts, bolts & washers etc.)

Hill Side leg extension applicable for all type of towers as per specifications

Schedule1

Page 9 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)


Total CIP site, US$

c)DD (t) type of towers for al type of +3m,+6m, +9m body extensions

0


c.2 +3 M Leg extension Nos. 2 2


2.7

Tower Materials for strengthening of towers where weight spans are excedding the Limits (applicable for DB(t), DC(t) and DD(t) type of towers with all extensions) as per specifications

MT 15 15

Sub Total 2

Schedule 1

Page 10 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8

3.0

3.1a Danger Plate Nos. 377 377b Number Plate Nos. 377 377c Anti Climbing Device

c.1 Suspension DA type of towers Set 72 72c.2 Small angle DB type of towers Set 266 266c.3 Medium angle DC type of towers Set 18 18c.4 Large angele DD type of towers Set 21 21c.5 Special Towers set 4 4

d Phase Plate (Set of 6) Sets 377 377e Circuit Plate (Set of 2) Sets 377 377f Aviation signal Sets 5 5g Bird Guards Sets 72 72


Qty

Unit Price (CIP Site) US$

Tower Accessories complete

Design, manufacture and Supply of Tower Accessories & Earthing as per specifications



Total CIP site, US$

Schedule 1

Page 11 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8


Qty




Total CIP site, US$

3.2

aPipe Type earthing complete with pipe, flat, salt, sand & charcoal.

Nos.183 183

b Counterpoise Type 0i) Counterpoise Type-30 m Nos. 63 63ii) Counterpoise Type-45m Nos. 67 67iii) Counterpoise Type-60m Nos. 64 64

4.04.1

a ACSR MOOSE Conductor Km 1140 1140

b AACSR MOOSE Conductor Km 20 20

4.2

aOPGW Fibre Optic Cable- 24 Fibre (DWSM) including Approach Fibre Cable

Km113 113

Earthing of Towers with necessary bolts, nuts & washers

Design, manufacture and Supply of following Line Materials as per specifications

Conductor

Sub Total of 3

OPGW

Schedule 1

Page 12 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8


Qty




Total CIP site, US$

4.3

a 90 KN Disc Insulators Nos. 1,866 1,866

b 160 kN Disc Insulator Nos. 101,976 101,976

c 210 kN Disc Insulator Nos. 648 648

4.4

4.4.1 Hardware fittings for Quad Moose tower

aDouble suspension Pilot Insulators String complete with hardwares, PArods etc. ( suitable for 2x15 nos. 90 KN insulators) sets 39 39

bDouble suspension strings complete with hardwares, PA rods etc. forQuad Moose ( suitable for 2x14 nos. 160 KN insulators. sets 204 204

cQuad Tension strings complete with hardware fittings for Quad Moose( suitable for 4x15 nos. 160 KN insulators. sets 516 516

dQuad Tension strings complete with hardware fittings for Quad Moose( suitable for 4x17 nos. 160 KN insulators. sets 246 246

eQuad Tension strings complete with hardware fittings for Quad Moose( suitable for 4x18 nos. 160 KN insulators. sets 366 366

fQuad Tension strings complete with hardware fittings for AACSR QuadMoose ( suitable for 4x18 nos. 210 KN insulators. sets 1 1

Insulator 's Hardwares fitting with all attachment assemblies and arcing horns all complete

Standard Disc Insulators

Schedule 1

Page 13 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8


Qty




Total CIP site, US$

4.4.2 Hardware fittings for Twin Moose tower

gSingle suspension Pilot Insulators String complete with hardwares, PArods etc. ( suitable for 1x15 nos. 90 KN insulators) sets 24 24

hDouble suspension strings complete with hardwares, PA rods etc. (suitable for 2x14 nos. 90 KN insulators. sets 12 12

iDouble tension strings complete with hardware fittings ( suitable for2x15 nos. 160 KN insulators. sets 336 336

jDouble tension strings complete with hardware fittings ( suitable for2x17 nos. 160 KN insulators. sets 192 192

kDouble tension strings complete with hardware fittings ( suitable for2x18 nos. 160 KN insulators. sets 174 174

lTwin Tension strings complete with hardware fittings for AACSR TwinMoose (suitable for 2x18 nos. 210 KN insulators. sets 1 1

Schedule 1

Page 14 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8


Qty




Total CIP site, US$

4.5

4.5.1 Accessories for Quad Moose Conductor

aBundle spacer cum damper for line, suitable for Quad ACSR Moose Conductor Nos.

4884 4884

bBundle spacer cum damper for line, suitable for Quad AACSR Moose Conductor Nos.

