Ice Formwork: Digital Fabrication, Complex Geometry and
Transcript of Ice Formwork: Digital Fabrication, Complex Geometry and
![Page 1: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/1.jpg)
Ice Formwork: Digital Fabrication, Complex Geometry and High Performance Concrete
![Page 2: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/2.jpg)
Sitnikov, Vasily. Ice Formwork: The Rationale and Potential of Ice-Based Moulding Systems for the Production of Complex-Geometry Precast Con-crete. TRITA-ABE-DLT 2039. Diss. sammanfat-tning, Stockholm: Kungliga Tekniska högskolan, 2020.
![Page 3: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/3.jpg)
Table of Contents
ABSTRACT i
SVENSK SAMMANFATTNING v
ACKNOWLEDGEMENTS ix
Introduction 1 Theoretical Investigation and Definition of the Interdisciplinary Problem 2
Experimental Investigation and Empirical Knowledge Production 4
Research Method 7
PART 1The Multifaceted Problem of Concrete Design and Production 8 Prologue 11
Ecology of the Concrete Industry 17
Sustainable Development in the Building Sector 17
Life Cycle Assessment in the Construction Industry 21
High-Performance Concrete as a Sustainable Strategy 24
Retooling in the Concrete Industry 33
Technological Innovation in the Construction Industry 33
Concrete Industry and Digital Fabrication 36
Emerging Methods of Digital Concrete Fabrication 53
Principles of Sustainable Industrial Production 55
Experimental Research in Digital Prefabrication of UHPC 56
Section Conclusion 63
PART 2 The Ice Formwork Concept 66 Contribution and Significance 69
Methodology of Experimental Programme 73
Phase 0 – Thought Experiment 76
Phase 1 – Material Testing 82
Phase 2 – Design Probes and Production Prototyping 86
Controlled Melting Deformations 104
Digital Precision Processing 112
Fused Ice Aggregate Method 130
Phase 3 – Ecological Evaluation 140 Conclusion 145
TABLE OF SELECTED PROTOTYPES 148
SELECTED VIDEO DOCUMENTATIONS 156
SELECTED EXHIBITIONS OF THE PROTOTYPES 158
IMAGE CAPTIONS 160
BIBLIOGRAPHY 164
APPENDED PUBLICATIONS Appendix 1: Kinetics of UHPC Strength Gain at Subfreezing Temperatures 175
Appendix 2: Ice Formwork for Ultra-High Performance Concrete:
Simulation of Ice Melting Deformations. 185
Appendix 3: Ice Formwork for High-Performance Concrete:
A Model of Lean Production for Prefabricated Concrete Industry. 197
Appendix 4: Ice Formwork for Cast HPFRC Elements:
Process-Oriented Design of a Light-Weight High-Performance
Fiber-Reinforced Concrete (HPFRC) Rain-Screen Façade. 215
Appendix 5: All That Is Porous: Practicing Cross-Disciplinary Design Thinking 231
Appendix 6: Preliminary Assessment of Environmental Performance
of Ice Formwork Production Method for Irregular
Architectural Elements of Concrete 241
![Page 4: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/4.jpg)
Part 1
The Multifaceted Problem of
Concrete Design and Production
![Page 5: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/5.jpg)
FIG URE 1 . 2 Comparative charts of the global consumption rates and the environmental impact of the main concrete constituent materials. (Sources: Allwood and Cullen
2012; Hamond and Jones 2011; graphical representation: author).
1. Ecology of the Concrete Industry
Cement
Aggregate
Steel
Annual consumption
Embodied energy
Carbon footprint
Annual consumption
Embodied energy
Carbon footprint
Annual consumption
Embodied energy
Carbon footprint
2.8 Gt
13 EJ
2.3 GtCO2
19 Gt
4.7 EJ
0.26 GtCO2
0.27 Gt
6.6 EJ
0.5 GtCO2
![Page 6: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/6.jpg)
FIG URE 1 . 3 Comparison of cement and aggregate consumption in a structural application of C30 concrete and UHPC. The column profiles shown on the left are designed to carry an
axial load of 3000 kg. Buckling deformations have been omitted (Sources: Stengel 2014; Voort 2008; Graphical representation: author).
