Identica Vascular Biometrics

Hand Vascular Pattern Recognition (HVPR)Hand Vascular Pattern Recognition (HVPR)Hand Vascular Pattern Recognition (HVPR)Hand Vascular Pattern Recognition (HVPR)

VP-II XVP-II XHand Vascular Pattern Recognition (HVPR)Hand Vascular Pattern Recognition (HVPR)

Presented byAyal VogelExecutive Vice President of Global SalesIdentica Holdings CorporationJuly 30, 2009

www.identicacorp.comwww.identicacorp.com


VP-II X Specification Overview

VP-II X is a biometric scanner which verifies users individually unique vascular patterns extracted

from the hypoderm below the surface of the skin of the back of the hand using an infra-red based

sensor device.

| Utilized Technology: HVPR (Hand Vascular Pattern Recognition)

| Usability: 99.98%

| Accuracy: FAR: 0.0001%, FRR: 0.1%

| Verification Speed: 0.4 sec / person

| Hardware OverviewHardware Overview Dual CPUs (400MHz DSP, 180Mhz ARM Processor) 65K Color 2.8” TFT LCD / 16 Keys / IR Sensor / Speaker TCP/IP Ethernet, Wiegand In/Out, Serial ports, Digital I/O, USB 2.0 512MByte NAND Flash Memory (Up to 50,000 users and 500,000 logs) Built-in card reader module & antenna (125Khz Prox. card / 13.5Mhz Smart card)


Raw Image

Extracted Vascular Pattern

Hand vascular extracting processing flow

Adaptive algorithm

Binary image

Noise removal

algorithm

Advantages of Hand Vascular Pattern Uniqueness - Even twins’ hands are different Stability - No changes over long period Excellent accuracy over long period Large scale features - High performance even

with scars and contamination

Advantages of VP-II X HCD (Human Criteria Decision) algorithm Vascular Pattern not visible – Eliminate spoofing Harsh environmental robustness User privacy protected Excellent user perception and convenience

Vascular Biometrics


Technology

VP-II HVPR

Fingerprint

Hand Geometry

IRIS

Advantages/Disadvantages

√ Non-contacting Sensor

√ High Usability & Accuracy√ Non-Intrusive/User Privacy

√ Small size applicationsX Low UsabilityX Difficulty in use with a

physical damages like scars.

√ High UsabilityX Low Accuracy (High FAR) X Hygienic problem by

physical contact

√ High AccuracyX Difficulty in use with small

eyes like oriental users.X User inconvenient by eye

positioning (intrusive)

Advantages over finger scanners

Better usability

: 5% of adults can’t use finger scanners

More robust to environment

: Contamination, Humidity

More secure against forgery

: Spoofing, Copy of residuals

Better accuracy

Sensor cleaning not required

: No physical contact to the sensor

More robust to physical feature damage

: Scars, wear

No privacy concerns to the users

Technology comparison

Biometrics Technology Comparison


Performance Usability Accuracy – FAR / FRR Enrollment / Verification Speed (throughput)

Robust Poor environment - contamination / humidity Physical feature damages – scars / wear

Ease of setup and maintenance

User convenience User perception Hygiene problems Non-invasive

Easy to use Integrated networking User Interface and management

No privacy concerns

General Factors in Choosing biometrics

Useable for whole population (user group)

It is known that more than 5% of the adult population cannot use fingerprint systems. This is mainly due to the absence or weakness of their fingerprints. About 2% of people do not have proper fingerprints, and many people who use their hands intensively for work generate a very weak signal to fingerprint scanners. The VP-II provides 99.98% usability, which means almost all of the general population can use the system without any problems.

Does not leave a trace of residual features after use

If a biometric system leaves residual features after physical contact, the features would be easily duplicated and/or forged. It is known that fraudulent fingerprints can be easily made by the residual fingerprint on the surface of the sensor.

Be able to reject non-human features from enrollment

Non-human features should not be allowed to be enrolled by a biometric, for it to be considered a true biometric system. VP-II recognizes non-human features at enrollment.