264 264

c Rigid Spacer for jumper for Quad ACSR Moose Conductor Nos. 1861 1861

d Rigid Spacer for jumper for twin AACSR Moose Conductor Nos. 20 20

e Mid Span Compression Joint for Quad ACSR Moose Conductor Nos.326 326

f Mid Span Compression Joint for Quad AACSR Moose Conductor Nos.3 3

g Repair Sleeve for Quad ACSR Moose Conductor Nos. 110 110

h Repair Sleeve for Quad AACSR Moose Conductor 11 11

Conductor's Accessories

Schedule 1

Page 15 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8


Qty




Total CIP site, US$

4.5.1 Accessories for Twin Moose Conductor

a Vibration Damper for ACSR Moose Conductor Nos. 3194 3194

b Vibration Damper for AACSR Moose Conductor Nos. 40 40

c Bundle spacer for line, suitable for Twin ACSR Moose Conductor Nos.2178 2178

d Bundle spacer for line, suitable for Twin AACSR Moose Conductor Nos.264 264

e Rigid Spacer for jumper for Twin ACSR Moose Conductor Nos. 965 965

f Rigid Spacer for jumper for twin AACSR Moose Conductor Nos.20 20

g Mid Span Compression Joint for Twin ACSR Moose Conductor Nos.145 145

h Mid Span Compression Joint for Twin AACSR Moose Conductor Nos.7 7

i Repair Sleeve for Twin ACSR Moose Conductor Nos. 55 55

j Repair Sleeve for Twin AACSR Moose Conductor 11 11

Schedule 1

Page 16 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8


Qty




Total CIP site, US$

4.6

a Cable Accessories Joint boxes Nos. 59 59

b Vibration Damper for OPGW Nos. 1658 1658

c OPGW Tension clamp complete with all fittings Nos. 671 671

d OPGW Suspension clamp complete with all fittings Nos. 79 79

Place: Signature: ____________________________

Date: Printed Name: ____________________________

Designation: ____________________________

Common Seal: ____________________________

Sub Total of (4)

OPGW hardware Acessories with all cable fittings, earthing clamp, down lead clamps, in-line splice encloser complete

TOTAL ( Sub total 1+Sub total 2+ Sub total 3+sub total 4) to Schedule No. 5. Grand Summary

Schedule 4

Page 1 of 16

Price Schedule No.2. Plant and Equipment (Including Mandatory Spares Parts) Supplied within Employer's country

For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10

1.0

1.1

a) Super Structure

i) DA + 0 M Standrad Towers No. 68 1 69








Qty

Guaranted weight ( Kg)

Total Weight ( Kg)

Unit rate per Kg EXW( in USD)

Total EXW Price, US$

Design, Fabrication, galvanising & supply of various types of towers & tower parts, tower/leg extensions (complete) including stubs, step bolts and bolts & nuts , hangers, D-Shackles, pack washers ( 220 kV Double Circuit Quad Moose Tower for Inaruwa-Basantapur Section)

Suspension Towers (DA (q) type) 0°-2°

Schedule 4

Page 2 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)



1.2

a) Super Structure

i) DB + 0 M Standrad Towers No. 166 1 167





1.3

a) Super Structure






Small angle (DB (q) type) tension towers (2°-15°)

Medium angle (DC (q) type) tension towers (16°-30°)

Schedule 4

Page 3 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)



1.4

a) Super Structure

i) DD + 0 M Standrad Towers No. 13 1 14





Set 13 13

1.5



Large Angle (DD (q) type) tension towers (30°-60°)/ Dead-end towers

Special Tower (including design, fabrication, galvanising, complete with nuts, bolts & washers etc.)

Schedule 4

Page 4 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)



1.6

a)DA (q) type of towers for al type of +3m,+6m, +9m body extensions


10 10


5 5


2 2

b)DB ( q)type of towers for al type of +3m,+6m, +9m body extensions


50 50


25 25


12 12

Hill Side leg extension applicable for all type of towers

Schedule 4

Page 5 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)



c)DC (q) type of towers for al type of +3m,+6m, +9m body extensions

c.1 +1.5 M Leg extensionNos.

4 4

c.2 +3 M Leg extensionNos.

2 2


d)DD (q) type of towers for al type of +3m,+6m, +9m body extensions

0

d.1 +1.5 M Leg extension Nos. 5 5

d.2 +3 M Leg extension Nos. 3 3

d.3 +4.5 M Leg extensionNos.