Embodied Carbonenergy footprint
280 MJ 52 kgCO2
8 MJ 0.8 kgCO2
52 MJ 3.2 kgCO2
340 MJ 56 kgCO2
Embodied Carbonenergy footprint
104 MJ 20 kgCO2
4 MJ 0.4 kgCO2
108 MJ 20.4 kgCO2
Cement
Fine �llers
Coarse �llers
Total 320 kg/m
Cement
Fine �llers
Total 72 kg/m
C30 Concrete GradeCompressive strength 30 MPa
CementAlternative bindersWater
Fine �llers
Coarse �llers
12 tons 12 tons
Cement
Alternative bindersWater
Micro-�llers
Fine �llers
Plasticizer
Structural application
UHPFRCCompressive strength 150 MPa
100 mm400 mm
Actual material consumption at a structural case
Basic composition
Embodied Carbonenergy footprint
280 MJ 52 kgCO2
8 MJ 0.8 kgCO2
52 MJ 3.2 kgCO2
340 MJ 56 kgCO2
Embodied Carbonenergy footprint
104 MJ 20 kgCO2
4 MJ 0.4 kgCO2
108 MJ 20.4 kgCO2
Cement
Fine �llers
Coarse �llers
Total 320 kg/m
Cement
Fine �llers
Total 72 kg/m
C30 Concrete GradeCompressive strength 30 MPa
CementAlternative bindersWater
Fine �llers
Coarse �llers
12 tons 12 tons
Cement
Alternative bindersWater
Micro-�llers
Fine �llers
Plasticizer
Structural application
UHPFRCCompressive strength 150 MPa
100 mm400 mm
Actual material consumption at a structural case
Basic composition
![Page 7: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/7.jpg)
Embodied Carbonenergy footprint
280 MJ 52 kgCO2
8 MJ 0.8 kgCO2
52 MJ 3.2 kgCO2
340 MJ 56 kgCO2
Embodied Carbonenergy footprint
104 MJ 20 kgCO2
4 MJ 0.4 kgCO2
108 MJ 20.4 kgCO2
Cement
Fine �llers
Coarse �llers
Total 320 kg/m
Cement
Fine �llers
Total 72 kg/m
C30 Concrete GradeCompressive strength 30 MPa
CementAlternative bindersWater
Fine �llers
Coarse �llers
12 tons 12 tons
Cement
Alternative bindersWater
Micro-�llers
Fine �llers
Plasticizer
Structural application
UHPFRCCompressive strength 150 MPa
100 mm400 mm
Actual material consumption at a structural case
Basic composition
Embodied Carbonenergy footprint
280 MJ 52 kgCO2
8 MJ 0.8 kgCO2
52 MJ 3.2 kgCO2
340 MJ 56 kgCO2
Embodied Carbonenergy footprint
104 MJ 20 kgCO2
4 MJ 0.4 kgCO2
108 MJ 20.4 kgCO2
Cement
Fine �llers
Coarse �llers
Total 320 kg/m
Cement
Fine �llers
Total 72 kg/m
C30 Concrete GradeCompressive strength 30 MPa
CementAlternative bindersWater
Fine �llers
Coarse �llers
12 tons 12 tons
Cement
Alternative bindersWater
Micro-�llers
Fine �llers
Plasticizer
Structural application
UHPFRCCompressive strength 150 MPa
100 mm400 mm
Actual material consumption at a structural case
Basic composition
FIG URE 1 . 3 Comparison of cement and aggregate consumption in a structural application of C30 concrete and UHPC. The column profiles shown on the left are designed to carry an
axial load of 3000 kg. Buckling deformations have been omitted (Sources: Stengel 2014; Voort 2008; Graphical representation: author).
