IDTB07 report
-
Upload
clarissa-verne -
Category
Documents
-
view
22 -
download
0
description
Transcript of IDTB07 report
![Page 1: IDTB07 report](https://reader035.fdocuments.net/reader035/viewer/2022062721/568135c1550346895d9d2317/html5/thumbnails/1.jpg)
IDTB07 reporthttps://conferences.fnal.gov/idtb07/
2007/01/23, GLDCAL meetingK. Kawagoe (Kobe U)
![Page 2: IDTB07 report](https://reader035.fdocuments.net/reader035/viewer/2022062721/568135c1550346895d9d2317/html5/thumbnails/2.jpg)
(Extruded Mega-strip under development)
![Page 3: IDTB07 report](https://reader035.fdocuments.net/reader035/viewer/2022062721/568135c1550346895d9d2317/html5/thumbnails/3.jpg)
Light yield~ 21 p.e.
WLSF readout Direct readout
Light yield~ 13 p.e.
Trigger
-ray source (90Sr) Strip size : 1 cm x 4.5 cm x 3 mmcovered with reflector film
collimatorBias voltage : V0 + 2.1 VTemperature : 25 oC
Signal from scintillator strips (@Shinshu-U)
Question: 94.5/347.9=0.27, 55.63/253.4=0.21. If this is true, direct readout is better in uniformity ??
![Page 4: IDTB07 report](https://reader035.fdocuments.net/reader035/viewer/2022062721/568135c1550346895d9d2317/html5/thumbnails/4.jpg)
Comments on Fermilab TB facility• Our experience of MTBF in 1999
– No Cherenkov counters. Only SRD (synchrotron radiation detector) could be used for electron ID.
– We had to bring our own drift chambers to measure the incident position.– Suffered from electric noise in the PMT signals, whose origin could not be identifi
ed.– Suffered from multi-particle events due materials in the beam.
• Now we have– Gas Cherenkov counters and beamline TOF for particle ID– Tracking with MWPCs, a pixel station, and SciFi detectors.– Less material in the beam.Great improvements. Thanks a lot !!
• For stable MPPC operation– Hope stable temperature at the experimental hall: MPPC is sensitive to temperatu
re – Hope to have less electric noise than our 1999 TB.
![Page 5: IDTB07 report](https://reader035.fdocuments.net/reader035/viewer/2022062721/568135c1550346895d9d2317/html5/thumbnails/5.jpg)
Support for DESY TB from CALICE
• LED driver, monitoring system (CAN)– Ivo Polak (Prague)
• DAQ, online monitoring– Georgios MAVROMANOLAKIS (Cambridge U
niversity/FNAL)
• Data analysis, GRID– Roman Poeschl (LAL)