2 2

1.7

Tower Materials for strengthening of towers where weight spans are excedding the Limits (applicable for DB (q), DC(q) and DD(q) type of towers with all extensions )

MT 50 50

Sub Total 1

Schedule 4

Page 6 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)



2.0

2.1

a) Super Structure

i) DA(t) + 0 M Standrad Towers No. 4 1 5

ii) + 3.0 M Body Extension No. 1 - 1

iii) + 6.0 M Body Extension No. 1 - 1



2.2

a) Super Structure

i) DB(t) + 0 M Standrad Towers No. 100 1 101





Design, Fabrication, galvanising & supply of various types of towers & tower parts, tower/leg extensions (complete) including stubs, step bolts and bolts & nuts , hangers, D-Shackles, pack washers ( 220 kV Double Circuit Twin Moose Tower for Basantapur-Tumlingtar Section)

Suspension Towers (DA(t) type) 0°-2°

Small angle (DB(t) type) tension towers (2°-15°)

Schedule 4

Page 7 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)



2.3

a) Super Structure






2.4

a) Super Structure

i) DD(t) + 0 M Standrad Towers No. 8 1 9





Set 8 8

Medium angle (DC(t) type) tension towers (16°-30°)

Large Angle (DD(t) type) tension towers (30°-60°)/ Dead-end towers

Schedule 4

Page 8 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)



2.5



2.6

a)DB (t) type of towers for al type of +3m,+6m, +9m body extensions


30 30


15 15


7 7

b)DC(t) type of towers for al type of +3m,+6m, +9m body extensions


5 5

b.2 +3 M Leg extension Nos. 3 3

b.3 +4.5 M Leg extension Nos. 2 2

Special Tower (including design, fabrication, galvanising, complete with nuts, bolts & washers etc.)

Hill Side leg extension applicable for all type of towers

Schedule 4

Page 9 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8 10 11=9x10




Qty


Total Weight ( Kg)



c)DD (t) type of towers for al type of +3m,+6m, +9m body extensions

0


c.2 +3 M Leg extension Nos. 2 2


2.7

Tower Materials for strengthening of towers where weight spans are excedding the Limits (applicable for DB(t), DC(t) and DD(t) type of towers with all extensions )

MT 15 15

Sub Total 2

Schedule 1

Page 10 of 16

Price Schedule No.2. Plant and Equipment (Including Mandatory Spares Parts) Supplied from within Employer's country

For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8

3.0

3.1a Danger Plate Nos. 377 377b Number Plate Nos. 377 377c Anti Climbing Device

c.1 Suspension DA type of towers Set 72 72c.2 Small angle DB type of towers Set 266 266c.3 Medium angle DC type of towers Set 18 18c.4 Large angele DD type of towers Set 21 21c.5 Special Towers set 4 4

d Phase Plate (Set of 6) Sets 377 377e Circuit Plate (Set of 2) Sets 377 377f Aviation signal Sets 5 5g Bird Guards Sets 72 72




Qty

EXW Unit Price US$ Total EXW Price, US$

Design, manufacture and Supply of Tower Accessories & Earthing

Tower Accessories complete

Schedule 1

Page 11 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8




Qty


3.2

aPipe Type earthing complete with pipe, flat, salt, sand & charcoal.

Nos.183 183

b Counterpoise Type 0i) Counterpoise Type-30 m Nos. 63 63ii) Counterpoise Type-45m Nos. 67 67iii) Counterpoise Type-60m Nos. 64 64

4.04.1

a ACSR MOOSE Conductor Km 1140 1140

b AACSR MOOSE Conductor Km 20 20

4.2

aOPGW Fibre Optic Cable- 24 Fibre (DWSM) including Approach Fibre Cable

Km113 113

Earthing of Towers with necessary bolts, nuts & washers

Sub Total of 3

Design, manufacture and Supply of following Line Materials

Conductor

OPGW

Schedule 1

Page 12 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8




Qty


4.3

a 90 KN Disc Insulators Nos. 1,866 1,866

b 160 kN Disc Insulator Nos. 101,976 101,976

c 210 kN Disc Insulator Nos. 648 648

4.4

4.4.1 Hardware fittings for Quad Moose tower

aDouble suspension Pilot Insulators String complete with hardwares, PArods etc. ( suitable for 2x15 nos. 90 KN insulators) sets 39 39

bDouble suspension strings complete with hardwares, PA rods etc. forQuad Moose ( suitable for 2x14 nos. 160 KN insulators. sets 204 204

cQuad Tension strings complete with hardware fittings for Quad Moose( suitable for 4x15 nos. 160 KN insulators. sets 516 516

dQuad Tension strings complete with hardware fittings for Quad Moose( suitable for 4x17 nos. 160 KN insulators. sets 246 246

eQuad Tension strings complete with hardware fittings for Quad Moose( suitable for 4x18 nos. 160 KN insulators. sets 366 366

fQuad Tension strings complete with hardware fittings for AACSR QuadMoose ( suitable for 4x18 nos. 210 KN insulators. sets 1 1

Standard Disc Insulators

Insulator 's Hardwares fitting with all attachment assemblies and arcing horns all complete

Schedule 1

Page 13 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8




Qty


4.4.2 Hardware fittings for Twin Moose tower

gSingle suspension Pilot Insulators String complete with hardwares, PArods etc. ( suitable for 1x15 nos. 90 KN insulators) sets 24 24

hDouble suspension strings complete with hardwares, PA rods etc. (suitable for 2x14 nos. 90 KN insulators. sets 12 12

iDouble tension strings complete with hardware fittings ( suitable for2x15 nos. 160 KN insulators. sets 336 336

jDouble tension strings complete with hardware fittings ( suitable for2x17 nos. 160 KN insulators. sets 192 192

kDouble tension strings complete with hardware fittings ( suitable for2x18 nos. 160 KN insulators. sets 174 174

lTwin Tension strings complete with hardware fittings for AACSR TwinMoose (suitable for 2x18 nos. 210 KN insulators. sets 1 1

Schedule 1

Page 14 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8




Qty


4.5

4.5.1 Accessories for Quad Moose Conductor

aBundle spacer cum damper for line, suitable for Quad ACSR Moose Conductor Nos.