![Page 8: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/8.jpg)
2. Retooling in Concrete Industry
![Page 9: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/9.jpg)
2. Retooling in the Concrete Industry
![Page 10: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/10.jpg)
In Situ NC Precast NC Prefabricated GFRC Precast UHPC
Normal Reinforced Concrete
Glass Fibre Reinforced Concrete
High Performance Fiber Reinforced Concrete
0 1
meters
2 3
0 1
meters
2 3
0 1
meters
2 30 1
meters
2 30 1
meters
2 3
0 1
meters
2 3
0 1
meters
2 30 1
meters
2 3
0 10 20 30
meters
0 10 20 30
meters
![Page 11: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/11.jpg)
In-Situ Cast Normal Strength Concrete
0 10 20 30
meters
0 10 20 30
meters
![Page 12: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/12.jpg)
Project: Spencer Dock Bridge by AL_A (Future Systems) Source: nedcam.com
![Page 13: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/13.jpg)
![Page 14: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/14.jpg)
Precast Normal Strength Concrete
0 1
meters
2 3
0 1
meters
2 3
![Page 15: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/15.jpg)
Project: Neuer Zollhoff by Frank Gehry Source: Thomas Mayer
![Page 16: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/16.jpg)
Project: Neuer Zollhoff by Frank GehrySource: Thomas Mayer
![Page 17: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/17.jpg)
Glass Fibre Reinforced Concrete
Prefabricated GFRC
Glass Fibre Reinforced Concrete
0 1
meters
2 3
0 1
meters
2 30 1
meters
2 30 1
meters
2 3
![Page 18: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/18.jpg)
![Page 19: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/19.jpg)
![Page 20: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/20.jpg)
![Page 21: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/21.jpg)
FIG URE 1 . 17 An illustration of the adhesion of high-performance concrete to an expanded polystyrene mould (Hi-Con, 2017) (Source: Hi-Con A/S).
0 1 2 m
0 10 20 m 0 1 2 m
0 1 2 m
C. Prefabrication of glass fibre-reinforced concrete D. Prefabrication of ultra-high performance fibre-reinforced concrete.
A. In-situ casting of normal reinforced concrete
CNC milled parts of EPS formwork
B. Prefabrication of normal reinforced concrete;
Assembly of conventionalfalsework and EPS parts
CNC milled EPS mould
CNC milledEPS mould
Spraying GFRC
CNC milled mouldand countermould
Injectingself-compacting
UHFRPC
Steel frameinstallation
Finished element Finished element
Finished element
Manual placementof reinforcement
and concreteManual placementof reinforcement
and concrete
Finished monolithconcrete structure
Prefabrication of Ultra-High Performance Concrete
![Page 22: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/22.jpg)
..,,
![Page 23: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/23.jpg)
Ultra-High Performance Fibre Reinforced Concrete
0 1
meters
2 3
0 1
meters
2 30 1
meters
2 3
![Page 24: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/24.jpg)
FIGURE 1 . 18 A concrete prototype cast in water-soluble 3D-printed PVA formwork
(Source: Digital Building Technologies, ETHZ. Photo: Matthias Leschok).
FIGURE 1 . 19 TailorCrete project, a zero-waste wax formwork for concrete
(Source: ROK Rippmann Oesterle Knauss GmbH).
3. Emerging Methods of Digital Concrete Fabrication
![Page 25: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/25.jpg)
![Page 26: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/26.jpg)
Part 2
The Ice Formwork Concept
![Page 27: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/27.jpg)
Methodology of Experimental Programme
Phase 1 - Material Testing
Appendix 1 Appendix 2
Appendix 3 Appendix 4 Appendix 5 Appendix 6
Phase 0 - Thought Experiment Phase 2 - Design Probes and Production Prototyping
Phase 3 - Ecological Evaluation
![Page 28: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/28.jpg)
CNC Controls
Cold Chamber CNC mill
Ice Feedstock Production
Demoulding Reservoirs
Welding Station
Warm Raw Material Storage
Cement-Process Water Settling Tank
0 1 5 m
Warm Raw Material Storage
Cold Raw Materials
Cement-Process Water Settling Tank
0 1 5 m
Experimntal Rig 1 Experimntal Rig 3
![Page 29: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/29.jpg)
Phase 2.1
Ice manual processing
Experimental Rig 1
Area: 12 m2
Cold volume: 1.5 m3
![Page 30: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/30.jpg)
![Page 31: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/31.jpg)
FIG URE 2 . 28 Ice mould for the concrete panel 170721-ME-MUR1 produced
via thermal melting (see Film 2) (Source: author).
