Icom ip radio ppt
-
Upload
walkwireless -
Category
Technology
-
view
314 -
download
10
description
Transcript of Icom ip radio ppt
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
ICOM IP-100HIP RADIO SYSTEM
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
IP100H / IP1000C Wireless LAN based radio system
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
IP100FS IP1000CIP100H VE-PG3
The IP100H / IP1000C is the answer for multiple Question• It is license free as it uses Wireless LAN.(2.4/5GHz)
• Coverage can be expanded by addition of access points.
• The IP100H is a digital radio with advanced features.
• The IP1000C servers handles up to 1000 IP100H terminal radios.
• The IP100FS remote communicator offers Windows PC based dispatcher / virtual radio features. The VP-PG3 interconnects IP phone and other communication system.
SYSTEM SCHEMATIC
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
Frequency Band: 2.4 GHz / 5GHz License free by using Wireless LAN Access Points. Compatible with wireless LAN access points 802.11a/b/g. Coverage can be expanded by addition of Access points. Supports Encryption WEP 64/128bit, WPA-PSK/WPA2-PSK PTT ID/Alias List Simplex / Full Duplex Calls Simultaneous Calls Priority Calls (All > Individual > Group) Remote radio Kill / Un Kill. Radio Positioning on PC. Text Messaging(Preprogrammed) Status report on Radio dispatcher by the IP100FS . Battery Indicator & Low Alert OTAP(Over the Air Programming) Compact and light weight, IPx7 waterproof. Compression-less codec G.711 for the best voice quality.
IP- 100H/1000C Features
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
IP1000C works as the control server for IP100H terminals. Radio authentication, Voice traffic control, Radio programming over air (OTAP) etc. Setting like ID alias table, group call setting, programmable key
function, preset text message and status meaning are also updated. Even the wireless LAN AP information can be updated. Therefore, once radios are deployed, they will not be required to recall for programming.
No AP max. number limitation by IP1000C
IC-1000C Server
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
IP100FS PC virtual radio / dispatcher / simple AVL
Radio Dispatcher Simple AVL. Individual / Group/ All Call Radios are shown over user set map data. Status of radios can also be seen at a glance. Can send stun/kill/revive and auto TX command.
IP-100FS Features
SYSTEM SCHEMATIC
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
In case coverage is insufficient, simply add access points. Coverage can be expanded with off-the-shelf access points. (Icom recommends AP-90M Access Point).
IP1000C
APAP AP AP
SYSTEM SCHEMATIC
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
The IP100H works freely within the network of multiple access points (different channel with same SS ID, coverage overlapped). Radio users will not typically notice roaming gaps.
IP1000C
AP AP AP AP
SYSTEM SCHEMATIC
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
It is recommended to use AP-90M.
IP1000C
AP AP AP AP
SYSTEM SCHEMATIC
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
When VPN is used, radios can roam between different locations. There will be slight gap at roaming between sites.Note: The VPN link should satisfy the bandwidth requirement.
IP1000C
SR-VPN1
AP AP AP AP
SR-VPN1
AP AP AP AP
VPN
SYSTEM SCHEMATIC
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
The IP100H / IP1000C requirement:Wireless Access Points requirements• All of the wireless LAN access points must have the same SS ID
with the same encryption setting. (Note: Use “virtual AP function” to create new dedicated logical access points if different SS IDs are used.)
• Access points can be programmed for a channel in the 2.4GHz and 5GHz band. The IP100H automatically detect and use it. The 5GHz band is generally preferred for less interference for urban environment.
• Place access points working in different channel in slightly overlapped coverage and “maximum client number limit function” enabled so that an access point will not be overloaded with too many terminals.
• The Icom AP-90M access point is recommended.
• The RS-AP3 software allows monitoring of Icom AP status.
SYSTEM REQUIREMENTS
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
Interconnection with the IP phone / other radio systems:
Compatible with the VE-PG3• Use the RoIP device VE-PG3 to integrate with IP phone and other
radio systems such as IDAS(Icom Digital Advanced System).
• Allows calls between IP100H and IP Phone in full duplex.
• Connects also with IDAS (NXDN) system and other radio systems.
• The IP1000C connects to “bridge port” of the VE-PG3 working in converter mode (VE-PG3 working in bridge mode is not compatible).
• As the general requirement for IP phone system, SIP server is required.
• It is generally not permitted for license free radios to interconnect to any other external devices / systems but is no such limitations for the IP100H/IP1000C based systems.
SYSTEM SCHEMATIC
All specifications are subject to change without notice.All specifications are subject to change without notice.“STEP UP and GROW” with Icom
About “OTAP” feature:(over the air programming)
What can be updated over the air Firmware upgrade Access point SSID and encryption setting. Radio ID. Call List (individual / call groups) Status List Preset text messages Key setting, VOX setting, Simplex / full duplex setting
Over the Air Programming
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries
All trademarks are the properties of their respective owners
The content of this presentation is the copyright of Icom Inc. Do not copy or reprint without prior written approval from Icom Inc. Content is subject to change without notice or obligation
Walk Wireless Telecom SolutionsT – 41 / 3 B, National Sarvodaya School Lane, Chembur Colony, Mumbai – 400074
Tel: +91 9930434397
Tel: +919930434367
Email: [email protected]
Web: www.walkwireless.in