4884 4884

bBundle spacer cum damper for line, suitable for Quad AACSR Moose Conductor Nos.

264 264

c Rigid Spacer for jumper for Quad ACSR Moose Conductor Nos. 1861 1861

d Rigid Spacer for jumper for twin AACSR Moose Conductor Nos. 20 20

e Mid Span Compression Joint for Quad ACSR Moose Conductor Nos.326 326

f Mid Span Compression Joint for Quad AACSR Moose Conductor Nos.3 3

g Repair Sleeve for Quad ACSR Moose Conductor Nos. 110 110

h Repair Sleeve for Quad AACSR Moose Conductor 11 11

Conductor's Accessories

Schedule 1

Page 15 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8




Qty


4.5.1 Accessories for Twin Moose Conductor

a Vibration Damper for ACSR Moose Conductor Nos. 3194 3194

b Vibration Damper for AACSR Moose Conductor Nos. 40 40

c Bundle spacer for line, suitable for Twin ACSR Moose Conductor Nos.2178 2178

d Bundle spacer for line, suitable for Twin AACSR Moose Conductor Nos.264 264

e Rigid Spacer for jumper for Twin ACSR Moose Conductor Nos.965 965

f Rigid Spacer for jumper for twin AACSR Moose Conductor Nos.20 20

g Mid Span Compression Joint for Twin ACSR Moose Conductor Nos.145 145

h Mid Span Compression Joint for Twin AACSR Moose Conductor Nos.7 7

i Repair Sleeve for Twin ACSR Moose Conductor Nos. 55 55

j Repair Sleeve for Twin AACSR Moose Conductor 11 11

Schedule 1

Page 16 of 16


For Construction

Spares Total

1 2 4 5 6 7 8 9=7x8




Qty


4.6

a Cable Accessories Joint boxes Nos. 59 59

b Vibration Damper for OPGW Nos. 1658 1658

c OPGW Tension clamp complete with all fittings Nos. 671 671

d OPGW Suspension clamp complete with all fittings Nos. 79 79

Place: Signature: ____________________________


Designation: ____________________________

Common Seal: ____________________________

OPGW hardware Acessories with all cable fittings, earthing clamp, down lead clamps, in-line splice encloser complete

Sub Total of (4)

TOTAL ( Sub total 1+Sub total 2+ Sub total 3+sub total 4) to Schedule No. 5. Grand Summary

Schedule 3

Page 1 of 2

Price Schedule No. 3: Design Services and Prototype Testing

Item Description Unit Qty. Unit Price (US$) Total Price (US$)

(1) (2) (3) 4 (5)=(4)x(3)

1Design, Proto Assembly and Testing of Towers with +9.0 m Body Extension at various Design Loads andthen up to destruction as per specification including the cost of materials after allowing rebate for scrapvalue of steel of destroyed tower.

1.1 Small Angle 'DA(t)' Type Tension Towers (00-20) with +9.0m Body Extension No. 1

1.2 Small Angle 'DB(t)' Type Tension Towers (20-150) with +9.0m Body Extension No. 1

1.3 Medium Angle 'DC(t)' Type Tension Towers (150-300) with +9.0m Body Extension No. 1

1.4 Large Angle 'DD(t)' Type Tension Towers (300-600) with +9.0m Body Extension No. 1

2 Insulators' string as per specifications

2.1 Suspension String Assembly (Double & Single Pilot insulator String) Set 1

2.2 Tension String assembly (Double) Set 1

3 Pile uplift/compression test till failure as per specifications No. 1


The scope of the Contract covers the detail design of the different type of towers under the scope and their foundation design as well. The Scope also covers the Proto type testing of differenttype of Towers for +9m extension and that of Insulator string. The price of the detail design is deemed to have been covered in the prices of the other schedules. So the contractor shall not berequired to show the breakdown of the prices in this schedule. Accordingly no separate payment shall be made for the design Services.

Design, Supply and Construction of Inaruwa-Basantapur-Baneshwar-Tumlingtar Transmission Line Koshi Corridor 220 kV Transmission Line Project

Schedule 3

Page 2 of 2

4Design, Proto Assembly and Testing of Towers with +9.0 m Body Extension at various Design Loads andthen up to destruction as per specifications including the cost of materials after allowing rebate for scrapvalue of steel of destroyed tower.