![Page 32: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/32.jpg)
FIG URE 2 . 35 A scale reference for 180611-ME-JULx (Source: author).
FIG URE 2 . 36 180611-ME-JULx during demoulding (Source: author).
![Page 33: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/33.jpg)
Phase 2.2
Ice manual processing
Experimental Rig 2
Area: 100 m2
Cold volume: 3.3 m3
![Page 34: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/34.jpg)
End mill
Machine settings
Tool rotation vs feed side:
Single Flute Straight Flat EndCutting diameter: 1/4 inCutting length: 1 in...
Speed: 9’000...15’000 rpmFeed: 2000 mm/min...
![Page 35: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/35.jpg)
FIG URE 2 . 39 The tile series 180423-DP-TILx cast in fine
processed ice moulds (Source: author).
![Page 36: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/36.jpg)
FIG URE 2 .43 The front and top view of the prototype 180622-DP-TER1 produced using fine CNC-
processing (Source: author).
FIG URE 2 .44 The prototype 180622-DP-TER1 during the demoulding process (Source: author).
FIG URE 2 .45 The surface quality detail of the prototype 180622-DP-TER1 (Source: author).
![Page 37: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/37.jpg)
FIG URE 2 .40 The prototype 180805-DP-APE1 made using a two-party ice
mould assembly (Source: author).
![Page 38: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/38.jpg)
#iceformwork
Experimental Rig 3.0
#iceformwork
Experimental Rig 3.0
Phase 2.3
Ice manual processing
Experimental Rig 3
Area: 389 m2
Cold volume: 54 m3
![Page 39: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/39.jpg)
#iceformwork
![Page 40: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/40.jpg)
FIG URE 2 .48 The 191116-DP-TER2 prototype (Source: author).
![Page 41: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/41.jpg)
![Page 42: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/42.jpg)
![Page 43: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/43.jpg)
![Page 44: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/44.jpg)
![Page 45: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/45.jpg)
0 1 5 10 cm
0 1 2 m
0 1 5 10 cm
0 1 2 m
0 1 5 10 cm
0 1 2 m
![Page 46: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/46.jpg)
![Page 47: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/47.jpg)
![Page 48: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/48.jpg)
FIG URE 2 . 55 The fixing detail and the back side of the 190912-DP-FAC2 prototype
(Source: author).
FIG URE 2 . 56 The ice mould assembly of the 190912-DP-FAC2 prototype
(Source: author).
![Page 49: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/49.jpg)
#iceformwork
Structural Analysis
#iceformwork
Structural Analysis
![Page 50: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/50.jpg)
![Page 51: Ice Formwork: Digital Fabrication, Complex Geometry and](https://reader031.fdocuments.net/reader031/viewer/2022021405/6208d804d33818421a5b0e07/html5/thumbnails/51.jpg)
#iceformwork
This project is a part of the Innochain Research Training Network. It has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642877. The experimental part of the work has been financially supported by the National Real Estate Board of Sweden (Statens Fastighetsverk) through Helgostipendier 2017, Helge Axon Foundation and ARQ.
@iceformwork
#iceformwork
This project is a part of the Innochain Research Training Network. It has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642877. The experimental part of the work has been financially supported by the National Real Estate Board of Sweden (Statens Fastighetsverk) through Helgostipendier 2017, Helge Axon Foundation and ARQ.
@iceformwork