Biometric systems should be:

Biometrics Systems


VP-II X Functions

| Basic functionsBasic functions

Administration Test Mode – Factory set to allow an installer to setup the system initially Managers – Administrator, Enroll/Delete users, System setup

Enrollment / Verification Users can be enrolled with a PIN, Proximity card or Smart card HID iCLASS, Mifare, DESFire, PIV, TWIC cards supported (Built-in card reader) Password or Bypass users can be assigned (Without verifying vascular patterns) Up to 50,000 users supported Up to 2 templates per user allowed, i.e., Right and Left hand

Event & Logs Stores up to 500,000 access events and system logs

Time and attendance 4 function keys – Programmable for attendance, leave, job transfer, etc Customized firmware to be provided for high-level time and attendance solutions

Firmware field upgrade


VP-II X Functions

| NetworkingNetworking

TCP/IP network (10/100 Mbps Ethernet) DHCP or Static IP supported Each VP-II X stores all user information (timezone,

access area, etc) in internal memory along with vascular

data – Can fully function when network is not

connected.

IONcontrol-X (Server Application Software) Provides access control and time & attendance

functions VP-II X can run with or without IONcontrol-X

Database Management Master/Slave operation – All user data is automatically

distributed by the Master VP-II X to all Slaves in the network Database backup and recovery function by network or by using

USB memory port


VP-II X Functions

| Access control functionsAccess control functions

Timezone and Access area control Up to 200 timezone/holiday tables Timezone and/or Access area control per users and/or units

Relay output, Door status

monitoring, Remote open,

Exit button Automatic door release

when a fire-alarm detected

(Optional by a digital input

port)

Electric door lock controller VP-II XG (Optional) A separate controller (VP-II XG) to be installed at

a secure place (inside the door) Serial communication between X and XG

(Optional use of RS485)


VP-II X Functions

| Access control functionsAccess control functions

Interface to an ACU (Access Control Unit) Up to 128bit Wiegand output to PACS Digital In/Out ports Clock & Data output (Optional)

Interface to internal/external card readers (CR) Up to 128bit Wiegand input from an existing

external card reader Clock & Data input for Magnetic card reader Optional built in Card Readers: 125 MHz Prox,

Smart Card Readers including: iCLASS, Mifare,

DESFire, PIV, TWIC

Tamper-proof Security screw applied Tamper switch installed on the rear cover –

Alarm and/or report to a server


VP-II X Functions

| User interfaceUser interface Display and Keypad

User friendly GUI with color TFT LCD Multi-language capability Programmable function keys, Keypad enable/disable

function Backlight for keypad and LCD

Other Adjustable sound/beep User detection with an IR sensor RTC (Real Time Clock), Time/Date synchronization with

a time-server

Logo replacement Customized logo offered upon business agreement


VP-II X/VP-II S Comparison

| Improved Biometric PerformanceImproved Biometric Performance

No light interference from 0 to 20,000 LUX, unlike limited range of other biometric

modalities

Widened hand viewing area – Extracts more vascular features

Less sensitivity in positioning hand Minimize user training effort Lower FRR

Enhanced Sensor Two templates per userImproved Algorithm

| Controller Built-in ScannerController Built-in Scanner

Card module & Antenna (125Khz/13.56Mhz) built-in HID MCM module for Proximity / OEM50 module for iCLASS GemProx module for Mifare, DESfire, TWIC and PIV

Controller functions Internal database memory up to 50,000 users DB and 500,000 events/logs Direct network communications between VP-II X units and/or Server via TCP/IP

Simplified configuration & Easier installation


VP-II X/VP-II S Comparison (Cont.)

| Upgraded functionsUpgraded functions

External interface capability Extended PIN digits (From 8 to 24) Extended Wiegand in/out bits (From 48 to 128bit) Clock & Data interface added

Strong time and attendance capability 2.8” color TFT LCD for interactive user interface Programmable 4 functions keys for time and attendance use

Tamper-proof

OEM Capability Customer logo can be applied Flexible firmware customization

Identica Vascular Biometrics

Documents

Transcript of Identica Vascular Biometrics