4.1 Small Angle 'DA(q)' Type Tension Towers (00-20) with +9.0m Body Extension No. 1

4.2 Small Angle 'DB(q)' Type Tension Towers (20-150) with +9.0m Body Extension No. 1

4.3 Medium Angle 'DC(q)' Type Tension Towers (150-300) with +9.0m Body Extension No. 1

4.4 Large Angle 'DD(q)' Type Tension Towers (300-600) with +9.0m Body Extension No. 1

5 Insulators' string as per specifications5.1 Suspension String Assembly (Double & Double Pilot insulator String) Set 15.1 Tension String assembly (Quad) Set 16 Pile uplift/compression test till failure as per specifications No. 1

TOTAL to Schedule No. 5. Grand Summary

Place: Signature: ____________________________


Designation: ____________________________

Common Seal: ____________________________

Schedule 4

Page 1 of 28

Price Shedule No. 4 Construction and Installation Work

No. DescriptionUnit Quantity

Unit Price (USD) Total Price (USD)

1.0 2 3 4 5 6=4x5

1.0 Survey, check survey, tree enemuration, bush ccutting etc as per specifications

aDeatiled survey, Profiling & tower spotting, optimisation of tower including associated works as per specifications

Km 107

bCheck survey, pegging of tower centres, pit marking at site etc including all associatedworks viz reading levels at tower locations for the purpoe of leg extension, earthwork asper specifications

Km 107

c

Cadastral survey including the identification of all the land plot for tower foundation, landplot along the ROW for the purpose of paying compensation, Tree enemureation, Bushcutting other than the tree cutting in the forest including all associated works as perspecifications

LS 1

Sub Total of (1)


Koshi Corridor 220 kV Transmission Line Project Design, Supply and Construction of Inaruwa-Basantapur-Baneshwar-tumlingtar Transmission Line

Schedule 4


No. DescriptionUnit Quantity

Unit Price (USD) Total Price (USD)

1.0 2 3 4 5 6=4x5

Nepal Electricity Authority

Transmission Directorate

Koshi Corridor 220 kV Transmission Line Project

Design, Supply and Construction of Inaruwa-Basantapur-Baneshwar-tumlingtar Transmission Line

2.0 Geotechnical Investigation including all associated works as per specifications

a

Geotechnical Investigation at designated tower locations for all type of soils including

fissured rock and Hard rock upto a depth of 12 m below ground level or 1.5 times the

width of foundation below foundation level whichever is more and conducting SPT tests,

Vane shear tests, collection of disturbed and undisturbed soil samples from various

depths including conducting all necessary laboratory tests on soil samples etc and

preparation of Geotechnical Investigation Report at each tower location complete as per

specification.

Loc. 95

b

Geotechnical Investigation at tower locations for all type of soils including fissured/hard

rock where pile foundation are to be provided upto a depth of 40 m below ground level

and conducted SPT tests, collection of disturbed and undisturbed soil samples from

various depths including conducting all necessary laboratory tests on soil/rock samples

etc and preparation of Geotechnical Investigation Report at each tower location complete

as per specification.

Loc. 15

Sub Total of (2) -

3.0 Measurement of soil resistivity/ ground resistance as per specifications Loc. 377

Sub Total of (3) -

Page 2 of 28

Schedule 4

Page 3 of 28

Price Shedule No. 4 Construction and Installation WorkNo. Description Unit Quantity Unit Guaranted

VolumeTotal Volume Unit Price (USD) Total Price (USD)

1 2 3 4 5 6=Tower no in column 4 x5

7 8=6x7

4.0

4.1 Setting of stubs

a Tower Type DA (q) Set 68

b Tower Type DB(q) Set 166

c Tower Type DC(q) Set 9

d Tower Type DD(q) Set 13

e Special Tower Set 2

4.2 Tower Type DA (q) 68

4.2.1Normal Dry soil

No 23

(a) Excavation m3

(b) M20 Lean Concrete Nominal Mix 1:1.5:3 m3

(c) M10 Lean Concrete Nominal Mix 1:3:6 m3

(d) Supply and placement of Reinforcement Steel Kg

4.2.2Wet type soil

No 10

(a) Excavation m3





Koshi Corridor 220 kV Transmission Line Project Design, Supply and Construction of Inaruwa-Basantapur-Baneshwar-Tumlingtar 220 kV Transmission Line

All the complete Work associated with construction of tower foundations including stub setting for all type of soil as below (Quad Moose D/C Tower) as per specifications

-

-

Schedule 4

Page 4 of 28





4.2.3 Partially submerged type soil No 2

(a) Excavation m3




4.2.4 Fully submerged type No 2

(a) Excavation m3




4.2.5 Dry Fissured Rock No 15 -

(a) Excavation m3




4.2.6 Wet Fissured Rock No 10 -

(a) Excavation m3




Schedule 4

Page 5 of 28





4.2.7 Hard Rock type No 5 - (a) Excavation m3




4.2.8 Sandy soil No 1 -

(a) Excavation m3




4.3 Tower Type DB (q) 166

4.3.1 Normal Dry soil No 50

(a) Excavation m3




4.3.2 Wet type soil No 10

(a) Excavation m3




-

-

Schedule 4

Page 6 of 28






(a) Excavation m3





(a) Excavation m3




4.3.5 Dry Fissured Rock No 55

(a) Excavation m3




4.3.6 Wet Fissured Rock No 35

(a) Excavation m3




-

-

-

-

Schedule 4

Page 7 of 28





4.3.7 Rocky type No 8

(a) Excavation m3




4.3.8 Sandy soil No 2

(a) Excavation m3




4.4 Tower Type DC (q) 94.4.1 Normal Dry soil No 1

(a) Excavation m3





(a) Excavation m3




-

-

-

-

Schedule 4

Page 8 of 28






(a) Excavation m3





(a) Excavation m3





(a) Excavation m3





(a) Excavation m3




-

-

-

Schedule 4

Page 9 of 28






(a) Excavation m3





(a) Excavation m3




4.5 Tower Type DD/DDE(q) 114..1 Normal Dry soil No 1

(a) Excavation m3





(a) Excavation m3




-

-

-

-

Schedule 4

Page 10 of 28






(a) Excavation m3





(a) Excavation m3




4.5.5 Dry Fissured Rock No 3 -

(a) Excavation m3





(a) Excavation m3




-

-

-

Schedule 4

Page 11 of 28






(a) Excavation m3





(a) Excavation m3




4.6 Pile Foundation upto 30 meter depth (applicable for all type oftowers i.e. for DA, DB, DC & DD/DE)

No 4

Sub Total of (4) -

-

Schedule 4

Page 12 of 28





5.0

5.1 Setting of stubs

a Tower Type DA (t) Set 4

b Tower Type DB(t) Set 100

c Tower Type DC(t) Set 9

d Tower Type DD(t) Set 8

e Special Tower Set 2

5.2 Tower Type DA (t) 4


(a) Excavation m3





(a) Excavation m3




5.2.3 Partially submerged type soil No -

(a) Excavation m3

-

All the complete Work associated with construction of tower foundations including stub setting for all type of soil as below (Twin Moose D/C Tower) as per specifications

-

Schedule 4

Page 13 of 28









(a) Excavation m3





(a) Excavation m3





(a) Excavation m3




-

-

-

Schedule 4

Page 14 of 28





5.2.7 Hard Rock type No 0(a) Excavation m3





(a) Excavation m3




5.3 Tower Type DB (t) 1005.3.1 Normal Dry soil No 40

(a) Excavation m3





(a) Excavation m3




Schedule 4

Page 15 of 28






(a) Excavation m3





(a) Excavation m3





(a) Excavation m3





(a) Excavation m3




-

Schedule 4

Page 16 of 28






(a) Excavation m3





(a) Excavation m3



(d) Supply and placement of Reinforcement Steel Kg5.4 Tower Type DC (t) 9


(a) Excavation m3





(a) Excavation m3




-

-

-

-

Schedule 4

Page 17 of 28






(a) Excavation m3





(a) Excavation m3





(a) Excavation m3





(a) Excavation m3




-

-

-

Schedule 4

Page 18 of 28






(a) Excavation m3





(a) Excavation m3




5.5 Tower Type DD/DDE (t) 8


(a) Excavation m3





(a) Excavation m3




-

-

-

Schedule 4

Page 19 of 28






(a) Excavation m3





(a) Excavation m3





(a) Excavation m3





(a) Excavation m3




-

Schedule 4

Page 20 of 28






(a) Excavation m3





(a) Excavation m3




5.6 Pile Foundation upto 30 meter depth (applicable for all type oftowers i.e. for DA, DB, DC & DD/DE)

No 2

Sub Total of (5) -

Schedule 4

Page 21 of 28


No. Description Unit QuantityGuaranted

weight ( Kg)Total Weight

( Kg)

Unit Price of Installation (USD/Kg)

Total Price (USD)

1 2 3 4 5 6=4x5 7 8=6x7

6.1

6.1.1 Tower Type DAa DA+0 Extn. Type of towers Nos. 68

b DA+3m Extn. Type of towers Nos. 15

c DA+6m Extn. Type of towers Nos. 1

d DA+9m Extn. Type of towers Nos. 1

e +1.5 M Leg Extension No. 10f +3.0 M Leg Extension No. 5g +4.5 M Leg Extension No. 2

6.1.2 Tower Type DBa DB+0 Extn. Type towers Nos. 166b DB+3m Extn. Type towers Nos. 24c DB+6m Extn. Type towers Nos. 17d DB+9m Extn. Type towers Nos. 8e +1.5 M Leg Extension No. 50

f +3.0 M Leg Extension No. 25g +4.5 M Leg Extension No. 12


Koshi Corridor 220 kV Transmission Line Project

Erection of various types of towers, tower parts and its body & leg extensions (Complete) including bolts & nuts, steps bolts, hangers, D Shackles etc including tack welding and supply and application zinc rich primer and two coats of enamel paint ( 220 kV D/C Quad Moose Tower for Inaruwa -Basantapur Section)

Design, Supply and Construction of Inaruwa-Basantapur-Baneshwar-Tumlingtar 220 kV D/C Transmission Line

Schedule 4

Page 22 of 28




( Kg)


Total Price (USD)


Koshi Corridor 220 kV Transmission Line Project Design, Supply and Construction of Inaruwa-Basantapur-Baneshwar-Tumlingtar 220 kV D/C Transmission Line

6.1.3 Tower Type DCa DC+0 Extn. Type towers Nos. 9

b DC+3m Extn. Type towers Nos. 3

c DC+6m Extn. Type towers Nos. 1

d DC+9m Extn. Type towers Nos. 1

e +1.5 M Leg Extension No. 4

f +3.0 M Leg Extension No. 2

g +4.5 M Leg Extension No. 1

6.1.4 Tower Type DDa DD+0 Extn. Type towers Nos. 13

b DD+3m Extn. Type towers Nos. 2

c DD+6m Extn. Type towers Nos. 1

d DD+9m Extn. Type towers Nos. 1




Schedule 4

Page 23 of 28




( Kg)


Total Price (USD)



6.1.5 Installation of Special Towera Superstructure MT 100

6.1.6 Installation of Tower Materials for strengthening of towers where weight spans are excedding the Limits (applicable for DB (q), DC(q) and DD(q) type of towers with all extensions )

MT 50

Sub Total of (6.1) -

6.2

6.2.1 Tower Type DAa DA+0 Extn. Type of towers Nos. 4

b DA+3m Extn. Type of towers Nos. 1

c DA+6m Extn. Type of towers Nos. 1

d DA+9m Extn. Type of towers Nos. 1

e +1.5 M Leg Extension No. - f +3.0 M Leg Extension No. - g +4.5 M Leg Extension No. - h Setting of Stubs ( Set of 4) Set 4

Erection of various types of towers, tower parts and its body & leg extensions (Complete) including bolts & nuts, steps bolts, hangers, D Shackles etc including tack welding and supply and application zinc rich primer and two coats of enamel paint ( 220 kV D/C Twin Moose Tower for Basantapur-Tumlingtar Section)

Schedule 4

Page 24 of 28




( Kg)


Total Price (USD)



6.2.2 Tower Type DBa DB+0 Extn. Type towers Nos. 100

b DB+3m Extn. Type towers Nos. 5

c DB+6m Extn. Type towers Nos. 7

d DB+9m Extn. Type towers Nos. 8




h Setting of Stubs ( Set of 4) Set 1006.2.3 Tower Type DC

a DC+0 Extn. Type towers Nos. 9

b DC+3m Extn. Type towers Nos. 1

c DC+6m Extn. Type towers Nos. 1

d DC+9m Extn. Type towers Nos. 1




h Setting of Stubs ( Set of 4) Set 9

Schedule 4

Page 25 of 28




( Kg)


Total Price (USD)



6.2.4 Tower Type DDa

DD+0 Extn. Type towers Nos. 8

bDD+3m Extn. Type towers Nos. 1

cDD+6m Extn. Type towers Nos. 1

dDD+9m Extn. Type towers Nos. 1




h Setting of Stubs ( Set of 4) Set 86.2.5 Installation of Special Tower

a Superstructure MT 80b Stub setting (set of 4) MT 2

6.2.6 Installation of Tower Materials for strengthening of towers where weight spans are excedding the Limits (applicable for DB (q), DC(q) and DD(q) type of towers with all extensions )

MT 15

Sub Total of (6) -

Schedule 4

Page 26 of 28


No. Description Unit Quantity Unit Price (USD) Total Price (USD)

1 2 3 4 5 6=4x5

7.0

7.1 Tower Accessoriesa Danger Plate Nos. 377b Number Plate Nos. 377c Anti Climbing Device

c.1 Suspension DA type of towers Set 72c.2 Small angle DB type of towers Set 266c.3 Medium angle DC type of towers Set 18c.4 Large angele DD type of towers Set 21c.5 Special Towers set 4d Phase Plate (Set of 6) Sets 377

e Circuit Plate (Set of 2) Sets 377

f Aviation signal Sets 5g Bird Guards Sets 72

7.2 Installation of Tower Earthing Material

a Pipe Type earthing complete with pipe, flat, salt, sand & charcoal. Nos. 183

b Counterpoise Typei) Counterpoise Type-30 m Sets 63 ii) Counterpoise Type-45m Sets 67 iii) Counterpoise Type-60m Sets 64

Sub Total of (7)



Installation of Tower Accessories & Earthing

Schedule 4

Page 27 of 28





8.0 Stringign of Conductor, OPGW complete with Line Materials

8.1

a Single circuit with ACSR Quad Moose conductor km 74

b Single circuit with AACSR Quadoose conductor for long valley/river crossing km 1

8.2

a Single circuit with ACSR Twin Moose conductor km 33

b Single circuit with AACSR Twin Moose conductor for long valley/river crossing km 1

8.3

a Steel Ground Wire with Optical fibre(OPGW)-24 Fibre km 107

Sub Total of (8) -

9.0

a Random rubble stone masonry including excavation (1:5 cement : concrete) CUM 15,000.00

b Stone bound in galvanizing wire netting including excavation CUM 10,000.00

c Back filling and levelling within revetment CUM 12,000.00

d M15 Conc. Nominal Mix 1:2:4 for top seal cover CUM 2,500.00

Sub Total of (9) -

Protection of tower footing including all the associated work complete for D/C Quad Moose Tower ( Inaruwa-Basantapur Section)

Stringing of Conductor including Installation of Insulator complete with arcing horns and necessary hardwares, fixing of conductor accessories ( 220 kV Twin Moose Single ckt stringing)

Stringing of Conductor including Installation of Insulator complete with arcing horns and necessary hardwares, fixing of conductor accessories ( 220 kV Quad Moose Single ckt stringing )

Stringing of OPGW including Installation of hardware Acessories with all cable fittings, earthing clamp, down lead clamps, in-line splice encloser complete ( Inaruwa-Basantapur-Tumlingtar Complete line)

Schedule 4

Page 28 of 28





10.0

a Random rubble stone masonry including excavation (1:5 cement : concrete) CUM 5,000.00

b Stone bound in galvanizing wire netting including excavation CUM 4,000.00

c Back filling and levelling within revetment CUM 5,000.00

d M15 Conc. Nominal Mix 1:2:4 for top seal cover CUM 400.00

Sub Total of (10) - Total ( Sub Total 1+ ……………..+ sub total 10) to Schedule No. 5. Grand Summary

Place: Signature: ____________________________


Designation: ____________________________

Common Seal: ____________________________

Protection of tower footing including all the associated work complete for D/C Twin Moose Tower (Basantapur-Tumlingtar Section)

Schedule 6

Page 1 of 1

Price Schedule No.6. Unit rates for the Supply and Installation of Galvanized Earthwire and accessories


1.0 2 3 4 5 6=4x5

(a)

a.1 GS Earth Wire 7/3.66 mm Size Km 1a.2 GS Earth Wire 7/4.5 mm Size Km 1a.3 Flexible Copper Bond for 7/3.66 mm GS Earthwire Nos. 1a.4 Flexible Copper Bond for 7/4.5 mm GS Earthwire Nos. 1a.5 Vibration Damper for 7/3.66 mm GS Earthwire Nos. 1a.6 Vibration Damper for 7/4.5 mm GS Earthwire Nos. 1a.7 MId Span Compression Joint for 7/3.66 mm GS Earthwire Nos. 1a.8 Mid Span Compression Joint for7/4.5 mm GS Earthwire Nos. 1a.9 Tension Clamp for 7/3.66 mm GS Earthwire Sets 1

a.10 Tension Clamp for 7/4.5 mm GS Earthwire Sets 1a.11 Suspension Clamp for 7/3.66 mm GS Earthwire Sets 1

a.12 Suspension Clamp for 7/4.5 mm GS Earthwire Sets 1

a.13 Repair Sleeve for 7/3.66 mm GS Earthwire Nos. 1

a.14 Repair Sleeve for 7/4.5 mm GS Earthwire Nos. 1Sub total (a)

b Stringing of Earthwire including Installation of all hardware complete and earthwire accessoriesb.1 G.S. Earth wire 7/3.66 mm Km 1 b.2 G.S. Earth wire 7/4.5 mm for long valley/river crossing Km 1

Sub total (b)

Place: Signature: ____________________________


Designation: ____________________________

Common Seal: ____________________________

Design, manufacture and Supply of Galvanized Steel Earthwire

Design, Supply and Construction of Inaruwa-Basantapur-Baneshwar-Tumlingtar 220 kV D/C Transmission Line Koshi Corridor 220 kV Transmission Line Project


IFB No: KOSHI/NEA/71/72 - 1 Part I: Section IV A: The … No: KOSHI/NEA/71/72 - 1 Koshi Corridor...

Documents

Transcript of IFB No: KOSHI/NEA/71/72 - 1 Part I: Section IV A: The … No: KOSHI/NEA/71/72 - 1 Koshi Corridor...